Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fermi level”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Phonon anomalies and superconductivity in the Heusler compound YPd₂Sn

We have studied the structural and electronic properties of YPd₂Sn in the Heusler structure using a generalized gradient approximation of the density functional theory and the ab initio pseudopotential method. The electronic results indicate that the density of states at the Fermi level is primarily derived from Pd d states, which hybridize with Y d and Sn p states. Using our structural and electronic results, phonons and electron-phonon interactions have been studied by employing a linear response approach based on the density functional theory. Phonon anomalies have been observed for transverse acoustic branches along the [110] direction. This anomalous dispersion is merely a consequence of the strong coupling. By integrating the Eliashberg spectral function, the average electron-phonon coupling parameter is found to be λ=0.99. Using this value, the superconducting critical temperature is calculated to be 4.12 K, in good accordance with the recent experimental value of 4.7 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis of crumpled nanosheets of polymeric carbon nitride from melamine cyanurate

Polymeric carbon nitride was synthesized by pyrolysis in nitrogen flux at different temperatures between 450 and 700 °C using melamine cyanurate as a reagent and sulfuric acid as a catalyst. The obtained carbon nitride consisted of curled nanosheets (650 °C), and globular particles (700 °C) with formula C₆N₇NHNH₂. The reaction yield of the catalyzed reaction was around the 15% for the sample treated at 700 °C, in a tapped crucible. The optical band gap of the polymer obtained at 700 °C is around 2.9 eV. The gap to the Fermi level is around 2 eV, considerably above the half of the band gap (due to electrons trapped in the gap), indicating that the polymer is probably a n-type semiconductor. - Graphical abstract: Transition from amorphous to crystalline carbon nitride, which is composed of globular particles and is a n-type wide band semiconductor. Highlights: • We synthetized carbon nitride using melamine cyanurate. • The reaction of carbon nitride formation is catalyzed by sulfuric acid. • The carbon nitride obtained at 700 °C is composed of globular particles. • The material obtained at 700 °C is a n-type semiconductor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic and structural properties at the interface between iron-phthalocyanine and Cu(110)

Electronic structure and adsorption geometry of Iron-Phthalocyanine (FePc) adsorbed on Cu(110) were investigated by using ultraviolet photoelectron spectroscopy (UPS) and first-principles density functional theory (DFT) calculations. The emission features α, β, γ, and δ originating from the FePc molecules in UPS spectra are located at 3.42, 5.04, 7.36, and 10.28 eV below Fermi level. The feature α is mostly deriving from Fe 3d orbital with some contributions from C 2p orbital. A considerable charge transfer from the Cu substrate to the Fe 3d orbital occurs upon the adsorption of FePc molecules. The angle-resolved UPS measurements indicate that FePc molecules adopt lying-down configurations with their molecular plane nearly parallel to the Cu(110) substrate at monolayer stage. In combination with the DFT calculations, the adsorption structure is determined to be that FePc molecule adsorbs on the top site of Cu(110) with an angle of 45° between the lobes of FePc and the [11{sup ¯}0] azimuth of the substrate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic and magnetic properties of nonmetal atoms adsorbed ReS{sub 2} monolayers

The stable configurations and electronic and magnetic properties of nonmetal atoms (H, N, P, O, S, F, and Cl) adsorbed ReS{sub 2} monolayers have been investigated by first-principles calculations. It is found that H, O, S, F, and Cl prefer to occupy the peak sites of S atoms, while both N and P atoms favor the valley sites of S atoms. The ReS{sub 2} sheet exhibits a good adsorption capability to nonmetal atoms. The reconstruction of the surface is pronounced in N- and P-adsorbed ReS{sub 2} monolayers. In H-adsorbed case, the Fermi level is pulled into the conduction band, which results in the semiconductor-metal transition. The same magnetic moment of 1μ{sub B} is found in the N-, P-, F-, and Cl-adsorbed ReS{sub 2} monolayers, while the mechanisms of forming magnetic moment for N (P)- and F (Cl)-adsorbed cases are different. In addition, the spatial extensions of spin density in P-, F-, and Cl-adsorbed cases are larger than that in N-adsorbed case, which is more suitable to achieve long-range magnetic coupling interaction at low defect concentrations. Our results provide insight for achieving metal-free magnetism and a tunable band gap for various electronic and spintronic devices based on ReS{sub 2}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ternary CaCu{sub 4}P{sub 2}-type pnictides AAg{sub 4}Pn{sub 2} (A=Sr, Eu; Pn=As, Sb)

Four ternary pnictides AAg{sub 4}Pn{sub 2} (A=Sr, Eu; Pn=As, Sb) were prepared by reactions of the elements at 850 Degree-Sign C and their crystal structures were determined from single-crystal X-ray diffraction studies. These silver-containing pnictides AAg{sub 4}Pn{sub 2} adopt the trigonal CaCu{sub 4}P{sub 2}-type structure (Pearson symbol hR21, space group R3-bar m, Z=3; a=4.5555(6) A, c=24.041(3) A for SrAg{sub 4}As{sub 2}; a=4.5352(2) A, c=23.7221(11) A for EuAg{sub 4}As{sub 2}; a=4.7404(4) A, c=25.029(2) A for SrAg{sub 4}Sb{sub 2}; a=4.7239(3) A, c=24.689(2) A for EuAg{sub 4}Sb{sub 2}), which can be derived from the trigonal CaAl{sub 2}Si{sub 2}-type structure of the isoelectronic zinc-containing pnictides AZn{sub 2}Pn{sub 2} by insertion of additional Ag atoms into trigonal planar sites within [M{sub 2}Pn{sub 2}]{sup 2-} slabs built up of edge-sharing tetrahedra. Band structure calculations on SrAg{sub 4}As{sub 2} and SrAg{sub 4}Sb{sub 2} revealed that these charge-balanced Zintl phases actually exhibit no gap at the Fermi level and are predicted to be semimetals. - Graphical abstract: SrAg{sub 4}As{sub 2} and related pnictides adopt a CaCu{sub 4}P{sub 2}-type structure in which additional Ag atoms enter trigonal planar sites within slabs built from edge-sharing tetrahedra. Highlights: Black-Right-Pointing-Pointer AAg{sub 4}Pn{sub 2} are the first Ag-containing members of the CaCu{sub 4}P{sub 2}-type structure. Black-Right-Pointing-Pointer Ag atoms are stuffed in trigonal planar sites within CaAl{sub 2}Si{sub 2}-type slabs. Black-Right-Pointing-Pointer Ag-Ag bonding develops through attractive d{sup 10}-d{sup 10} interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Adsorption of Potassium on the MoS2(100) Surface: A First-Principles Investigation

Periodic density functional theory calculations were performed to investigate the interaction that potassium with the Mo and S edges of the MoS2(100) surface. Both neutral and cationic (+1) charged potassium-promoted systems at different sulfur coverages were considered. Our calculations indicate that the potassium atom readily donates its single 4s valence electron to the MoS2 structure for the neutral potassium-promoted system, and the neutral and cationic potassium-promoted systems demonstrate a similar adsorption behavior. Moreover, potassium changes the magnetic properties known to occur at the metallic edge surface, which have implications for electron spin dependent surface characterization methods (i.e., electron spin/paramagnetic spectroscopy). Potassium in both the neutral and cationic systems tends to maximize its interactions with the available sulfur atoms at the edge surface, preferring sites over four-fold S hollows on fully sulfided Mo and S edges and over the interstitial gap where two to four edge surface S atoms are available for coordination. As the potassium coverage increases, the adsorption energy per potassium atom, surface work function, and transfer of the K 4s electron to the MoS2(100) surface decreases, which is in line with an increased metallization of the potassium adlayer. The potassium adlayer tends to form chains along the interstitial with K-K distances ~1 Å, which is notably less than those of bulk bcc K metal (4.61 Å). Density of states for the potassium-saturated surface suggests enhanced involvement of broad K 3d states beginning just above the Fermi level. Potassium-promotion of MoS2(100) has implications for alcohol catalysis: increasing the surface basicity by increasing the electron charge of the surface, providing hydrogenation-promoting CO site, blocking edge surface that dissociate CO and lead to methanation, and limiting H2 dissociative adsorption to the edge surface and possibly inhibiting the H2 dissociative adsorption via s character electron repulsion. This research was performed in part using the Molecular Science Computing Facility in the William R. Wiley Environmental Molecular Sciences Laboratory, a U.S. Department of Energy (DOE) national scientific user facility located at the Pacific Northwest National Laboratory (PNNL). PNNL is operated by Battelle for DOE.

10 SYNTHETIC FUELS↗

Two charged states of hydrogen on the SrTiO{sub 3}(001) surface

The effects of hydrogen exposure on the electronic structure of two types of SrTiO{sub 3}(001) surfaces, oxygen-deficient (OD) and nearly-vacancy-free (NVF) surfaces, were investigated with ultraviolet photoemission spectroscopy and nuclear reaction analysis. Upon molecular hydrogen exposure to the OD surface which reveals in-gap states at 1.3 eV below the Fermi level, the in-gap state intensity was reduced to half the initial value at a hydrogen coverage of 0.9 ± 0.7 × 10{sup 14} cm{sup −2}. On the NVF surface which has no in-gap state, on the other hand, atomic-hydrogen exposure induced in-gap states, and the hydrogen saturation coverage was evaluated to be 3.1 ± 0.8 × 10{sup 14} cm{sup −2}. We argue that H is positively charged as H{sup ∼0.3+} on the NVF surface by being coordinated to the O atom, whereas H is negatively charged as H{sup −} on the OD surface by occupying the oxygen vacancy site. The stability of H{sup −} at the oxygen vacancy site is discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Suppression of electron magnetotunneling between parallel two-dimensional GaAs/InAs electron systems by the correlation interaction

Magnetotunneling between two-dimensional GaAs/InAs electron systems in vertical resonant tunneling GaAs/InAs/AlAs heterostructures is studied. A new-type of singularity in the tunneling density of states, specifically a dip at the Fermi level, is found; this feature is drastically different from that observed previously for the case of tunneling between two-dimensional GaAs tunnel systems in terms of both the kind of functional dependence and the energy and temperature parameters. As before, this effect manifests itself in the suppression of resonant tunneling in a narrow range near zero bias voltage in a high magnetic field parallel to the current direction. Magnetic-field and temperature dependences of the effect's parameters are obtained; these dependences are compared with available theoretical and experimental data. The observed effect can be caused by a high degree of disorder in two-dimensional correlated electron systems as a result of the introduction of structurally imperfect strained InAs layers.

36 MATERIALS SCIENCE↗

Antisites in III-V semiconductors: Density functional theory calculations

Density functional based simulation, corrected for finite size effects, is used to investigate systematically the formation of antisite defects in III-V semiconductors (III = Al, Ga, and In and V = P, As, and Sb). Different charge states are modelled as a function of the Fermi level and under different growth conditions. The formation energies of group III antisites (III{sub V}{sup q}) decrease with increasing covalent radius of the group V atom though not group III radius, whereas group V antisites (V{sub III}{sup q}) show a consistent decrease in formation energies with increase in group III and group V covalent radii. In general, III{sub V}{sup q} defects dominate under III-rich conditions and V{sub III}{sup q} under V-rich conditions. Comparison with equivalent vacancy formation energy simulations shows that while antisite concentrations are always dominant under stoichiometric conditions, modest variation in growth or doping conditions can lead to a significantly higher concentration of vacancies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrostatically transparent graphene quantum-dot trap layers for efficient nonvolatile memory

In this study, we have demonstrated nonvolatile memory devices using graphene quantum-dots (GQDs) trap layers with indium zinc oxide (IZO) semiconductor channel. The Fermi-level of GQD was effectively modulated by tunneling electrons near the Dirac point because of limited density of states and weak electrostatic screening in monolayer graphene. As a result, large gate modulation was driven in IZO channel to achieve a subthreshold swing of 5.21 V/dec (300 nm SiO{sub 2} gate insulator), while Au quantum-dots memory shows 15.52 V/dec because of strong electrostatic screening in metal quantum-dots. Together, discrete charge traps of GQDs enable stable performance in the endurance test beyond 800 cycles of programming and erasing. Our study suggests the exciting potential of GQD trap layers to be used for a highly promising material in non-volatile memory devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Bismuth alloying properties in GaAs nanowires

First-principles calculations have been performed to investigate the structural, electronic and optical properties of bismuth alloying in GaAs nanowires. A typical model of Ga{sub 31}As{sub 31} nanowires is introduced for its reasonable band gap. The band gap of GaAs{sub 1−x}Bi{sub x} shrinks clearly with the increasing Bi concentration and the band edge shifts when spin–orbit coupling (SOC) is considered. The insertion of Bi atom leads to hybridization of Ga/As/Bi p states which contributes a lot around Fermi level. Scissor effect is involved. The optical properties are presented, including dielectric function, optical absorption spectra and reflectivity, which are also varied with the increasing of Bi concentrations. - Graphical abstract: Top view of Bi-doped GaAs nanowires. Ga, As, and Bi atoms are denoted with grey, purple and red balls, respectively. Display Omitted - Highlights: • A typical model of Ga{sub 31}As{sub 31} nanowires is introduced for its reasonable band gap. • The band gap of GaAs{sub 1−x}Bi{sub x} shrinks clearly with the increasing Bi concentration. • The band edge shifts when spin–orbit coupling (SOC) is considered. • The insertion of Bi atom leads to hybridization of Ga/As/Bi p states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of lateral size and thickness on the electronic structure and optical properties of quasi two-dimensional CdSe and CdS nanoplatelets

The effect of lateral size and vertical thickness of CdSe and CdS nanoplatelets (NPLs) on their electronic structure and optical properties are investigated using an effective-mass envelope function theory based on the 8-band k ⋅ p model with valence force field considerations. Volumetrically larger NPLs have lower photon emission energy due to limited quantum confinement, but a greater transition matrix element (TME) due to larger electron-hole wavefunction overlap. The optical gain characteristics depend on several factors such as TME, Fermi factor, carrier density, NPL dimensions, material composition, and dephasing rate. There is a red shift in the peak position, more so with an increase in thickness than lateral size. For an increasing carrier density, the gain spectrum undergoes a slight blue shift due to band filling effect. For a fixed carrier density, the Fermi factor is higher for volumetrically larger NPLs and so is the difference between the quasi-Fermi level separation and the effective bandgap. The transparency injection carrier density (and thus input current density threshold) is dimension dependent and falls for volumetrically larger NPLs, as they can attain the requisite exciton count for transparency with a relatively lower density. Between CdSe and CdS, CdSe has lower emission energy due to smaller bandgap, but a higher TME due to lower effective mass. CdS, however, has a higher so hole contribution due to a lower spin-orbit splitting energy. Both CdSe and CdS NPLs are suitable candidates for short-wavelength LEDs and lasers in the visible spectrum, but CdSe is expected to exhibit better optical performance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of Deep Centers on Charge-Carrier Confinement in InGaN/GaN Quantum Wells and on LED Efficiency

The deep-center-assisted tunneling of carriers in p–n structures of light-emitting diodes (LEDs) with InGaN/GaN quantum wells (QWs) makes smaller the effective height of the injection barrier, but leads to a dependence of the radiation efficiency on the density and energy spectrum of defects in GaN. In the case of hopping conduction across the space charge region, the forward voltage mainly drops near the QW boundary, where the density of deep states at the quasi Fermi-level is the lowest. As a result, band bending at the boundary decreases, and, with increasing current, the direction of the electric field also changes, which leads to a weaker confinement of holes, to their non-radiative recombination in the n barrier, and to an efficiency droop. The low efficiency of green GaN LEDs is associated with the dominance of deep centers and insufficient density of shallow centers in the energy spectrum of defects in barrier layers near the boundaries with the QW. The proposed model is confirmed by the stepwise experimental dependences of the current, capacitance and efficiency of green and blue LEDs in the case of forward bias, which reflect the contribution of color centers responsible for the defect photoluminescence bands in GaN.

36 MATERIALS SCIENCE↗

Hubbard physics in the PAW GW approximation

It is demonstrated that the signatures of the Hubbard Model in the strongly interacting regime can be simulated by modifying the screening in the limit of zero wavevector in Projector-Augmented Wave GW calculations for systems without significant nesting. This modification, when applied to the Mott insulator CuO, results in the opening of the Mott gap by the splitting of states at the Fermi level into upper and lower Hubbard bands, and exhibits a giant transfer of spectral weight upon electron doping. The method is also employed to clearly illustrate that the M{sub 1} and M{sub 2} forms of vanadium dioxide are fundamentally different types of insulator. Standard GW calculations are sufficient to open a gap in M{sub 1} VO{sub 2}, which arise from the Peierls pairing filling the valence band, creating homopolar bonds. The valence band wavefunctions are stabilized with respect to the conduction band, reducing polarizability and pushing the conduction band eigenvalues to higher energy. The M{sub 2} structure, however, opens a gap from strong on-site interactions; it is a Mott insulator.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microscopic mechanism of electron transfer through the hydrogen bonds between carboxylated alkanethiol molecules connected to gold electrodes

The atomic structure and the electron transfer properties of hydrogen bonds formed between two carboxylated alkanethiol molecules connected to gold electrodes are investigated by employing the non-equilibrium Green's function formalism combined with density functional theory. Three types of molecular junctions are constructed, in which one carboxyl alkanethiol molecule contains two methylene, –CH{sub 2}, groups and the other one is composed of one, two, or three –CH{sub 2} groups. Our calculations show that, similarly to the cases of isolated carboxylic acid dimers, in these molecular junctions the two carboxyl, –COOH, groups form two H-bonds resulting in a cyclic structure. When self-interaction corrections are explicitly considered, the calculated transmission coefficients of these three H-bonded molecular junctions at the Fermi level are in good agreement with the experimental values. The analysis of the projected density of states confirms that the covalent Au–S bonds localized at the molecule-electrode interfaces and the electronic coupling between –COOH and S dominate the low-bias junction conductance. Following the increase of the number of the –CH{sub 2} groups, the coupling between –COOH and S decreases deeply. As a result, the junction conductance decays rapidly as the length of the H-bonded molecules increases. These findings not only provide an explanation to the observed distance dependence of the electron transfer properties of H-bonds, but also help the design of molecular devices constructed through H-bonds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding ERE and iVOC Metrics for Graded CdSeTe Absorbers

PL-based external radiative efficiency (ERE) and implied open-circuit voltage (iVOC) metrics were introduced for thin-film solar absorbers to better understand the voltage deficit and diagnose losses in solar cells. Traditionally, elevated ERE and iVOC measurements are associated with diminished recombination within the solar device, a rationale heavily reliant on the assumption of a uniform bandgap and high carrier mobilities in the absorber. Recently, very low mobilities in CdSeTe absorbers (< 1 cm2/(V.s)) were measured using the light-induced transient grading technique. In this study, we use a detailed numerical model of iVOC to investigate the possible reasons of elevated iVOC in realistic CdSeTe absorbers with a graded Se profile. In particular, we examine how the bandgap nonuniformity and the reduced hole mobility in graded CdSeTe absorbers affect iVOC measurements. We show that high iVOC may result from inflated quasi-Fermi level splitting in the high-Se region in the front part of a CdSeTe absorber with slow hole transport. We reproduce the experimentally reported 360 mV increase in iVOC-VOC gap with reduced doping using a model with sub-1 cm2/(V.s) hole mobility in the high-Se region. Based on our results, we conclude that the iVOC metric (or ERE metric) should not be used as a sole metric of CdSeTe absorber quality. We discuss possible ways to extract useful information from the iVOC-VOC gap by supplementing the front-side illumination measurements with back-side illumination measurements.

14 SOLAR ENERGY↗