Search NASA⌕ Search

SEARCH · Search NASA

Results for “Enhanced Sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Consolidation of iodine-loaded Ag 0 -functionalized silica aerogel with HUP, HIP and SPS

The U.S. Department of Energy is currently investigating alternative sorbents for the removal and immobilization of radioiodine from the gas streams in a nuclear fuel reprocessing plant. One of these new sorbents, silver-functionalized silica aerogel (Ag 0 -aerogel), shows promise as a potential replacement for silver mordenite because of its high selectivity and sorption capacity for iodine. Moreover, a feasible consolidation of iodine-loaded Ag 0 -aerogel to a durable SiO 2 -based waste form makes this aerogel an attractive choice for sequestering radioiodine. The main purpose of the study reported here was to investigate consolidation of Ag 0 -aerogel powders with or without iodine and with or without sintering additives with hot uniaxial pressing (HUP), HIP, and SPS. The selected densified samples were analyzed with a helium gas pycnometer for apparent density, with the Archimedes method for open porosity and apparent density, with scanning electron microscopy and energy dispersive spectroscopy (SEM-EDS) for the extent of densification, macro- and microstructural changes, and distribution of individual elements, and with X-ray diffraction (XRD) for crystalline phases. To convert the iodine-loaded Ag 0 -silica aerogel to a waste form, rapid consolidation with HUP, HIP, and SPS at moderate temperatures and pressures yields a final waste form consisting of AgI particles encapsulated in fused silica. HUP-processing (1200°C for 30 min under 29 MPa pressure) of Ag 0 -aerogel loaded with 20.2 mass% of iodine provided a product with residual open porosity of 16.9%. However, ~93% of sorbed iodine was retained in the sintered material. Densification with HIP at 1200°C for 30 min under 207 MPa pressure resulted in a fully dense silica-based waste form of 3.3 $\times$ 10 3 kg/m 3 bulk density containing ~22 mass% of iodine. Iodine was retained in the form of nano- and micro-inclusions of AgI dispersed in the silica matrix. Additives were not needed to enhance sintering process as depicted from the lack of open porosity and 100% retention of iodine in the consolidated product. The future tests will tell whether additives such as raw silica aerogel or Ag 0 -aerogel are required for HIPing to produce a fully dense waste form from iodine-loaded Ag 0 -aerogel containing higher concentrations of captured iodine. SPS-processing of samples with or without iodine revealed a benefit of additive-enhanced sintering. The samples containing additives (raw silica aerogel, colloidal silica, and Ag 0 -aerogel) shrunk faster and at lower temperatures. In addition, additives significantly improved distribution of silver compounds in the fully densified products, considerably decreasing the number of micron-sized inclusions of AgI, Ag and Ag 2 S at the grain boundaries.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

The effect of Ca-Fe-As coatings on microbial leaching of metals in arsenic bearing mine waste

Globally arsenic (As) is a ubiquitous trace element derived from the natural weathering of As-bearing rock. With the onset of reducing conditions, the prevalence of aqueous As(III) may be intensified through biotic and abiotic processes. Here we evaluate the stability of arsenic bearing Ca-Fe hydroxide phases collected from exposed tailings at Ketza River mine, Yukon, Canada, during the reductive dissolution of both acid treated and untreated samples by Shewanella putrefaciens 200R and Shewanella sp. ANA-3. Samples were acid treated in order to remove Ca-Fe oxide coatings and evaluate the influence of these coatings on the rates of microbial Fe(III) and As(V) reduction. Environmental scanning electron microscope (ESEM) micrographs of the solid phase show significant differences in the chemistry and physical morphology of the material by the bacteria over time and are especially evident in the acid treated samples. Moreover, while solution chemistry showed similar As(III) respiration rates of the inoculated acid treated samples for both ANA3 and 200R at {approx}1.1 x 10{sup -6} {micro}M {center_dot} s{sup -1} {center_dot} m{sup -2}, the Fe(II) respiration rates differed at 1.4 x 10{sup -7} and 9.5 x 10{sup -8} {micro}M {center_dot} s{sup -1} {center_dot} m{sup -2} respectively, thus suggesting strain specific metal reduction metabolic pathways Additionally, the enhanced metal reduction observed in the acid treated inoculated samples suggests that the presence of the Ca-Fe hydroxide phase in the untreated samples acted as a barrier, inhibiting the bacteria from accessing the metals. This has implications for increased mobilization of metals by metal reducing bacteria within areas of increased acidity, such as acid mine drainage sites and industrial tailings ponds that can come into contact with surface and ground water sources.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Effects of aluminum substitution on photocatalytic property of BiVO{sub 4} under visible light irradiation

Graphical abstract: Visible-light-driven Al/BiVO{sub 4} photocatalyst was prepared by a hydrothermal process. After introducing Al, the BiVO{sub 4} particles retain monoclinic scheelite structures and the ability of visible light absorption is enhanced. XPS and FTIR results reveal that the Al ions influence the local structure of the BiVO{sub 4}. The photocatalytic experiments demonstrate that the Al species incorporation can effectively enhance the photocatalytic activity of BiVO{sub 4} due to the existence of distorted VO{sub 4}{sup 3-} tetrahedron and the stronger optical absorption intensity. Highlights: Black-Right-Pointing-Pointer The visible-light-driven Al/BiVO{sub 4} photocatalysts are first prepared in our study. Black-Right-Pointing-Pointer It is found that Al is introduced into the BiVO{sub 4} lattice successfully. Black-Right-Pointing-Pointer The Al-doped BiVO{sub 4} shows a far higher photocatalytic activity than undoped BiVO{sub 4}. Black-Right-Pointing-Pointer One of the reason for the higher activity is the distorted VO{sub 4}{sup 3-} tetrahedron. Black-Right-Pointing-Pointer Another reason for the higher activity is the strong optical absorption intensity. -- Abstract: Novel visible-light-driven Al/BiVO{sub 4} photocatalysts were synthesized via a facile hydrothermal method for the first time. The samples were characterized by X-ray diffraction, N{sub 2}-sorption, UV-vis diffuse reflectance spectra, scanning electron microscopy, high-resolution transmission electron microscopy, Fourier transformed infrared spectra and X-ray photoelectron spectroscopy. The photocatalytic activity of the samples was evaluated by the decomposition of methylene blue under visible light irradiation (400 nm < {lambda} <580 nm) and was compared with that of single-phase BiVO{sub 4}. The results revealed that the introduction of Al can improve photocatalytic performance greatly and different concentration of Al resulted in different photocatalytic activity. The highest activity is obtained by the sample with a doping concentration of 12 at%. The reason for the enhanced photocatalytic activities of Al/BiVO{sub 4} samples was also discussed in this paper.

36 MATERIALS SCIENCE↗

Ag-LaFeO3 nanoparticles using molecular imprinting technique for selective detection of xylene

Highlights: • Ag-LaFeO{sub 3} based gas sensor using molecular imprinting technique has been successfully applied to the detection of xylene. • Ultrahigh response (resistance ratio = 36.2) to 5 ppm xylene is achieved. • The optimal operating temperature (99 °C) is extremely low. - Abstract: Xylene is a hazardous volatile organic compound, however, the selective detection of ppm-level xylene using oxide semiconductor gas sensor remains a challenging issue. In this study, Ag-LaFeO{sub 3} was modified with molecular imprinting technique, in which methacrylic acid and hydroxyethyl methylacrylate are used as functional monomers, respectively. Based on XRD, EDS, XPS, SEM, TEM, BET nitrogen adsorption observations, the structure and morphology of the samples are characterized. The as-prepared molecularly imprinted nanoparticles with methacrylic acid as functional monomer exhibit high selectivity and response to xylene gas, and the response is dependent on the type and content of the functional monomer. To 5 ppm xylene, the optimal response is 36.2 at the operating temperature of 99 °C. In addition, low cross-responses to the other test gases were observed. The remarkable enhancement in the gas-sensing properties of the samples is attributed to their high specific surface area and molecular imprinting structure.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Integrated fluorescence light microscopy-guided cryo-focused ion beam-milling for in situ montage cryo-ET

Cryogenic-electron tomography (cryo-ET) permits the in situ visualization of biological macromolecules at the molecular level. Owing to the variable thickness of cells, tissues and organisms, frozen specimens may need to be thinned by cryo-focused ion beam (FIB) milling to produce thin (<500 nm) cryo-lamellae suitable for cryo-ET. Locating regions of interest remains a challenge because untargeted milling can lead to inadvertent ablation and removal of regions of interest. Correlative light and electron microscopy, combined with cryo-FIB milling, can guide the identification of labeled targets in the cellular milieu. Multiple transfers between cryo-imaging instruments, cumbersome correlation algorithms, limited accuracy and low throughput have hindered the routine adoption of cryo-FIB milling within a multimodal correlative workflow for in situ structural biology. Here, in this study, we present a workflow for 3D correlative cryo-fluorescence light microscopy-FIB-ET that streamlines fluorescence light microscopy-guided FIB milling, improving throughput while preserving both structural and contextual information. The complete integration of hardware and software described here minimizes sample contamination from cross-platform exchanges and greatly enhances the efficiency of 3D targeting in cryo-milling. We then describe procedures for implementing montage parallel array cryo-ET (MPACT), which can be easily adapted to any modern life-science transmission electron microscope. MPACT supports high-throughput cryo-ET acquisitions (10 tilt series in 1.5 h) for structure determination and comprehensive contextual understanding of macromolecules within their native surroundings. A complete session from sample preparation to MPACT data processing takes 5−7 d for an individual experienced in both cryo-EM and cryo-FIB milling.

Yang, Jie E. [Univ. of Wisconsin, Madison, WI (Uni↗

Detailed modeling of the video signal and optimal readout of charge-coupled devices

This paper provides a practical design methodology to calculate an optimal filter for noise reduction in the readout of charge-coupled devices (CCDs) taking into account the charge transfer and feedthroughs due to capacitive coupling in the CCD. A detailed analysis of the dynamics of the video signal and charge transfer is presented, including the circuital modeling of the output stage of the CCD and the dynamics of the electronics in the video chain before the analog-to-digital (AD) converter. This model is used to compute an optimal filter that minimizes the variance of the pixel noise and uses the samples of the charge transfer, before the charge is fully settled. This is necessary to enhance the performance of previous results that also use optimal filters but do not use the transition samples, while also reducing the pixel readout time, resulting in faster readouts. As a proof of concept for the optimal filter, we present in this paper novel experimental results using a Skipper CCD, which has a floating sense node that allows to measure the charge packet an arbitrary number of times. However, this technique can be applied to any CCD that has a readout system that digitally samples the video signal.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Impedance spectroscopy of organic magnetoresistance devices—Effect of interface disorder

Organic magnetoresistance (OMAR) can be caused by either single carrier (bipolaron) or double carriers (electron-hole)-based mechanisms. In order to consider applications for OMAR, it is important to control the mechanism present in the device. In this paper, we report the effect of traps on OMAR resulting of disorder at the interface between the organic active layer with the hole injection layer [poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate): PEDOT:PSS]. It has been found that while the single carriers OMAR is enhanced by the presence of traps, the double carriers OMAR is totally removed in a sample with a high interface trap density. The reasons for these results are discussed based on the impedance spectroscopy measurements. First, the mechanism (single or double carriers) responsible of the OMAR was determined with the support of the capacitance measurement. Then, the influence of traps was discussed with the Nyquist diagrams and phase angle-frequency plots of the samples. The results suggested that with a rough interface and thus high disorder, the presence of traps enhanced the bipolaron formation. Traps also acted as recombination centers for electron-hole pairs, which prevented the double carriers OMAR in devices with a rough interface. On the other hand, with a low trap density, i.e., with a smooth surface, the single carrier OMAR decreased, and double carriers OMAR appeared. The sign of the OMAR could then be controlled by simply sweeping the bias voltage. This work demonstrated that the roughness at the interface is important for controlling OMAR and its reproducibility, and that the combination of OMAR measurement and impedance spectroscopy is helpful for clarifying the processes at the interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

CALIPSO Observations of Near-Cloud Aerosol Properties as a Function of Cloud Fraction

This paper uses spaceborne lidar data to study how near-cloud aerosol statistics of attenuated backscatter depend on cloud fraction. The results for a large region around the Azores show that: (1) far-from-cloud aerosol statistics are dominated by samples from scenes with lower cloud fractions, while near-cloud aerosol statistics are dominated by samples from scenes with higher cloud fractions; (2) near-cloud enhancements of attenuated backscatter occur for any cloud fraction but are most pronounced for higher cloud fractions; (3) the difference in the enhancements for different cloud fractions is most significant within 5km from clouds; (4) near-cloud enhancements can be well approximated by logarithmic functions of cloud fraction and distance to clouds. These findings demonstrate that if variability in cloud fraction across the scenes used to composite aerosol statistics are not considered, a sampling artifact will affect these statistics calculated as a function of distance to clouds. For the Azores-region dataset examined here, this artifact occurs mostly within 5 km from clouds, and exaggerates the near-cloud enhancements of lidar backscatter and color ratio by about 30. This shows that for accurate characterization of the changes in aerosol properties with distance to clouds, it is important to account for the impact of changes in cloud fraction.

near-cloud aerosol↗

Fabrication and Characterization of Poly(lactic acid) Biocomposites Reinforced by Calcium Sulfate Whisker

The biodegradable poly(lactic acid) (PLA) composites filled with calcium sulfate whisker (CSW) were fabricated via melt-blending and subsequent injection molding. Surface organification of γ-aminopropyltriethoxysilane (APTES) on CSW was applied to accelerate the wettability of PLA to CSW. The mechanical properties, morphological structures, crystallization behaviors and thermal stabilities of PLA/CSW composites were investigated in detail. Results showed that modification of APTES changed the surface morphologies and element compositions, helping to form the well bonded interfaces. By adding CSW, the elastic modulus of PLA/CSW composites presented a sustained increment, while tensile strength, elongation at break and impact toughness were increased first and then decreased. The presence of CSW impeded the melt-crystallization but accelerated the cold-crystallization process. On the whole, the actual crystallinity for the composites was suppressed except for the case with 20% CSW. The thermal stability was enhanced by CSW as expected, and all the samples showed the exact same reaction order (n = 1) according to Carrasco method. Nevertheless, the activation energies were declined, indicating CSW was in favor of thermal decomposition of PLA phases. Finally, it was interestingly found that CSW could improve the comprehensive properties of PLA without deteriorating the processibility.

36 MATERIALS SCIENCE↗

Modified Magnetic and Electrical Properties of Perovskite-Spinel Multiferroic Composites

Multiferroic composite samples (1 − x) Bi{sub 0.9}Pr{sub 0.1}FeO{sub 3}–xNi{sub 0.5}Co{sub 0.5}Fe{sub 2}O{sub 4} for x = 0, 0.1, 0.2, 0.3, and 1.0 were synthesized by sol-gel auto-combustion method. Detailed investigations were made on the structural, magnetic, and electrical properties of these composites. The X-ray diffraction (XRD) patterns confirm the co-existence of perovskite BPFO and spinel ferrite NCFO without any impurity phase. The average particle size of BPFO and NCFO nanoparticles is nearly equal to 110 nm and 35 nm respectively which are confirmed by XRD and transmission electron microscopy (TEM) analysis. Structural and surface morphology are studied by scanning electron microscopy (SEM). The dielectric properties of the composites are also studied at room temperature. The saturation and remnant magnetization are found to increase with increase in NCFO weight percentage in the composites. The saturation magnetization (Ms) values are 3.38 emu/g, 8.65 emu/g, and 13.87 emu/g and coercivity (Hc) values are 936.52 Oe, 1058.12 Oe, and 1046.77 Oe for BPFO-NCFO 1, 2, and 3 composite samples respectively. The incorporation of BPFO and NCFO enhances the multiferroic properties in the present composite materials which are quite promising for applications point of view.

36 MATERIALS SCIENCE↗

On the correlation between the porous structure and the electrochemical response of powdered and monolithic carbon aerogels as electrodes for capacitive deionization

The combined effect of resorcinol/catalyst (100≤R/C≤800) and resorcinol/water (0.04≤R/W≤0.13) molar ratio on the textural and capacitive properties of carbon aerogels with potential application for capacitive deionization has been evaluated. Activated and pyrolyzed aerogels were synthesized by the sol-gel polymerization of resorcinol-formaldehyde mixtures and dried in supercritical conditions. Data show that high R/C and R/W molar ratios lead to materials with large pores in the mesopore range, whereas the surface area and micropore volumes remain somewhat the same. The activation of the aerogels increased the differences in the specific surface and micropore volumes due to the development of microporosity. This effect was more remarkable for the samples with low R/C whatever the R/W ratio, indicating that the carbon aerogel obtained using high amounts of catalyst are more prone to be activated. Regarding the electrochemical features of the aerogels, low capacitance values were measured in aerogels combining low R/W and high R/C and reciprocally low R/C and high R/W molar ratios, due to their higher resistance. Polarization resistances were found to be slightly higher for the pyrolyzed than for activated aerogels, and followed a decreasing trend with the mesoporosity, indicating the outstanding contribution of the mesoporous network to provide a good kinetic response. The desalting capacity of monolithic aerogels showed a simultaneous dependence with the surface area and the resistivity of the electrodes, pointing out the importance of performing electrochemical measurements in adequate cell configurations (i.e., desalting units) upon the intended application. - Graphical abstract: The textural properties of carbon aerogels are strongly influenced by the synthesis parameters precursor to catalyst (R/C) and water (R/C) ratios. The volumetric capacitance measured in a symmetric cell with monolithic electrodes of carbon aerogel strongly correlates with both surface area and electrical resistivity. - Highlights: • Influence of the synthesis conditions on the properties of carbon aerogels is reported. • Specific surface decreases in the activated samples when either R/C or R/W increase. • An enhanced decrease of the capacitance was observed when R/C and R/W increase. • Ohmic resistance of the electrodes that strongly depends on the R/W and R/C. • Electrosorption capacity is successfully correlated to surface area and resistivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Extrusion of Unhomogenized Castings of 7075 Aluminum via ShAPE

Extrusion of unhomogenized castings of 7075 aluminum (Al) alloy has been accomplished using shear assisted processing and extrusion (ShAPE). The simultaneous plastic deformation and heat generation during ShAPE rapidly fracture and dissolve interdendritic and intragranular secondary phases of Al-Zn-Mg-Cu, accomplishing homogenization in seconds rather than many hours in a furnace prior to extrusion. ShAPE thereby eliminates the energy-intensive and time-consuming homogenization step required to prepare as-cast microstructures for conventional extrusion. Concurrently, extensive grain refinement occurs due to gradient activation of dynamic recrystallization during ShAPE, which facilitates a threefold increase in extrusion speed compared to the conventional extrusion method. Evident enhancement of the mechanical properties of ShAPE+T6 samples is achieved, compared to the ASTM standard values for conventional extrusion products. The microstructural evolution pathway, involving the processes of grain refinement and secondary particle dissolution, is explained using scanning and transmission electron microscopy.

36 MATERIALS SCIENCE↗

The effect of annealing on the photoluminescence of layered perovskite H{sub 1.77}[Sr{sub 0.8}Bi{sub 0.21}Ta{sub 2}O{sub 7}] powders

The microstructural and luminescent properties of H{sub 1.77}[Sr{sub 0.8}Bi{sub 0.21}Ta{sub 2}O{sub 7}] powders under different dehydrating conditions were investigated. The powders were obtained by protonating Bi{sub 2}SrTa{sub 2}O{sub 9} powders in 3 M aqueous HCl solution, and were dehydrated by a post-annealing in air from 250 to 700 {sup o}C. The photoluminescence was enhanced for all dehydrated powders, especially for the sample annealed at 400 {sup o}C. The thermogravimetric analysis showed that there is an obvious dehydration temperature range from 200 to 400 {sup o}C, which was corresponding to the changing of the microstructure and photoluminescence in the same temperature range. The mechanism behind the experimental results was discussed.

36 MATERIALS SCIENCE↗

Enhancing molecular design efficiency: Uniting language models and generative networks with genetic algorithms

This study examines the effectiveness of generative models in drug discovery, material science, and polymer science, aiming to overcome constraints associated with traditional inverse design methods relying on heuristic rules. Generative models generate synthetic data resembling real data, enabling deep learning model training without extensive labeled datasets. They prove valuable in creating virtual libraries of molecules for material science and facilitating drug discovery by generating molecules with specific properties. While generative adversarial networks (GANs) are explored for these purposes, mode collapse restricts their efficacy, limiting novel structure variability. To address this, we introduce a masked language model (LM) inspired by natural language processing. Although LMs alone can have inherent limitations, we propose a hybrid architecture combining LMs and GANs to efficiently generate new molecules, demonstrating superior performance over standalone masked LMs, particularly for smaller population sizes. This hybrid LM-GAN architecture enhances efficiency in optimizing properties and generating novel samples.

97 MATHEMATICS AND COMPUTING↗

Single Crystalline Na 0.67 Ni 0.33 Mn 0.67 O 2 Positive Electrode Material via Molten Salt Synthesis for Sodium Ion Batteries

P2-layered Na 0.67 Ni 0.33 Mn 0.67 O 2 (NNMO) has emerged as a promising positive electrode material for sodium ion batteries due to its appealing electrochemical properties. Synthesis of polycrystalline NNMO (PC-NNMO) materials through conventional calcination of solid precursors remains the prevailing method, where heating occurs in a dry environment with air or O 2 . On the other hand, the molten salt method, where precursors are submerged in molten salt medium during calcination, emerged in recent years to be a scalable technique for more controlled crystal growth and uniform morphology in a variety of materials. Here, we utilize the molten salt method to synthesize single crystalline NNMO (SC-NNMO) materials with enhanced electrochemical properties. The SC-NNMO material exhibits an initial specific discharge capacity of 95 mAh g –1 at a 0.1C rate, retaining approximately 88.5% of its capacity after 100 cycles over a wide voltage range of 2.0–4.2 V. Furthermore, SC-NNMO maintains a capacity retention of 83.9% after 300 cycles at a 1C rate compared to 66.6% for PC-NNMO, indicating excellent long-term cycling stability. This stability is further confirmed by the performance of an SC-NNMO//hard carbon full cell, which retains 90.3% of its capacity after 200 cycles at 1C within a voltage window of 1.9–4.1 V. The enhancement in stability of the SC-NNMO sample is attributed to the single crystalline structure suppressing the undesired P2–O2 phase transition at high voltage. This study also presents an easy, efficient, and straightforward molten salt process for SC-NNMO material synthesis, offering valuable insights into the potential application of such methodology for the large-scale, cost-effective production of various sodium-layered transition metal oxide positive electrode materials for SIBs.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

High-Density Ultra-small Clusters and Single-Atom Fe Sites Embedded in Graphitic Carbon Nitride (g-C 3 N 4 ) for Highly Efficient Catalytic Advanced Oxidation Processes

Ultra-small metal clusters have attracted great attention owing to their superior catalytic performance and extensive application in heterogeneous catalysis. However, the synthesis of high-density metal clusters is very challenging due to their facile aggregation. In this work, one-step pyrolysis was used to synthesize ultra-small clusters and single-atom Fe sites embedded in graphitic carbon nitride with high density (iron loading up to 18.2 wt %), evidenced by high-angle annular dark field-scanning transmission electron microscopy, X-ray absorption spectroscopy, X-ray photoelectron spectroscopy, and 57 Fe Mössbauer spectroscopy. The catalysts exhibit enhanced activity and stability in degrading various organic samples in advanced oxidation processes. The drastically increased metal site density and stability provide useful insights into the design and synthesis of cluster catalysts for practical application in catalytic oxidation reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗