Search NASA⌕ Search

SEARCH · Search NASA

Results for “High Temperature Methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Application of Combined Sustained and Cyclic Loading Test Results to Alloy 617 Elevated Temperature Design Criteria

Alloy 617 is a reference structural material for very high temperature components of advanced-gas cooled reactors with outlet temperatures in the range of 900-950°C . In order for designers to be able to use Alloy 617 for these high temperature components, Alloy 617 has to be approved for use in Section III (the nuclear section) of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code. A plan has been developed to submit a draft code for Alloy 617 to ASME Section III by 2015. However, the current rules in Subsection NH for the evaluation of strain limits and creep-fatigue damage using simplified methods based on elastic analysis have been deemed inappropriate for Alloy 617 at temperatures above 1200°F (650°C). The rationale for this exclusion is that at higher temperatures it is not feasible to decouple plasticity and creep deformation, which is the basis for the current simplified rules. This temperature, 1200 °F, is well below the temperature range of interest for this material in High Temperature Gas Cooled Reactor (HTGR) applications. The only current alternative is, thus, a full inelastic analysis which requires sophisticated material models which have been formulated but not yet verified. To address this issue, proposed code rules have been developed which are based on the use of elastic-perfectly plastic (EPP) analysis methods and which are expected to be applicable to very high temperatures.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Detection of velocity in high temperature liquid metals

Various efforts have been made to measure velocity in liquid metals. All of these efforts, however, share the same inherent limitation, namely, not being operative at the high temperatures required by liquid metals and liquid slags in an industrial application. In this paper, the current methods used were reviewed, and a new technique was presented for the measurement of velocity in high temperature liquid metals. In using this technique there are two stages. Starting with the calibration stage and then moving to the actual measurement stage by making use of the data obtained from calibration stage. Calibration proceeds in the following manner. Metallic spheres moving with a specific velocity are immersed in liquid metal held under isothermal conditions and at specific temperature. Their melting times are determined very accurately with a novel technique. These measurements are repeated for different metal bath temperatures and for different velocities of metallic spheres. In this manner it is possible to calculate the correlation between velocity and melting times for each metal bath temperature. During the actual measurement stage, when the metal bath temperature is known and its velocity is unknown, the magnitude of the unknown liquid metal velocity can be derived as follows: metallic spheres are immersed into the moving liquid metal and their melting times are determined. Using the above mentioned correlations, it will be shown that the magnitude of the unknown velocity in liquid metal can be deduced. This new technique was applied to high temperature liquid aluminum and liquid steel and these results were presented. The potential applicability of this technique in other liquid metals and liquid slags will also be discussed.

Mikrovas, A. C.↗

Report on FY15 Two-Bar Thermal Ratcheting Test Results

Alloy 617 is a reference structural material for very high temperature components of advanced-gas cooled reactors with outlet temperatures in the range of 900-950°C. In order for designers to be able to use Alloy 617 for these high temperature components, Alloy 617 has to be approved for use in Section III (the nuclear section) of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code. A plan has been developed to submit a draft code for Alloy 617 to ASME Section III by 2015. However, the current rules in Subsection NH* for the evaluation of strain limits and creep-fatigue damage using simplified methods based on elastic analysis have been deemed inappropriate for Alloy 617 at temperatures above 1200°F(650°C). The rationale for this exclusion is that at higher temperatures it is not feasible to decouple plasticity and creep deformation, which is the basis for the current simplified rules. This temperature, 1200°F(650°C), is well below the temperature range of interest for this material in High Temperature Gas Cooled Reactor (HTGR) applications. The only current alternative is, thus, a full inelastic analysis which requires sophisticated material models which have been formulated but not yet verified. To address this issue, proposed code rules have been developed which are based on the use of elastic-perfectly plastic (EPP) analysis methods and which are expected to be applicable to very high temperatures. These newly proposed rules also address a long-term objective to provide an option for more simple, comprehensive and easily applied rules than the current so called “simplified” rules.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

WECC Variable Generation Planning Reference Book: Appendices

The document titled “WECC Variable Generation Planning Reference Book”. This book is divided into two volumes; one is the main document (volume 1)and the other is appendices (volume 2). The main document is a collection of the best practices and the information regarding the application and impact of variables generation on power system planning. This volume (appendices) has additional information on the following topics: Probabilistic load flow problems. 2. Additional useful indices. 3. high-impact low-frequency (HILF) events. 4. Examples of wide-area nomograms. 5. Transmission line ratings, types of dynamic rating methods. 6. Relative costs per MW-km of different electric power transmission technologies. 7. Ultra-high voltage (UHV) transmission. 8.High voltage direct current (VSC-HVDC). 9. HVDC. 10. Rewiring of existing transmission lines. 11. High-temperature low sag (HTLS) conductors. 12. The direct method and energy functions for transient stability analysis in power systems. 13.Blackouts caused by voltage instability. 14. Algorithm for parameter continuation predictor-corrector methods. 15. Approximation techniques available for security regions. 16. Impacts of wind power on power system small signals stability. 17. FIDVR. 18. FACTS. 19. European planning standard and practices. 20. International experience in wind and solar energy sources. 21. Western Renewable Energy Zones (WREZ). 22. various energy storage technologies. 23. demand response. 24. BA consolidation and cooperation options. 25. generator power management requirements and 26. European planning guidelines.

Makarov, Yuri V.↗

Effects of Annealing Temperature and Compaction Pressure on Magnetic Properties of Fe–Si Powder Cores Fabricated by an Improved Bluing Method

Fe-6.5wt%Si soft magnetic powder cores were prepared by using an improved bluing insulation method. A high-quality oxide insulation layer with good temperature stability was found to distribute continuously in the intervals between the Fe–Si particles. The effects of the annealing temperature and the compaction pressure on the core’s magnetic properties were investigated in detail. It was found that high temperature and low compaction pressure are beneficial to decrease the core’s inner stress and high compaction pressure is helpful to reduce the air gap. All the variations of the magnetic performance for the powder cores discussed in this paper were explained reasonably by considering these two factors. From the point of view of low loss, 760 °C and 2090 MPa were confirmed to be the relatively best annealing temperature and compaction pressure, respectively. The μ{sub e}, the % μ{sub e} at 100 Oe, and the loss at 50 kHz/1000 Gs for the core prepared under these two conditions are 63.57, 72.82%, and 547.66 mW/cm{sup 3}, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Processable high temperature resistant polymer matrix materials

A review is presented of studies conducted with addition-cured polyimides, giving particular attention to an improved method involving in situ polymerization of monomer reactants (PMR) on the surface of the reinforcing fibers. The studies show that the PMR approach provides a powerful method for fabricating high performance polymer matrix composites. Significant advantages of the PMR approach are related to the superior high temperature properties of the obtained material, lower cost, greater safety, and processing versatility.

Serafini, T. T.↗

High temperature thermochemical energy storage system

A thermochemical energy storage system and method of storing thermal energy are disclosed. The energy storing system described herein comprises a reactor comprising a CO2 sorbent comprising i) CaO and mayenite or ii) Li4SiO4, or a combination thereof, and b) a CO2 source, wherein the CO2 source is in fluid communication with the reactor to allow flow of CO2 between the CO2 source and the reactor. Further, methods are disclosed for storing thermal energy through a wide temperature range.

Melsert, Ryan↗

High temperature thermochemical energy storage system

A thermochemical energy storage system and method of storing thermal energy are described. The energy storing system described herein comprises a reactor comprising: a) a reactor with a CO 2 sorbent including MgO; and b) a supercritical CO 2 source with supercritical CO 2 and H 2 O, wherein the supercritical CO 2 source is in fluid communication with the reactor and the CO 2 sorbent including MgO to allow flow of the supercritical CO 2 and H 2 O between the supercritical CO 2 source and the reactor, thereby allowing contact of CO 2 with the CO 2 sorbent comprising MgO.

Muto, Andrew Jerome↗

Experimental Assessment of High Heating Rates in Induction Heating with Temperature-Sensitive Lacquers

The fast evolving temperature fields at the surface of induction-heated parts were measured by a contactless, optical method based on temperature-sensitive lacquers recorded with a high-speed imaging system. The positions of specific isotherms over time were precisely measured by image analysis. A 4340 steel cylinder and two spur gears of the same material were investigated. One spur gear was treated at high frequency, and the other one at simultaneous dual frequency. In both cases, the temperature started to rise at the root of the teeth and then expanded along the flanks. The heating rates were higher at the tips than at the roots for both treatments, with higher values for the dual-frequency treatment. The layer of transformed material was similar for both treatments, but the transformation temperature varied greatly. It was found to be 50-100 °C higher than the equilibrium values, depending on the local heating rate.

36 MATERIALS SCIENCE↗

Efficient Low-Temperature Direct Lithium Extraction from Chloride Brines Enabled by High-Capacity Sorbent

The demand for lithium, a key component in rechargeable batteries for electric vehicles and renewable energy storage systems, has surged in recent years. Meeting this demand requires efficient extraction methods that are both environmentally friendly and economically viable. This study investigates the utilization of the high-capacity sorbent amorphous aluminum hydroxide for enabling efficient direct lithium extraction at low temperatures. Traditional extraction methods often involve acid-leaching and energy-intensive processes that are not only expensive but also environmentally taxing. In contrast, our approach leverages the exceptional sorption properties of amorphous aluminum hydroxide to facilitate lithium extraction directly from brine, achieving extraction efficiencies of 94.4% in case 1 and 96.2% in case 2 at low temperatures. Kinetic modeling using the Avrami–Erofe’ev framework reveals a nucleation-growth mechanism ( n = 0.71, k = 0.131 h –1 ), providing quantitative insights into the solid-state phase transformation process. This method significantly reduces energy consumption and minimizes the environmental footprint. Through systematic experimentation and optimization, we demonstrate the effectiveness and scalability of our approach, highlighting its potential to revolutionize lithium extraction processes. Our findings highlight the potential of high-capacity sorbents, particularly amorphous aluminum hydroxide toward sustainable lithium production, contributing to the advancement of clean-energy technologies.

anions↗

Localization of toroidal motion and shear heating in 3-D high Rayleigh number convection with temperature-dependent viscosity

We have applied spectral-transform methods to study three-dimensional thermal convection with temperature-dependent viscosity. The viscosity varies exponentially with the form exp(-BT), where B controls the viscosity contrast and T is temperature. Solutions for high Rayleigh numbers, up to an effective Ra of 6.25 x 10(exp 6), have been obtained for an aspect-ratio of 5x5x1 and a viscosity contrast of 25. Solutions show the localization of toroidal velocity fields with increasing vigor of convection to a coherent network of shear-zones. Viscous dissipation increases with Rayleigh number and is particularly strong in regions of convergent flows and shear deformation. A time-varying depth-dependent mean-flow is generated because of the correlation between laterally varying viscosity and velocity gradients.

Balachandar, S.↗

Perspective on solid-phase epitaxy as a method for searching novel topological phases in pyrochlore iridate thin films

Pyrochlore iridates exhibit various novel topological phenomena due to their topology and electron correlation. Notably, pyrochlore iridate was the first proposed material system shown to host the time-reversal symmetry broken Weyl semimetal phase. After this profound theoretical proposal, extensive experimental attempts have been made to synthesize high-quality samples in both bulk and film forms. In particular, adjusting thin film geometry represents a practical way to tune the U/ t ( U: Coulomb interaction and t: for hopping parameter) and identify the various topological phases in the regime U ~ λ ( λ: spin–orbit interaction). However, the instability of pyrochlore iridates at high temperature and low oxygen pressure has long been a barrier to growing pyrochlore iridate thin films by conventional film growth methods. To overcome this, pyrochlore iridate films have often been grown by the solid-phase epitaxy method, which uses a metastable amorphous layer grown at low temperature. During a high temperature post-annealing process, the layer in contact with a single crystalline substrate will crystallize epitaxially in the solid state by rearranging atoms at the interface. Here, we present a perspective on the solid-phase epitaxy as a method to synthesize epitaxial pyrochlore iridate thin films and a way to search for novel correlated phenomena.

36 MATERIALS SCIENCE↗

Analysis of a Lunar Base Electrostatic Radiation Shield Concept

Space weather can be defined as the total ensemble of radiation in space, as well as on the surface of moons and asteroids. It consists of electromagnetic, charged-particle, and neutral particle radiation. The fundamental goal behind this NIAC Phase I research is to investigate methods of generating a static electric-field potential phi(x, y, z) in the volume above and around a "safe" or protected area on the lunar surface so that trajectories of harmful charged particle radiation are modified (deflected or reflected), thus creating a shadow over that region. Since the charged particles are not neutralized but merely redirected, there will be areas outside of the shadowed protected region that will have a higher flux concentration of radiation. One of the fundamental limitations of the static electric (electrostatic)-field approach to radiation shielding is that complete shadowing is accomplished only by complete reflection, which can only occur for shield voltages greater than or equal to the kinetic energy (in electron volts) of the incoming charged particles. Just as habitats on Earth are protected from severe weather events and conditions, such as extreme temperatures, high winds, and UV radiation, using multiple methods of shielding protection from severe space weather will undoubtedly require multiple strategies. The electrostatic shield concept may be one of many methods employed to protect astronaut habitats on the lunar surface from some of the harmful effects of space weather.

Buhler, Charles R.↗

Seismoacoustic Monitoring of Pyroprocessing Equipment

With the projected increase in world nuclear capacity comes the hurdle of spent nuclear fuel. Pyroprocessing is one method to process irradiated fuel by using high temperatures and electrochemical steps to separate radioactive components. High temperatures, high radiation levels, and equipment confined to a heavily shielded hot cell are a few of the challenges introduced regarding safeguards for pyroprocessing. The first stage of the process utilizes an element chopper to cut irradiated fuel into smaller pieces, offering the potential to identify equipment operation through seismoacoustic monitoring. Eleven seismic and infrasound sensors were deployed at various locations and distances near a pyroprocessing hot cell to evaluate signals emitted from the chopper. Signals were processed using short-time Fourier transforms and manually scanned to locate chopping events. Operator logs were then collected for a ground truth comparison. Results indicate that both infrasound and seismic signals offer the ability to accurately measure this stage of pyroprocessing, though seismic signals are more prominent. Sensor locations are also evaluated to determine where the signal is detectable. This type of monitoring offers a method to aid in safeguards and proliferation detection by validating a pyroprocessing facility’s schedule and identifying activity that does not align with records.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A Scalable Solution Route to Porous Networks of Nanostructured Black Tungsten

This paper studied the feasibility of a new solution-processed method to manufacture black tungsten nanostructures by laser conversion of tungsten hexacarbonyl precursor on the Inconel 625 substrate under argon atmosphere at ambient pressure. The results show that sublimation of the precursor can be prevented if the decomposition temperature (>170 °C) is achieved using the laser heating method. Three different laser powers from 60–400 W were used to investigate the role of laser parameters on the conversion. It was found that lower laser power of 60 W resulted in a mixture of unconverted precursor and converted tungsten. Higher laser powers >200 W resulted in α-W (BCC) in one step without further heat treatment. Different oxygen concentrations from 0.5 ppm to 21 vol% were used in the laser canister to investigate the effect of oxygen concentration on the conversion. It was found that the hard vacuum (>10−4 torr) or hydrogen is not necessary to obtain α-W (BCC). The solar absorptance varied from 63–97%, depending on the amount of precursor deposited on the substrate and oxygen content in the laser canister. This solution-based laser conversion of tungsten precursor is a scalable method to manufacture tungsten coatings for high-temperature applications.

14 SOLAR ENERGY↗

Hydroxide based Benzyltrimethylammonium degradation: Quantification of rates and degradation technique development

Anion exchange membranes (AEMs) are of interest as hydroxide conducting polymer electrolytes in electrochemical devices like fuel cells and electrolyzers. AEMs require hydroxide stable covalently tetherable cations to ensure required conductivity. Benzyltrimethylammonium (BTMA) has been the covalently tetherable cation that has been most often employed in anion exchange membranes because it is reasonably basic, compact (limited number of atoms per charge), and easily/cheaply synthesized. Several reports exist that have investigated hydroxide stability of BTMA under specific conditions, but consistency within these reports and comparisons between them have not yet been made. While the hydroxide stability of BTMA has been believed to be a limitation for AEMs, this stability has not been thoroughly reported. In this paper, we have found that several methods reported have inherent flaws in their findings due to the difficulty of performing degradation experiments at high temperature and high pH. In order to address these shortcomings, we have developed a reliable, standardized method of determining cation degradation under conditions similar/relevant to those expected in electrochemical devices. The experimental method has been employed to determine BTMA stabilities at varying cation concentrations and elevated temperatures, and has resulted in improved experimental accuracy and reproducibility. Finally and most notably, these results have shown that BTMA is quite stable at 80°C (half-life of ~4 years), a significant increase in stability over what had been reported previously.

14 SOLAR ENERGY↗

A Method for Obtaining High Frequency, Global, IR-Based Convective Cloud Tops for Studies of the TTL

Models of varying complexity that simulate water vapor and clouds in the Tropical Tropopause Layer (TTL) show that including convection directly is essential to properly simulating the water vapor and cloud distribution. In boreal winter, for example, simulations without convection yield a water vapor distribution that is too uniform with longitude, as well as minimal cloud distributions. Two things are important for convective simulations. First, it is important to get the convective cloud top potential temperature correctly, since unrealistically high values (reaching above the cold point tropopause too frequently) will cause excessive hydration of the stratosphere. Second, one must capture the time variation as well, since hydration by convection depends on the local relative humidity (temperature), which has substantial variation on synoptic time scales in the TTL. This paper describes a method for obtaining high frequency (3-hourly) global convective cloud top distributions which can be used in trajectory models. The method uses rainfall thresholds, standard IR brightness temperatures, meteorological temperature analyses, and physically realistic and documented corrections IR brightness temperature corrections to derive cloud top altitudes and potential temperatures. The cloud top altitudes compare well with combined CLOUDSAT and CALIPSO data, both in time-averaged overall vertical and horizontal distributions and in individual cases (correlations of .65-.7). An important finding is that there is significant uncertainty (nearly .5 km) in evaluating the statistical distribution of convective cloud tops even using lidar. Deep convection whose tops are in regions of high relative humidity (such as much of the TTL), will cause clouds to form above the actual convection. It is often difficult to distinguish these clouds from the actual convective cloud due to the uncertainties of evaluating ice water content from lidar measurements. Comparison with models show that calculated cloud top altitudes are generally higher than those calculated by global analyses (e.g., MERRA). Interannual variability in the distribution of convective cloud top altitudes is also investigated.

hydration↗

Viscosity Measurement Using Drop Coalescence in Microgravity

We present in here validation studies of a new method for application in microgravity environment which measures the viscosity of highly viscous undercooled liquids using drop coalescence. The method has the advantage of avoiding heterogeneous nucleation at container walls caused by crystallization of undercooled liquids during processing. Homogeneous nucleation can also be avoided due to the rapidity of the measurement using this method. The technique relies on measurements from experiments conducted in near zero gravity environment as well as highly accurate analytical formulation for the coalescence process. The viscosity of the liquid is determined by allowing the computed free surface shape relaxation time to be adjusted in response to the measured free surface velocity for two coalescing drops. Results are presented from two sets of validation experiments for the method which were conducted on board aircraft flying parabolic trajectories. In these tests the viscosity of a highly viscous liquid, namely glycerin, was determined at different temperatures using the drop coalescence method described in here. The experiments measured the free surface velocity of two glycerin drops coalescing under the action of surface tension alone in low gravity environment using high speed photography. The liquid viscosity was determined by adjusting the computed free surface velocity values to the measured experimental data. The results of these experiments were found to agree reasonably well with the known viscosity for the test liquid used.

Antar, Basil N.↗