Search NASA⌕ Search

SEARCH · Search NASA

Results for “Closed form solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Thin wire pointing method

A method is described for forming sharp tips on thin wires, in particular phosphor bronze wires of diameters such as one-thousandth inch used to contact micron size Schottky barrier diodes, which enables close control of tip shape and which avoids the use of highly toxic solutions. The method includes dipping an end of a phosphor bronze wire into a dilute solution of sulfamic acid and applying a current through the wire to electrochemically etch it. The humidity in the room is controlled to a level of less than 50%, and the voltage applied between the wire and another electrode in the solutions is a half wave rectified voltage. The current through the wire is monitored, and the process is stopped when the current falls to a predetermined low level.

Green, G.↗

MHD bending waves in a current sheet

Transverse MHD bending waves are considered in an isothermal and compressible two-dimensional current sheet of finite thickness in which the magnetic field changes direction and strength. The general form of the wave equation is obtained. It is shown that rotation of the magnetic field across the current sheet prevents the existence of singular points so that continuous spectrum solutions and the concomitant wave decay disappear. Instead, normal modes exist and closed integral solution for arbitrary current sheet structure are found. The results are discussed in terms of small-scale waves on the heliospheric current sheet.

Musielak, Z. E.↗

Techniques for developing approximate optimal advanced launch system guidance

An extension to the authors' previous technique used to develop a real-time guidance scheme for the Advanced Launch System is presented. The approach is to construct an optimal guidance law based upon an asymptotic expansion associated with small physical parameters, epsilon. The trajectory of a rocket modeled as a point mass is considered with the flight restricted to an equatorial plane while reaching an orbital altitude at orbital injection speeds. The dynamics of this problem can be separated into primary effects due to thrust and gravitational forces, and perturbation effects which include the aerodynamic forces and the remaining inertial forces. An analytic solution to the reduced-order problem represented by the primary dynamics is possible. The Hamilton-Jacobi-Bellman or dynamic programming equation is expanded in an asymptotic series where the zeroth-order term (epsilon = 0) can be obtained in closed form.

Feeley, Timothy S.↗

Nuclear Naval Propulsion: A Feasible Proliferation Pathway?

There is no better time than now to close the loophole in Article IV of the Nuclear Non-proliferation Treaty (NPT) that excludes military uses of fissile material from nuclear safeguards. Several countries have declared their intention to pursue and develop naval reactor technology, including Argentina, Brazil, Iran, and Pakistan, while other countries such as China, India, Russia, and the United States are expanding their capabilities. With only a minority of countries using low enriched uranium (LEU) fuel in their naval reactors, it is possible that a state could produce highly enriched uranium (HEU) under the guise of a nuclear navy while actually stockpiling the material for a nuclear weapon program. This paper examines the likelihood that non-nuclear weapon states exploit the loophole to break out from the NPT and also the regional ramifications of deterrence and regional stability of expanding naval forces. Possible solutions to close the loophole are discussed, including expanding the scope of the Fissile Material Cut-off Treaty, employing LEU fuel instead of HEU fuel in naval reactors, amending the NPT, creating an export control regime for naval nuclear reactors, and forming individual naval reactor safeguards agreements.

export controls↗

Unified wavefront singularity characterization of three-dimensional elastodynamic time-domain half-space Green's function under impulsive boundary and internal loads

Founded on a novel analytical formulation that led to a rigorous yet compact path-integral representation of the time-domain elastodynamic half-space Green's function, a unified analysis of the possible occurrence of different singular wavefront behaviour in the response under arbitrary impulsive internal or surface point loads at arbitrary source-receiver locations is presented. With the decomposition of the general solution into distinct initiating and reflected wave group integrals that share a common factored format and simple contour definitions, the mathematical framework is shown to allow a straightforward identification of the specific conditions and the particular wave groups that are responsible for the singular wavefront phenomena without resorting to advanced analytic function theories or asymptotic methods. Analytic characterizations of the nature, strength and direction of all intrinsic singular wavefront behaviours of the three-dimensional Green's function in three canonical cases of source-receiver configurations are given in a dual integral-closed form format to facilitate their theoretical understanding as well as computational applications. Graphical illustrations of their variation with the source-receiver configuration and the medium's Poisson's ratio together with relevant comparison and clarifications of some classical treatments are included.

Green’s functions↗

Dark solitons in cigar-shaped Bose-Einstein condensates in double-well potentials

We study the statics and dynamics of dark solitons in a cigar-shaped Bose-Einstein condensate confined in a double-well potential. Using a mean-field model with a noncubic nonlinearity, appropriate to describe the dimensionality crossover regime from one- to three-dimensional, we obtain branches of solutions in the form of single and multiple dark soliton states, and study their bifurcations and stability. It is demonstrated that there exist dark soliton states which do not have a linear counterpart and we highlight the role of anomalous modes in the excitation spectra. Particularly, we show that anomalous mode eigenfrequencies are closely connected to the characteristic soliton frequencies as found from the solitons' equations of motion, and how anomalous modes are related to the emergence of instabilities. We also analyze in detail the role of the height of the barrier in the double-well setting, which may lead to instabilities or decouple multiple dark soliton states.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An Engineering Solution for Solving Mesh Size Effects in the Simulation of Delamination with Cohesive Zone Models

This paper presents a methodology to determine the parameters to be used in the constitutive equations of Cohesive Zone Models employed in the simulation of delamination in composite materials by means of decohesion finite elements. A closed-form expression is developed to define the stiffness of the cohesive layer. A novel procedure that allows the use of coarser meshes of decohesion elements in large-scale computations is also proposed. The procedure ensures that the energy dissipated by the fracture process is computed correctly. It is shown that coarse-meshed models defined using the approach proposed here yield the same results as the models with finer meshes normally used for the simulation of fracture processes.

FROM↗

Interparticle Interactions in Dilute Solutions of Polyelectrolyte Complex Micelles.

The application of dilute solutions of poly electrolyte complex (PEC) micelles for delivering therapeutic nucleic acids into disease sites has gained momentum. This Letter reports a detailed characterization of PEC micelles in dilute solutions including their internal structures and the determination of the interparticle interactions. The polymer concentration ranges from 0.1 to 0.5 wt %, a regime where micelle-micelle interactions are infrequent. We employ synchrotron small-angle X-ray scattering (SAXS) to simultaneously probe the morphology, internal structure, and radius of gyration (R-g) of the self-assemblies formed by charged diblock polyelectrolytes and homopolyelectrolytes. The emerging appearance of the structure factor in SAXS profiles with the increasing polymer concentration demonstrates the presence of the repulsive intermicellar correlations, which is further confirmed by the differences between the "reciprocal R-g" estimated by Guinier approximation and the "real space R-g" determined by pair distribution functions. We find that the soft corona chains tethered on the surface of phase-separated complex domains are compressed when micelles come close to the point where a hard-sphere interaction takes over. These findings contribute to the fundamental understanding of the structure and space-filling constraints in the complexation-driven self-assemblies and advance the rational design of cationic polymer-based nonviral gene delivery vectors.

Wu, Hao↗

Tree-inspired lignin microrods-based composite heterogeneous nanochannels for ion transport and osmotic energy harvesting

One of the key processes of tree lignification is that lignin penetrates into the cell wall and fills in the cell wall framework, thereby increasing the hardness and hydrophobic of the tree channels, which is beneficial to consolidate and support the tree cell wall and water transport. Inspired by this natural process, we demonstrated a lignin-based nanofluidic heterogeneous membrane that closely mimics the channels in tree, which can realize ion transport function and effectively capture reverse electrodialysis. The membrane was synthesized by heating dealkaline lignin and PVA at 200 °C and this formed fusiform microrods and a closed-packed membrane. Simultaneously, this membrane composited with anodized aluminum (AAO) channels membrane at 200 °C to form asymmetric heterogeneous nanochannels membrane, which can transport counter-ions and harvest osmotic energy. This membrane implements ion current rectification in 0.1 M KCl electrolyte solution at pH 3 due to the confinement of pores and opposite surface charges in lignin-based heterogeneous nanochannel. An output power density of 0.97 W m- 2 is obtained under a 50-fold salinity gradient, which can be further improved to 1.19 W m -2 by increasing the salinity gradient from 50-fold to 500-fold. Accordingly, this nanofluidic membranes were prepared by using lignin, the key component in tree, which not only mimicked a crucial process of the water and ionic transport process of channels in tree, but also had the prospect in the field of osmotic energy harvesting.

09 BIOMASS FUELS↗

The influence of gravitational body force in meteoritic chondrule and lunar glass formation

The effects of gravitational body force must be considered in the formation of extraterrestrial materials such as meteoritic chondrules and lunar glasses. Solidification experiments conducted in microgravity as well as g values greater than Earth's gravitational force have demonstrated that gravitational force can have profound and sometimes unexpected effects upon the way materials solidify and, therefore, upon their physical and mechanical properties. Solutal, thermal and sedimentation effects differ from those experienced on Earth. Because buoyancy forces are reduced, materials of different densities may remain in close proximity. The spherical morphology of chondrules and many lunar glasses may reflect the tendency for free floating liquids to form spherical droplets in a microgravity environment, a form which minimizes surface energy. Under these conditions, surface energy forces dominate gravity forces. The formation of two common chondrule textures, barred and radiating chondrules, can be explained using observations from glass science.

Budka, P. Z.↗

Amorphous 1-D nanowires of calcium phosphate/pyrophosphate: A demonstration of oriented self-growth of amorphous minerals

Amorphous inorganic solids are traditionally isotropic, thus, it is believed that they only grow in a non-preferential way without the assistance of regulators, leading to the morphologies of nanospheres or irregular aggregates of nanoparticles. However, in the presence of (ortho)phosphate (Pi) and pyrophosphate ions (PPi) which have synergistic roles in biomineralization, the highly elongated amorphous nanowires (denoted ACPPNs) form in a regulator-free aqueous solution (without templates, additives, organics, etc). Based on thorough characterization and tracking of the formation process (e.g., Cryo-TEM, spherical aberration correction high resolution TEM, solid state NMR, high energy resolution monochromated STEM-EELS), the microstructure and its preferential growth behavior are elucidated. In ACPPNs, amorphous calcium orthophosphate and amorphous calcium pyrophosphate are distributed at separated but close sites. The ACPPNs grow via either the preferential attachment of ~2 nm nanoclusters in a 1-dimension way, or the transformation of bigger nanoparticles, indicating an inherent driving force-governed process. Here, we propose that the anisotropy of ACPPNs microstructure, which is corroborated experimentally, causes their oriented growth. This study proves that, unlike the conventional view, amorphous minerals can form via oriented growth without external regulation, demonstrating a novel insight into the structures and growth behaviors of amorphous minerals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phyllosilicate Formation on Early Mars Via Open-System Acid Alteration of Basaltic Glass

Smectites are widespread on Mars, but neutral/alkaline conditions favorable for smectite formation have surprisingly not led to abundant carbonates. Smectite formation on Mars could also occur in acidic environments unfavorable for carbonate formation. Acidic smectite formation has been demonstrated in batch (closed hydrologic) systems, however, the mechanisms and octahedral composition of smectite forming in acidic flow-through (open hydrologic) systems are not fully understood. Stapafell basaltic glass was hydrothermally altered (190◦C) at two flow rates corresponding to low and high water to rock ratio (W/R) and initial pH (pH_0) values of 2, 3, 4 and 6, and a batch low W/R experiment was conducted at pH_0 2. Kaolinite, montmorillonite and chlorite formed at pH_0 2 at low W/R; no phyllosilicates formed at pH_0 2 at high W/R; and lizardite formed at pH_0 ≥3 at both W/R ratios. Lizardite, kaolinite, and montmorillonite in these experiments formed by precipitation from solution and chlorite likely formed through alteration of montmorillonite and/or basalt. Saponite formed at pH_0 2 in batch conditions by alteration of basaltic glass. Comparison of experimental data with martian phyllosilicate assemblages indicated that smectite formation on Mars likely occurred under water-limited conditions. Al-rich smectite could form in open-system low W/R subsurface environments under a narrow range of pH (pH <3) while saponite could form in closed low W/R systems under acidic to alkaline conditions. Combined open and closed hydrological regimes could be responsible for development of clay mineral stratigraphies observed on Mars. The acidic conditions required for formation of Al-rich smectite were unfavorable for carbonate precipitation, but carbonate precipitation could occur together with Fe/Mg-smectite in closed systems at pH >4. The lack of carbonates occurring together with Fe/Mg-smectite could be cause by low pCO2 in subsurface closed environments and/or by overall lack of carbonate precipitation despite significant oversaturation.

S J Ralston↗

Applications of Automation Methods for Nonlinear Fracture Test Analysis

Using automated and standardized computer tools to calculate the pertinent test result values has several advantages such as: 1. allowing high-fidelity solutions to complex nonlinear phenomena that would be impractical to express in written equation form, 2. eliminating errors associated with the interpretation and programing of analysis procedures from the text of test standards, 3. lessening the need for expertise in the areas of solid mechanics, fracture mechanics, numerical methods, and/or finite element modeling, to achieve sound results, 4. and providing one computer tool and/or one set of solutions for all users for a more "standardized" answer. In summary, this approach allows a non-expert with rudimentary training to get the best practical solution based on the latest understanding with minimum difficulty.Other existing ASTM standards that cover complicated phenomena use standard computer programs: 1. ASTM C1340/C1340M-10- Standard Practice for Estimation of Heat Gain or Loss Through Ceilings Under Attics Containing Radiant Barriers by Use of a Computer Program 2. ASTM F 2815 - Standard Practice for Chemical Permeation through Protective Clothing Materials: Testing Data Analysis by Use of a Computer Program 3. ASTM E2807 - Standard Specification for 3D Imaging Data Exchange, Version 1.0 The verification, validation, and round-robin processes required of a computer tool closely parallel the methods that are used to ensure the solution validity for equations included in test standard. The use of automated analysis tools allows the creation and practical implementation of advanced fracture mechanics test standards that capture the physics of a nonlinear fracture mechanics problem without adding undue burden or expense to the user. The presented approach forms a bridge between the equation-based fracture testing standards of today and the next generation of standards solving complex problems through analysis automation.

Allen, Phillip A.↗

Electrochemical formation of hydroxide for enhancing carbon dioxide and acid gas uptake by a solution

A system is described for forming metal hydroxide from a metal carbonate utilizing a water electrolysis cell having an acid-producing anode and a hydroxyl-producing cathode immersed in a water solution of sufficient ionic content to allow an electric current to pass between the hydroxyl-producing cathode and the acid-producing anode. A metal carbonate, in particular water-insoluble calcium carbonate or magnesium carbonate, is placed in close proximity to the acid-producing anode. A direct current electrical voltage is provided across the acid-producing anode and the hydroxyl-producing cathode sufficient to generate acid at the acid-producing anode and hydroxyl ions at the hydroxyl-producing cathode. The acid dissolves at least part of the metal carbonate into metal and carbonate ions allowing the metal ions to travel toward the hydroxyl-producing cathode and to combine with the hydroxyl ions to form the metal hydroxide. The carbonate ions travel toward the acid-producing anode and form carbonic acid and/or water and carbon dioxide. Among other uses, the metal hydroxide formed can be employed to absorb acid gases such as carbon dioxide from a gas mixture. The invention can also generate hydrogen and oxidative gases such as oxygen or chlorine.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Micropolar Elastoplasticity Using a Fast Fourier Transform‐Based Solver

ABSTRACT This work presents a micromechanical spectral formulation for obtaining the full‐field and homogenized response of elastoplastic micropolar composites. A closed‐form radial‐return mapping is derived from thermodynamics‐based micropolar elastoplastic constitutive equations to determine the increment of plastic strain necessary to return the generalized stress state to the yield surface, and the algorithm implementation is verified using the method of numerically manufactured solutions. Then, size‐dependent material response and micro‐plasticity are shown as features that may be efficiently simulated in this micropolar elastoplastic framework. The computational efficiency of the formulation enables the generation of large datasets in reasonable computing times.

42 ENGINEERING↗

Lie algebraic approach to the time-dependent quantum general harmonic oscillator and the bi-dimensional charged particle in time-dependent electromagnetic fields

We discuss the one-dimensional, time-dependent general quadratic Hamiltonian and the bi-dimensional charged particle in time-dependent electromagnetic fields through the Lie algebraic approach. Such method consists in finding a set of generators that form a closed Lie algebra in terms of which it is possible to express a quantum Hamiltonian and therefore the evolution operator. The evolution operator is then the starting point to obtain the propagator as well as the explicit form of the Heisenberg picture position and momentum operators. First, the set of generators forming a closed Lie algebra is identified for the general quadratic Hamiltonian. This algebra is later extended to study the Hamiltonian of a charged particle in electromagnetic fields exploiting the similarities between the terms of these two Hamiltonians. These results are applied to the solution of five different examples: the linear potential which is used to introduce the Lie algebraic method, a radio frequency ion trap, a Kanai–Caldirola-like forced harmonic oscillator, a charged particle in a time dependent magnetic field, and a charged particle in constant magnetic field and oscillating electric field. In particular we present exact analytical expressions that are fitting for the study of a rotating quadrupole field ion trap and magneto-transport in two-dimensional semiconductor heterostructures illuminated by microwave radiation. In these examples we show that this powerful method is suitable to treat quadratic Hamiltonians with time dependent coefficients quite efficiently yielding closed analytical expressions for the propagator and the Heisenberg picture position and momentum operators. -- Highlights: •We deal with the general quadratic Hamiltonian and a particle in electromagnetic fields. •The evolution operator is worked out through the Lie algebraic approach. •We also obtain the propagator and Heisenberg picture position and momentum operators. •Analytical expressions for a rotating quadrupole field ion trap are presented. •Exact solutions for magneto-transport in variable electromagnetic fields are shown.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A novel magnetically separable TiO{sub 2}/CoFe{sub 2}O{sub 4} nanofiber with high photocatalytic activity under UV-vis light

Graphical abstract: A novel magnetically separable composite photocatalyst TiO{sub 2}/CoFe{sub 2}O{sub 4} nanofiber was prepared by sol-gel method and electrospinning technique, which can be reclaimed with a magnet, and the decolorizing efficiency of MB solution reached 95.87%. Highlights: Black-Right-Pointing-Pointer The composite TiO{sub 2}/CoFe{sub 2}O{sub 4} nanofibers with diameter of 110 {+-} 28 nm have been successfully synthesized by the combination of sol-gel method and electrospinning technique. Black-Right-Pointing-Pointer The presence of Co{sup 2+} or/and Fe{sup 3+} ions may occupy some of the lattice sites of TiO{sub 2} to form an iron-titanium solid solution and narrow the band gap, which broadens the response region of visible light. Black-Right-Pointing-Pointer The resultant nanofibers not only have high decomposition efficiency with methylene blue (MB) under the UV irradiation, which is close to that of Degussa P25, but also can be separated with a magnet and avoid the secondary pollution of the treated water. -- Abstract: A novel magnetically separable heterogeneous photocatalyst TiO{sub 2}/CoFe{sub 2}O{sub 4} nanofiber was prepared by sol-gel method and electrospinning technology, followed by heat treatment at 550 Degree-Sign C for 2 h. The phase structure, morphology and magnetic property of the composite nanofibers were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscope and vibrating sample magnetometer analysis. The photocatalytic studies of TiO{sub 2}/CoFe{sub 2}O{sub 4} fibers suggested that the presence of CoFe{sub 2}O{sub 4} not only enhanced the absorbance of UV light, but also broadened the response region to visible light. The decolorizing efficiency of methylene blue (MB) solution reaches 95.87% over TiO{sub 2}/CoFe{sub 2}O{sub 4} nanofibers under 300 W Hg lamp after 5 h, which is close to that of Degussa P25. Furthermore, these fibers can be collected with a magnet for reuse and effectively avoid the secondary pollution of the treated water.

36 MATERIALS SCIENCE↗

Group Hexavalent Actinide Separations: A New Approach to Used Nuclear Fuel Recycling

Hexavalent Np, Pu, and Am individually, and as a group, have all been cocrystallized with UO 2 (NO 3 ) 2 ∙ 6H 2 O, constituting the first demonstration of an An(VI) group cocrystalliza- tion. The hexavalent dioxo cations of Np, Pu, and Am cocrystallize with UO 2 (NO 3 ) 2 ∙ 6H 2 O in near proportion with a simple reduction in temperature, while the lower valence states, An(III) and An(IV), are only slightly removed from solution. A separation of An(VI) species from An(III) ions by crystallization has been demonstrated, with an observed separation factor of 14. Separation of An(VI) species from key fission products, 95 Zr, 95 Nb, 137 Cs, and 144 Ce, has also been demonstrated by crystallization, with separation factors ranging from 6.5 to 71 in the absence of Am(VI), while in the presence of Am(VI), the separation factors were reduced to 0.99 7.7. One interesting observation is that Am(VI) shows increased stability in the cocrystallized form, with no reduction observed after 13 days, as opposed to in solution, in which >50% is reduced after only 10 days. The ability to cocrystallize and stabilize hexavalent actinides from solution, especially Am(VI), introduces a new separations approach that can be applied to closing the nuclear fuel cycle.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗