Search NASA⌕ Search

SEARCH · Search NASA

Results for “DEACTIVATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Recombination of O2/+/ in the ionosphere

In spite of the excellent agreement between various laboratory measurements of the recombination rate of O2(+) with electrons, it is still questionable whether the laboratory results apply in the ionosphere, because although the radiative lifetime of vibrating O2(+) is not well known, indications are that it may be very long. Whether the laboratory results apply in the atmosphere depends on whether the recombination rate is dependent on the vibrational state of the O2(+) ion and on whether the ions are deactivated (or not) in both the laboratory experiments and the atmosphere prior to recombination. To obtain reliable answers to these questions, the present study was carried out to determine the recombination of O2(+) in the ionosphere from in situ measurements of the relevant temperatures and densities made by the open source mass spectrometer carried by the AE-C satellite. The photochemistry involved is discussed. The results show that the ionospheric determination of the recombination rate of O2(+) with electrons agrees with the laboratory measurements of Walls and Dunn (1974) for electron temperatures between 1200 and 2000 K.

Torr, D. G.↗

Some aspects of the stratospheric Cl-ClO-Cl cycle - Possible roles of ClO, ClNO3 and HOCl

The possible inhibitory effect of excited ClO produced during chlorine-sensitized ozone decomposition on the stratospheric Cl-ClO-Cl cycle is investigated. Collisional deactivation of excited ClO is discussed, chemical reactions involving excited ClO are examined, and the possible roles of HO2 and NO2 in weakening the Cl-ClO-Cl cycle are evaluated. It is noted that the formation of HOCl through a reaction between ClO and HO2 implies that the Cl-ClO-Cl cycle has not been completed.

Prasad, S. S.↗

Overload protection system for power inverter

An overload protection system for a power inverter utilized a first circuit for monitoring current to the load from the power inverter to detect an overload and a control circuit to shut off the power inverter, when an overload condition was detected. At the same time, a monitoring current inverter was turned on to deliver current to the load at a very low power level. A second circuit monitored current to the load, from the monitoring current inverter, to hold the power inverter off through the control circuit, until the overload condition was cleared so that the control circuit may be deactivated in order for the power inverter to be restored after the monitoring current inverter is turned off completely.

Nagano, S.↗

Optical conversion method

An optical pickup comprising an electrooptical device located between two crossed polarizing devices all positioned along a common optical axis is described for switching a TV system between a color mode and a black and white mode. Embodiments in which the electrooptical system is used as a neutral density filter, a selective color filter, or a light shutter as applied to a television camera are described. Where the optical system is used as a selective color filter to produce light beams of alternating color in a field sequential color television system, deactivation of the optical system renders the television a black and white system.

Perry, W. E.↗

Experiments concerning the laser-enhanced reaction between vibrationally excited O3 and NO

The enhancement in reaction rate between O3 and NO is studied for the case of O3 vibrationally excited by a CO2 laser. Chemiluminescence observations of a vibrationally excited and an electronically excited nitrogen dioxide reaction product provide information on the separate contributions to the overall reaction rate of these two reactive channels. The contribution of the stretching and bending modes of O3 to the reaction rate enhancement is also discussed. In addition, consideration is given to the nonreactive vibrational deactivation of vibrationally excited O3.

Hui, K.-K.↗

System for and method of freezing biological tissue

Biological tissue is frozen while a polyethylene bag placed in abutting relationship against opposed walls of a pair of heaters. The bag and tissue are cooled with refrigerating gas at a time programmed rate at least equal to the maximum cooling rate needed at any time during the freezing process. The temperature of the bag, and hence of the tissue, is compared with a time programmed desired value for the tissue temperature to derive an error indication. The heater is activated in response to the error indication so that the temperature of the tissue follows the desired value for the time programmed tissue temperature. The tissue is heated to compensate for excessive cooling of the tissue as a result of the cooling by the refrigerating gas. In response to the error signal, the heater is deactivated while the latent heat of fusion is being removed from the tissue while the tissue is changing phase from liquid to solid.

Williams, T. E.↗

Satellite Power System (SPS) microwave subsystem impacts and benefits

The impacts and benefits to society of the microwave subsystem resulting from the developing, construction and operating of a space solar power to earth, electric power delivery system are presented and discussed. The primary benefit (usable energy) is conveyed mainly in the fundamental frequency portion of the RF radiation beam that is intercepted and converted to electric power output. The small fraction of the microwave and other electromagnetic energy that does not end up in the electric utility grid, yields most of the subsystem impacts. The impacts range from harmonics and noise radiated by the transmitting antenna, through potential interference with ionospheric communications and navigation caused by the power beam heating the ionosphere, to the potential large land area requirements for the rectennas and low level microwave radiation around the rectennas. Additional benefits range from a very low level of waste heat liberated and lack of atmospheric emissions including noise while operating to having no residual ionizing radiation from the rectenna when it is deactivated.

Dickinson, R. M.↗

Silicon Materials Task of the Low Cost Solar Array Project, Phase 3. Effect of Impurities and Processing on Silicon Solar Cells

The effects of impurities, various thermochemical processes, and any impurity process interactions on the performance of terrestrial silicon solar cells are defined. Determinations of the segregation coefficients of tungsten, tantalum, and cobalt for the Czochralski pulling of silicon single crystals are reported. Sensitive neutron activation analysis was used to determine the metal impurity content of the silicon while atomic absorption was used to measure the metal content of the residual liquid from which the doped crystals were grown. Gettering of Ti doped silicon wafers improved cell performance by one to two percent for the highest temperatures and longest times. The HCl is more effective than POCl3 treatments for deactivating Ti but POCl3 and HCl produced essentially identical results for Mo or Fe.

Hopkins, R. H.↗

Nonequilibrium radiative heating of a Jovian entry body

The influence of nonlocal thermodynamic equilibrium (NLTE) radiative transfer on radiative and convective heating of a Jovian entry body is investigated. The flow in the shock layer is assumed to be axisymmetric, viscous, and in chemical equilibrium. The chemical species considered for the collisional deactivation processes are H2, H, H+. The NLTE radiative transfer equations are derived for multilevel energy transitions. The rotational and vibrational energy modes are assumed to be in local thermodynamic equilibrium. The results indicate that higher-level energy transitions have little influence on the overall NLTE results. The NLTE results, however, are found to be greatly influenced by the temperature distributions in the shock layer. The convective and radiative heating to the entry body are reduced significantly because of the NLTE conditions; the reduction in convective heating, however, is relatively small. The influence of NLTE is found to be greater at higher entry altitudes.

Tiwari, S. N.↗

Photoacoustic spectroscopy of condensed matter

Photoacoustic spectroscopy is a new analytical tool that provides a simple nondestructive technique for obtaining information about the electronic absorption spectrum of samples such as powders, semisolids, gels, and liquids. It can also be applied to samples which cannot be examined by conventional optical methods. Numerous applications of this technique in the field of inorganic and organic semiconductors, biology, and catalysis have been described. Among the advantages of photoacoustic spectroscopy, the signal is almost insensitive to light scattering by the sample and information can be obtained about nonradiative deactivation processes. Signal saturation, which can modify the intensity of individual absorption bands in special cases, is a drawback of the method.

Somoano, R. B.↗

CATCOM catalyst 5 atm 1000 hour aging study using No. 2 fuel oil

The durability of the CATCOM catalyst for use in catalytically supported thermal combustion has been demonstrated at 5 atm, complementing a previous 1000 hour durability study at 1 atm. Both of these studies were conducted at about 640 K air preheat temperature at a reference velocity of about 14 m/s; the adiabatic flame temperature of the fuel/air mixture was about 1530 K. The catalyst proved to be capable of low emissions operations after 1000 hours of diesel fuel aging. However, more severe deactivation occurred in the 5 atm test; this was attributed to a loss in kinetic (ignition) activity.

Osgerby, I. T.↗

CF6-50 Short Core Exhaust Nozzle

The General Electric CF6-50 engine nacelle was originally equipped with both fan nozzle and core nozzle thrust reversers. Many airline operators later deactivated the core reverser. Elimination of the core reverser enabled design changes to be made to help improve performance. A reduction in core nozzle length of approximately two feet was possible. This concept, defined as the Short Core Exhaust Nozzle, was evaluated in engine ground tests, including performance, acoustic, and endurance tests under the NASA/Lewis Engine Component Improvement Program. The test results verified the performance predictions from scale model tests. The Short Core Exhaust Nozzle provides an internal cruise SFC reduction of 0.9% without an increase in engine noise. The nozzle hardware successfully completed 1000 flight cycles of endurance testing with no signs of distress.

Dusa, D. J.↗

Energy-transfer mechanisms in the CH3F-SF6 optically pumped laser

The power of an optically pumped CH3F laser operating on the 496-micron line has been doubled with the addition of SF6 without any corresponding increase in pump absorption. It is suggested that a near-resonant energy transfer between CH3F and SF6 followed by SF6 deactivation is the mechanism responsible for the enhancement.

Lawandy, N. M.↗

Atmospheric quenching of vibrationally excited O2/1 Delta/

The paper presents photolysis absorption spectroscopy experimental results which show rapid vibrational quenching of O2(1 Delta, v not less than 1) molecular oxygen fragments in an atmospheric environment. The reactions of this species were determined by flash photolysis of ozone in the Hartley band combined with absorption spectroscopic detection of O2(1 Delta v equals 0) fragments and resonance fluorescence detection of O(3P). It was shown that rapid vibrational deactivation occurs under atmospheric conditions; in addition, an upper limit was determined for the photolytic channel of the O(1D) + O3 yields O2(1 Sigma) reaction.

Klais, O.↗

Health and safety: Preliminary comparative assessment of the Satellite Power System (SPS) and other energy alternatives

Data readily available from the literature were used to make an initial comparison of the health and safety risks of a fission power system with fuel reprocessing; a combined-cycle coal power system with a low-Btu gasifier and open-cycle gas turbine; a central-station, terrestrial, solar photovoltaic power system; the satellite power system; and a first-generation fusion system. The assessment approach consists of the identification of health and safety issues in each phase of the energy cycle from raw material extraction through electrical generation, waste disposal, and system deactivation; quantitative or qualitative evaluation of impact severity; and the rating of each issue with regard to known or potential impact level and level of uncertainty.

Habegger, L. J.↗

Silicon materials task of the low-cost solar array project. Phase 4: Effects of impurities and processing on silicon solar cells

The results of the study form a basis for silicon producers, wafer manufacturers, and cell fabricators to develop appropriate cost-benefit relationships for the use of less pure, less costly solar grade silicon. Cr is highly mobile in silicon even at temperatures as low as 600 C. Contrasting with earlier data for Mo, Ti, and V, Cr concentrations vary from place to place in polycrystalline silicon wafers and the electrically-active Cr concentration in the polysilicon is more than an order of magnitude smaller than would be projected from single crystal impurity data. We hypothesize that Cr diffuses during ingot cooldown after growth, preferentially segregates to grain and becomes electrically deactivated. Accelerated aging data from Ni-contaminated silicon imply that no significant impurity-induced cell performance reduction should be expected over a twenty year device lifetime.

Hopkins, R. H.↗

Application of a tip-fin controller to the Shuttle Orbiter for improved yaw control

Aerodynamic and flight control analyses have shown that the application of the tip-fin controller and removal of the centerline vertical tail does not produce improved flyability of the Shuttle Orbiter in the supersonic speed regime. Preliminary design studies show that removal of the centerline vertical tail and the installation of tip-fin controllers could result in savings up to 900 kg. It is also shown that the reaction control system could be deactivated much sooner than it is possible with the present nominal orbiter configuration.

Powell, R. W.↗