Search NASA⌕ Search

SEARCH · Search NASA

Results for “Matrix Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Friction in Forming of UD Composites

Inter-ply and tool/ply friction play a dominant role in hot stamp forming of UD fiber-reinforced thermoplastic laminates. This research treats friction measurements of a PEEK-AS4 composite system. To this end, an in-house developed friction tester is utilized to pull a laminate through two heat controlled clamping platens. The friction coefficient is determined by relating the clamp force to the pull force. The geometry of the gap between the clamping platens is monitored with micrometer accuracy. A first approach to describe the relation between the geometry and frictional behavior is undertaken by applying a standard thin-film theory for hydrodynamic lubrication. Experimental measurements showed that the thin-film theory does not entirely cover the underlying physics. Thus a second model is utilized, which employs a Leonov-model to describe the shear deformation of the matrix material, while its viscosity is described with a multi-mode Maxwell model. The combination of both models shows the potential to capture the complete frictional behavior.

36 MATERIALS SCIENCE↗

Leading effect of CP violation with four generations

In the standard model with a fourth generation of quarks, we study the relation between the Jarlskog invariants and the triangle areas in the 4x4 Cabibbo-Kobayashi-Maskawa matrix. To identify the leading effects that may probe the CP violation in processes involving quarks, we invoke small mass and small angle expansions, and show that these leading effects are enhanced considerably compared to the three-generation case by the large masses of fourth-generation quarks. We discuss the leading effect in several cases, in particular, the possibility of large CP violation in b{yields}s processes, which echoes the heightened recent interest because of experimental hints.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Extracting and Interpreting Electrochemical Impedance Spectra (EIS) from Physics-Based Models of Lithium-Ion Batteries

This paper implements a highly efficient algorithm to extract electrochemical impedance spectra (EIS) from physics-based battery models (e.g., a P2D model). The mathematical approach is different from how EIS is practiced experimentally. Experimentally, the voltage (current) is harmonically perturbed over a wide range of frequencies and the amplitude and phase shift of the corresponding current (voltage) is measured. The experimental approach can be implemented in simulation software, but is computationally expensive. The approach here is to determine locally linear state-space models from the full physical model. The four Jacobian matrices that are the basis of the state-space models can be derived by numerical differentiation of the physical model. The EIS is then extracted from the state-space model using computationally efficient matrix-manipulation techniques. The algorithm can evaluate the full EIS at an instant in time during a transient, independent of whether the battery is in a stationary state. The approach is also able to separate the full-cell impedance to evaluate partial EIS, such as for a battery anode alone. Although such partial EIS is difficult to measure experimentally, the partial EIS provides valuable insights in interpreting the full-cell EIS.

25 ENERGY STORAGE↗

Enhanced superconductivity by near-neighbor attraction in the doped extended Hubbard model

A recent experiment has unveiled an anomalously strong electron-electron attraction in the one-dimensional copper-oxide chain Ba 2–x Sr x CuO 3+δ . While the effect of the near-neighbor electron attraction V in the one-dimensional extended Hubbard chain has been examined recently, its effect in the Hubbard model beyond the one-dimensional chain remains unclear. Here, in this work, we report a density matrix renormalization group study of the extended Hubbard model on long four-leg cylinders on the square lattice. We find that the near-neighbor electron attraction V can notably enhance the long-distance superconducting correlations while simultaneously suppressing the charge-density-wave (CDW) correlations. Specifically, for a modestly strong electron attraction, the superconducting correlations become dominant over the CDW correlations with a Luttinger exponent K sc ~1 and strong divergent superconducting susceptibility. Our results provide a promising way to realize long-range superconductivity in the doped Hubbard model. The relevance of our numerical results to cuprate materials is also discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Inner brane: A D3-brane in Nappi-Witten space from an inner automorphism

Wess-Zumino-Witten (WZW) models are abstract conformal field theories with an infinite-dimensional symmetry which accounts for their integrability, and at the same time they have a sigma-model description of closed-string propagation on group manifolds which, in turn, endows the models with an intuitive geometric meaning. We exploit this dual algebraic and geometric property of WZW models to construct an explicit example of a field-dependent reflection matrix for open strings in the Nappi-Witten model. Demanding the momentum outflow at the boundary to be zero determines a certain combination of the left and right chiral currents at the boundary. This same reflection matrix is obtained algebraically from an inner automorphism, giving rise to a space-filling D-brane. Half of the infinite-dimensional affine Kac-Moody symmetry present in the closed-string theory is preserved by this unique combination of the left and the right chiral currents. The operator-product expansions of these boundary currents are computed explicitly and they are shown to obey the same current algebra as those of the closed-string chiral currents. Different choices of the inner automorphisms correspond to different background gauge field configurations. Only those B-field configurations, and the corresponding D-branes, that preserve the diagonal part of the infinite-dimensional chiral algebras are allowed. In this way the existence of the D-branes in curved spaces is further constrained by the underlying symmetry of the ambient spacetime.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Diagonalization of transfer matrix of supersymmetry U{sub q}(sl-caret(M+1|N+1)) chain with a boundary

We study the supersymmetry U{sub q}(sl-caret(M+1|N+1)) analogue of the supersymmetric t-J model with a boundary. Our approach is based on the algebraic analysis method of solvable lattice models. We diagonalize the commuting transfer matrix by using the bosonizations of the vertex operators associated with the quantum affine supersymmetry U{sub q}(sl-caret(M+1|N+1)).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A generalized 3D elastic model for nanoscale, self-assembled oxide-metal thin films with pillar-in-matrix configurations

In recent years, functional oxide-metal based vertically aligned nanocomposite (VAN) thin films have gained interest due to their intriguing physical properties and multifunctionalities stemming from the complex interactions between the two phases in the film and the substrate. In this work, we develop a model for studying the energetics of these thin film systems, including the effects of both lattice mismatch and capillary forces due to interface curvature. Each phase is incorporated into the model using a phase indicator function, and we introduce the capillary forces as body forces using a vector density representation of the interface. The model is implemented using the finite element method to study the deformation of the thin film which is composed of Au nanopillars embedded in a La 0.7 Sr 0.3 MnO 3 (LSMO) matrix on an SrTiO 3 (STO) substrate. Further, the results suggest that the total energy is lowest for random configurations of pillars compared to ordered square and hexagonal lattice configurations, consistent with the random distribution of pillars found in experiments. Furthermore, we find that the interfacial energy dominates the total energy of each configuration, suggesting that interfacial energy in the system is an important design parameter for nanocomposite growth, along with the lattice mismatch.

36 MATERIALS SCIENCE↗

Evolution of the pseudogap in a polarized Fermi gas

We calculate the single-particle spectral density of a normal (nonsuperfluid) two-component gas of fermions in the BCS-BEC crossover within a T-matrix approximation. We review how noncondensed pairs lead to a spectral density reminiscent of the ordered state, and explore how a gaplike feature in the spectrum evolves as one changes the polarization of the gas. As the gas is polarized, we find that this pseudogap becomes more diffuse and moves away from the Fermi level, reflecting the fact that fewer pairs are present but that they still play an important role in the excitations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

SiC/SiC Cladding Materials Properties Handbook

When a new class of material is considered for a nuclear core structure, the in-pile performance is usually assessed based on multi-physics modeling in coordination with experiments. This report aims to provide data for the mechanical and physical properties and environmental resistance of silicon carbide (SiC) fiber–reinforced SiC matrix (SiC/SiC) composites for use in modeling for their application as accidenttolerant fuel cladding for light water reactors (LWRs). The properties are specific for tube geometry, although many properties can be predicted from planar specimen data. This report presents various properties, including mechanical properties, thermal properties, chemical stability under normal and offnormal operation conditions, hermeticity, and irradiation resistance. Table S.1 summarizes those properties mainly for nuclear-grade SiC/SiC composites fabricated via chemical vapor infiltration (CVI). While most of the important properties are available, this work found that data for the in-pile hydrothermal corrosion resistance of SiC materials and for thermal properties of tube materials are lacking for evaluation of SiC-based cladding for LWR applications.

36 MATERIALS SCIENCE↗

SUBSURFACE CHARACTERIZATION OF 67P/CHURYUMOV–GERASIMENKO’S ABYDOS SITE

On 2014 November 12, the ESA/ Rosetta descent module Philae landed on the Abydos site of comet 67P/Churyumov–Gerasimenko. Aboard this module, the Ptolemy mass spectrometer measured a CO/CO{sub 2} ratio of 0.07 ± 0.04, which differs substantially from the value obtained in the coma by the Rosetta /ROSINA instrument, suggesting a heterogeneity in the comet nucleus. To understand this difference, we investigated the physicochemical properties of the Abydos subsurface, leading to CO/CO{sub 2} ratios close to that observed by Ptolemy at the surface of this region. We used a comet nucleus model that takes into account different water ice phase changes (amorphous ice, crystalline ice, and clathrates) as well as diffusion of molecules throughout the pores of the matrix. The input parameters of the model were optimized for the Abydos site, and the ROSINA CO/CO{sub 2} measured ratio is assumed to correspond to the bulk value in the nucleus. We find that all considered structures of water ice are able to reproduce the Ptolemy observation with a time difference not exceeding ∼50 days, i.e., lower than ∼2% on 67P/Churyumov–Gerasimenko’s orbital period. The suspected heterogeneity of 67P/Churyumov–Gerasimenko’s nucleus is also found possible only if it is constituted of crystalline ices. If the icy phase is made of amorphous ice or clathrates, the difference between Ptolemy and ROSINA’s measurements would rather originate from the spatial variations in illumination on the nucleus surface. An eventual new measurement of the CO/CO{sub 2} ratio at Abydos by Ptolemy could be decisive to distinguish between the three water ice structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ground-state properties of the one-dimensional attractive Hubbard model with confinement: A comparative study

We revisit the one-dimensional attractive Hubbard model by using the Bethe-ansatz-based density-functional theory and density-matrix renormalization method. The ground-state properties of this model are discussed in details for different fillings and different confining conditions in weak-to-intermediate coupling regime. We investigate the ground-state energy, energy gap, and pair-binding energy and compare them with those calculated from the canonical Bardeen-Cooper-Schrieffer approximation. We find that the Bethe-ansatz-based density-functional theory is computationally easy and yields an accurate description of the ground-state properties for weak-to-intermediate interaction strength, different fillings, and confinements. In order to characterize the quantum phase transition in the presence of a harmonic confinement, we calculate the thermodynamic stiffness, the density-functional fidelity, and fidelity susceptibility, respectively. It is shown that with the increase in the number of particles or attractive interaction strength, the system can be driven from the Luther-Emery-type phase to the composite phase of Luther-Emery-type in the wings and insulatinglike in the center.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Half-lives of N = 126 Isotones and the r-Process

Beta decays of N = 126 isotones are studied by shell model calculations. Both the Gamow-Teller (GT) and first-forbidden (FF) transitions are taken into account to evaluate the half-lives of the isotones (Z = 64-72) with the use of shell model interactions based on G-matrix. The FF transitions are found to be important to reduce the half-lives by twice to several times of those obtained by the GT contributions only. Possible implications of the short half-lives of the waiting point nuclei on the r-process nucleosynthesis during the supernova explosions are discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Multicontinuum Flow Models for Assessing Two-Phase Flow in Containment Science

We present a new pre-processor tool written in Python that creates multicontinuum meshes for PFLOTRAN to simulate two-phase flow and transport in both the fracture and matrix continua. We discuss the multicontinuum modeling approach to simulate potentially mobile water and gas in the fractured volcanic tuffs at Aqueduct Mesa, at the Nevada National Security Site.

58 GEOSCIENCES↗

Theory for transport in magnetized plasmas

We present a two fluid model for anomalous thermal, particle and momentum transport which has been derived from kinetic theory using a small parameter ε~10-2. This small parameter can come from either the ratio of wave frequency to cyclotron frequency or the ratio of potential to thermal energies. This fluid model is strongly nonlinear and has an exact closure within the accuracy ε. It can be used to simulate the full radius of a tokamak including internal and edge transport barriers at the same time without introducing any local assumptions for physics model or grid size. It involves a full transport matrix, thus giving possibility for both density and heat pinches. The model can be derived from the Vlasov equation, adding also close collisions and includes particle pinches of the type found in the magnetosphere and in the Massachusetts Institute of Technology elevated dipole machine. Pinches are also in agreement for the heat pinch experiments on Doublet III D including simultaneous particle and heat pinches. For tokamaks it gives the right scaling of confinement time versus heating power. Finally, we have also recovered the Turbulent Equipartition result that the density scales as inverse safety factor q in typical simulations. Thus this model is both fundamental and of high practical use.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Code Benchmark of the HTTF Pressurized Conduction Cooldown Test Using SAM

The High Temperature Test Facility (HTTF) at Oregon State University is an integral system test facility to simulate postulated reactor transients of prismatic high-temperature gas-cooled reactors(HTGRs). A series of test campaigns was launched, providing abundant test data that could be used to benchmark reactor system analysis codes like the System Analysis Module (SAM). In this study, a SAM model of the facility is developed based on the two-dimensional (2D) ring model approach. All components including the ceramic matrix, graphite heaters, helium coolant channels, core barrel, upcomer, pressure vessel, and reactor cavity cooling system are modeled as concentric cylindrical rings. The model is used to simulate one of the benchmark problems-Pressurized Conduction Cooldown (PCC)-within the scope of the Organisation for Economic Co-operation and Development Nuclear Energy Agency International HTTF Benchmark. The simulations consist of two parts. In the first part, operating and boundary conditions as well as thermophysical properties of materials are specified for the benchmark problem. In this work, results from the first part will be used in code-to-code comparison. In the second part, the SAM model is used to simulate Test PG-27, which is the first PCC test carried out in the HTTF, with only two of the ten heater banks activated. The results in the second part are used for code-to-data comparison. Because the helium coolant flow rate is not measured in this facility, it is estimated using the input power and inlet/outlet coolant temperatures. Additionally, radial heat flow in the ceramic blocks is complicated by hundreds of cylindrical coolant channels and heater rods embedded in them. As such, it is necessary to deduce an effective thermal conductivity for the ceramic to analyze the core thermal behavior. SAM predictions of the helium coolant and ceramic temperatures are compared with test data measured in three equivalent sectors. Overall, the SAM results agree reasonably well with test data within the variation of data among the three sectors, which demonstrates SAM's capability in capturing transient effects in HTGR using the simplified 2D ring model.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Linear Solver for Electromagnetic Simulation of General Distribution Feeders

High-fidelity electromagnetic transient (EMT) modeling is required for accurate simulation and analysis of power system dynamics in modern distribution feeders. However, the high-fidelity of EMT models often leads to significant computational challenges, particularly in terms of computational resources and simulation time. This paper investigates the development and application of a detailed EMT model for general distribution feeders, with a focus on improving computational efficiency. A direct linear solver is proposed for a bordered block diagonal (BBD) matrix structure commonly encountered in a EMT model of distribution feeders. The solver integrates the Schur complement method with the block tridiagonal matrix algorithm to enhance the computational performance. The proposed solver is validated using the primary feeder of the IEEE 342-node test system, demonstrating its accuracy and efficiency in EMT simulations. Furthermore, the solver’s performance is benchmarked against MATLAB’s built-in linear solvers, showing significant improvements in computation time while maintaining high fidelity and accuracy in simulation results.

Choi, Jongchan [ORNL] (ORCID:000000025952455X)↗

Reservoir-scale model of geologic hydrogen production from serpentinization: Cyclic injection in a dual-permeability fracture-matrix system

Geologic hydrogen (GeoH 2 ) from serpentinization is a promising low-carbon resource, but its reservoir-scale behavior remains poorly understood. We develop a dual-permeability reactive transport model for an injector–producer well pair in ultramafic rock that couples multiphase flow, heat transfer, geochemistry, and porosity–permeability evolution. Here, the model is calibrated to olivine flow-through experiments and upscaled to two-year long simulations with continuous injection and cyclic injection with shut-in-to-injection ratios (SIR = 1, 0.5, 0.1). Olivine reacts along high-flux pathways to form lizardite and magnetite, increasing pH; H 2 (aq) and H 2 (g) peak early and then decline as exsolution and advective export outpace local generation. Continuous injection yields the highest cumulative H 2 but the lowest water-use efficiency (1.138 x 10 –6 mol/kgw). Cyclic injection increases this ratio to 1.35 x 10 –6 , 1.377 x 10 –6 , and 1.182 x 10 –6 mol/kgw for SIR = 1, 0.5, and 0.1, respectively; SIR = 0.5 provides a ~20% improvement over continuous injection and the best compromise for pilot design.

08 HYDROGEN↗

On the solvability of the quantum Rabi model and its 2-photon and two-mode generalizations

We study the solvability of the time-independent matrix Schrödinger differential equations of the quantum Rabi model and its 2-photon and two-mode generalizations in Bargmann Hilbert spaces of entire functions. We show that the Rabi model and its 2-photon and two-mode analogs are quasi-exactly solvable. We derive the exact, closed-form expressions for the energies and the allowed model parameters for all the three cases in the solvable subspaces. Up to a normalization factor, the eigenfunctions for these models are given by polynomials whose roots are determined by systems of algebraic equations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗