Search NASA⌕ Search

SEARCH · Search NASA

Results for “Decoder”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

The payload/shuttle-data-communication-link handbook

Communication links between the Orbiter, payloads, and ground are described: end-to-end, hardline, S-band, Ku-band, TDRSS relay, waveforms, premodulation, subcarrier modulation, carrier modulation, transmitter power, antennas, the RF channel, system noise, received signal-to-noise spectral density, carrier-tracking loop, carrier demodulation, subcarrier demodulation, digital data detection, digital data decoding, and tandem link considerations.

Source record↗

Telemetry system

The means of telemetering digital data from a spacecraft to the Deep Space Network is addressed. Phase shift keying and uncoded quadriphase shift keying modulations are discussed along with demodulation and decoding systems. Telemetry system losses and noisy reference performance for suppressed carrier receivers are also examined.

Yuen, J. H.↗

Thematic mapper flight model preshipment review data package. Volume 4: Appendix. Part E: Electronics module data

Tests to verify the as-designed performance of all circuits within the thematic mapper electronics module unit are described. Specifically, the tests involved the evaluation of the scan line corrector driver, shutter drivers function, cal lamp controller function, post amplifier function, command decoder verification unit, and the temperature and actuator controllers function.

Source record↗

Four-dimensional modulation and coding: An alternate to frequency-reuse

Four dimensional modulation as a means of improving communication efficiency on the band-limited Gaussian channel, with the four dimensions of signal space constituted by phase orthogonal carriers (cos omega sub c t and sin omega sub c t) simultaneously on space orthogonal electromagnetic waves are discussed. "Frequency reuse' techniques use such polarization orthogonality to reuse the same frequency slot, but the modulation is not treated as four dimensional, rather a product of two-d modulations, e.g., QPSK. It is well known that, higher dimensionality signalling affords possible improvements in the power bandwidth sense. Four-D modulations based upon subsets of lattice-packings in four-D, which afford simplification of encoding and decoding are described. Sets of up to 1024 signals are constructed in four-D, providing a (Nyquist) spectral efficiency of up to 10 bps/Hz. Energy gains over the reuse technique are in the one to three dB range t equal bandwidth.

Wilson, S. G.↗

Mitigation of pulsed RFI via automatic gain control

Three automatic gain control (AGC) strategies and their potential capabilities for mitigation of pulsed radio frequency interference (RFI) over a coded, nonlinear channel are examined. The first updates the AGC control voltage once each symbol interval in accordance with a prespecified criterion. The second implementation is designed to first detect high level RFI and then appropriately update its gain. The final implementation is a wideband device which updates its gain once each symbol interval by reducing the gain in direct proportion to a suitable power measurement. Computed results treat pulsed noise and pulsed CW RFI and compare performances in terms of bit error rate (BER) at the output of a Viterbi decoder.

Chang, R. W.-S.↗

X-ray imaging of extended objects using nonoverlapping redundant array

A common problem associated with X-ray imaging using coded apertures is the reconstruction of low-intensity extended objects. In the decoding of such objects, the overlapping images from the multiple pinholes give rise to noise cross talk and, in many cases, also to signal cross talk. In this paper, an alternate approach is proposed based on the principle used in an earlier (Yin et al., 1980) laboratory device for the real-time viewing of X-ray objects. It is shown that with this approach, the nonoverlapping redundant array, the sidelobes in the point spread function are not eliminated but merely displaced through a suitable choice of geometry. In this manner, the sidelobes no longer contribute to the background in the vicinity of a reconstructed image, and both signal and noise cross talks are completely eliminated. It may now be possible to reconstruct extended X-ray objects in 3-D by simple optical correlation and tomographically by a computer.

Yin, L.-I.↗

Onboard processing for a 30/20 GHz communications satellite

A systems configuration for the baseband processor for a TDMA communications satellite utilizing the 30 GHz uplink and 20 GHz downlink bands will be discussed. The baseband processor functions include QPSK burst demodulation, convolutional decoding, data routing, encoding, QPSK modulation, and antenna steering. The performance of the burst demodulator will be examined. Power and weight estimates for the baseband processor will be presented.

Reisenfeld, S.↗

Rate 3/4 16-PSK phase codes

An investigation is carried out of convolutional-coding coupled with 16-PSK modulation for bandwidth efficient transmission. Small memory codes (rate three-fourths) are found that are optimum in the free-distance sense on the Gaussian channel. These codes furnish up to 4.8 dB of coding gain with 32 states over uncoded 8-PSK, a scheme having the same spectral efficiency as the codes described. The performance is compared with the earlier findings of Ungerboeck (1976, 1982) and certain recent results on R = 2/3 coded 8-PSK. It is shown that with 4 decoder states the coding gain is 3.5 dB and with 32 states it is 4.8 dB. What is more, the codes compare favorably with coded 16-QASK when envelope variations and peak energy constraints are considered.

Wilson, S. G.↗

Test Sequences for Reed-Solomon Encoders

Theory of Reed-Solomon codes yields sequences of input test symbols. Two specific sequences worked out for codes of 8 bits per symbol with 223 information symbols and 32 parity check symbols per code words. Test patterns also used for decoders.

Lee, J. J.↗

Permanence analysis of a concatenated coding scheme for error control

A concatenated coding scheme for error control in data communications is analyzed. In this scheme, the inner code is used for both error correction and detection, however, the outer code is used only for error detection. A retransmission is requested if the outer code detects the presence of errors after the inner code decoding. Probability of undetected error is derived and bounded. A particular example, proposed for the planetary program, is analyzed.

Costello, D. J., Jr.↗

Transfer Function Bounds for Partial-unit-memory Convolutional Codes Based on Reduced State Diagram

The performance of a coding system consisting of a convolutional encoder and a Viterbi decoder is analytically found by the well-known transfer function bounding technique. For the partial-unit-memory byte-oriented convolutional encoder with m sub 0 binary memory cells and (k sub 0 m sub 0) inputs, a state diagram of 2(K) (sub 0) was for the transfer function bound. A reduced state diagram of (2 (m sub 0) +1) is used for easy evaluation of transfer function bounds for partial-unit-memory codes.

Lee, P. J.↗

An extended d(min) = 4 RS code

A minimum distance d sub m - 4 extended Reed - Solomon (RS) code over GF (2 to the b power) was constructed. This code is used to correct any single byte error and simultaneously detect any double byte error. Features of the code; including fast encoding and decoding, are presented.

Deng, H.↗

Design considerations for high-power VHF radar transceivers (keynote paper)

A review and analysis of conference papers addressing the design of high power VHF radar tranceivers is presented. Specific design topics include: (1) distributed versus single transmitters; (2) coded pulses and decoder design; (3) large transmitter design considerations; and (4) T/R switch design. The topics in the discussion on future directions include the following: (1) enhanced receiver performance; (2) transmitter systems for unattended operation; (3) limitations of the current T/R switch designs; (4) data processing (is eight bits enough); and (5) new frequencies (200 MHz and/or 400 MHz).

Brosnahan, J. W.↗

BCH codes for large IC random-access memory systems

In this report some shortened BCH codes for possible applications to large IC random-access memory systems are presented. These codes are given by their parity-check matrices. Encoding and decoding of these codes are discussed.

Lin, S.↗

Autonomous Integrated Receive System (AIRS) requirements definition. Volume 1: Executive summary

Distributed processing in the design and operation of the augmented TDRSS and the succeeding TDAS in the 1990's is discussed with the emphasis on the development of the autonomous integrated receive system (AIRS) for the operation of the S-band single access (SSA) return link in the White Sands ground terminal. This receive system has the capability of self configuration, real-time operation, and self diagnostic. The tasks of Doppler correction, demodulation, detection, and decoding are performed in an integrated manner where useful information are shared and used by ALL portions of AIRS performing these tasks. Operating modes, maintenance, system architecture, and performance characteristics are described.

Chie, C. M.↗

Baseband processor development for the Advanced Communications Satellite Program

An onboard-baseband-processor concept for a satellite-switched time-division-multiple-access (SS-TDMA) communication system was developed for NASA Lewis Research Center. The baseband processor routes and controls traffic on an individual message basis while providing significant advantages in improved link margins and system flexibility. Key technology developments required to prove the flight readiness of the baseband-processor design are being verified in a baseband-processor proof-of-concept model. These technology developments include serial MSK modems, Clos-type baseband routing switch, a single-chip CMOS maximum-likelihood convolutional decoder, and custom LSL implementation of high-speed, low-power ECL building blocks.

Moat, D.↗

Telephone Instrument for the Deaf

Telephone-communication scheme for deaf uses existing tone-encoded telephone equipment to transmit messages. Only special equipment required is decoder at receiving telephone.

Brown, W. H.↗

Encoding Scheme Reduces Hardware Requirements

Shift register time-shared in proposed error-correcting code for tape-storage systems. Error-correcting code logic for blocks of 256-bit data words implemented by 14-stage-time-shared shift register, two 4,096bit RAM's and logic gates. Encoding and decoding logic implement generator polynomial that defines error-correcting code, and error correction based on algorithm also implemented by logic.

Sasnowitz, H.↗