Search NASA⌕ Search

SEARCH · Search NASA

Results for “Power Testing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Free-flight wind tunnel investigation of a four-engine sweptwing upper-surface blown transport configuration

The dynamic stability characteristics of a four-engine turbofan transport model having an upper-surface blown-jet flap have been investigated by means of the free-flight technique in the Langley full-scale tunnel. The flight characteristics of the model were investigated through a range of lift coefficients from 3 to 8 with all four engines operating and with one outboard engine not operating. Static characteristics were investigated by conventional power-on force tests over the flight-test angle-of-attack range and through the stall.

Parlett, L. P.↗

Free-flight investigation of the stability and control characteristics of a STOL model with an externally blown jet flap

The stability and control characteristics of a four-engine turbofan STOL transport model having an externally blown jet flap have been investigated by means of the flying-model technique in the Langley full-scale tunnel. The flight characteristics of the model were investigated under conditions of symmetric and asymmetric (one engine inoperative) thrust at lift coefficients up to 9.5 and 5.5, respectively. Static characteristics were studied by conventional power-on force tests over the flight-test angle-of-attack range including the stall. In addition to these tests, dynamic longitudinal and lateral stability calculations were performed for comparison with the flight-test results and for use in correlating the model results with STOL handling-qualities criteria.

Parlett, L. P.↗

Exhaust-nozzle characterisitcs for a twin-jet variable-wing-sweep fighter airplane model at Mach numbers to 2.2

A wind-tunnel investigation has been conducted to determine the exhaust-nozzle aerodynamic and propulsive characteristics for a twin-jet variable-wing-sweep fighter airplane model. The powered model was tested in the Langley 16-foot transonic tunnel and in the Langley 4-foot supersonic pressure tunnel at Mach numbers to 2.2 and at angles of attack from about minus 2 to 6 deg. Compressed air was used to simulate the nozzle exhaust flow at values of jet total-pressure ratio from approximately 1 (jet off) to about 21. Effects of configuration variables such as speed-brake deflection, store installation, and boundary-layer thickness on the the nozzle characteristics were also investigated.

Reubush, D. E.↗

A north-south stationkeeping ion thruster system for ATS-F

A one millipound cesium ion thruster system experiment designed for the ATS-F satellite will be used to demonstrate north-south stationkeeping for synchronous satellites. Development effort leading to the present design will be described and test data for qualification and flight acceptance tests will be presented. These include a review of EMI evaluations tests made with the power conditioning subsystem and the thruster simulator, and an extended system operational test. During the extended test, 90 on-off cycles simulated thruster operation in orbit. A planned 18,000 hour ground test of a flight qualified thruster will be discussed.

James, E.↗

Terrestrial applications of FEP-encapsulated solar cell modules

The NASA-Lewis Research Center program of transferring the FEP-encapsulated solar cell technology developed for the space program to terrestrial applications is presented. The electrical power system design and the array mechanical design are described, and power systems being tested are discussed. The latter are located at NOAA-RAMOS weather stations at Sterling, Va., and Mammoth Mountain, Calif.; on the roof of the Lewis Research Center; on a NOAA-Coast Guard buoy in the Gulf of Mexico; in a U.S. Forest Service mountaintop voice repeater station in the Inyo National Forest, Calif., and in a backpack charger for portable transmitter/receivers being used in the same place. Preliminary results of testing are still incomplete, but show that rime ice can cause cracks in modular cells without damaging the FEP though, which keeps the grid lines intact, and that electrically active elements of the module must be completely sealed from salt water to prevent FEP delamination.

Forestieri, A. F.↗

EMI survey for maritime satellite, L-band, shipboard terminal

The United States Lines 15,690-ton commercial-container ship, American Alliance, was selected as lead ship for an onboard EMI survey prior to installation of L-Band shipboard terminals for operation with two, geostationary, maritime satellites. In general, the EMI survey revealed tolerable interference levels onboard ship: radiometer measurements indicate antenna-noise temperatures less than 70 K, at elevation angles of 5 deg and greater, at 1559 MHz, at the output terminals of the 1.2-m-diameter, parabolic-dish antenna for the L-Band shipboard terminal. Other EMI measurements include field intensity from 3 cm- and 10 cm-wavelength pulse radars, and conducted-emission tests of primary power lines to both onboard radars.

Taylor, R. E.↗

Hydrogen environment embrittlement of turbine disk alloys

Astroloy and V-57, two candidate turbine disk alloys for the auxiliary power unit (APU) of the space shuttle propulsion and power system were tested for their resistance to embrittlement in hydrogen environments. Samples of both these nickel-base alloys were subjected to notch and smooth tensile testing and to creep testing in hydrogen. The high resistance exhibited by Astroloy forgings to embrittlement by hydrogen is attributed to the microstructure produced by forging and also to the special heat treatment schedule. V-57 turbine disks successfully completed short-time performance testing in the experimental APU. The use of the Astroloy, however, would permit increasing turbine inlet temperature and the rotational speed beyond those possible with V-57.

Gray, H. R.↗

A vectored-engine-over-wing propulsive-lift concept

An experimental investigation has been conducted to evaluate a unique engine-over-wing propulsive-life scheme for providing maneuver improvement in the subsonic-transonic speed regime. The concept combines the benefits of vectored thrust for added circulation and spanwise blowing for leading-edge-vortex augmentation so as to provide full angle-of-attack aerodynamic improvements. Results of a series of wind tunnel tests employing a powered research model illustrate the propulsive/aerodynamic features of the concept.

Bradley, R. G.↗

Improved radiant-heat oven

Greatly improved oven materially increases lamp life by using a new reflector arrangement. Entire unit uses less power, yet heats test articles to higher temperatures with lower cooling requirements than previous ovens. Improved design offers significant savings in costs and energy.

Beckerle, L. D.↗

Results of baseline tests of the Lucas Limousine

The Lucas Limousine, an electric vehicle, was tested to assess the state-of-the-art of electric vehicles. All tests were made without the regenerative braking system and were conducted at the gross vehicle weight of 7,700 pounds. Over a 30 mph stop and go driving cycle the vehicle went 48.4 miles. The vehicle was able to accelerate to 30 mph in about 15 seconds with a gradeability limit of 16.5 percent. As determined by coast down tests the road power and road energy consumption for the vehicle were 2.92 kilowatts and 0.146 kWh/mi, respectively, at 20 mph. At 40 mph the road power requirement was 11.12 kilowatts and the road energy requirement was 0.278 kWh/mi. The maximum energy economy measured 0.45 kilowatt hours per mile at 30 mph and increased to 0.76 kilowatt hours per mile at 50 mph. Over the 30 mph stop and go driving cycle the energy economy was 0.92 kilowatt hours per mile.

Soltis, R. F.↗

Research requirements for emergency power to permit hover-one-engine-inoperative helicopter operation

The research and technology demonstration requirements to achieve emergency-power capability for a civil helicopter are documented. The goal for emergency power is the ability to hover with one engine inoperative, transition to minimum-power forward flight, and continue to a safe landing where emergency power may or may not be required. The best method to obtain emergency power is to augment the basic engine power by increasing the engine's speed and turbine-inlet temperature, combined with water-alcohol injection at the engine inlet. Other methods, including turbine boost power and flywheel energy, offer potential for obtaining emergency power for minimum time durations. Costs and schedules are estimated for a research and development program to bring emergency power through a hardware-demonstration test. Interaction of engine emergency-power capability with other helicopter systems is examined.

Yost, J. H.↗

Advanced thermionic energy conversion: Joint highlights

A theoretical model was used to study the effects of structured electrodes on converter I-V characteristics and results are given. An auxiliary-ion-source triode operated as a plasmatron was used for studying the enhancement distribution and magnetic effects, and results are reported. Design features of the high current-zero power (ZEPO) converter tests are given.

Source record↗

Free-flight wind-tunnel investigation of a four-engine sweptwing upper-surface blown transport configuration

The dynamic stability and control characteristics of a four-engine turbofan transport model having an upper-surface blown jet flap were investigated by means of the free-flight technique in the Langley full-scale tunnel. The flight characteristics of the model were investigated through a range of lift coefficients from 3 to 8 with all four engines operating and with one outboard engine not operating. Static characteristics were investigated by conventional power-on force tests over the flight-test angle-of-attack range and through the stall.

Parlett, L. P.↗

Efficient rectifying antenna

Rectifying antenna comprised of 17 subarrays positioned closely together to intercept microwave beam features low cost, high conversion efficiency, and high power handling capability. Tests demonstrate efficiency level of 82 percent in converting RF to dc.

Dickinson, R. M.↗

Wake characteristics of a tower for the DOE-NASA MOD-1 wind turbine

A 1/40th scale model of a tower concept designed for a MOD-1 wind power turbine was tested in a low speed wind tunnel. Wake wind speed profiles were measured, and from these were determined local values of wake minimum velocity ratio, average velocity ratio, and width over a range of tower elevations and wind approach angles. Comparison with results from two other all tubular models (MOD-0 and eight leg designs) tested earlier in the same tunnel indicated that wake width and flow blockage at the rotor plane of rotation were slightly larger for the MOD-1 tower than for the other two models. The differences in wake characteristics were attributed to differences in tower geometry and member dimensions.

Savino, J. M.↗

GEOS-3 coherent C-band tracking data reduction and analysis

The availability of a coherent C-Band transponder on an orbiting vehicle has permitted the development of calibration techniques for C-Band radars. Prior coherent tracking was limited to test vehicles in powered flight or skin tracking of orbiting spacecraft. The pulse Doppler range rate data available concurrently and independently with normal range and angle data provides an extremely useful data set for assessing the internal consistency of the radars measurements, particularly when coupled with a trajectory well constrained by orbit dynamics. In order to further assess the precision of the range rate data, a technique was developed to numerically integrate the rate measurements into a pseudo-range data set showing extremely low noise and high sensitivity to systematic radar errors. Evaluation of integrated range data led to improvements in calibration of both the rate and conventional range data. In particular, proper evaluation of the very sensitive integrated ranges required the development of a processing correction for beacon delay variation with signal strength, a significant error in the conventional ranging data.

Krabill, W. B.↗

EMI survey for maritime satellite 1535-1645-MHz shipboard terminal

A 15,690-ton commercial container ship was selected as lead ship for an onboard electromagnetic-interference (EMI) survey prior to installation of 1535-1645-MHz (L-Band) shipboard terminals for communication via a maritime satellite. In general, the EMI survey revealed tolerable interference levels on board ship. Radiometer measurements indicate antenna-noise temperatures less than 70 K at elevation angles of 5 deg and greater at 1559 MHz at the output terminals of the 1.2-m diameter parabolic-dish antenna for the L-band shipboard terminal. Other EMI measurements include field intensity from 3-cm and 10-cm wavelength pulse radars, and conducted-emission tests of primary power lines to both onboard radars.

Taylor, R. E.↗

Solar Cell Modules with Parallel Oriented Interconnections

Twenty-four solar modules, half of which were 48 cells in an all-series electrical configuration and half of a six parallel cells by eight series cells were provided. Upon delivery of environmentally tested modules, low power outputs were discovered. These low power modules were determined to have cracked cells which were thought to cause the low output power. The cracks tended to be linear or circular which were caused by different stressing mechanisms. These stressing mechanisms were fully explored. Efforts were undertaken to determine the causes of cell fracture. This resulted in module design and process modifications. The design and process changes were subsequently implemented in production.

Source record↗