Search NASA⌕ Search

SEARCH · Search NASA

Results for “Partial observability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Photogeology and basin configuration of Mare Smythii

A geologic map of the Mare Smythii region of the moon is presented, and the configuration of the basin is defined. An isopach map of the total thickness of the undivided floor materials is based on the observed dependency of crater rim height to diameter of partially buried craters. Mare Smythii is one of the oldest of the circular basins. The proposed sequence of geologic events is (1) impact that produced the Smythii basin in pre-Imbrian time, (2) extensive period of large-scale pre-Imbrian cratering and isostatic adjustments, (3) deposition of pre-Imbrian and Imbrian plains material, (4) early Imbrian period of cratering followed by an extensive sequence of flows through late Imbrian time in the northeastern part of the basin, and (5) late period of cratering during Eratosthenian and Copernican time that produced young craters.

Stewart, H. E.↗
NASA NTRS1979

Comets: Cosmic connections with carbonaceous meteorites, interstellar molecules and the origin of life

The ions, radicals, and molecules observed in comets may be derived intact or by partial decomposition from parent compounds of the sort found either in the interstellar medium or in carbonaceous meteorites. The early loss of highly reducing primitive atmosphere and its replacement by a secondary atmosphere dominated by H2O, CO2, and N2, as depicted in current models of the earth's evolution, pose a dilemma for the origin of life: the synthesis of organic compounds necessary for life from components of the secondary atmosphere appears to be difficult, and plausible mechanisms have not been evaluated. Both comets and carbonaceous meteorites are implicated as sources for the earth's atmophilic and organogenic elements. A mass balance argument involving the estimated ratios of hydrogen to carbon in carbonaceous meteorites, comets, and the crust and upper mantle suggests that comets supplied the earth with a large fraction of its volatiles. The probability that comets contributed significantly to the earth's volatile inventory suggests a chemical evolutionary link between comets, prebiotic organic synthesis, and the origin of life.

Chang, S.↗
NASA NTRS1980

Formulation of additional observables for ENTREE

The S-band X and Y angles, SAMS, and TACAN range and bearing were incorporated into the ENTREE software for use by experimenters at LaRC for entry trajectory reconstruction purposes. Background discussions present the need for this added capability. Formulations for the various observables are presented. Both north-south and east-west antenna mounts were provided for in the S-band angle computations. Sub-vehicle terrain height variations are included in the SAMS model. Local magnetic variations were incorporated for the TACAN bearing computations. Observable formulations are discussed in detail along with the partial computations.

Findlay, J. T.↗
NASA NTRS1983

On the interaction of a sound pulse with the shear layer of an axisymmetric jet. II - Heated jets

The fluctuating field of a heated jet excited by a sound pulse is simulated numerically. The fluctuations in both the flow field and the far field are studied. The flow field results depend crucially on the stability properties of the heated jet. The altered stability properties due to the heating cause a reduction in the overall fluctuations and a shift of the instability waves into lower frequencies. These changes cause a similar downward shift in the far field spectrum and a reduction in the total far field noise. The results provide a partial explanation in terms of stability theory of experimentally observed properties of the noise of heated jets.

Bayliss, A.↗
NASA NTRS1983

MM Herculis - An eclipsing binary of the RS CVn

V, B and U differential photoelectric photometry has been obtained for the RS Canum Venaticorum-class eclipsing binary star MM Her, with the light outside the eclipse being Fourier-analyzed to study wave migration and amplitude. These, together with the mean light level of the system, have been monitored from 1976 through 1980. Observations within the eclipse have revealed eclipses to be partial, rather than total as previously thought. The geometric elements of the presently rectified light curve are forced on the pre-1980 light curves and found to be compatible. With these elements, and previously obtained double line radial velocity curves, new absolute dimensions of 1.18 solar masses and 1.58 solar radii are calculated for the hotter star and 1.27 solar masses and 2.83 solar radii for the cooler star. The plotting of color indices on the color-color curve indicates G2V and K2IV spectral types.

Sowell, J. R.↗
NASA NTRS1985

Observation of far-infrared transitions between excited states of OH

Spectra of the Kleinmann-Low nebula in Orion detected the 84.42 and 84.60 micron transitions between the 2Pi(3/2) J = 7/2 and 2Pi(3/2) J = 5/2 levels of OH with respective fluxes of 1 x 10 to the -17th and 1.4 x 10 to the -17th W/sq cm. When compared to the 119 micron flux levels of OH discussed by Watson (1982) and the 163 micron flux levels of OH by Viscuso et al. (1985), these results suggest appreciable self-absorption of OH line radiation within the nebula. The CO emission due to the J = 31 to 30 rotational transition at 84.411 microns makes a substantial contribution to the observed 84.22 micron flux, and is probably at least partially absorbed at the 84.42 micron OH transition frequency.

Viscuso, P. J.↗
NASA NTRS1985

Modelling of Laser-Enhanced Chemical Vapor Deposition

Research is directed at development of a detailed model of mass and heat transfer and chemical reaction in the pyrolysis of silane for the growth of thin amorphous silicon substrates incorporating laser heating of the gas phase above the film. The model will be the basis for evaluation of the relative importances of the decomposition of SiH4 in the vapor phase, mass transfer of the intermediate species, e.g., SiH2, and the evolution of hydrogen gas. Plans are also underway for developing a model for homogeneous nucleation of Si in the vapor phase to model the rate limitations observed at high gas-phase temperatures and high partial pressures of silane. Work was concentrated on an almost one-dimensional model for the coupling of the CO2 laser beam for heat transfer of the vapor phase with simple kinetic models for SiH4 decomposition and subsequent absorption of Si vapor on the substrate. Mass transfer in the vapor phase is assumed to be solely by diffusion. The role of convection in the vapor phase caused by the large changes in density in and around the center of the laser beam will be analyzed to evaluate the potential of microgravity experiments for increasing the uniformity of the film and the deposition rate.

Brown, R. A.↗
NASA NTRS1986

Fe-Mg-Mn relations of ureilite olivines and pyroxenes and the genesis of ureilites

Microprobe analyses of ureilite and pigeonite cores are studied. The Fe/Mn-Fe/Mg relationship in the olivine core is examined. It is observed that magnetic processs such as fractional crystallization and partial melting, and FeO reduction contribute to the olivine core composition. The study of the Mg/Mn and Fe/Mn distributions reveals that these two distributions are not in equilibrium in the olivine and pigeonite cores. The effect of a reducing agent, carbon, on the ureilite genesis is investigated. It is concluded that fractional crystallization and FeO reduction are the major processes of ureilite genesis.

Mittlefehldt, D. W.↗
NASA NTRS1990

Isotope mass fractionation during evaporation of Mg2SiO4

Synthetic forsterite (Mg2SiO4) was partially evaporated in vacuum for various durations and at different temperatures. The residual charges obtained when molten Mg2SiO4 was evaporated to 12 percent of its initial mass were enriched in heavy isotopes by about 20, 30, and 15 per mil/amu for O, Mg, and Si, respectively, whereas solid forsterite evaporated to a similar residual mass fraction showed negligible fractionations. These results imply that calcium and aluminum-rich refractory inclusions in carbonaceous chondrites must have been at least partially molten in the primordial solar nebula if the observed large mass fractionation effects were caused by evaporation processes in the nebula.

Davis, Andrew M.↗
NASA NTRS1990

Injection of an overdense electron beam in space

A three-dimensional particle simulation model is used to study the injection and propagation of an overdense electron beam in the vicinity of a conductor in space. Beam electrons with a density of more than 100 times the ambient electron density are modeled using large-scale plasma simulations; in these simulations the surface area of the conductor is several thousands times that of the beam cross section at the injection point. The parameters of the simulations are chosen to allow the realistic simulation of active space experiments such as the Space Shuttle's Spacelab 2 electron beam mission. These simulations confirm space observations that an overdense electron beam can at least partially escape the near vicinity of the spacecraft, even in a fully ionized plasma. Once they have escaped from the vicinity of the spacecraft, these beam electrons should be able to propagate away freely until their energy is dissipated. It is suggested that such large-scale simulations could be useful in interpreting data from space experiments.

Okuda, Hideo↗
NASA NTRS1992

Thermal degradation study of silicon carbide threads developed for advanced flexible thermal protection systems

Silicon carbide (SiC) fiber is a material that may be used in advanced thermal protection systems (TPS) for future aerospace vehicles. SiC fiber's mechanical properties depend greatly on the presence or absence of sizing and its microstructure. In this research, silicon dioxide is found to be present on the surface of the fiber. Electron Spectroscopy for Chemical Analysis (ESCA) and Scanning Electron Microscopy (SEM) show that a thin oxide layer (SiO2) exists on the as-received fibers, and the oxide thickness increases when the fibers are exposed to high temperature. ESCA also reveals no evidence of Si-C bonding on the fiber surface on both as-received and heat treated fibers. The silicon oxide layer is thought to signal the decomposition of SiC bonds and may be partially responsible for the degradation in the breaking strength observed at temperatures above 400 C. The variation in electrical resistivity of the fibers with increasing temperature indicates a transition to a higher band gap material at 350 to 600 C. This is consistent with a decomposition of SiC involving silicon oxide formation.

Tran, Huy Kim↗
NASA NTRS1993

Structural similitude and design of scaled down laminated models

The excellent mechanical properties of laminated composite structures make them prime candidates for wide variety of applications in aerospace, mechanical and other branches of engineering. The enormous design flexibility of advanced composites is obtained at the cost of large number of design parameters. Due to complexity of the systems and lack of complete design based informations, designers tend to be conservative in their design. Furthermore, any new design is extensively evaluated experimentally until it achieves the necessary reliability, performance and safety. However, the experimental evaluation of composite structures are costly and time consuming. Consequently, it is extremely useful if a full-scale structure can be replaced by a similar scaled-down model which is much easier to work with. Furthermore, a dramatic reduction in cost and time can be achieved, if available experimental data of a specific structure can be used to predict the behavior of a group of similar systems. This study investigates problems associated with the design of scaled models. Such study is important since it provides the necessary scaling laws, and the factors which affect the accuracy of the scale models. Similitude theory is employed to develop the necessary similarity conditions (scaling laws). Scaling laws provide relationship between a full-scale structure and its scale model, and can be used to extrapolate the experimental data of a small, inexpensive, and testable model into design information for a large prototype. Due to large number of design parameters, the identification of the principal scaling laws by conventional method (dimensional analysis) is tedious. Similitude theory based on governing equations of the structural system is more direct and simpler in execution. The difficulty of making completely similar scale models often leads to accept certain type of distortion from exact duplication of the prototype (partial similarity). Both complete and partial similarity are discussed. The procedure consists of systematically observing the effect of each parameter and corresponding scaling laws. Then acceptable intervals and limitations for these parameters and scaling laws are discussed. In each case, a set of valid scaling factors and corresponding response scaling laws that accurately predict the response of prototypes from experimental models is introduced. The examples used include rectangular laminated plates under destabilizing loads, applied individually, vibrational characteristics of same plates, as well as cylindrical bending of beam-plates.

Simitses, G. J.↗
NASA NTRS1998

A Simplified Model for the Investigation of Acoustically Driven Combustion Instabilities

A simplified one-dimensional model of reactive flow is presented which captures features of aeropropulsion systems, including acoustically driven combustion instabilities. Although the resulting partial differential equations are one dimensional, they qualitatively describe observed phenomena, including, resonant frequencies and the admission of both steady and unsteady behavior. A number of simulations are shown which exhibit both steady and unsteady behavior, including flame migration and thermo acoustic instabilities. Finally, we present examples of unsteady flow resulting from fuel modulation.

Paxson, Daniel E.↗
NASA NTRS2008

Improved Surface Parameter Retrievals using AIRS/AMSU Data

The AIRS Science Team Version 5.0 retrieval algorithm became operational at the Goddard DAAC in July 2007 generating near real-time products from analysis of AIRS/AMSU sounding data. This algorithm contains many significant theoretical advances over the AIRS Science Team Version 4.0 retrieval algorithm used previously. Two very significant developments of Version 5 are: 1) the development and implementation of an improved Radiative Transfer Algorithm (RTA) which allows for accurate treatment of non-Local Thermodynamic Equilibrium (non-LTE) effects on shortwave sounding channels; and 2) the development of methodology to obtain very accurate case by case product error estimates which are in turn used for quality control. These theoretical improvements taken together enabled a new methodology to be developed which further improves soundings in partially cloudy conditions. In this methodology, longwave C02 channel observations in the spectral region 700 cm(exp -1) to 750 cm(exp -1) are used exclusively for cloud clearing purposes, while shortwave C02 channels in the spectral region 2195 cm(exp -1) 2395 cm(exp -1) are used for temperature sounding purposes. This allows for accurate temperature soundings under more difficult cloud conditions. This paper further improves on the methodology used in Version 5 to derive surface skin temperature and surface spectral emissivity from AIRS/AMSU observations. Now, following the approach used to improve tropospheric temperature profiles, surface skin temperature is also derived using only shortwave window channels. This produces improved surface parameters, both day and night, compared to what was obtained in Version 5. These in turn result in improved boundary layer temperatures and retrieved total O3 burden.

Susskind, Joel↗
NASA NTRS2013

Ultra-Thin Coatings Beautify Art

The craftsmen in the Roman Empire who constructed the Lycurgus Cup 17 centuries ago probably didn't think their artifact would survive for nearly 2,000 years as a prized possession. And they certainly couldn't have known that the technology they used to make it would eventually become an important part of space exploration. Carved from one solid mass, the cup is one of the few complete glass objects from that period, and the only one made from dichroic glass. Meaning "two-colored" in Greek, dichroic glass was originally created by adding trace amounts of gold and silver to a large volume of glass melt. The resulting medium partially reflects the light passing through it, causing an observer to see different colors depending on the direction of the light source. The Lycurgus Cup, for example, is famous for appearing green in daylight and red when lit at night, symbolic of the ripening grapes used to fill it with wine. NASA revitalized the production of dichroic glass in the 1950s and 1960s as a means of protecting its astronauts. Ordinary clear substances cannot protect human vision from the harsh rays of unfiltered sunlight, and everything from the human body to spacecraft sensors and computers are at risk if left unprotected from the radiation that permeates space. The microscopic amounts of metal present in dichroic glass make it an effective barrier against such harmful radiation. While the ancient manufacturing technique called for adding metals to glass melt, NASA developed a process in which metals are vaporized by electron beams in a vacuum chamber and then applied directly to surfaces in an ultra-thin film. The vapor condenses in the form of crystal structures, and the process is repeated for up to several dozen coatings. The resulting material, still only about 30 millionths of an inch thick, is sufficient to reflect radiation even while the glass, or polycarbonate, as in the case of space suit helmets, remains transparent to the human eye.

Source record↗
NASA NTRS2018

D/H Isotope Fractionation During H Diffusion Loss from Clinopyroxene Evidenced in Martian Nakhlites

Knowing the distribution and origin of water in terrestrial planets is crucial to understand their formation, evolution and the source of their atmospheres and surface water. Mantle D/H ratios may be used to determine what type of material contributed water to the terrestrial planets [1]. However, other processes, magmatic or surface alteration processes, can also modify D/H ratios, and for Mars, we only have samples from the crust, as meteorites. The D/H ratio of igneous phases of Martian meteorites is generally explained in terms of the mixing contributions of two reservoirs: surficial with high D/H (dD > 700 ‰) related to interaction with the martian atmosphere (dD ~ 5000‰), and mantle-derived with lower D/H (dD < 500 ‰ but the exact value is still debated)[2]. However, our present study evidences that H loss in clinopyroxene during degassing can significantly fractionate H isotopes and increase their D/H ratios. In situ analyses of H isotopes, and of water, major and trace element contents were performed on the pyroxenes of 5 nakhlites. Nakhlites are clinopyroxenites that likely originated from the same lava flow or shallow magma chamber. Water contents decrease (380 to <5 ppm H2O) with increasing dD (-268 to 4860 ‰). Significant influence from spallation, exchange with the martian atmosphere, shock, surface alteration, and hydrothermal processes is ruled out. Together with the evidence of less water at the edge of individual pyroxene grains compared to their interior, we interpret this correlation as the result of preferential diffusive loss of H relative to D from the already crystallized pyroxenes during ascent of the partially-crystallized magma. Similar H isotope fractionations have been observed in another nominally anhydrous mineral, garnet, during experimental dehydration [3]. These results emphasize that caution is warranted when interpreting H isotope analyses of igneous, nominally anhydrous minerals in terms of planetary processes.

Peslier, A. H.↗
DOE OSTI2024

On gauge amplitudes first appearing at two loops

We study scattering amplitudes in massless non-abelian gauge theory where all outgoing gluons have positive helicity. It has been argued recently by Costello that for a particular fermion representation (8 fundamentals plus one antisymmetric-tensor representation in SU(N)) the one-loop amplitudes vanish identically. We show that this vanishing leads to previously-observed identities among one-loop color-ordered partial amplitudes. We then turn to two loops, where Costello has computed the all-plus amplitudes for this theory, as rational functions of the kinematics for any number of gluons using the celestial chiral algebra (CCA) bootstrap. We show that in dimensional regularization, these two-loop amplitudes are not rational, and they are not even finite as ϵ → 0. However, the finite remainder for four gluons agrees with the formula by Costello. In addition, we provide a mass regulator for the infrared-divergent loop integrals; with this regulator, the CCA bootstrap formula is recovered exactly. Finally, we use the CCA bootstrap to compute the double-trace terms in the theory at two loops for an arbitrary number of gluons.

Dixon, Lance J↗
NASA NTRS2003

Prospect of Using Numerical Dynamo Model for Prediction of Geomagnetic Secular Variation

Modeling of the Earth's core has reached a level of maturity to where the incorporation of observations into the simulations through data assimilation has become feasible. Data assimilation is a method by which observations of a system are combined with a model output (or forecast) to obtain a best guess of the state of the system, called the analysis. The analysis is then used as an initial condition for the next forecast. By doing assimilation, not only we shall be able to predict partially secular variation of the core field, we could also use observations to further our understanding of dynamical states in the Earth's core. One of the first steps in the development of an assimilation system is a comparison between the observations and the model solution. The highly turbulent nature of core dynamics, along with the absence of any regular external forcing and constraint (which occurs in atmospheric dynamics, for example) means that short time comparisons (approx. 1000 years) cannot be made between model and observations. In order to make sensible comparisons, a direct insertion assimilation method has been implemented. In this approach, magnetic field observations at the Earth's surface have been substituted into the numerical model, such that the ratio of the multiple components and the dipole component from observation is adjusted at the core-mantle boundary and extended to the interior of the core, while the total magnetic energy remains unchanged. This adjusted magnetic field is then used as the initial field for a new simulation. In this way, a time tugged simulation is created which can then be compared directly with observations. We present numerical solutions with and without data insertion and discuss their implications for the development of a more rigorous assimilation system.

Kuang, Weijia↗