Search NASA⌕ Search

SEARCH · Search NASA

Results for “Describing function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Dielectric Properties of Nanocrystalline Tungsten Oxide in the Temperature Range of 223–293 K

The dielectric properties of nanocrystalline tungsten oxide are studied in the temperature range of 223–293 K and in the frequency range ν = 10{sup –2}–10{sup 6} Hz. Powders of WO{sub 3} with particle sizes of 110, 150, and 200 nm are prepared by the heat treatment of ammonium paratungstate at various temperatures. It is established that the frequency dependences of the conductivity for all samples increase with an increase in frequency, while the polarization characteristics ε'(ν) and ε'(ν) decrease. It is found that the frequency dependences of the conductivity are described by a function of the form ν{sup s} with an index in the range of (0.83–0.90) ± 0.01, which is characteristic of the “hopping” mechanism of charged-particle motion (complexes) over localized states confined by potential barriers and structural defects.

36 MATERIALS SCIENCE↗
DOE OSTI2019

On the Two-Phonon Relaxation of Excited States of Boron Acceptors in Diamond

The relaxation of holes from excited states of boron acceptors in diamond with the emission of two optical phonons is studied theoretically. To describe the wave function of acceptor states, an electron-like Hamiltonian with an isotropic effective mass is used. The wave function of the ground state is determined by the quantum-defect method. The probability of the transition is calculated in the adiabatic approximation. It is assumed that the phonon dispersion law is isotropic and the phonon frequency is quadratically dependent on the wave-vector modulus, with the maximum and minimum frequencies ω{sub max} and ω{sub min} at the center and boundary of the Brillouin zone, respectively. A high sensitivity of the probability of the transition to the characteristic of phonon dispersion ω{sub max} – ω{sub min} is revealed, especially for the transition with the energy E{sub T} in the range 2ℏω{sub min} ≤ E{sub T} < ℏω{sub min} + ℏω{sub max}. Depending on the energy of the transition and on the phonon dispersion, the two-phonon relaxation rate at the low-temperature limit varies from extremely small values (<10{sup 8} s{sup –1}) near the threshold E{sub T} = 2ℏω{sub min} to extremely large values (>10{sup 12} s{sup –1}) in the “resonance” range ℏω{sub min} + ℏω{sub max} ≤ E{sub T} ≤ 2ℏω{sub max}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Analytic solutions of the DGLAP evolution and theoretical uncertainties

The energy dependence for the singlet sector of Parton Distributions Functions (PDFs) is described by an entangled pair of ordinary linear differential equations. Although there are no exact analytic solutions, it is possible to provide approximated results depending on the assumptions and the methodology adopted. These results differ in their sub-leading, neglected terms and ultimately they are associated with different treatments of the theoretical uncertainties. In this work, a novel analytic approach in Mellin space is presented and a new methodology for obtaining closed and exponentiated analytic solutions is devised. Different results for the DGLAP evolution at Next-Leading-Order are compared, discussing advantages and disadvantages for each solution. The generalizations to higher orders are addressed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Transverse moments of TMD parton densities and ultraviolet divergences

In this report I review some open questions relating to the large transverse momentum divergences in transverse moments of transverse momentum dependent (TMD) parton correlation functions. I also explain, in an abbreviated and summarized form, recent work that shows that the resulting violations of a commonly used integral relation are not perturbatively suppressed. I argue that this implies a need for more precise definitions for the correlation functions used to describe transverse moments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Fast and versatile sequence-independent protein docking for nanomaterials design using RPXDock

Computationally designed multi-subunit assemblies have shown considerable promise for a variety of applications, including a new generation of potent vaccines. One of the major routes to such materials is rigid body sequence-independent docking of cyclic oligomers into architectures with point group or lattice symmetries. Current methods for docking and designing such assemblies are tailored to specific classes of symmetry and are difficult to modify for novel applications. Here we describe RPXDock, a fast, flexible, and modular software package for sequence-independent rigid-body protein docking across a wide range of symmetric architectures that is easily customizable for further development. RPXDock uses an efficient hierarchical search and a residue-pair transform ( RPX ) scoring method to rapidly search through multidimensional docking space. We describe the structure of the software, provide practical guidelines for its use, and describe the available functionalities including a variety of score functions and filtering tools that can be used to guide and refine docking results towards desired configurations.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2018

Proton spin structure from Monte Carlo global QCD analyses

Although significant progress has been made in recent years in understanding the composition of the proton's spin from its quark and gluon constituents, a complete picture has yet to emerge. Such information is encoded in spin-dependent parton distribution functions (PDFs) that, as a consequence of being inherently nonperturbative, must be extracted through global QCD analyses of polarized lepton-nucleon and proton-proton collisions. Experiments that measure a final state hadron from these reactions are particularly useful for separating the individual quark and anti-quark polarizations, but require knowledge of parton-to-hadron fragmentation functions (FFs) to describe theoretically. In this thesis, we present a new approach to global QCD analyses, that were performed recently by the Jefferson Lab Angular Momentum (JAM) Collaboration to determine the spin PDFs and FFs from deep inelastic scattering (DIS), semi-inclusive DIS, and single inclusive electron-positron annihilation observables. While previous global QCD studies typically used a single !2 minimization procedure, the JAM Collaboration applies a robust Monte Carlo fitting methodology to extract the central values and uncertainties of the relevant distributions. The results from these JAM global QCD analyses, which include a first ever simultaneous fit of the spin PDFs and FFs, resolve a long-standing puzzle regarding the strange quark polarization and provide new information about the proton spin structure.

Source record↗
DOE OSTI2020

Development and Evaluation of Distributed Energy Resource Device Models: Electric Vehicles, Electric Water Heaters, and Commercial Refrigeration Systems

In order to validate distributed energy resource (DER) models operated with grid services in the GMLC 1.4.2 team’s February (GMLC 2019a) and July (GMLC 2019b) reports, a test and measurement program using actual DER devices was conducted by national laboratories for three devices: (1) electric vehicles (EVs), (2) water heaters, and (3) commercial refrigeration. Test procedures were developed and carried out to identify the mathematical models and their parameters that describe the operational function, characterize the physics, and obey transient response of the devices. This report focuses on the experimental results obtained to develop and verify simulations of three specific EV models. This section summarizes elements of the mathematical model and shows the necessity data collected from the EVs while charging and discharging (driving). In the course of the study, we found it necessary to make some modifications to the model to deal with observed transient behavior. Section 1.2 details the model assumptions and equations, Section 1.3 provides details of the EVs tested, Section 1.4 outlines the test procedures developed for the projects, and Section 1.5 presents the experimental results obtained for the three different EVs tested and how these results compare to the models running the same test profiles.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2017

Performance Specification 01000S, Building XXX Institutional General Plant Project

Design and construct a high-bay facility with penthouse mechanical area that meets the physical and functional requirements as described in this document. Using the Modular High Bay Programming Plan, contractor shall validate programming requirements including equipment to be installed; room sizes and quantities; heating, ventilation, and air- conditioning (HVAC) and electrical requirements, including sizing of equipment based on heat load; and other specific needs. Contractor shall provide the design development, engineering, construction drawings, construction and construction administration services required to completely define, document, and construct the facility to the requirements described in the Building XXX Programming Plan and those referenced herein.

42 ENGINEERING↗
DOE OSTI2022

Experience of Migrating a Parallel Graph Coloring Program from CUDA to SYCL

We describe the experience of converting a CUDA implementation of a parallel graph coloring algorithm to SYCL. The goals are for our work to be useful to application and compiler developers by providing a detailed description of migration paths between CUDA and SYCL. We will describe how CUDA functions are mapped to SYCL functions. Evaluating the CUDA and SYCL implementations of the algorithm shows that the performance of SYCL and CUDA kernels are comparable over the test graph set on NVIDIA P100 and V100 GPUs. The SYCL program also allows for performance evaluation with the OpenCL and Level Zero interfaces and power profiling on an Intel GPU computing platform.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

3013 Surveillance Program Interim Summary Report (FY16-FY21)

The K-Area Documented Safety Analysis (DSA) requires the facility participate in the SRS Site Surveillance Program as a part of Shipping Package Qualification and Storage Surveillance Program. The Site Surveillance Program outlines activities for field surveillance and laboratory tests that demonstrate the 3013 containers meet the functional performance requirements described in the DSA. The SRS Surveillance Program also supports the complex-wide Integrated Surveillance Program (ISP) for 3013 containers in accordance with DOESTD-3013. The purpose of this report is to provide a summary of the SRS portion of the surveillance program activities from FY16 through FY21 and formally communicate the interpretation of these results by the Surveillance Program Authority (SPA).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Advanced Closures for Nonlinear Fluid Simulations of Plasmas (Final Report)

Advanced Closures for Nonlinear Fluid Simulations of Plasmas E. Held, Utah State University (Principal Investigator) J.-Y. Ji, Utah State University (Co-Investigator) Utah State University (USU) continued to develop and apply closures for hybrid fluid/kinetic simulations of magnetized fusion plasmas. The closures developed by USU's fusion theory and computation group use the drift ordering and are referred to as "continuum" and "general moment" approaches. They differ in their representation for the distribution functions which probabilistically describe the density of particles in 5 dimensional phase space. The two chosen velocity variables, needed in studies of kinetic physics for magnetized plasmas, are the speed and the component of a particle's velocity along the magnetic field. In magnetized plasmas, the charged particle trajectories are tied closely to the magnetic field lines. Both approaches account for binary interactions between particles using the Coulomb collision operator. Theoretical and computational development along both lines provided avenues for verification between the two approaches. This funding allowed USU to further develop physically accurate and numerically efficient models that advance our understanding of kinetic physics in experiments like the International Thermonuclear Experimental Reactor (ITER). The ITER device will likely prove the physical practicality of thermonuclear fusion by producing 500 megawatts of clean, abundant fusion power. This work helped to realize this goal by advancing our simulation capability using hybrid fluid/kinetic models.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

The Bacteroidetes Aequorivita sp. and Kaistella jeonii Produce Promiscuous Esterases With PET-Hydrolyzing Activity

Certain members of the Actinobacteria and Proteobacteria are known to degrade polyethylene terephthalate (PET). Here, we describe the first functional PET-active enzymes from the Bacteroidetes phylum. Using a PETase-specific Hidden-Markov-Model- (HMM-) based search algorithm, we identified several PETase candidates from Flavobacteriaceae and Porphyromonadaceae. Among them, two promiscuous and cold-active esterases derived from Aequorivita sp. (PET27) and Kaistella jeonii (PET30) showed depolymerizing activity on polycaprolactone (PCL), amorphous PET foil and on the polyester polyurethane Impranil ® DLN. PET27 is a 37.8 kDa enzyme that released an average of 174.4 nmol terephthalic acid (TPA) after 120 h at 30°C from a 7 mg PET foil platelet in a 200 μl reaction volume, 38-times more than PET30 (37.4 kDa) released under the same conditions. The crystal structure of PET30 without its C-terminal Por-domain (PET30ΔPorC) was solved at 2.1 Å and displays high structural similarity to the Is PETase. PET30 shows a Phe-Met-Tyr substrate binding motif, which seems to be a unique feature, as Is PETase, LCC and PET2 all contain Tyr-Met-Trp binding residues, while PET27 possesses a Phe-Met-Trp motif that is identical to Cut190. Microscopic analyses showed that K. jeonii cells are indeed able to bind on and colonize PET surfaces after a few days of incubation. Homologs of PET27 and PET30 were detected in metagenomes, predominantly aquatic habitats, encompassing a wide range of different global climate zones and suggesting a hitherto unknown influence of this bacterial phylum on man-made polymer degradation.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2018

A New Calmodulin-Binding Protein Expresses in the Context of Secondary Cell Wall Biosynthesis and Impacts Biomass Properties in Populus

Here, a greater understanding of biosynthesis, signaling and regulatory pathways involved in determining stem growth and secondary cell wall chemistry is important for enabling pathway engineering and genetic optimization of biomass properties. The present study describes a new functional role of PdIQD10 , a Populus gene belonging to the IQ67-Domain1 family of IQD genes, in impacting biomass formation and chemistry. Expression studies showed that PdIQD10 has enhanced expression in developing xylem and tension-stressed tissues in Populus deltoides . Molecular dynamics simulation and yeast two-hybrid interaction experiments suggest interactions with two calmodulin proteins, CaM247 and CaM014, supporting the sequence-predicted functional role of the PdIQD10 as a calmodulin-binding protein. PdIQD10 was found to interact with specific Populus isoforms of the Kinesin Light Chain protein family, shown previously to function as microtubule-guided, cargo binding and delivery proteins in Arabidopsis . Subcellular localization studies showed that PdIQD10 localizes in the nucleus and plasma membrane regions. Promoter-binding assays suggest that a known master transcriptional regulator of secondary cell wall biosynthesis (PdWND1B) may be upstream of an HD-ZIP III gene that is in turn upstream of PdIQD10 gene in the transcriptional network. RNAi-mediated downregulation of PdIQD10 expression resulted in plants with altered biomass properties including higher cellulose, wall glucose content and greater biomass quantity. Furthermore, these results present evidence in support of a new functional role for an IQD gene family member, PdIQD10 , in secondary cell wall biosynthesis and biomass formation in Populus.

09 BIOMASS FUELS↗
DOE OSTI2023

The Evolution and Mass Dependence of Galaxy Cluster Pressure Profiles at 0.05 ≤ z ≤ 0.60 and 4 × 10 14 M ⊙ ≤ M 500 ≤ 30 × 10 14 M ⊙

Abstract We have combined X-ray observations from Chandra with Sunyaev–Zel’dovich effect data from Planck and Bolocam to measure intracluster medium pressure profiles from 0.03 R 500 ≤ R ≤ 5 R 500 for a sample of 21 low- z galaxy clusters with a median redshift of 〈 z 〉 = 0.08 and a median mass of 〈 M 500 〉 = 6.1 × 10 14 M ⊙ and a sample of 19 mid- z galaxy clusters with 〈 z 〉 = 0.50 and 〈 M 500 〉 = 10.6 × 10 14 M ⊙ . The mean scaled pressure in the low- z sample is lower at small radii and higher at large radii, a trend that is accurately reproduced in similarly selected samples from The Three Hundred simulations. This difference appears to be primarily due to dynamical state at small radii, evolution at intermediate radii, and a combination of evolution and mass dependence at large radii. Furthermore, the overall flattening of the mean scaled pressure profile in the low- z sample compared to the mid- z sample is consistent with expectations due to differences in the mass accretion rate and the fractional impact of feedback mechanisms. In agreement with previous studies, the fractional scatter about the mean scaled pressure profile reaches a minimum of ≃20% near 0.5 R 500 . This scatter is consistent between the low- z and mid- z samples at all radii, suggesting it is not strongly impacted by sample selection, and this general behavior is reproduced in The Three Hundred simulations. Finally, analytic functions that approximately describe the mass and redshift trends in mean pressure profile shape are provided.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Galactic Bar Resonances with Diffusion: An Analytic Model with Implications for Bar–Dark Matter Halo Dynamical Friction

Abstract The secular evolution of disk galaxies is largely driven by resonances between the orbits of “particles” (stars or dark matter) and the rotation of non-axisymmetric features (spiral arms or a bar). Such resonances may also explain kinematic and photometric features observed in the Milky Way and external galaxies. In simplified cases, these resonant interactions are well understood: for instance, the dynamics of a test particle trapped near a resonance of a steadily rotating bar is easily analyzed using the angle-action tools pioneered by Binney, Monari, and others. However, such treatments do not address the stochasticity and messiness inherent to real galaxies—effects that have, with few exceptions, been previously explored only with complex N -body simulations. In this paper, we propose a simple kinetic equation describing the distribution function of particles near an orbital resonance with a rigidly rotating bar, allowing for diffusion of the particles’ slow actions. We solve this equation for various values of the dimensionless diffusion strength Δ, and then apply our theory to the calculation of bar–halo dynamical friction. For Δ = 0, we recover the classic result of Tremaine and Weinberg that friction ultimately vanishes, owing to the phase mixing of resonant orbits. However, for Δ > 0, we find that diffusion suppresses phase mixing, leading to a finite torque. Our results suggest that stochasticity—be it physical or numerical—tends to increase bar–halo friction, and that bars in cosmological simulations might experience significant artificial slowdown, even if the numerical two-body relaxation time is much longer than a Hubble time.

79 ASTRONOMY AND ASTROPHYSICS↗