Search NASA⌕ Search

SEARCH · Search NASA

Results for “Data fitting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Probing AGN with Masers and X-Rays-SAX Proposals

We have made BeppoSAX observations of the Seyfert 2/1.9 galaxy ESO103-G35, which contains a nuclear maser source and is known to be heavily absorbed in the X-rays. Analysis of the X-ray spectra observed by SAX in October 1996 and 1997 yields an energy index = 0.74 +/- 0.07, typical of Seyfert galaxies and consistent with earlier observations of this source. The strong, soft X-ray absorption has a column density, N_H of (1.79 +/- 0.09)E23 cmE-02, again consistent with earlier results. The best fitting spectrum is that of a power law with a high energy cutoff at 29 +/- 10 keV, a cold (E=6.3 +/- 0.1 keV, rest frame), marginally resolved (sigma = 0.35 +/- 0.14 keV, FWHM approximately (31 +/- 12)E03 km/s) FeKalpha line with EW 290 +100 -80 eV (1996) and a mildly ionized Fe K-edge at 7.37 +0.15 -0.21 keV, tau 0.24 +0.06 -0.09. The Fe Kalpha line and cold absorption are consistent with origin in a accretion disk/torus through which our line-of-sight passes at a radial distance of approximately 0.01 pc. The Fe K-edge is mildly ionized suggesting the presence of ionized gas probably in the inner accretion disk, close to the central source or in a separate warm absorber. The data quality is too low to distinguish between these possibilities but the edge-on geometry implied by the water maser emission favors the former. Comparison with earlier observations of ESO103-G35 shows little/no change in spectral parameters while the flux changes by factors of a few on timescales of a few months. The 2-10 keV flux decreased by a factor of approximately 2.7 between Oct 1996 and Oct 1997 with no detectable change in the count rate greater than 20 keV (i.e. the PDS data). Spectral fits to the combined datasets indicate either a significant hardening of the spectrum (energy index approximately 0.5) or an approximate constant or delayed response reflection component. The high energy cutoff (29 +/- 10 keV) is lower than the typical approximately 300 keV values seen in Seyfert galaxies. A significant subset of similar sources would affect current models of the AGN contribution to the cosmic X-ray background (CXRB) which generally assume a high energy cutoff of approximately 300 keV.

Wilkes, Belinda J.↗

Fundamental Study of Material Flow in Friction Stir Welds

The presented research project consists of two major parts. First, the material flow in solid-state, friction stir, butt-welds as been investigated using a marker insert technique. Changes in material flow due to welding parameter as well as tool geometry variations have been examined for different materials. The method provides a semi-quantitative, three-dimensional view of the material transport in the welded zone. Second, a FSW process model has been developed. The fully coupled model is based on fluid mechanics; the solid-state material transport during welding is treated as a laminar, viscous flow of a non-Newtonian fluid past a rotating circular cylinder. The heat necessary for the material softening is generated by deformation of the material. As a first step, a two-dimensional model, which contains only the pin of the FSW tool, has been created to test the suitability of the modeling approach and to perform parametric studies of the boundary conditions. The material flow visualization experiments agree very well with the predicted flow field. Accordingly, material within the pin diameter is transported only in the rotation direction around the pin. Due to the simplifying assumptions inherent in the 2-D model, other experimental data such as forces on the pin, torque, and weld energy cannot be directly used for validation. However, the 2-D model predicts the same trends as shown in the experiments. The model also predicts a deviation from the "normal" material flow at certain combinations of welding parameters, suggesting a possible mechanism for the occurrence of some typical FSW defects. The next step has been the development of a three-dimensional process model. The simplified FSW tool has been designed as a flat shoulder rotating on the top of the workpiece and a rotating, cylindrical pin, which extends throughout the total height of the flow domain. The thermal boundary conditions at the tool and at the contact area to the backing plate have been varied to fit experimental data such as temperature profiles, torque and tool forces. General aspects of the experimentally visualized material flow pattern are confirmed by the 3-D model.

Reynolds, Anthony P.↗

A consistent dataset for the net income distribution for 190 countries and aggregated to 32 geographical regions from 1958 to 2015

Abstract. Data on income distributions within and across countries are becoming increasingly important for informing analysis of income inequality and understanding the distributional consequences of climate change. While datasets on income distribution collected from household surveys are available for multiple countries, these datasets often do not represent the same concept of inequality (or income concept) and therefore make comparisons across countries, over time and across datasets difficult. Here, we present a consistent dataset of income distributions across 190 countries from 1958 to 2015 measured in terms of net income. We complement the observed values in this dataset with values imputed from a summary measure of the income distribution, specifically the Gini coefficient. For the imputation, we use a recently developed nonparametric principal-component-based approach that shows an excellent fit to data on income distributions compared to other approaches. We also present another version of this dataset aggregated from the country level to 32 geographical regions. Our dataset is developed for the purpose of calibrating models such as integrated human–Earth system models with detailed data on income distributions. This dataset will enable more robust analysis of income distribution at multiple scales. The latest version of our data are available on Zenodo: https://doi.org/10.5281/zenodo.7093997 (Narayan et al., 2022b).

97 MATHEMATICS AND COMPUTING↗

Spectroscopic Determination of the Physical Conditions in Hot Optically Thin Sources

Astrophysical Plasma Emission Database - APED consists of atomic data, primarily theoretical, needed to calculate X-ray through optical emission spectra of hot thermal plasmas. These data are supplemented by experimental values, such as laboratory plasma wave- lengths, and are validated by experiment only rarely. Thus the comparison of predicted spectra to astrophysical spectra serves as invaluable feedback on the quality of the models. Following up on unfavorable comparisons, we have communicated atomic data needs to atomic theorists and experimental plasma physicists so that improvements can be made to the database. The database is now reasonably complete from approx. 1 to 30 A, and from - 90 to 180 A, with significant gaps remaining in the range 30 to 90 A. Astrophysical Plasma Emission Code - APEC uses the APED data as inputs and computes level populations and line emissivities using a rate matrix solver. Tabulated models for a fine grid of temperatures and densities can be applied to observational data. The current public version of APEC output uses an input ionization balance model, assuming CIE; however, we have a working version to calculate the ionization state of the gas. We will begin testing non-equilibrium ionization (NEI) models over the next year - we are now finalizing the atomic database needed to perform the ionization state calculations. At that time, the code will be made public. We have developed optimized error codes, additional testing protocols and substantial documentation, in preparation for this public release. Secondarily, we have begun to investigate the use of APED and APEC for X-ray photoionized plasma, beginning with opacity modeling (e.g. warm absorbers). Application to bright AGN Chandra grating spectra suggests that the accurate wavelengths in APED are of great importance to fitting the data. We are exploring additional subroutines to APEC to extend its usefulness for X-ray photoionized plasma, e.g. to include collisional or photo-excitation of metastable levels for absorption.

Oliversen, Ronald J.↗

AGNfitter: a Bayesian MCMC approach to fitting spectral energy distributions of AGNs

We present AGNfitter, a publicly available open-source algorithm implementing a fully Bayesian Markov Chain Monte Carlo method to fit the spectral energy distributions (SEDs) of active galactic nuclei (AGNs) from the sub-millimeter to the UV, allowing one to robustly disentangle the physical processes responsible for their emission. AGNfitter makes use of a large library of theoretical, empirical, and semi-empirical models to characterize both the nuclear and host galaxy emission simultaneously. The model consists of four physical emission components: an accretion disk, a torus of AGN heated dust, stellar populations, and cold dust in star-forming regions. AGNfitter determines the posterior distributions of numerous parameters that govern the physics of AGNs with a fully Bayesian treatment of errors and parameter degeneracies, allowing one to infer integrated luminosities, dust attenuation parameters, stellar masses, and star-formation rates. We tested AGNfitter’s performance on real data by fitting the SEDs of a sample of 714 X-ray selected AGNs from the XMM-COSMOS survey, spectroscopically classified as Type1 (unobscured) and Type2 (obscured) AGNs by their optical–UV emission lines. We find that two independent model parameters, namely the reddening of the accretion disk and the column density of the dusty torus, are good proxies for AGN obscuration, allowing us to develop a strategy for classifying AGNs as Type1 or Type2, based solely on an SED-fitting analysis. Our classification scheme is in excellent agreement with the spectroscopic classification, giving a completeness fraction of ∼86% and ∼70%, and an efficiency of ∼80% and ∼77%, for Type1 and Type2 AGNs, respectively.

79 ASTRONOMY AND ASTROPHYSICS↗

Top pair production in the dilepton decay channel with a tau lepton

The top quark pair production and decay into leptons with at least one being a τ lepton is studied in the framework of the CDF experiment at the Tevatron proton antiproton collider at Fermilab (USA). The selection requires an electron or a muon produced either by the τ lepton decay or by a W decay. The analysis uses the complete Run II data set i.e. 9.0 fb -1 , selected by one trigger based on a low transverse momentum electron or muon plus one isolated charged track. The top quark pair production cross section at 1.96 TeV is measured at 8.2 ± 1.7 +1.2 -1.1 ± 0.5 pb, and the top branching ratio into τ lepton is measured at 0.120 ± 0.027 +0.022 -0.019 ± 0.007 with statistical, systematics and luminosity uncertainties. These are up to date the most accurate results in this top decay channel and are in good agreement with the results obtained using other decay channels of the top at the Tevatron. The branching ratio is also measured separating the single lepton from the two leptons events with a log likelihood method. This is the first time these two signatures are separately identified. With a fit to data along the log-likelihood variable an alternative measurement of the branching ratio is made: 0.098 ± 0.022(stat:) ± 0.014(syst:); it is in good agreement with the expectations of the Standard Model (with lepton universality) within the experimental uncertainties. The branching ratio is constrained to be less than 0.159 at 95% con dence level. This limit translates into a limit of a top branching ratio into a potential charged Higgs boson.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

On the Cycling of 231 Pa and 230 Th in Benthic Nepheloid Layers

The naturally-occurring radionuclides protactinium-231 ( 231 Pa) and thorium-230 ( 230 Th) are produced at approximately uniform rates in the ocean and thought to be removed from the water column through a reversible exchange with settling particles. Recent measurements along the U.S. GEOTRACES North Atlantic transect (GA03) revealed two features which are at odds with current understanding about 231 Pa and 230 Th cycling in the ocean: (i) a sharp decrease in dissolved 231 Pa ( 231 Pa d ) and 230 Th ( 230 Th d ) activities with depth below 2000-4000 m and (ii) very high particulate 231 Pa ( 231 Pa p ) and 230 Th ( 230 Th p ) activities near the bottom, at a number of stations between the New England continental shelf and Bermuda. Concomitant measurements of light attenuation from beam transmissometry showed that both features occur in benthic nepheloid layers (BNLs), which suggests that these features may stem, at least partly, from the presence of resuspended sediment in the deep water column. Here we explore the behaviour of 231 Pa and 230 Th in BNLs by using (i) radionuclide, optical, and hydrographic data from the western segment of GA03 (west of Bermuda) and (ii) a simplified model of particle and radionuclide cycling that includes a lateral particle source. First, the BNLs observed at GA03 stations are characterized from measurements of the beam attenuation coefficient converted to particle concentrations. At all stations, particle concentrations below the clear water minimum were the highest in the bottom mixed layer, whose thickness ranged from 95 to 320 m, and decreased generally with height above the bottom. The thickness of strong BNLs varied from 482 to 1358 m and the vertical integral of particle concentration in excess to that at the clear water minimum varied from 1 x 10 4 to 2 x 10 6 mg m −2 , among different stations. Second, the particle-radionuclide model is fitted to data from stations GT11-04 (New England continental rise) and GT11-08 (Hatteras abyssal plain), where samples for radionuclide analyses were collected in the BNL. The model can reproduce simultaneously the increase of particle concentration with depth, the low 231 Pa d and 230 Th d in the BNLs, and the high 231 Pa p and 230 Th p near the bottom. According to the model, at heights less than about 300 m above the seafloor, the dissolved phase was set primarily by a balance between adsorption and desorption, with vertical turbulent mixing playing a secondary role, whilst the particulate phase behaved largely as a non-reactive constituent supplied laterally and transported vertically by particle settling and turbulent mixing. Sensitivity tests with the model suggest that lateral particle sources near continental slopes and similar reliefs can produce significant biases both in the 230 Th normalization method and in the interpretation of sediment 231 Pa/ 230 Th records. Our findings yield insights into the influence of sediment resuspension and transport on 231 Pa and 230 Th in the deep ocean and highlight the need for considering these processes in paleoceanographic applications.

Nepheloid layer↗

Investigation of an unusual low-temperature phase transformation in RbBH{sub 4} by neutron diffraction

To investigate the previously reported low-temperature phase transition in rubidium borohydride (RbBH{sub 4}) near 48.5 K, we carried out neutron powder diffraction and vibrational spectroscopy measurements both above and below this temperature on an isotopically-enriched sample of Rb{sup 11}BD{sub 4}. Our diffraction data reflected an average cubic Fm3{sup ¯}m structure with BD{sub 4}{sup −} anion orientational disorder at all temperatures, with no hint of extra Bragg peaks due to long-range orientational order below the transition temperature as reported by others. These structural results and careful analysis of torsional vibrations in RbBD{sub 4} corroborate the results of prior neutron vibrational spectroscopy measurements suggesting that the low-temperature RbBH{sub 4} structure indeed possesses some orientational ordering of the BH{sub 4}{sup −} anions, but of a shorter-ranged nature insensitive to powder diffraction methods. - The neutron powder diffraction pattern of RbBD{sub 4} below the phase transition temperature (shown here in black) is indistinguishable from that collected above the phase transition temperature. The inset depicts the cubic structure that fits the data at both temperatures. - Highlights: • We investigated the nature of the RbBD{sub 4} phase transition using NVS and NPD. • A change in shape of the RbBD{sub 4} torsion mode was observed across the transition. • The RbBD{sub 4} diffraction pattern across this phase transition was unchanged. • The phase transition in RbBD{sub 4} appears to produce only short-range ordering of BD{sub 4}{sup −}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Constrained or unconstrained? Neural-network-based equation discovery from data

Throughout many fields, practitioners often rely on differential equations to model systems. Yet, for many applications, the theoretical derivation of such equations and/or the accurate resolution of their solutions may be intractable. Instead, recently developed methods, including those based on parameter estimation, operator subset selection, and neural networks, allow for the data-driven discovery of both ordinary and partial differential equations (PDEs), on a spectrum of interpretability. The success of these strategies is often contingent upon the correct identification of representative equations from noisy observations of state variables and, as importantly and intertwined with that, the mathematical strategies utilized to enforce those equations. Specifically, the latter has been commonly addressed via unconstrained optimization strategies. Representing the PDE as a neural network, we propose to discover the PDE (or the associated operator) by solving a constrained optimization problem and using an intermediate state representation similar to a physics-informed neural network (PINN). The objective function of this constrained optimization problem promotes matching the data, while the constraints require that the discovered PDE is satisfied at a number of spatial collocation points. We present a penalty method and a widely used trust-region barrier method to solve this constrained optimization problem, and we compare these methods on numerical examples. Our results on several example problems demonstrate that the latter constrained method outperforms the penalty method, particularly for higher noise levels or fewer collocation points. This work motivates further exploration into using sophisticated constrained optimization methods in scientific machine learning, as opposed to their commonly used, penalty-method or unconstrained counterparts. For both of these methods, we solve these discovered neural network PDEs with classical methods, such as finite difference methods, as opposed to PINNs-type methods relying on automatic differentiation. Here, we briefly highlight how simultaneously fitting the data while discovering the PDE improves the robustness to noise and other small, yet crucial, implementation details.

Data-driven discovery↗

Unsteady design-point flow phenomena in transonic compressors

High-frequency response probes which had previously been used exclusively in the MIT Blowndown Facility were successfully employed in two conventional steady state axial flow compressor facilities to investigate the unsteady flowfields of highly loaded transonic compressors at design point operation. Laser anemometry measurements taken simultaneously with the high response data were also analyzed. The time averaged high response data of static and total pressure agreed quite well with the conventional steady state instrumentation except for flow angle which showed a large spread in values at all radii regardless of the type of instrumentation used. In addition, the time resolved measurements confirmed earlier test results obtained in the MIT Blowdown Facility for the same compressor. The results of these tests have further revealed that the flowfields of highly loaded transonic compressors are heavily influenced by unsteady flow phenomena. The high response measurements exhibited large variations in the blade to blade flow and in the blade passage flow. The observed unsteadiness in the blade wakes is explained in terms of the rotor blades' shed vorticity in periodic vortex streets. The wakes were modeled as two-dimensional vortex streets with finite size cores. The model fit the data quite well as it was able to reproduce the average wake shape and bi-modal probability density distributions seen in the laser anemometry data. The presence of vortex streets in the blade wakes also explains the large blade to blade fluctuations seen by the high response probes which is simply due to the intermittent sampling of the vortex street as it is swept past a stationary probe.

Gertz, J. B.↗

The Type II superluminous SN 2008es at late times: near-infrared excess and circumstellar interaction

SN 2008es is one of the rare cases of a Type II superluminous supernova (SLSN), showing no narrow features in its early-time spectra, and therefore, its powering mechanism is under debate between circumstellar interaction (CSI) and magnetar spin-down. Late-time data are required for better constraints. We present optical and near-infrared (NIR) photometry obtained from Gemini, Keck, and Palomar Observatories from 192 to 554 d after explosion. Only broad H α emission is detected in a Gemini spectrum at 288 d. The line profile exhibits red-wing attenuation relative to the early-time spectrum. In addition to the cooling SN photosphere, an NIR excess with blackbody temperature ∼1500 K and radius ∼1016 cm is observed. This evidence supports dust condensation in the cool dense shell being responsible for the spectral evolution and NIR excess. We favour CSI, with ∼2–3 Mꙩ of circumstellar material (CSM) and ∼10–20 Mꙩ of ejecta, as the powering mechanism, which still dominates at our late-time epochs. Both models of uniform density and steady wind fit the data equally well, with an effective CSM radius ∼1015 cm, supporting the efficient conversion of shock energy to radiation by CSI. A low amount (≲0.4 Mꙩ) of 56Ni is possible but cannot be verified yet, since the light curve is dominated by CSI. The magnetar spin-down powering mechanism cannot be ruled out, but is less favoured because it overpredicts the late-time fluxes and may be inconsistent with the presence of dust.

Kornpob Bhirombhakdi↗

A hydride reorientation model for irradiated zirconium alloy cladding

This paper presents a hydride reorientation model for irradiated, but de-fueled, zirconium-based alloy cladding tubes for water cooled reactors subjected to temperature and stress conditions of interest to storage of commercial spent nuclear fuel under dry, inert conditions. The present development builds upon and updates an existing hydride precipitation model developed in 2003, and was motivated by recent findings that the old model underestimated the amount of radial hydrides for applied hoop stresses below 100 MPa. The data used to support the development of the new model were obtained from an NFIR-sponsored experimental program on de-fueled cladding tubes irradiated in light-water reactors. The irradiated material consisted of three types of zirconium-based alloys sampled from high burnup fuel rods: cold-worked stress-relieved (CWSR) Zircaloy-4 (Zr-4), CWSR Zirlo{sup TM}, and recrystallized annealed (RXA) Zircaloy-2 (Zr-2). The majority of the hydride re-orientation tests for the irradiated cladding specimens were conducted under constant pressure with a mean cooling rate of about 1 Celsius degree/mn. The remaining tests were conducted at slower cooling rates with the pressure being kept proportional to the temperature change during the cooling process to simulate dry storage conditions. The parameters of the hydride re-orientation model were fitted to the test data. Fitting parameters were determined for (CWSR) Zircaloy-4 (Zr-4) and CWSR Zirlo{sup TM} respectively. The cooling rate effect was empirically accounted for in the model. General good agreement between model prediction and measured radial hydride content is achieved, with a standard error less than 12 ppm. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Chelation Modeling of a Plutonium-238 Inhalation Incident Treated with Delayed DTPA

This work describes an analysis, using a previously established chelation model, of the bioassay data collected from a worker who received delayed chelation therapy following a plutonium-238 inhalation. The details of the case have already been described in two publications. The individual was treated with Ca-DTPA via multiple intravenous injections and then nebulizations beginning several months after the intake and continuing for four years. The exact date and circumstances of the intake are unknown. However, interviews with the worker suggested that the intake occurred via inhalation of a soluble plutonium compound. The worker provided daily urine and fecal bioassay samples throughout the chelation treatment protocol, including samples collected before, during, and after the administration of Ca-DTPA. Unlike the previous two publications presenting this case, the current analysis explicitly models the combined biokinetics of the plutonium-DTPA chelate. Further, using the previously established chelation model, it was possible to fit the data through optimizing only the intake (day and magnitude), solubility, and absorbed fraction of nebulized Ca-DTPA. This work supports the hypothesis that the efficacy of the delayed chelation treatment observed in this case results mainly from chelation of cell-internalized plutonium by Ca-DTPA (intracellular chelation). It also demonstrates the validity of the previously established chelation model. As the bioassay data were modified to ensure data anonymization, the calculation of the “true” committed effective dose was not possible. However, the treatment-induced dose inhibition (in percentage) was calculated.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗

INGENIOUS - Great Basin Regional Dataset Compilation

This is the regional dataset compilation for the INnovative Geothermal Exploration through Novel Investigations Of Undiscovered Systems (INGENIOUS) project. The primary goal of this project is to accelerate discoveries of new, commercially viable hidden geothermal systems while reducing the exploration and development risks for all geothermal resources. These datasets will be used in INGENIOUS as input features for predicting geothermal favorability throughout the Great Basin study area. Datasets consist of shapefiles, geotiffs, tabular spreadsheets, and metadata that describe: 2-meter temperature probe surveys, quaternary faults and volcanic features, geodetic shear and dilation models, heat flow, magnetotellurics (conductance), magnetics, gravity, paleogeothermal features (such as sinter and tufa deposits), seismicity, spring and well temperatures, spring and well aqueous geochemistry analyses, thermal conductivity, and fault slip and dilation tendency. For additional project information, see the INGENIOUS project site linked in the submission. Terms of use: These datasets are provided "as is", and the contributors assume no responsibility for any errors or omissions. The user assumes the entire risk associated with their use of these data and bears all responsibility in determining whether these data are fit for their intended use. These datasets may be redistributed with attribution (see citation information below). Please refer to the license information on this page for full licensing terms and conditions.

15 GEOTHERMAL ENERGY↗

Oxygen Defect Configurations in Single-Phase UO 2.15

Hyperstoichiometric UO 2.15 was characterized by neutron total scattering at high temperature in the single-phase UO 2+x region of the U/O phase diagram. The diffraction data confirmed a single-phase fluorite structure at high temperature. Analysis of the short-range data showed that the same structural model does not fit the pair distribution functions well. Instead, structural models containing specific configurations of oxygen defect clusters best represent the local atomic arrangement. In conclusion, prevalent defect clusters previously proposed were fit to the experimental data, and moderately distorted oxygen cuboctahedra hypothesized by recent molecular dynamics simulations fit the data most accurately.

neutron pair-distribution function analysis↗

Incidence of Changes in Respiration-Induced Tumor Motion and Its Relationship With Respiratory Surrogates During Individual Treatment Fractions

Purpose: To determine how frequently (1) tumor motion and (2) the spatial relationship between tumor and respiratory surrogate markers change during a treatment fraction in lung and pancreas cancer patients. Methods and Materials: A Cyberknife Synchrony system radiographically localized the tumor and simultaneously tracked three respiratory surrogate markers fixed to a form-fitting vest. Data in 55 lung and 29 pancreas fractions were divided into successive 10-min blocks. Mean tumor positions and tumor position distributions were compared across 10-min blocks of data. Treatment margins were calculated from both 10 and 30 min of data. Partial least squares (PLS) regression models of tumor positions as a function of external surrogate marker positions were created from the first 10 min of data in each fraction; the incidence of significant PLS model degradation was used to assess changes in the spatial relationship between tumors and surrogate markers. Results: The absolute change in mean tumor position from first to third 10-min blocks was >5 mm in 13% and 7% of lung and pancreas cases, respectively. Superior-inferior and medial-lateral differences in mean tumor position were significantly associated with the lobe of lung. In 61% and 54% of lung and pancreas fractions, respectively, margins calculated from 30 min of data were larger than margins calculated from 10 min of data. The change in treatment margin magnitude for superior-inferior motion was >1 mm in 42% of lung and 45% of pancreas fractions. Significantly increasing tumor position prediction model error (mean {+-} standard deviation rates of change of 1.6 {+-} 2.5 mm per 10 min) over 30 min indicated tumor-surrogate relationship changes in 63% of fractions. Conclusions: Both tumor motion and the relationship between tumor and respiratory surrogate displacements change in most treatment fractions for patient in-room time of 30 min.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

High-pressure crystallography and compression behavior of the alkali-scandium-germanate end-members LiScGe{sub 2}O{sub 6} and NaScGe{sub 2}O{sub 6}

Synthetic single-crystal samples of the monoclinic pyroxene-type compounds LiScGe{sub 2}O{sub 6} and NaScGe{sub 2}O{sub 6} have been investigated by means of in-situ high-pressure Raman spectroscopy and X-ray diffraction techniques. Crystal-structure investigations at hydrostatic high-pressure conditions were carried out in addition to 10{sup −4} GPa measurements using the diamond-anvil cell technique up to ∼9.5 GPa. Both samples, LiScGe{sub 2}O{sub 6} (space group P2{sub 1}/c, a=9.9999(8) Å, b=9.1040(2) Å, c=5.4610(2) Å, β=109.240(2)° at 10{sup −4} GPa) and NaScGe{sub 2}O{sub 6} (space group C2/c, a=10.1678(5) Å, b=9.1583(5) Å, c=5.5672(3) Å, β=107.257(3)° at 10{sup −4} GPa), did not undergo any compression-induced change of symmetry as confirmed by single-crystal diffraction patterns. Series of high-pressure Raman spectra confirm the absence of any symmetry-related structural phase transition with band positions shifting in a smooth fashion on increasing pressure. High-precision lattice parameters, as determined from X-ray diffraction profile analyzes, were used to monitor both the compressibilities of lattice directions and the evolution of the unit-cell volume with pressure. The experimental data was fitted using a third-order Birch–Murnaghan equation-of-state approach and parameterized fits yield V{sub 0}=469.60(11) Å{sup 3}, K{sub 0}=85.6(1.3) GPa and K′=5.9(4) for LiScGe{sub 2}O{sub 6} and V{sub 0}=495.95(19) Å{sup 3}, K{sub 0}=79(3) GPa and K′=3.9(1.1) for NaScGe{sub 2}O{sub 6}. The systematic comparison of volume properties and compression behavior shows that both pyroxene-type compounds follow established trend lines with similar slopes in comparing volumes versus bulk moduli, and confirm that the position of trend lines in this systematics describing variations with M1 critically depend on the type of M2 and T cations, independent on the space-group symmetry. - Graphical abstract: Polyhedral model of the LiScGe{sub 2}O{sub 6} crystal structure at 9.51 GPa. Red and blue: crystallographic distinctive germanium-tetrahedral chains; Green: scandium-octahedral chains; Purple: lithium atoms. - Highlights: • High-quality high-pressure data of previously uninvestigated germanate compounds. • Results confirmed through complementing sXRD with Raman spectroscopy. • Comparison and relation of high-pressure pyroxene-type compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An Indication of Anisotropy in Arrival Directions of Ultra-high-energy Cosmic Rays through Comparison to the Flux Pattern of Extragalactic Gamma-Ray Sources

A new analysis of the dataset from the Pierre Auger Observatory provides evidence for anisotropy in the arrival directions of ultra-high-energy cosmic rays on an intermediate angular scale, which is indicative of excess arrivals from strong, nearby sources. The data consist of 5514 events above 20 EeV with zenith angles up to 80 deg recorded before 2017 April 30. Sky models have been created for two distinct populations of extragalactic gamma-ray emitters: active galactic nuclei from the second catalog of hard Fermi-LAT sources (2FHL) and starburst galaxies from a sample that was examined with Fermi-LAT. Flux-limited samples, which include all types of galaxies from the Swift-BAT and 2MASS surveys, have been investigated for comparison. The sky model of cosmic-ray density constructed using each catalog has two free parameters, the fraction of events correlating with astrophysical objects and an angular scale characterizing the clustering of cosmic rays around extragalactic sources. A maximum-likelihood ratio test is used to evaluate the best values of these parameters and to quantify the strength of each model by contrast with isotropy. It is found that the starburst model fits the data better than the hypothesis of isotropy with a statistical significance of 4.0 sigma, the highest value of the test statistic being for energies above 39 EeV. The three alternative models are favored against isotropy with 2.7-3.2 sigma significance. The origin of the indicated deviation from isotropy is examined and prospects for more sensitive future studies are discussed.

79 ASTRONOMY AND ASTROPHYSICS↗