Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dynamic parameter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Application of Koopman operator for model-based control of fracture propagation and proppant transport in hydraulic fracturing operation

This work explores the application of the recently developed Koopman operator approach for model identification and feedback control of a hydraulic fracturing process. Controlling fracture propagation and proppant transport with precision is a challenge due in large part to the difficulty of constructing approximate models that accurately capture the characteristic moving boundary and highly-coupled dynamics exhibited by the process. Koopman operator theory is particularly attractive here as it offers a way to explicitly construct linear representations for even highly nonlinear dynamics. The method is data-driven and relies on lifting the states to an infinite-dimensional space of functions called observables where the dynamics are governed by a linear Koopman operator. Here this work considers two problems: (a) fracture geometry control, and (b) proppant concentration control. In both cases, an approximate linear model of the corresponding dynamics is constructed and used to design a model predictive controller (MPC). The manuscript shows that in the case of highly nonlinear dynamics, as observed in the proppant concentration, use of canonical functions in the observable basis fails. In such cases, a priori system knowledge can be leveraged to choose the required basis. The numerical experiments demonstrate that the Koopman linear model shows excellent agreement with the real system and successfully achieves the desired target values maximizing the oil and gas productivity. Additionally, due to its linear structure, the Koopman models allow convex MPC formulations that avoid any issues associated with nonlinear optimization.

42 ENGINEERING↗

A persistent adjoint method with dynamic time-scaling and an application to mass action kinetics

In this article, we consider an optimization problem where the objective function is evaluated at the fixed-point of a contraction mapping parameterized by a control variable, and optimization takes place over this control variable. Since the derivative of the fixed-point with respect to the parameter can usually not be evaluated exactly, an adjoint dynamical system can be used to estimate gradients. Using this estimation procedure, the optimization algorithm alternates between derivative estimation and an approximate gradient descent step. We analyze a variant of this approach involving dynamic time-scaling, where after each parameter update the adjoint system is iterated until a convergence threshold is passed. Here, we prove that, under certain conditions, the algorithm can find approximate stationary points of the objective function. We demonstrate the approach in the settings of an inverse problem in chemical kinetics, and learning in attractor networks.

97 MATHEMATICS AND COMPUTING↗

Barless flocculent galaxies: a dynamic puzzle

We draw attention to the bright galaxies that do not show a bar in their structure but have a flocculent spiral structure. Using the THINGS and HERACLES kinematic data for four barless galaxies (NGC 2841, NGC 3512, NGC 5055, NGC 7331), we built their mass models including dark haloes. We concluded that the fraction of the dark matter does not exceed 50 per cent within the optical radii of the galaxies. This is too little to explain the lack of a bar in these galaxies. In an attempt to understand the featureless structure of these galaxies, we constructed several N-body models with an initially reduced content of dark matter. We concluded that, in addition to the low mass of the dark halo, the decisive factor that leads to a barless disc is the start from an initially unstable state. An isolated dynamically cold disc (with the Toomre parameter Q < 0.5) settled into rotational equilibrium passes through the short stage of violent instability with fragmentation and formation of stellar clumps. After that, it evolves passively and ends up with a featureless structure. We assume that the barless flocculent galaxies studied in this work may be descendants of galaxies at high redshifts with rotation curves that are consistent with the high mass fraction of baryons relative to the total dark matter halo.

79 ASTRONOMY AND ASTROPHYSICS↗

Parameter extraction approaches for compact modeling of thermoelectric modules

Thermoelectric (TE) cooling has experienced rapid advancements with the foundational understanding of TE materials. TE modules, compact and lightweight devices, have become the prevalent approach for implementing TE technologies. Accurately quantifying TE physical parameters (Seebeck coefficient α, thermal conductivity κ, and thermal resistance ρ) is challenging due to the dynamic temperature changes in operation. Furthermore, extracting lumped property parameters is crucial for designing energy systems using TE modules. Existing research has several limitations, such as lack of comparative analysis between prevalent formulae, reliance on potentially inaccurate vendor-supplied data, disregard for fundamental assumptions, and absence of empirical measurements. Further, this study addresses these gaps by conducting TE material characterization, comparing three existing formulae using vendor datasheets, designing a laboratory test facility for model validation and refinement, and outlining a structured data extraction procedure. The study's novelty lies in multiple key contributions: (1) a detailed comparative analysis of existing formulae for extracting TE property parameter; (2) executing experimental work in a laboratory setting to validate the model and elucidate its limitations; (3) highlighting potential risks; (4) clarifying possible assumptions from both material and engineering perspectives; and (5) considering temperature differential impacts. This comprehensive approach addresses the current research gaps and provides valuable insights into the design and application of TE modules in various energy systems.

36 MATERIALS SCIENCE↗

Design and dynamic modeling of printed circuit heat exchangers for supercritical carbon dioxide Brayton power cycles

Due to the unique geometries and hydraulics of printed circuit heat exchangers and rapidly changing properties of supercritical carbon dioxide, the effective design and rating of printed circuit heat exchangers is an essential requirement for their use in supercritical carbon dioxide power cycles. In this study, one-dimensional design and dynamic models have been developed in Aspen Custom Modeler for printed circuit heat exchangers utilized in printed circuit heat exchangers Brayton power cycles. The design model is used to determine the optimal geometry parameters by minimizing the metal mass. The dynamic model is used to predict transient behavior and can be easily implemented into system-level models developed in Aspen Plus Dynamics for cycle performance evaluations. In these models, the heat transfer coefficient and friction factor are calculated using data reported by Heatric, a prominent printed circuit heat exchanger manufacturer. Both models are validated by comparing with the data from a small-scale exchanger used in the 100 kWe facility operated by the Naval Nuclear Laboratory, and then applied to design and simulate low- and high-temperature recuperators for a 10 MWe supercritical carbon dioxide indirect recompression closed Brayton cycle, which is of interest to the U.S. Department of Energy. The designs and dynamic responses of the printed circuit heat exchangers are compared with conventional shell-and-tube exchangers and microtube shell-and-tube exchangers for the same applications. Here, the simulation results indicate that the proposed printed circuit heat exchangers have fast dynamic responses due to their small metal masses and high heat transfer coefficients compared with the conventional shell-and-tube exchangers. Even though the metal masses of the designed PCHEs are slightly higher than those of the microtube shell-and-tube exchangers, the printed circuit heat exchangers are still promising candidates for heat recuperation because of their mature manufacturing procedures and abundant laboratory and industrial operating experience.

42 ENGINEERING↗

ISAP-MATLAB Package for Sensitivity Analysis of High-Dimensional Stochastic Chemical Networks

Stochastic simulation and modeling play an important role to elucidate the fundamental mechanisms in complex biochemical networks. The parametric sensitivity analysis of reaction networks becomes a powerful mathematical and computational tool, yielding information regarding the robustness and the identifiability of model parameters. However, due to overwhelming computational cost, parametric sensitivity analysis is a extremely challenging problem for stochastic models with a high-dimensional parameter space and for which existing approaches are very slow. Here we present an information-theoretic sensitivity analysis in path-space (ISAP) MATLAB package that simulates stochastic processes with various algorithms and most importantly implements a gradient-free approach to quantify the parameter sensitivities of stochastic chemical reaction network dynamics using the pathwise Fisher information matrix (PFIM; Pantazis, Katsoulakis, and Vlachos 2013). The sparse, block-diagonal structure of the PFIM makes its computational complexity scale linearly with the number of model parameters. As a result of the gradientfree and the sparse nature of the PFIM, it is highly suitable for the sensitivity analysis of stochastic reaction networks with a very large number of model parameters, which are typical in the modeling and simulation of complex biochemical phenomena. Finally, the PFIM provides a fast sensitivity screening method (Arampatzis, Katsoulakis, and Pantazis 2015) which allows it to be combined with any existing sensitivity analysis software.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The role of ambient gas confinement, plasma chemistry, and focusing conditions on emission features of femtosecond laser-produced plasmas

Ultrafast laser ablation coupled with optical emission spectroscopy is currently under development for standoff detection of elements and their isotopes for a wide range of application areas. In this work, we explore the role of ambient air pressure during the interaction of an ultrafast laser beam with two metallic targets (brass and uranium) with significantly different oxygen gas-phase reactivity. Plasma plumes were generated by focusing ~800 nm, ~35 fs pulses from an ultrafast laser system using a long focal length lens with f = 1 m. Two-dimensional spectral imaging was performed over the pressure range of 30 mTorr-700 Torr air to evaluate emission dynamics, plasma chemistry, signal-to-background ratio, and characteristic parameters (i.e. excitation temperature, electron density). An increase in ambient air pressure during ultrafast laser ablation leads to plume confinement and subsequent changes in the emission dynamics due to plasma chemistry as well as changes in plasma generation conditions (i.e. focused fs laser ablation versus filament ablation). Ablation crater morphologies were also investigated via scanning electron microscopy. Results indicate atomic emission intensity and signal-to-background ratios peak at moderate pressure levels (~50-100 Torr air) for both targets studied, although plasma chemistry influences uranium emission signatures. The emission features of the uranium plasma at pressures = 10 Torr showed the presence of atoms and oxide molecules which are co-located within the plume. We also find filament ablation leads to wider, more shallow craters compared to focused laser ablation. Our study provides unique insight into the interplay between plume dynamics, confinement, and oxygen chemistry of fs laser-produced plasmas and how these phenomena evolve with changing ambient air pressure.

Laser-produced plasma↗

Exceptional points in classical spin dynamics

Abstract Non-conservative physical systems admit a special kind of spectral degeneracy, known as exceptional point (EP), at which eigenvalues and eigenvectors of the corresponding non-Hermitian Hamiltonian coalesce. Dynamical parametric encircling of the EP can lead to non-adiabatic evolution associated with a state flip, a sharp transition between the resonant modes. Physical consequences of the dynamical encircling of EPs in open dissipative systems have been explored in optics and photonics. Building on the recent progress in understanding the parity-time ( $${\mathscr{P}}{\mathscr{T}}$$ P T )-symmetric dynamics in spin systems, we use topological properties of EPs to implement chiral non-reciprocal transmission of a spin through the material with non-uniform magnetization, like helical magnet. We consider an exemplary system, spin-torque-driven single spin described by the time-dependent non-Hermitian Hamiltonian. We show that encircling individual EPs in a parameter space results in non-reciprocal spin dynamics and find the range of optimal protocol parameters for high-efficiency asymmetric spin filter based on this effect. Our findings offer a platform for non-reciprocal spin devices for spintronics and magnonics.

36 MATERIALS SCIENCE↗

NPFTURBULENCE: Fast Response Temperature by Airborne Measurements

The original data were collected during the field campaign of the “Turbulent layers promoting New Particle Formation” experiment (NPFTURBULENCE; https://www.arm.gov/research/campaigns/aaf2024npfturbulence; https://www.arm.gov/publications/programdocs/doe-sc-arm-25-004.pdf ) over the Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) Atmospheric Observatory (https://www.arm.gov/capabilities/observatories/sgp ) in north-central Oklahoma. The ARM Aerial Facility ArcticShark uncrewed aerial system (UAS, https://www.arm.gov/capabilities/observatories/aaf/uas) was based at Blackwell–Tonkawa Municipal Airport (IATA: BWL, ICAO: KBKN, FAA LID: BKN, 36.74475° N, 97.34918° W, 313.9 m MSL), for the field campaign from May 5 through May 29, 2024. The ArcticShark UAS performed 11 flights, including 10 research flights over the Central Facility of the ARM SGP to measure atmospheric state, turbulence, surface IR temperature and imagery, aerosol number concentration and size distribution. The current dataset presents fast response temperature in the atmospheric boundary layer and lower free troposphere measured on the airborne platform throughout the field campaign. The primary instruments used to create the current dataset were the fine wire thermocouple probe, Pitot-static system (part of the UAS control), and infrared gas analyzer sensor for H2O and CO2 (LI-840A). All parameters used in the temperature calculations (static and dynamic pressure, absolute humidity in form of dew point temperature) were included in the data set. For user convenience, one additional parameter was also included: the type of flight flag (level, up, down, turn, and combination of thereof).

Air temperature↗

Assessment of a Smoothed Particle Hydrodynamics Method for Thin Film on Textured Surfaces

A large number of previous studies suggest that the behavior of the near-wall liquid micro-layer plays a key role in boiling heat transfer and boiling crisis; see examples. The thin liquid layer interacts with heater surface and 'external' two-phase flow. The net effects of these interactions define the micro-hydrodynamics that leads to dryout. As a result, a good understanding of the thin-layer hydrodynamics is significant for the accurate prediction of CHF. Recently, with the advent of nanotechnology including micro-scale manufacturing, it becomes possible to perform high heat-flux boiling experiments with controlled surface conditions. Although many reports show rich observations about the effects of surface characteristics on CHF, physical mechanisms remain not fully understood. In order to have better understanding of the above phenomena, several computational models are developed, ranging from the lubrication theory to CFD methods. The former models are limited to one-dimensional formulation and unable to deal with the dry-out phenomena. It turns out that CFD methods have a greater potential for the mechanistic study of boiling. Towards the study objective, a particle-based CFD method called Smoothed Particle Hydrodynamics (SPH) is adopted. SPH is a Lagrangian particle method for solving systems of partial differential equations. Originally SPH is proposed for fluid dynamics in the context of astrophysical problems. Because mass and density are introduced during the particle approximation, SPH is also applied in fluid dynamic problems, where mass and density are important parameters to determine, without mass loss (a limitation of interface capturing schemes in mesh-based methods). Besides, geometrically complex and/or dynamic boundaries and interfaces can be handled without undue difficulty in SPH. Currently, most SPH simulations focus on large-scale scenarios (meter scale), like flooding and solitary wave. Also some works have been done with SPH in pore-scale. As for micro- or nano-scale simulation, people usually apply Dissipative Particle Dynamics (DPD) and Molecular Dynamics (MD) for particle-based simulation. Almost no work has been done on micro-scale with SPH, so assessments are needed to investigate the capability of SPH in application of micro-hydrodynamics. The Phenomena Identification and Ranking Table (PIRT) is applied to align application's technical requirements with associated physics and materials, models, simulation code capabilities and verification, validation and uncertainty quantification activities. The figures of merit are determined as: (1) Timing of micro-layer rewetting dry surface; (2) Effects of surface features. The corresponding key phenomena are determined as: (1) Hydrodynamics; (2) Interface Dynamics; (3) Energy; (4) Surface Effect. This study deals with isothermal scenario and no energy term is considered. Based on the current needs, a new SPH package, Micro-SPH, is compiled based on SPHysics with surface tension and wettability built in. Test cases are performed with Micro-SPH to assess the capability of SPH to each phenomenon identified. NEUTRINO with incompressible SPH solver is employed to investigate micro-fluid dynamics on a surface with uniformly distributed cylindrical pillars for application purposes. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Learning effective SDEs from Brownian dynamic simulations of colloidal particles

We construct a reduced, data-driven, parameter dependent effective stochastic differential equation (eSDE) for electric-field mediated colloidal crystallization using data obtained from Brownian dynamics simulations. We use diffusion maps (a manifold learning algorithm) to identify a set of useful latent observables. In this latent space we identify an eSDE using a deep learning architecture inspired by numerical stochastic integrators and compare it with the traditional Kramers–Moyal expansion estimation. We show that the obtained variables and the learned dynamics accurately encode the physics of the Brownian dynamic simulations. We further illustrate that our reduced model captures the dynamics of corresponding experimental data. Further, our dimension reduction/reduced model identification approach can be easily ported to a broad class of particle systems dynamics experiments/models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synchronization transition of identical phase oscillators in a directed small-world network

We numerically study a directed small-world network consisting of attractively coupled, identical phase oscillators. While complete synchronization is always stable, it is not always reachable from random initial conditions. Depending on the shortcut density and on the asymmetry of the phase coupling function, there exists a regime of persistent chaotic dynamics. By increasing the density of shortcuts or decreasing the asymmetry of the phase coupling function, we observe a discontinuous transition in the ability of the system to synchronize. Using a control technique, we identify the bifurcation scenario of the order parameter. We also discuss the relation between dynamics and topology and remark on the similarity of the synchronization transition to directed percolation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Design of 3 GeV booster ring lattice

The aim of this study is to design of a 3 GeV booster ring for the 3 GeV storage ring. Electrons are needed to be accelerated to 3.0 GeV from 0.15 GeV energy. In this frame, we studied on two options for booster ring; a compact booster and the booster that shares the same tunnel with the storage ring. The lattice type has been chosen FODO for both options, lattice parameters are calculated, sextupole magnets are used to decrease dynamic aperture problem and dynamic aperture calculations are also made with considering of the necessary conditions. After designing and calculating of the parameters, these designs have been compared with each other. In addition to this comparison, these booster design parameters have been compared with some world centers design parameters and the reliability of the booster design is seen. Beam optics, OPA and Elegant simulation programs have been used in the study calculations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quantifying the phase diagram and Hamiltonian of S = 1/2 kagome antiferromagnets: bridging theory and experiment

Spin-1/2 kagome antiferromagnets are leading candidates for realizing quantum spin liquid (QSL) ground states. While QSL ground states are predicted for the pure Heisenberg model, understanding the robustness of the QSL to additional interactions that may be present in real materials is a forefront question in the field. Here we employ large-scale density-matrix renormalization group simulations to investigate the effects of next-nearest neighbor exchange couplings J 2 and Dzyaloshinskii-Moriya interactions D, which are relevant to understanding the prototypical kagome materials herbertsmithite and Zn-barlowite. By utilizing clusters as large as XC12 and extrapolating the results to the thermodynamic limit, we precisely delineate the scope of the QSL phase, which remains robust across an expanded parameter range of J 2 and D. Direct comparison of the simulated static and dynamic spin structure factors with inelastic neutron scattering reveals the parameter space of the Hamiltonians for herbertsmithite and Zn-barlowite, and, importantly, provides compelling evidence that both materials exist within the QSL phase. These results establish a powerful convergence of theory and experiment in this most elusive state of matter.

Jiang, Shengtao [SLAC National Accelerator Laborat↗

Pair momentum dependence of a tilted source in heavy-ion collisions

In noncentral heavy-ion collisions, the particle-emitting source can be tilted away from the beam direction, an effect that becomes particularly significant at collision energies of a few GeV and lower. This phenomenon, manifest itself in many observables such as directed flow, polarization, and vorticity, is therefore important to investigate. Here, in this paper, we study the consistency between the tilt extracted directly from the freeze-out distribution of pions and the tilt parameter obtained using the azimuthally sensitive femtoscopy (asHBT) method. Using the Ultrarelativistic Quantum Molecular Dynamics model, we demonstrate a strong dependence of the tilt parameter extracted with asHBT on the momentum of the particle pair. Considering the experimental challenges in accessing low particle momenta—where the tilt parameter extracted with asHBT closely matches the tilt of the freeze-out distribution of pions—we propose an exponential extrapolation method to obtain the tilt of the entire freeze-out distribution. This approach aims to enhance the accuracy of experimental measurements of tilt in noncentral heavy-ion collisions.

particle correlations & fluctuations↗

The nucleation process and the roles of structure and density fluctuations in supercooled liquid Fe

We observed homogeneous nucleation process of supercooled liquid Fe by molecular dynamics simulations. Using bond-orientational order parameters together with Voronoi polyhedron method, we characterized local structure, calculated the volume of Voronoi polyhedra of atoms and identified the structure and density fluctuations. We monitored the formation of nucleus and analyzed its inner structure. The birth and growth of the pre-nucleus and nucleus are accompanied with aggregating and disaggregating processes in the time scale of femtosecond. Only the initial solid-like clusters (ISLC), ranging from 1 to 7 atoms, pop up directly from liquid. The relation between the logarithm of number of clusters and the cluster size was found to be linear for ISLCs and was observed to be parabolic for all solid-like clusters (SLC) due to aggregating and disaggregating effects. The nucleus and pre-nuclei mainly consist of body centered cubic (BCC) and hexagonal close packed atoms, while the BCC atoms tend to be located at the surface. Medium-range structure fluctuations induce the birth of ISLCs, benefit the aggregation of embryos and remarkably promote the nucleation. But density fluctuations contribute little to nucleation. The lifetime of most icosahedral-like atoms (ICO) is shorter than 0.7 ps. No obvious relationship was found between structure/density fluctuations and the appearance of ICO atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Versatile laser-free trapped-ion entangling gates

We present a general theory for laser-free entangling gates with trapped-ion hyperfine qubits, using either static or oscillating magnetic-field gradients combined with a pair of uniform microwave fields symmetrically detuned about the qubit frequency. By transforming into a 'bichromatic' interaction picture, we show that either ${\hat{\sigma }}_{\phi }\otimes {\hat{\sigma }}_{\phi }$ or ${\hat{\sigma }}_{z}\otimes {\hat{\sigma }}_{z}$ geometric phase gates can be performed. The gate basis is determined by selecting the microwave detuning. The driving parameters can be tuned to provide intrinsic dynamical decoupling from qubit frequency fluctuations. The ${\hat{\sigma }}_{z}\otimes {\hat{\sigma }}_{z}$ gates can be implemented in a novel manner which eases experimental constraints. Here, we present numerical simulations of gate fidelities assuming realistic parameters.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Partially polaron-transformed quantum master equation for exciton and charge transport dynamics

Polaron-transformed quantum master equation (PQME) offers a unified framework to describe the dynamics of quantum systems in both limits of weak and strong couplings to environmental degrees of freedom. Thus, the PQME serves as an efficient method to describe charge and exciton transfer/transport dynamics for a broad range of parameters in condensed or complex environments. However, in some cases, the polaron transformation (PT) being employed in the formulation invokes an over-relaxation of slow modes and results in premature suppression of important coherence terms. A formal framework to address this issue is developed in the present work by employing a partial PT that has smaller weights for low frequency bath modes. In this work, it is shown that a closed form expression of a second order time-local PQME including all the inhomogeneous terms can be derived for a general form of partial PT, although more complicated than that for the full PT. All the expressions needed for numerical calculation are derived in detail. Applications to a model of a two-level system coupled to a bath of harmonic oscillators, with test calculations focused on those due to homogeneous relaxation terms, demonstrate the feasibility and the utility of the present approach.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗