Search NASA⌕ Search

SEARCH · Search NASA

Results for “Experimental methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Photodetector timing research at Fermilab

We describe here the outlines of research undertaken by Fermilab into timing characteristics of photodetectors. We describe our experimental method and give benchtop results on the timing resolution of micro-channel plate photomultipliers (MCP-PMT) and silicon photomultipliers (SiPM). In addition, we describe results of various configurations of these detectors, along with quartz radiators, in particle test beams at Fermilab. Results for timing of scintillator light using the DRS4 high speed digitizer are also presented.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Electrical properties of CdS/Cu(In,Ga)Se 2 interface

We present an experimental method to measure and extract the interface density of states and fixed charge at the CdS/Cu(In,Ga)Se 2 (CIGS) interface using the capacitance-voltage technique applied to a metal-insulator-semiconductor structure. The density of interface states is on the order of 10 10 to 10 13 cm -2 eV -1 . The effective fixed charge at the interface is (7.8 +/- 0.3) x 10 11 cm -2 and due to positive charges. These electrical properties make the CdS/CIGS interface well passivated and to some extent resemble the SiN x /p-Si interface. We also measure the inversion strength (i.e., Fermi level at the interface) and capture cross-section of interface states from admittance spectroscopy. Inputting the above extracted parameters into the extended Shockley-Read-Hall recombination formulation by Eades and Swanson [J. Appl. Phys. 58, 4267 (1985)], we calculate the surface recombination velocity of mid-to-high 10 3 cm•s –1 , which agrees reasonably with temperature-intensity dependent recombination analysis.

14 SOLAR ENERGY↗

Benchmarking viromics: an in silico evaluation of metagenome-enabled estimates of viral community composition and diversity

Background: Viral metagenomics (viromics) is increasingly used to obtain uncultivated viral genomes, evaluate community diversity, and assess ecological hypotheses. While viromic experimental methods are relatively mature and widely accepted by the research community, robust bioinformatics standards remain to be established. Here we used in silico mock viral communities to evaluate the viromic sequence-to-ecological-inference pipeline, including (i) read pre-processing and metagenome assembly, (ii) thresholds applied to estimate viral relative abundances based on read mapping to assembled contigs, and (iii) normalization methods applied to the matrix of viral relative abundances for alpha and beta diversity estimates. Results: Tools specifically designed for metagenomes, specifically metaSPAdes, MEGAHIT, and IDBA-UD, were the most effective at assembling viromes. Read pre-processing, such as partitioning, had virtually no impact on assembly output, but may be useful when hardware is limited. Viral populations with 2–5 × coverage typically assembled well, whereas lesser coverage led to fragmented assembly. Strain heterogeneity within populations hampered assembly, especially when strains were closely related (average nucleotide identity, or ANI ≥97%) and when the most abundant strain represented <50% of the population. Viral community composition assessments based on read recruitment were generally accurate when the following thresholds for detection were applied: (i) ≥10 kb contig lengths to define populations, (ii) coverage defined from reads mapping at ≥90% identity, and (iii) ≥75% of contig length with ≥1 × coverage. Finally, although data are limited to the most abundant viruses in a community, alpha and beta diversity patterns were robustly estimated (±10%) when comparing samples of similar sequencing depth, but more divergent (up to 80%) when sequencing depth was uneven across the dataset. In the latter cases, the use of normalization methods specifically developed for metagenomes provided the best estimates. Conclusions: These simulations provide benchmarks for selecting analysis cut-offs and establish that an optimized sample-to-ecological-inference viromics pipeline is robust for making ecological inferences from natural viral communities. Continued development to better accessing RNA, rare, and/or diverse viral populations and improved reference viral genome availability will alleviate many of viromics remaining limitations.

59 BASIC BIOLOGICAL SCIENCES↗

Thermal radiation properties of solids at low temperatures

This paper provides introductory remarks for the symposium session on thermal ra­diation properties of solids in the range 0°-200° K. A qualitative description is given of that part of the theory that is unique to low temperatures, after which experimental methods appropriate to low temperatures and present applications of low temperature data are sketched.

SOLIDS↗

Lunar seismic exploration.

Seismic experimentation methods to be performed on moon, giving P and S wave travel time curves for models of lunar interior

SEISMIC WAVE↗

The extraction of accurate coordinates of images on photographic plates by means of a scanning type measuring machine

The Moire method experimental stress analysis is similar to a problem encountered in astrometry. It is necessary to extract accurate coordinates from images on photographic plates. The solution to the mutual problem found applicable to the field of experimental stress analysis is presented to outline the measurement problem. A discussion of the photo-reading device developed to make the measurements follows.

Ross, B. E.↗

Oxidation of vehicle components by photoproduced holes.

The oxidation by ZnO holes of vehicle components in thermal control coatings has been examined to develop experimental methods to study such reactions and to identify what components to avoid because of their instability when in the presence of u.v.-produced holes. Two methods were used that show consistent results. An electrochemical technique with a single crystal ZnO anode was used for quantitative comparisons, and electron spin resonance was used to study more practical powder/vehicle systems. Alcohols and dioxane were shown to be readily oxidized by ZnO holes, whereas acetonitrile, neopentane, and ethyl acetate were oxidation resistant. Some resistance to the photooxidation was provided by recombination centers.

Sancier, K. M.↗

Molecular beams in chemistry.

The molecular-beam technique is a means for producing isolated atoms or molecules within a narrow range of speed and solid angle. The phenomena studied with molecular beams can be classified as single-particle interactions, many-particle interactions, and two particle-interactions. The results of scattering experiments fall into two categories including collisions that do not result in atomic rearrangements and collisions that do. Experimental methods are discussed, giving attention to low-energy beams, high-energy beams, and intermediate-energy beams. Examples are presented to illustrate the information that can be obtained from elastic, inelastic, and reactive scattering.

Jordan, J. E.↗

Pressure effect on the sensitivity of quartz Bourdon tube gauges.

The sensitivity change for a commercial fused quartz Bourdon tube precision pressure gauge, due to a change in absolute pressure level, has been analytically computed and experimentally confirmed. The computed differential pressure error is 2.5% of full scale at a 100 atm absolute pressure level. The experimental method compared the fused quartz Bourdon tube gauge digital output to the results obtained from a nitrogen gas pressure system which had a high pressure, well-type mercury manometer as the differential pressure reference.

Szaniszlo, A. J.↗

Measurement of longitudinal relaxation times for spin-decoupled protons.

Description of an experimental method for the determination of the longitudinal relaxation time for spin-decoupled protons by a modified version of the saturation recovery technique reported by Van Geet and Hume (1965). The described method should facilitate relaxation studies of chemically shifted protons (or fluorines) and can be applied to more complicated spin systems with the aid of triple resonance and noise-decoupling techniques.

Gerace, M. J.↗

Thermal control and heat storage by melting and freezing. Space thermal control development

Current results of an experimental study of increasing phase change material thermal diffusivity by means of solid fillers are reported. Aluminum honeycomb appears to offer the best improvement of any of the fillers investigated to date. Details of the experimental method developed in the present study for rapidly determining thermal diffusivities with a precision of about 10 percent are also reported. Further concepts regarding phase change material thermal diffusivity enhancement and of phase change material operation are discussed.

Grodzka, P. G.↗

Mechanisms of deterioration of nutrients phase 1

Experimental methods are studied by which freeze-dried foods of improved quality are produced. Considered are: (1) Factors effecting the loss of butanol from frozen aqueous food solutions during storage; (2) a freeze-drying microscope system for observing solidification processes in organic mixtures and aqueous inorganic salt solutions; (3) browning of high quality freeze-dried foods with minimal organoleptic and nutritional detoriation; (4) retention of PVP-n-propanol in freeze-dried food models; and (5) effects of freezing rate and sucrose immersion on taste and texture of freeze-dried apple slices.

Karel, M.↗