Search NASA⌕ Search

SEARCH · Search NASA

Results for “Error Mitigation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Enhancing Coherence Limits in Superconducting Quantum Systems for Computing and Sensing

This talk will highlight recent efforts at the SQMS Center to develop qudit-based quantum computing architectures using superconducting three-dimensional (3D) cavities, as well as the use of these ultra-coherent cavities for quantum sensing. I will present systematic studies of materials and devices aimed at identifying and mitigating the dominant sources of decoherence—including two-level systems (TLS), quasiparticles, and other noise mechanisms—in both transmons and 3D cavities. These investigations include microwave loss characterization of niobium, tantalum, aluminum, their native oxides, and substrate materials such as silicon and sapphire. By combining measurements on qubits and cavities, we disentangle subsystem-specific loss mechanisms and establish a hierarchy of mitigation strategies, leading to transmon coherence times exceeding one millisecond. I will also discuss studies of quasiparticle dynamics, including quasiparticle bursts observed in qubits operated both above ground and at the Gran Sasso underground laboratory, and the observation that applied magnetic fields can suppress temporal T₁ fluctuations. Building on these advances, we demonstrate a record-coherence two-cell cavity-qudit system with coherence times exceeding 20 milliseconds. Leveraging tunable sideband interactions together with error-resilient protocols, including measurement-based error correction and post-selection, we achieve high-fidelity quantum state control, including the preparation of Fock states up to N=20 with fidelities above 95% and the generation of high-fidelity two-mode entangled states. Finally, I will discuss how these ultra-coherent quantum systems are enabling emerging quantum sensing applications, including searches for dark matter and gravitational waves.

Roy, Tanay [Fermilab] (ORCID:000000019442862X)↗

BeyondPlanck: I. Global Bayesian analysis of the Planck Low Frequency Instrument data

We describe the BEYONDPLANCK project in terms of our motivation, methodology, and main products, and provide a guide to a set of companion papers that describe each result in more detail. Building directly on experience from ESA’s Planck mission, we implemented a complete end-to-end Bayesian analysis framework for the Planck Low Frequency Instrument (LFI) observations. The primary product is a full joint posterior distribution P(ω | d), where ω represents the set of all free instrumental (gain, correlated noise, bandpass, etc.), astrophysical (synchrotron, free-free, thermal dust emission, etc.), and cosmological (cosmic microwave background – CMB – map, power spectrum, etc.) parameters. Some notable advantages of this approach compared to a traditional pipeline procedure are seamless end-to-end propagation of uncertainties; accurate modeling of both astrophysical and instrumental effects in the most natural basis for each uncertain quantity; optimized computational costs with little or no need for intermediate human interaction between various analysis steps; and a complete overview of the entire analysis process within one single framework. As a practical demonstration of this framework, we focus in particular on low-ℓ CMB polarization reconstruction with Planck LFI. In this process, we identify several important new effects that have not been accounted for in previous pipelines, including gain over-smoothing and time-variable and non-1/f correlated noise in the 30 and 44 GHz channels. Modeling and mitigating both previously known and newly discovered systematic effects, we find that all results are consistent with the ΛCDM model, and we constrained the reionization optical depth to τ = 0.066 ± 0.013, with a low-resolution CMB-based χ 2 probability to exceed of 32%. This uncertainty is about 30% larger than the official pipelines, arising from taking a more complete instrumental model into account. The marginal CMB solar dipole amplitude is 3362.7 ± 1.4 μK, where the error bar was derived directly from the posterior distribution without the need of any ad hoc instrumental corrections. We are currently not aware of any significant unmodeled systematic effects remaining in the Planck LFI data, and, for the first time, the 44 GHz channel is fully exploited in the current analysis. We argue that this framework can play a central role in the analysis of many current and future high-sensitivity CMB experiments, including LiteBIRD, and it will serve as the computational foundation of the emerging community-wide COSMOGLOBE effort, which aims to combine state-of-the-art radio, microwave, and submillimeter data sets into one global astrophysical model.

79 ASTRONOMY AND ASTROPHYSICS↗

Implementation of a Binary Neural Network on a Passive Array of Magnetic Tunnel Junctions

The increasing scale of neural networks and their growing application space have produced demand for more energy- and memory-efficient artificial-intelligence-specific hardware. Avenues to mitigate the main issue, the von Neumann bottleneck, include in-memory and near-memory architectures, as well as algorithmic approaches. In this report we leverage the low-power and the inherently binary operation of magnetic tunnel junctions (MTJs) to demonstrate neural network hardware inference based on passive arrays of MTJs. In general, transferring a trained network model to hardware for inference is confronted by degradation in performance due to device-to-device variations, write errors, parasitic resistance, and nonidealities in the substrate. To quantify the effect of these hardware realities, we benchmark 300 unique weight matrix solutions of a two-layer perceptron to classify the Wine dataset for both classification accuracy and write fidelity. Despite device imperfections, we achieve software-equivalent accuracy of up to 95.3% with proper tuning of network parameters in 15 x 15 MTJ arrays having a range of device sizes. The success of this tuning process shows that new metrics are needed to characterize the performance and quality of networks reproduced in mixed signal hardware.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Assessing the Viability of Using GEOS-Forecast Product for Landslides Forecasting: A Step Toward Early Warning System

Landslides across the globe are mostly triggered by extreme rainfall events affecting infrastructure, transportation and livelihoods. The risks are rarely quantified due to lack of data, analytical skills and limited modeling techniques. Knowledge of local to global scale landslide risks provides communities and national agencies the ability to adapt disaster management practices to mitigate and recover from these hazards. In order to minimize the risks and improve characterization of community resilience to landslides, it is vital to have reliable information about the factors triggering landslides such as rainfall, well ahead in time. Forecasting potential landslide activity and impacts can be achieved through reliable precipitation forecast models. However, it is challenging because of the temporal and spatial variability of precipitation, an important factor in triggering landslides. Evaluation of the precipitation field, associated errors, and sampling uncertainties is integral for development of efficient and reliable landslide forecasting and early warning system. This study develops a methodology to assess the viability of using a precipitation field provided by a global model and its potential integration in the landslide forecasting system. The study focuses on the comparison between the IMERG (Integrated Multi-satellitE Retrievals for Global Precipitation Mission) and GEOS (NASA Goddard Earth Observing System)-Forecast product over contiguous United States (CONUS). GEOS model assimilates new observations every 6 hours, at 00, 06, 12, and 18 UTC. The framework is tested on the GEOS-Forecast Model initialized at 00 UTC using daily IMERG early product as reference using both categorical and continuous statistics. The categorical statistics includes the probability of detection (POD), success ratio (SR), critical success index (CSI), and the hit bias. Continuous statistics such as correlation, normalized standard deviation, and root-mean-square error are also evaluated. Overall, GEOS-Forecast precipitation field over the analysis period (~1 year) show underestimation with respect to IMERG early for the daily accumulated rainfall. However, the probability distribution function and cumulative distribution function of both show similar patterns. In terms of correlations, POD, SR, CSI, hit bias, the performance varies with respect to the rainfall threshold used.

Sana Khan↗

Evaluation of the Linear Aerospike SR-71 Experiment (LASRE) Oxygen Sensor

The Linear Aerospike SR-71 Experiment (LASRE) was a propulsion flight experiment for advanced space vehicles such as the X-33 and reusable launch vehicle. A linear aerospike rocket engine was integrated into a semi-span of an X-33-like lifting body shape (model), and carried on top of an SR-71 aircraft at NASA Dryden Flight Research Center. Because no flight data existed for aerospike nozzles, the primary objective of the LASRE flight experiment was to evaluate flight effects on the engine performance over a range of altitudes and Mach numbers. Because it contained a large quantity of energy in the form of fuel, oxidizer, hypergolics, and gases at very high pressures, the LASRE propulsion system posed a major hazard for fire or explosion. Therefore, a propulsion-hazard mitigation system was created for LASRE that included a nitrogen purge system. Oxygen sensors were a critical part of the nitrogen purge system because they measured purge operation and effectiveness. Because the available oxygen sensors were not designed for flight testing, a laboratory study investigated oxygen-sensor characteristics and accuracy over a range of altitudes and oxygen concentrations. Laboratory test data made it possible to properly calibrate the sensors for flight. Such data also provided a more accurate error prediction than the manufacturer's specification. This predictive accuracy increased confidence in the sensor output during critical phases of the flight. This paper presents the findings of this laboratory test.

Ennix, Kimberly A.↗

Evaluation of the Linear Aerospike SR-71 Experiment (LASRE) Oxygen Sensor

The Linear Aerospike SR-71 Experiment (LASRE) was a propulsion flight experiment for advanced space vehicles such as the X-33 and reusable launch vehicle. A linear aerospike rocket engine was integrated into a semi-span of an X-33-like lifting body shape (model), and carried on top of an SR-71 aircraft at NASA Dryden Flight Research Center. Because no flight data existed for aerospike nozzles, the primary objective of the LASRE flight experiment was to evaluate flight effects on the engine performance over a range of altitudes and Mach numbers. Because it contained a large quantity of energy in the form of fuel, oxidizer, hypergolics, and gases at very high pressures, the LASRE propulsion system posed a major hazard for fire or explosion. Therefore, a propulsion-hazard mitigation system was created for LASRE that included a nitrogen purge system. Oxygen sensors were a critical part of the nitrogen purge system because they measured purge operation and effectiveness. Because the available oxygen sensors were not designed for flight testing, a laboratory study investigated oxygen-sensor characteristics and accuracy over a range of altitudes and oxygen concentrations. Laboratory test data made it possible to properly calibrate the sensors for flight. Such data also provided a more accurate error prediction than the manufacturer's specification. This predictive accuracy increased confidence in the sensor output during critical phases of the flight. This paper presents the findings of this laboratory test.

Ennix, Kimberly A.↗

Active Correction of Aberrations of Low-Quality Telescope Optics

A system of active optics that includes a wavefront sensor and a deformable mirror has been demonstrated to be an effective means of partly correcting wavefront aberrations introduced by fixed optics (lenses and mirrors) in telescopes. It is envisioned that after further development, active optics would be used to reduce wavefront aberrations of about one wave or less in telescopes having aperture diameters of the order of meters or tens of meters. Although this remaining amount of aberration would be considered excessive in scientific applications in which diffraction-limited performance is required, it would be acceptable for free-space optical- communication applications at wavelengths of the order of 1 m. To prevent misunderstanding, it is important to state the following: The technological discipline of active optics, in which the primary or secondary mirror of a telescope is directly and dynamically tilted, distorted, and/or otherwise varied to reduce wavefront aberrations, has existed for decades. The term active optics does not necessarily mean the same thing as does adaptive optics, even though active optics and adaptive optics are related. The term "adaptive optics" is often used to refer to wavefront correction at speeds characterized by frequencies ranging up to between hundreds of hertz and several kilohertz high enough to enable mitigation of adverse effects of fluctuations in atmospheric refraction upon propagation of light beams. The term active optics usually appears in reference to wavefront correction at significantly lower speeds, characterized by times ranging from about 1 second to as long as minutes. Hence, the novelty of the present development lies, not in the basic concept of active or adaptive optics, but in the envisioned application of active optics in conjunction with a deformable mirror to achieve acceptably small wavefront errors in free-space optical communication systems that include multi-meter-diameter telescope mirrors that are relatively inexpensive because their surface figures are characterized by errors as large as about 10 waves. Figure 1 schematically depicts the apparatus used in an experiment to demonstrate such an application on a reduced scale involving a 30-cm-diameter aperture.

Hemmati, Hamid↗

Adaptive, problem-tailored variational quantum eigensolver mitigates rough parameter landscapes and barren plateaus

Abstract Variational quantum eigensolvers (VQEs) represent a powerful class of hybrid quantum-classical algorithms for computing molecular energies. Various numerical issues exist for these methods, however, including barren plateaus and large numbers of local minima. In this work, we consider the Adaptive, Problem-Tailored Variational Quantum Eiegensolver (ADAPT-VQE) ansätze, and examine how they are impacted by these local minima. We find that while ADAPT-VQE does not remove local minima, the gradient-informed, one-operator-at-a-time circuit construction accomplishes two things: First, it provides an initialization strategy that can yield solutions with over an order of magnitude smaller error compared to random initialization, and which is applicable in situations where chemical intuition cannot help with initialization, i.e., when Hartree-Fock is a poor approximation to the ground state. Second, even if an ADAPT-VQE iteration converges to a local trap at one step, it can still “burrow” toward the exact solution by adding more operators, which preferentially deepens the occupied trap. This same mechanism helps highlight a surprising feature of ADAPT-VQE: It should not suffer optimization problems due to barren plateaus and random initialization. Even if such barren plateaus appear in the parameter landscape, our analysis suggests that ADAPT-VQE avoids such regions by design.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Physics Informed Neural Nets for Systems Health Management

To facilitate and solve the prediction problem, awareness of the current health state of the system is key, since it is necessary to perform condition-based predictions. To accurately predict the future state of any system, it is required to possess knowledge of its current health state and future operational conditions. Development in data-driven algorithms in regression of complex nonlinear functions and classification tasks have generated a growing interest in artificial intelligence for industrial applications. Complex multi-physics models as well as digital twins, once purely built on physics and corresponding simplified lumped parameter iterations, can now benefit from machine learning algorithms to mitigate the lack of understanding of some complex behavior. The research work presents application of physics-informed neural nets application to a representative electric powertrain for unmanned aerial vehicles. The model is composed of physics-derived and empirical equations, integrated with connected networks that are strategically placed within the model to substitute equations that are subject to large uncertainty. Polynomial fit driven by heuristics or empirical observations can be substituted by more flexible networks that can minimize the error between model predictions and observations without being restricted to a predefined functional form. This modeling strategy allows training of networks deep inside the model and unknown parameters in a single learning stage.

Physics Informed↗

A chemical kinetic analysis of knock propensity of methanol-to-gasoline fuel

Production of low carbon gasoline-like fuels such as methanol-to-gasoline (MTG) is a promising approach to achieve rapid greenhouse gas emission reduction of the transportation sector. Despite the fact that gasoline that meets the ASTM D4814 standard for automotive spark-ignition engine fuel can be readily produced from these processes, it is unclear how the composition of MTG may affect engine performance and emissions. Here, in this paper, a surrogate for an MTG is used to numerically study the effects of gasoline composition on knock propensity and on the sensitivity of knock to thermal and fuel stratification, to oxygen dilution and to nitric oxide from exhaust gas recirculation of residual gases. Simulations were performed in ANSYS CHEMKIN-PRO using a comprehensive chemical kinetic mechanism for gasoline surrogates, and results of the MTG surrogate were compared against those of a petroleum-based regular E10 gasoline, termed PACE-20. A premium-grade MTG fuel was also formulated by adding ethanol to the MTG surrogate, and results were compared against those of four premium-grade, gasoline-like fuels representative of future alternative gasoline formulations. Surrogates and mechanism were evaluated by comparison against experimental engine data, and the model showed high accuracy at stoichiometric conditions (mean absolute error of ignition timing equal to 1.46 crank angle degrees) but larger deviations at lean conditions (mean absolute error of ignition timing equal to 5.52 crank angle degrees). Despite the fact that the MTG surrogate has a RON 1.1 units higher than that of PACE-20, it may show higher knock propensity at medium temperature conditions due to a less intense NTC behavior. MTG autoignition was more temperature- and equivalence ratio-sensitive than that of PACE20, suggesting that MTG can benefit more from naturally-occurring thermal stratification or from induced fuel stratification of the end gas to mitigate knock intensity. The sensitivity of autoignition reactivity to oxygen dilution and to NO concentration was higher for MTG than for regular gasoline at medium loads, but the opposite trend was observed at high loads due to the effect of pressure on the low-temperature chemistry of regular gasoline. Approximately 14 % vol ethanol content was required to upgrade the octane rating of MTG from regular grade to premium grade. Adding 13.6 % vol ethanol made the fuel autoignition less sensitive to both oxygen dilution and NO content (ignition time varies approx. 17 % and 50 % less with oxygen dilution and NO addition, respectively, when adding ethanol at high engine loads).

02 PETROLEUM↗

Predicting weather impacts on corn production in a data-limited region using a transfer learning approach

The stability of food supply and prices may depend more on annual changes in yields from year-to-year variability in weather than on longer-term average changes from changing climatic conditions. However, the absence of high-quality data on crop yields at fine spatial resolutions in many regions of the world makes it challenging to statistically model their response to interannual variability in weather patterns. Therefore, there is a need for empirical methods that can project annual crop yield changes even in limited data regions. Here, we propose a transfer learning algorithm that uses high spatial resolution data from one region to project yields in another region with more limited data. The goal of our work is to understand what data types can be beneficial for transferring learning from a source region to a very different target region with more limited data. We utilize Long Short-Term Memory to develop a transfer learning model that is trained on historical county-level corn yield in the United States and predicts district-level corn yield variations in India. Even using smaller amounts of data in India, simulating a data-scarce region, we achieve an average root mean square error of 0.48 bu acre−1 in predicting interannual yield variations. Using Shapley values to interpret results, we explore the contribution of the different weather parameters to interannual yield variability and find a larger influence of precipitation-related variables. Our study demonstrates the usefulness of this method for transferring models of weather impacts on crop yields trained on a data-rich country to one with more limited data. It suggests the potential of applying the transfer learning model to mitigate the need for extensive raw data globally.

Vishwakarma, Srishti [ORNL] (ORCID:000000031674419↗

AutoEnRichness: A hybrid empirical and analytical approach for estimating the richness of galaxy clusters

ABSTRACT We introduce AutoEnRichness, a hybrid approach that combines empirical and analytical strategies to determine the richness of galaxy clusters (in the redshift range of 0.1 ≤ z ≤ 0.35) using photometry data from the Sloan Digital Sky Survey Data Release 16, where cluster richness can be used as a proxy for cluster mass. In order to reliably estimate cluster richness, it is vital that the background subtraction is as accurate as possible when distinguishing cluster and field galaxies to mitigate severe contamination. AutoEnRichness is comprised of a multistage machine learning algorithm that performs background subtraction of interloping field galaxies along the cluster line of sight and a conventional luminosity distribution fitting approach that estimates cluster richness based only on the number of galaxies within a magnitude range and search area. In this proof-of-concept study, we obtain a balanced accuracy of 83.20 per cent when distinguishing between cluster and field galaxies as well as a median absolute percentage error of 33.50 per cent between our estimated cluster richnesses and known cluster richnesses within r200. In the future, we aim for AutoEnRichness to be applied on upcoming large-scale optical surveys, such as the Legacy Survey of Space and Time and Euclid, to estimate the richness of a large sample of galaxy groups and clusters from across the halo mass function. This would advance our overall understanding of galaxy evolution within overdense environments as well as enable cosmological parameters to be further constrained.

79 ASTRONOMY AND ASTROPHYSICS↗

Adverse Events Involving Radiation Oncology Medical Devices: Comprehensive Analysis of US Food and Drug Administration Data, 1991 to 2015

Purpose: Radiation oncology relies on rapidly evolving technology and highly complex processes. The US Food and Drug Administration collects reports of adverse events related to medical devices. We sought to characterize all events involving radiation oncology devices (RODs) from the US Food and Drug Administration's postmarket surveillance Manufacturer and User Facility Device Experience (MAUDE) database, comparing these with non–radiation oncology devices. Methods and Materials: MAUDE data on RODs from 1991 to 2015 were sorted into 4 product categories (external beam, brachytherapy, planning systems, and simulation systems) and 5 device problem categories (software, mechanical, electrical, user error, and dose delivery impact). Outcomes included whether the device was evaluated by the manufacturer, adverse event type, remedial action, problem code, device age, and time since 510(k) approval. Descriptive statistics were performed with linear regression of time-series data. Results for RODs were compared with those for other devices by the Pearson χ{sup 2} test for categorical data and 2-sample Kolmogorov-Smirnov test for distributions. Results: There were 4234 ROD and 4,985,698 other device adverse event reports. Adverse event reports increased over time, and events involving RODs peaked in 2011. Most ROD reports involved external beam therapy (50.8%), followed by brachytherapy (24.9%) and treatment planning systems (21.6%). The top problem types were software (30.4%), mechanical (20.9%), and user error (20.4%). RODs differed significantly from other devices in each outcome (P<.001). RODs were more likely to be evaluated by the manufacturer after an event (46.9% vs 33.0%) but less likely to be recalled (10.5% vs 37.9%) (P<.001). Device age and time since 510(k) approval were shorter among RODs (P<.001). Conclusions: Compared with other devices, RODs may experience adverse events sooner after manufacture and market approval. Close postmarket surveillance, improved software design, and manufacturer–user training may help mitigate these events.

07 ISOTOPE AND RADIATION SOURCES↗

Data & model conditioning for multivariate systematic uncertainty in model calibration, validation, and extrapolation.

This paper discusses implications and appropriate treatment of systematic uncertainty in experiments and modeling. Systematic uncertainty exists when experimental conditions, and/or measurement bias errors, and/or bias contributed by post-processing the data, are constant over the set of experiments but the particular values of the conditions and/or biases are unknown to within some specified uncertainty. Systematic uncertainties in experiments do not automatically show up in the output data, unlike random uncertainty which is revealed when multiple experiments are performed. Therefore, the output data must be properly 'conditioned' to reflect important sources of systematic uncertainty in the experiments. In industrial scale experiments the systematic uncertainty in experimental conditions (especially boundary conditions) is often large enough that the inference error on how the experimental system maps inputs to outputs is often quite substantial. Any such inference error and uncertainty thereof also has implications in model validation and calibration/conditioning; ignoring systematic uncertainty in experiments can lead to 'Type X' error in these procedures. Apart from any considerations of modeling and simulation, reporting of uncertainty associated with experimental results should include the effects of any significant systematic uncertainties in the experiments. This paper describes and illustrates the treatment of multivariate systematic uncertainties of interval and/or probabilistic natures, and combined cases. The paper also outlines a practical and versatile 'real-space' framework and methodology within which experimental and modeling uncertainties (correlated and uncorrelated, systematic and random, aleatory and epistemic) are treated to mitigate risk in model validation, calibration/conditioning, hierarchical modeling, and extrapolative prediction.

97 MATHEMATICS AND COMPUTING↗

How Fast Can a Li-Ion Battery Be Charged? Determination of Limiting Fast Charging Conditions

Fast-charge protocols that prevent lithium plating are needed to extend the life span of lithium-ion batteries. Here, we describe a simple experimental method to estimate the minimum charging time below which it is simply impossible to avoid plating at a given temperature. We demonstrate that, by gauging and correcting the ohmic drop that is intrinsic to reference electrodes, the local potential at the anode surface can be reasonably approximated. This finer anode control enables the determination of the maximum average rate at which lithium deposition can be mitigated, establishing realistic boundaries that can inform the development of advanced charging protocols.

25 ENERGY STORAGE↗

Modeling high-efficiency extreme ultraviolet etched multilayer phase-shift masks

Achieving high-throughput extreme ultraviolet (EUV) patterning remains a major challenge due to low source power; phase-shift masks can help solve this challenge for dense features near the resolution limit by creating brighter images than traditional absorber masks when illuminated with the same source power. We explore applications of etched multilayer phase-shift masks for EUV lithography, both in the current-generation 0.33 NA and next-generation 0.55 NA systems. We derive analytic formulas for the thin-mask throughput gains, which are 2.42× for lines and spaces and 5.86× for contacts compared with an absorber mask with dipole and quadrupole illumination, respectively. Using rigorous finite-difference time-domain simulations, we quantify variations in these gains by pitch and orientation, finding 87% to 113% of the thin-mask value for lines and spaces and a 91% to 99% for contacts. We introduce an edge placement error metric, which accounts for CD errors, relative feature motion, and telecentricity errors, and use this metric both to optimize mask designs for individual features and to explore which features can be printed on the same mask. Furthermore, we find that although partial coherence shrinks the process window, at an achievable sigma of 0.2 we obtain a depth of focus of 340 nm and an exposure latitude of 39.2%, suggesting that partial coherence will not limit the feasibility of this technology. Finally, we show that many problems such as sensitivity to etch uniformity can be greatly mitigated using a central obscuration in the imaging pupil.

42 ENGINEERING↗

SU-F-18C-13: Low-Dose X-Ray CT Reconstruction Using a Hybrid First-Order Method

Purpose: To develop a novel reconstruction method for X-ray CT that can lead to accurate reconstruction at significantly reduced dose levels combining low X-ray incident intensity and few views of projection data. Methods: The noise nature of the projection data at low X-ray incident intensity was modeled and accounted by the weighted least-squares (WLS) criterion. The total variation (TV) penalty was used to mitigate artifacts caused by few views of data. The first order primal-dual (FOPD) algorithm was used to minimize TV in image domain, which avoided the difficulty of the non-smooth objective function. The TV penalized WLS reconstruction was achieved by alternated FOPD TV minimization and projection onto convex sets (POCS) for data fidelity constraints. The proposed FOPD-POCS method was evaluated using the FORBILD jaw phantom and the real cadaver head CT data. Results: The quantitative measures, root mean square error (RMSE) and contrast-to-noise ratio (CNR), demonstrate the superior denoising capability of WLS over LS-based TV iterative reconstruction. The improvement of RMSE (WLS vs. LS) is 15%∼21% and that of CNR is 17%∼72% when the incident counts per ray are ranged from 1×10{sup 5} to 1×10{sup 3}. In addition, the TV regularization can accurately reconstruct images from about 50 views of the jaw phantom. The FOPD-POCS reconstruction reveals more structural details and suffers fewer artifacts in both the phantom and real head images. The FOPD-POCS method also shows fast convergence at low X-ray incident intensity. Conclusion: The new hybrid FOPD-POCS method, based on TV penalized WLS, yields excellent image quality when the incident X-ray intensity is low and the projection views are limited. The reconstruction is computationally efficient since the FOPD minimization of TV is applied only in the image domain. The characteristics of FOPD-POCS can be exploited to significantly reduce radiation dose of X-ray CT without compromising accuracy for diagnosis or treatment planning.

60 APPLIED LIFE SCIENCES↗

Reliability-Aware Requirements Development for Autonomy Software

Autonomy is the ability of a system to make decisions and take actions in the presence of uncertainty. Validating autonomy, therefore, is a matter of validating that the system makes intelligent decisions even when there might be discrepancies between the observed and the expected state of the world as well as when the possible outcome of each of the possible courses of action is uncertain. During the requirements engineering phase, the functions, including those that are required to be autonomous and their expected behavior are specified. However, in the case of autonomous software system, it is challenging to specify all possible scenarios that the software may encounter. Additionally, since autonomous behaviors cannot always be fully predetermined, it is difficult to reason about their completeness and correctness. While these challenges are also faced with non-autonomous system, they are more prevalent for autonomous system due to their complexity and emergent behavior. Our efforts have been three-fold. On one hand, we have developed a goal-based method for requirements decomposition. We have embedded this approach into a higher-level systems engineering framework and then developed methods for decision and reliability analysis within this framework. And finally, we use simulation analysis to validate the more theoretical methods and provide a feedback mechanism. The decision analysis approach (DA) helps in identifying and mitigating the run-time risks, by bringing to the forefront the uncertainties, decisions, interactions, and other factors that may cause autonomous software to make erroneous decisions. The DA framework is used to quantify, for each decision that the software can make, failure risk due to uncertainties. The information about the key decisions and circumstances that can cause autonomous system to make incorrect decisions are used to generate test scenarios to be run in a simulator to ensure that the system can handle error-prone circumstances. The results or outcomes from decisions, based on the simulated scenarios, can then be leveraged to further gain insight of the assured system. We combine a goal-based approach with simulation analysis to facilitate requirements development for autonomous systems and further provide a method for run-time systems level reliability considerations during the autonomous software development process. The DA and the reliability analysis methods provide a formalism for the consideration of uncertainty in the run time decision-making process for autonomous software. This formalism considers the uncertainty involved in the outcome of different courses of action, in terms of performance and cost, as well as a method to consider the system level reliability implications. System level reliability considerations for autonomous software decision making contribute to the satisfaction of the system level goals over the lifecycle of a given mission. We demonstrate our approach using a hypothetical rover path planning example. The requirements for our rover simulator are based on existing literature about Mars rovers and lessons learned from real world observations at JPL. The specifics of the autonomy design for the Mars rovers, that have not been previously cleared for external release, are not used for our demonstrations.

Lindvall, Mikael↗