Search NASA⌕ Search

SEARCH · Search NASA

Results for “Enhanced Sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Large bandgap blueshifts in the InGaP/InAlGaP laser structure using novel strain-induced quantum well intermixing

We report on a novel quantum well intermixing (QWI) technique that induces a large degree of bandgap blueshift in the InGaP/InAlGaP laser structure. In this technique, high external compressive strain induced by a thick layer of SiO{sub 2} cap with a thickness ≥1 μm was used to enhance QWI in the tensile-strained InGaP/InAlGaP quantum well layer. A bandgap blueshift as large as 200 meV was observed in samples capped with 1-μm SiO{sub 2} and annealed at 1000 °C for 120 s. To further enhance the degree of QWI, cycles of annealing steps were applied to the SiO{sub 2} cap. Using this method, wavelength tunability over the range of 640 nm to 565 nm (∼250 meV) was demonstrated. Light-emitting diodes emitting at red (628 nm), orange (602 nm), and yellow (585 nm) wavelengths were successfully fabricated on the intermixed samples. Our results show that this new QWI method technique may pave the way for the realization of high-efficiency orange and yellow light-emitting devices based on the InGaP/InAlGaP material system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

New approaches for metabolomics by mass spectrometry

Small molecules constitute a large part of the world around us, including fossil and some renewable energy sources. Solar energy harvested by plants and bacteria is converted into energy rich small molecules on a massive scale. Some of the worst contaminants of the environment and compounds of interest for national security also fall in the category of small molecules. The development of large scale metabolomic analysis methods lags behind the state of the art established for genomics and proteomics. This is commonly attributed to the diversity of molecular classes included in a metabolome. Unlike nucleic acids and proteins, metabolites do not have standard building blocks, and, as a result, their molecular properties exhibit a wide spectrum. This impedes the development of dedicated separation and spectroscopic methods. Mass spectrometry (MS) is a strong contender in the quest for a quantitative analytical tool with extensive metabolite coverage. Although various MS-based techniques are emerging for metabolomics, many of these approaches include extensive sample preparation that make large scale studies resource intensive and slow. New ionization methods are redefining the range of analytical problems that can be solved using MS. This project developed new approaches for the direct analysis of small molecules in unprocessed samples, as well as pushed the limits of ultratrace analysis in volume limited complex samples. The projects resulted in techniques that enabled metabolomics investigations with enhanced molecular coverage, as well as the study of cellular response to stimuli on a single cell level. Effectively individual cells became reaction vessels, where we followed the response of a complex biological system to external perturbation. We established two new analytical platforms for the direct study of metabolic changes in cells and tissues following external perturbation. For this purpose we developed a novel technique, laser ablation electrospray ionization (LAESI), for metabolite profiling of functioning cells and tissues. The technique was based on microscopic sampling of biological specimens by mid-infrared laser ablation followed by electrospray ionization of the plume and MS analysis. The two main shortcomings of this technique had been limited specificity due to the lack of a separation step, and limited molecular coverage, especially for nonpolar chemical species. To improve specificity and the coverage of the metabolome, we implemented the LAESI ion source on a mass spectrometer with ion mobility separation (IMS). In this system, the gas phase ions produced by the LAESI source were first sorted according to their collisional cross sections in a mobility cell. These separated ion packets were then subjected to MS analysis. By combining the atmospheric pressure ionization with IMS, we improved the metabolite coverage. Further enhancement of the non-polar metabolite coverage resulted from the combination of laser ablation with vacuum UV irradiation of the ablation plume. Our results indicated that this new ionization modality provided improved detection for neutral and non-polar compounds. Based on rapid progress in photonics, we had introduced another novel ion source that utilized the interaction of a laser pulse with silicon nanopost arrays (NAPA). In these nanophotonic ion sources, the structural features were commensurate with the wavelength of the laser light. The enhanced interaction resulted in high ion yields. This ultrasensitive analytical platform enabled the MS analysis of single yeast cells. We extended these NAPA studies from yeast to other microorganisms, including green algae (Chlamydomonas reinhardtii) that captured energy from sunlight on a massive scale. Combining cellular perturbations, e.g., through environmental changes, with the newly developed single cell analysis methods enabled us to follow dynamic changes induced in the cells. In effect, we were able to use individual cells as a “laboratory,” and approached the long-standing goal of establishing a “lab-in-a-cell.” Model systems for these studies included cells of cyanobacteria (Anabaena), yeast (Saccharomyces cerevisiae), green algae (C. reinhardtii) and Arabidopsis thaliana.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The apparent solubility of aluminum (III) in Hanford high-level waste

The solubility of aluminum in Hanford nuclear waste impacts on the process ability of the waste by a number of proposed treatment options. For many years, Hanford staff has anecdotally noted that aluminum appears to be considerably more soluble in Hanford waste than the simpler electrolyte solutions used as analogues. There has been minimal scientific study to confirm these anecdotal observations, however. The present study determines the apparent solubility product for gibbsite in 50 tank samples. The ratio of hydroxide to aluminum in the liquid phase for the samples is calculated and plotted as a function of total sodium molarity. Total sodium molarity is used as a surrogate for ionic strength, because the relative ratios of mono, di and trivalent anions are not available for all of the samples. These results were compared to the simple NaOH-NaAl(OH{sub 4})H{sub 2}O system, and the NaOH-NaAl(OH{sub 4})NaCl-H{sub 2}O system data retrieved from the literature. The results show that gibbsite is apparently more soluble in the samples than in the simple systems whenever the sodium molarity is greater than two. This apparent enhanced solubility cannot be explained solely by differences in ionic strength. The change in solubility with ionic strength in simple systems is small compared to the difference between aluminum solubility in Hanford waste and the simple systems. The reason for the apparent enhanced solubility is unknown, but could include. kinetic or thermodynamic factors that are not present in the simple electrolyte systems. Any kinetic explanation would have to explain why the samples are always supersaturated whenever the sodium molarity is above two. Real waste characterization data should not be used to validate thermodynamic solubility models until it can be confirmed that the apparent enhanced gibbsite solubility is a thermodynamic effect and not a kinetic effect.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Simulation Study of High-Precision Characterization of MeV Electron Interactions for Advanced Nano-Imaging of Thick Biological Samples and Microchips

The resolution of a mega-electron-volt scanning transmission electron microscope (MeV-STEM) is primarily governed by the properties of the incident electron beam and angular broadening effects that occur within thick biological samples and microchips. A precise understanding and mitigation of these constraints require detailed knowledge of beam emittance, aberrations in the STEM column optics, and energy-dependent elastic and inelastic critical angles of the materials being examined. This simulation study proposes a standardized experimental framework for comprehensively assessing beam intensity, divergence, and size at the sample exit. This framework aims to characterize electron-sample interactions, reconcile discrepancies among analytical models, and validate Monte Carlo (MC) simulations for enhanced predictive accuracy. Our numerical findings demonstrate that precise measurements of these parameters, especially angular broadening, are not only feasible but also essential for optimizing imaging resolution in thick biological samples and microchips. By utilizing an electron source with minimal emittance and tailored beam characteristics, along with amorphous ice and silicon samples as biological proxies and microchip materials, this research seeks to optimize electron beam energy by focusing on parameters to improve the resolution in MeV-STEM/TEM. This optimization is particularly crucial for in situ imaging of thick biological samples and for examining microchip defects with nanometer resolutions. Our ultimate goal is to develop a comprehensive mapping of the minimum electron energy required to achieve a nanoscale resolution, taking into account variations in sample thickness, composition, and imaging mode.

36 MATERIALS SCIENCE↗

HFTS-1 (Final Report)

Despite the long history of hydraulic fracturing, the optimal number of fracturing stages during multi-stage fracture stimulation in horizontal wells can be a complex subject. In addition to the increased expense of multistage fracturing in horizontal wells, increasing the number of fracturing stages does not always correlate with a commensurate increase in production. The problem is the application of a uniform fracture stimulation design to all stages with no consideration for geological variations along the wellbore. The result is an inefficient use and costly waste of energy and water. Optimization of the fracturing process requires an understanding of the cause-and-effect relationship between fracturing parameters and local geological properties at a given location along the wellbore. Realizing that the generalized rock mechanics theories and hypotheses are not truly applicable to fractured and laminated shales, quantifiable impacts of a shale’s geomechanical and depositional features are a prerequisite for design and implementation of optimized hydraulic fractures. The overarching goal of this project is to understand and define the relationships of shale geology and fracture dynamics using detailed field data that includes coring of the fracture domain. Finally, resource recovery from shale formations is estimated to be less than fifteen percent. Research proposed in this project will establish the foundations for investigating enhanced recovery techniques for increased resource recovery in existing fracture treated wells. Natural gas as an EOR fluid is in the initial stages of being used broadly in the oil and gas industry and as such, many aspects of the process need to be researched and addressed prior to widespread acceptance. In addition, re-fracturing techniques, particularly using cemented liners also need to be further investigated. This project explores several of these EOR techniques in greater detail, not just at the theoretical level, but through actual field test sites. This report delves into the research program, identified tasks, several studies, observations, results, and conclusions under the Hydraulic Fracturing Test Site (HFTS) project. This test project is subdivided into three distinct phases and each phase is discussed in detail under separate sections. The original test site for Phase 1 as well as the Phase 2 site are in Midland Basin in Texas and operated by Laredo Petroleum. In the first two phases, the program targeted the Wolfcamp formation in Midland Basin. Phase 3 of the study targeted the EagleFord play in South Texas with Devon Energy as the operator. Significant conclusions from this study include: 1) lateral and vertical fracture growth mapping as well as proppant transport behavior, 2) Use of field gas and its applicability for huff n puff EOR injection in the Midland Basin, 3) Development and validation of proppant log, both at core scale as well as in-fill well implementation by analyzing drilling mud return samples, 4) Applicability of liner refracturing including best practices for enhanced unit level productivity. This report will detail all these studies as well as technical results and conclusions from said studies. These include general subsurface characterization work, completion designs as implemented, studies looking at fracture geometry, high resolution microseismic study, advanced crosswell strain mapping studies including drainage characterization, core characterization results, proppant analysis (core and observation wells), geochemistry, etc. to name a few.

02 PETROLEUM↗

Investigation and modeling of the degradation of Zr-based fuel claddings during corrosion in steam and air-steam mixtures at high temperatures - 6.3 STP-2016-0033

This paper presents the main results of a study conducted to quantify and to model the degradation state of Zr-based fuel claddings submitted to severe accident conditions in a nuclear reactor core: high temperatures and either pure steam or air-steam mixture. Due to the progressive thickening of a dense and protective ZrO{sub 2} layer, the oxidation kinetics of Zr-based claddings in steam at high temperatures typical of nuclear severe accidents, is generally cubic or parabolic. However, for some temperature domains, this oxide layer may crack, becoming porous and non-protective anymore. In these 'breakaway' conditions, the oxidation kinetics change from (sub-)parabolic to linear or even accelerated. Additionally, the temperature increase can lead core materials to melt and to relocate down to the vessel lower head, threatening its integrity. If it fails, and for specific conditions, air ingress may take place into the reactor. Hence, oxygen and nitrogen both react with Zr-based claddings, successively through oxidation of Zr (forming ZrO{sub 2} layer), nitriding of Zr (forming ZrN particles) and oxidation of ZrN (forming ZrO{sub 2} and releasing nitrogen). These self-sustained chemical reactions enhance the deterioration of Zr-based claddings and of their ZrO{sub 2} layers, inducing a rise of their open porosity. To quantify this porosity, a series of two-step experiments was conducted. First, Zirlo{sup TM} cladding samples were isothermally oxidized in various conditions: in pure steam or in 50- 50 mol% air-steam mix, at several temperatures, and for different durations. The main thermal effects on reaction kinetics and the high impact of air on the cladding degradation are all confirmed by experimental results. Second, pioneering porosimetry measurements by Hg intrusion were realized for the first time on such corroded cladding samples. In both atmospheres, it is pointed out that 1200 and 1250 K lead to particularly porous oxide layers, especially due to strong 'breakaway' effects. Moreover, it is confirmed that the presence of air strongly enhances the oxide cracking: cladding samples are more porous when oxidized in the air-steam mixture than under pure steam. Finally, it is observed that in all conditions, the open porous volume fraction of Zirlo{sup TM} claddings continuously rises during their corrosion process. Hence, for each experimental condition, porosity correlations are determined through linear regressions, and porosity increase rates are deduced by derivation versus time and validated against porosimetry results of cladding samples corroded in transient (nonisothermal) conditions. (authors)

36 MATERIALS SCIENCE↗

Investigation and modeling of the degradation of zirconium-based fuel cladding during corrosion in steam and air-steam mixtures at high temperatures - 2016-0033

This paper presents the main results of a study conducted to quantify and to model the degradation state of zirconium-based fuel claddings submitted to severe-accident conditions in a nuclear reactor core: high temperatures and either pure steam or an air-steam mixture. Due to the progressive thickening of a dense and protective ZrO{sub 2} layer, the oxidation kinetics of zirconium-based claddings in steam at high temperatures typical of severe nuclear accidents are generally cubic or parabolic. However, for some temperature domains, this oxide layer may crack, becoming porous and no longer protective. In these 'breakaway' conditions, the oxidation kinetics change from (sub)parabolic to linear or even accelerated. In addition, the temperature increase can lead core materials to melt and to relocate down to the vessel lower head, threatening its integrity. If it fails, and for specific conditions, air ingress may take place into the reactor. Hence, oxygen and nitrogen both react with zirconium-based claddings successively through the oxidation of zirconium (forming a ZrO{sub 2} layer), nitriding of zirconium (forming zirconium nitride particles), and the oxidation of zirconium nitride (forming ZrO{sub 2} and releasing nitrogen). These self-sustained chemical reactions enhance the deterioration of zirconium-based claddings and their ZrO{sub 2} layers, inducing an increase in their open porosity. To quantify this porosity, a series of two-step experiments was conducted. First, ZIRLO{sup TM} cladding samples were isothermally oxidized in pure steam or in a 50:50 mol% air-steam mixture at several different temperatures and durations. The main thermal effects on reaction kinetics and the high impact of air on the cladding degradation were all confirmed by experimental results. Second, pioneering porosimetry measurements by mercury intrusion were realized for the first time on such corroded cladding samples. In both atmospheres, it was pointed out that 1,200 and 1,250 K led to particularly porous oxide layers, especially due to strong breakaway effects. Moreover, we confirmed that the presence of air strongly enhances the oxide cracking: cladding samples were more porous when oxidized in the air-steam mixture than under pure steam. Finally, we observed that in all conditions, the open porous volume fraction of ZIRLO claddings continuously rose during their corrosion process. Hence, for each experimental condition, porosity correlations were determined through linear regressions, and porosity increase rates were deduced by derivation versus time and validated against porosimetry results of cladding samples corroded in transient nonisothermal) conditions. (authors)

36 MATERIALS SCIENCE↗

Final Scientific Report - Wireless and Sensing Solutions Advancing Industrial Efficiency

The project team's goal for the Wireless and Sensing Solution Advancing Industrial Efficiency award (DE-FC36-04GO14002) was to develop, demonstrate, and test a number of leading edge technologies that could enable the emergence of wireless sensor and sampling systems for the industrial market space. This effort combined initiatives in advanced sensor development, configurable sampling and deployment platforms, and robust wireless communications to address critical obstacles in enabling enhanced industrial efficiency.

99 GENERAL AND MISCELLANEOUS↗

Band-gap tuning and magnetic properties of heterovalent ions (Ba, Sr and Ca) substituted BiFeO{sub 3} nanoparticles

A Comparative study of heterovalent Ba, Sr and Ca ions substitution on the structural, vibrational, optical and magnetic properties of BiFeO{sub 3} nanoparticles was carried out. The distorted rhombohedral structure was confirmed from both X-ray diffraction and Raman spectroscopy techniques in pure BiFeO{sub 3} and Bi{sub 0.85}A{sub 0.15}FeO{sub 3} (A= Ba, Sr and Ca) samples. UV-Visible spectroscopy results show that the band-gap of BiFeO{sub 3} nanoparticles can be tuned by heterovalent ions substitution from 2.12 eV for BiFeO{sub 3} to 2.10, 2.06 and 2.03 eV for Ca, Sr and Ba substituted BiFeO{sub 3} nanoparticles respectively. The magnetic measurements indicate enhancement in magnetization for heterovalent A{sup 2+} substituted BiFeO{sub 3} samples and the magnetization increases with increase of ionic radius of the substituted ions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Static, mixed-array total evaporation for improved quantitation of plutonium minor isotopes in small samples

Actinide isotope measurements are a critical signature capability in the modern nuclear forensics “toolbox”, especially when interrogating anthropogenic constituents in real-world scenarios. Unfortunately, established methodologies, such as traditional total evaporation via thermal ionization mass spectrometry, struggle to confidently measure low abundance isotope ratios (<10 -6 ) within already limited quantities of sample. Herein, we investigate the application of static, mixed array total evaporation techniques as a straightforward means of improving plutonium minor isotope measurements, which have been resistant to enhancement in recent years because of elevated radiologic concerns. Furthermore, results are presented for small sample (~20 ng) applications involving a well-known plutonium isotope reference material, CRM-126a, and compared with traditional total evaporation methods.

07 ISOTOPE AND RADIATION SOURCES↗

Organically Modified Nanoclay and Aluminum Hydroxide Incorporated Bionanocomposites towards Enhancement of Physico-mechanical and Thermal Properties of Lignocellulosic Structural Reinforcement

A range of bio-nanocomposites were prepared by incorporation of organo modified montmorillonite nanoclay (OMMT) with or without use of aluminum hydroxide (Al(OH){sub 3}) within polylactic acid (PLA) solution. Furthermore, the solution was employed for modification of ligno-cellulosic (jute) fabric structural reinforcements. The successful incorporation of nanofillers within the host polymer, polylactic acid (PLA) was confirmed by Fourier-transform infrared spectroscopy (FT-IR). Water uptake and swelling behaviour studies revealed that the water uptake and swelling ratio of bio-composites reduced significantly as compared to pristine jute fabric, whereas upon incorporation of OMMT and Al(OH){sub 3}, the water barrier properties reduced even further in the developed bio-nanocomposites. The flexural strength of the bio-nanocomposites also showed improved mechanical and dimensional stability. Synergistic effects of OMMT and Al(OH){sub 3} were observed in enhancing the aforementioned physico-mechanical properties. Scanning electron microscopy (SEM) studies revealed microstructural details of developed samples. Similarly, the thermo-gravimetric analysis and linear burning rate studies of Al(OH){sub 3 }treated bio-nanocomposite materials revealed enhanced thermal resistance and reduced flammability respectively compared to both pristine woven jute fabric and fabrics treated with PLA alone or those without Al(OH){sub 3}. From the above results it can safely be said that the bio-nanocomposite material can be a prospective candidate for development of flame retardant biopackaging.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Observations and Modeling of the Green Ocean Amazon: Sounding Enhancement Field Campaign Report

The goal of this campaign was to provide higher temporal sampling of the vertical structure of the atmosphere during the two intensive observational periods (IOPs) of the GoAmazon 2014/15 campaign. The U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Climate Research Facility’s first ARM Mobile Facility (AMF1) baseline launches for 2014 and 2015 was 4 sondes/day at 2 am, 8 am, 2 pm, and 8 pm local time (LT) (6, 12, 18 and 0 Coordinated Universal Time [UTC]). However, rapid changes in boundary layer and free tropospheric temperature, humidity, and wind profiles happen throughout the diurnal cycle over Manaus, Brazil's complex forest canopy with resulting responses in aerosol, cloud, and precipitation characteristics. This campaign increased sampling to 5 sondes/day for the 2014 wet and dry season IOPs by adding a launch at 11 am (15 UTC) to capture rapid changes in boundary layer properties and convective cloud growth during that time. The extra launch also corresponded to the time of day the ARM Gulfstream (G-1) and German HALO aircraft most often flew, thus providing useful measurements of the large-scale environment during the flights. In addition, the extra launch will significantly add to the quality of AMF1 instrument retrievals and variational analysis forcing data set during the IOPs.

54 ENVIRONMENTAL SCIENCES↗

Effect of sputtered lanthanum hexaboride film thickness on field emission from metallic knife edge cathodes

We report experiments and analysis of field emission from metallic knife-edge cathodes, which are sputter-coated with thin films of lanthanum hexaboride (LaB{sub 6}), a low-work function material. The emission current is found to depend sensitively on the thickness of the LaB{sub 6} layer. We find that films thinner than 10 nm greatly enhance the emitted current. However, cathodes coated with a thicker layer of LaB{sub 6} are observed to emit less current than the uncoated metallic cathode. This result is unexpected due to the higher work function of the bare metal cathode. We show, based on numerical calculation of the electrostatic potential throughout the structure, that the external (LaB{sub 6}/vacuum) barrier is reduced with respect to uncoated samples for both thin and thick coatings. However, this behavior is not exhibited at the internal (metal/LaB{sub 6}) barrier. In thinly coated samples, electrons tunnel efficiently through both the internal and external barrier, resulting in current enhancement with respect to the uncoated case. In contrast, the thick internal barrier in thickly coated samples suppresses current below the value for uncoated samples in spite of the lowered external barrier. We argue that this coating thickness variation stems from a relatively low (no higher than 10{sup 18} cm{sup -3}) free carrier density in the sputtered polycrystalline LaB{sub 6}.

36 MATERIALS SCIENCE↗

Magnetic properties of Ce-Nd-Fe-Mo alloys and their nitrides

New quaternary alloys of Ce-1 xNdxFe12 Mo-y(y) with x=0, 0.2, 0.4, 0.6, 0.8, 1 and y=0, 1.5, 2 have been prepared and magnetically hardened by melt spinning. X-ray diffraction indicates that the as-spun materials exhibit the tetragonal ThMn12-type structure. Prior to nitriding, the coercivity H-ci is less than 0.6 kOe in all alloys and is independent of Nd content, while the magnetization 4 pi M-19 (measured in an applied held of 19 kOe) and Curie temperature T-c increase with added Nd content x. The effects of nitriding pressure P, time t, and temperature TOR magnetic properties have been carefully evaluated on NdFe10Mo2 in order to identify the optimal nitriding parameters. The optimized nitriding profile was subsequently adopted to nitride the remaining samples. After nitrogenation, T-c and 4 pi M-19 have been substantially enhanced primarily due to the increased Fe-Fe exchange from nitrogen induced lattice dilation. Benefitting from the positive contribution from Nd, H-ci has been greatly improved in the Nd containing samples. As a result, Ce0.2Nd0.8Fe10Mo2 nitride features H-ci=2.9 kOe and (BH)(max) = 1.6 MGOe and Ce0.2Nd0.8Fe10.5Mo1.5 nitride demonstrates H-ci=2.5 kOe, (BH)(max) = 1.5 MGOe at room temperature, and T-c=337 degrees C. which are substantial advancements compared to the pure Ce based ThMn12-type materials previously reported. (C) 2014 Published by Elsevier B.V.

Zhou, C↗

Improved strategies for DNP-enhanced 2D 1 H-X heteronuclear correlation spectroscopy of surfaces

We demonstrate that dynamic nuclear polarization (DNP)-enhanced 1 H-X heteronuclear correlation (HETCOR) measurements of hydrogen-rich surface species are better accomplished by using proton-free solvents. This approach notably prevents HETCOR spectra from being obfuscated by the solvent-derived signals otherwise present in DNP measurements. Additionally, in the hydrogen-rich materials studied here, which included functionalized mesoporous silica nanoparticles and metal organic frameworks, the use of proton-free solvents afforded higher sensitivity gains than the commonly used solvents containing protons. Here, we also explored the possibility of using a solvent-free sample formulation and the feasibility of indirect detection in DNP-enhanced HETCOR experiments.

36 MATERIALS SCIENCE↗

Development of an Enhanced Metaproteomic Approach for Deepening the Microbiome Characterization of the Human Infant Gut

The early-life microbiota establishment in the human infant gut is highly variable and plays a crucial role in host nutrients and immunity maturation. While high-performance mass spectrometry (MS)-based metaproteomics is a powerful method for the functional characterization of complex microbial communities, the construction of comprehensive metaproteomic information in human fecal samples is inhibited by the presence of abundant human proteins. To alleviate this restriction, we have designed a novel metaproteomic strategy based on Double Filtering (DF) to enhance microbial protein characterization in complex fecal samples from healthy premature infants. We improved the overall depth of infant gut proteome measurement, with an increase in the number of identified low abundance proteins, and observed greater than twofold improvement in metrics for microbial protein identifications and quantifications with a relatively high rank correlation to control. We further showed the substantial enhancement of this approach for extensively interpreting microbial functional categories between infants by affording more detailed and confident identified categories. This approach provided an avenue for in-depth measurement in the microbial component of infant fecal samples and thus comprehensive characterization of infant gut microbiome functionality.

60 APPLIED LIFE SCIENCES↗

Investigations on the Thermal Stability and Kinetics of Biolubricants Synthesized from Different Types of Vegetable Oils

Petroleum-based lubricants raise environmental concerns due to their non-biodegradability and toxicity, whereas biobased lubricants underperform owing to low thermal stability. This study examined and compared three vegetable oils, along with their chemically modified versions, to better understand their suitability as biolubricants. High oleic soybean oil (HOSOY), regular soybean oil (RSOY), and waste cooking oil (WCO) were subjected to chemical modification, where isopropyl groups were attached to the fatty acid chains of the oils to produce branched oils, i.e., b-HOSOY, b-RSOY, and b-WCO. The detailed kinetic study of each regular and modified sample was investigated using thermogravimetric analysis. The kinetic parameters, such as the activation energies, reaction rate, and pre-exponential factor, were generated via Friedman methods. The differential thermal gravimetric (DTG) analysis showed low volatilization at the onset temperature in each modified oil as compared with the unmodified samples under an oxidative environment. Furthermore, the comparative kinetic studies demonstrated the enhanced thermoxidative stability of the modified products relative to their unaltered counterparts. Among the tested oils, the b-RSOY showed an average activation energy of 325 kJ/mol, followed by the b-WCO: 300 kJ/mol and the b-HOSOY: 251 kJ/mol, indicating the most stable modified product under an oxidative environment. For all the samples, the pre-exponential factors were in good agreement with the activation energies, which validates that finding the pre-exponential components is crucial to the kinetic analysis.

Sarker, Majher I. (ORCID:0000000299509274)↗