Search NASA⌕ Search

SEARCH · Search NASA

Results for “R PROCESS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Planning, creating and documenting a NASTRAN finite element model of a modern helicopter

Mathematical models based on the finite element method of structural analysis as embodied in the NASTRAN computer code are widely used by the helicopter industry to calculate static internal loads and vibration of airframe structure. The internal loads are routinely used for sizing structural members. The vibration predictions are not yet relied on during design. NASA's Langley Research Center sponsored a program to conduct an application of the finite element method with emphasis on predicting structural vibration. The Army/Boeing CH-47D helicopter was used as the modeling subject. The objective was to engender the needed trust in vibration predictions using these models and establish a body of modeling guides which would enable confident future prediction of airframe vibration as part of the regular design process.

Gabal, R.↗
NASA NTRS1985

Measurements of CCl3F, CCl2F2, CCl4, N2O and SF6 in the Northern Hemisphere stratosphere

An overview of the Department of Energy's High Altitude Sampling Program and some recent trace gas measurement results are presented. Analysis of whole air samples, collected in pressurized bottles, provides information on stratospheric inventories and distributions for CCl3F, CCl2F2, CCl4, N2O and SF6 in the Northern Hemisphere. Based on a linear regression analysis of the data the estimated mean Northern Hemisphere stratospheric concentration of each gas increased as follows: CCl3F changed from 54 to 142 p1/1 (4/74-11/83); CCl2F2 changed from 133 to 268 p1/1 (4/76-11/83); SF6 changed from 160 to 480 f1/1 (4/74-11/83); CC1, changed from 58 to 91 p1/1 (4/75-11/83); N2O changed from 246 to 261 n1/1 (4/76-11/83). The calculated mean Northern Hemisphere stratospheric concentrations of N2O, CCl3F, CCl2F2, and CCl4 after 1980 show larger than expected fluctuations with time. Recent volcanic activity may be a partial cause for these fluctuations through induced changes in stratospheric dynamical processes.

Leifer, R.↗
NASA NTRS1984

Planning, creating and documenting a NASTRAN finite element model of a modern-helicopter

Mathematical models based on the finite element method of structural analysis as embodied in the NASTRAN computer code are widely used by the helicopter industry to calculate static internal loads and vibration of airframe structure. The internal loads are routinely used for sizing structural members. The vibration predictions are not yet relied on during design. NASA's Langley Research Center sponsored a program to conduct an application of the finite element method with emphasis on predicting structural vibration. The Army/Boeing CH-47D helicopter was used as the modeling subject. The objective was used to engender the needed trust in vibration predictions using these models and establish a body of modeling guides which would enable confident future prediction of airframe vibration as part of the regular design process.

Gabel, R.↗
NASA NTRS1985

Finite element methods on supercomputers - The scatter-problem

Certain problems arise in connection with the use of supercomputers for the implementation of finite-element methods. These problems are related to the desirability of utilizing the power of the supercomputer as fully as possible for the rapid execution of the required computations, taking into account the gain in speed possible with the aid of pipelining operations. For the finite-element method, the time-consuming operations may be divided into three categories. The first two present no problems, while the third type of operation can be a reason for the inefficient performance of finite-element programs. Two possibilities for overcoming certain difficulties are proposed, giving attention to a scatter-process.

Loehner, R.↗
NASA NTRS1984

Radical molecule and ion-molecule mechanisms in the polymerization of hydrocarbons and chlorosilanes in R.F. plasmas at low pressures (below 1.0 Torr)

The ion-molecule and the radical-molecule mechanisms are responsible for the dissociation of hydrocarbons, and chlorosilane monomers and the formation of polymerized species, respectively, in the plasma state of a RF discharge. In the plasma, of a mixture of monomer with Ar, the rate determining step for both dissociation and polymerization is governed by an ion-molecular type interaction. Additions of H2 or NH3 to the monomer Ar(+) mixture transforms the rate determining step from an ion-molecular interaction to a radical-molecule type interaction for both monomer dissociation and polymerization processes.

Avni, R.↗
NASA NTRS1984

The spatial structure of terrain - A process signal in satellite digital images

Pattern recognition procedures applied to Landsat imagery carry an implicit assumption that the digital data are independently distributed. That assumption is incorrect over virtually any terrain. Deviations from independence occur because slopes follow a systematic pattern of variation arising from the slope-forming processes. That pattern can be identified using the stochastic process methodology of Box and Jenkins.Angles of adjacent slopes are autocorrelated and the bidirectional reflectance function transfers these systematic slope changes to the sensor. Imagery becomes autocorrelated through this transfer. Autocorrelation in the imagery can be removed through direct calculation from a digital elevation model or by use of stochastic process methodology. The latter has the advantage that the residuals are white noise; and it is applicable in any area, even where a D.E.M. is unavailable. The stochastic process signal can be used to study terrain processes.

Craig, R. G.↗
NASA NTRS1986

EOS: A project to investigate the design and construction of real-time distributed embedded operating systems

The EOS project is investigating the design and construction of a family of real-time distributed embedded operating systems for reliable, distributed aerospace applications. Using the real-time programming techniques developed in co-operation with NASA in earlier research, the project staff is building a kernel for a multiple processor networked system. The first six months of the grant included a study of scheduling in an object-oriented system, the design philosophy of the kernel, and the architectural overview of the operating system. In this report, the operating system and kernel concepts are described. An environment for the experiments has been built and several of the key concepts of the system have been prototyped. The kernel and operating system is intended to support future experimental studies in multiprocessing, load-balancing, routing, software fault-tolerance, distributed data base design, and real-time processing.

Campbell, R. H.↗
NASA NTRS1984

OPTDES.BYU: An interactive optimization package with 2D/3D graphics

The use of the OPTDES.BYU package developed to assist the engineer in obtaining efficient designs is discussed. The package helps the engineer to perform the following fundamental tasks in the design process: (1) interfacing with existing analysis software; (2) defining and redefining the design problem; (3) searching for improved designs; and (4) interpreting results from the design process.

Balling, R. J.↗
NASA NTRS1986

Process research of non-Czochralski silicon material

Simultaneous diffusion of liquid precursors containing phosphorus and boron into dendritic web silicon to form solar cell structures was investigated. A simultaneous junction formation techniques was developed. It was determined that to produce high quality cells, an annealing cycle (nominal 800 C for 30 min) should follow the diffusion process to anneal quenched-in defects. Two ohm-cm n-base cells were fabricated with efficiencies greater than 15%. A cost analysis indicated that the simultansous diffusion process costs can be as low as 65% of the costs of the sequential diffusion process.

Campbell, R. B.↗
NASA NTRS1986

Power cepstrum technique with application to model helicopter acoustic data

The application of the power cepstrum to measured helicopter-rotor acoustic data is investigated. A previously applied correction to the reconstructed spectrum is shown to be incorrect. For an exact echoed signal, the amplitude of the cepstrum echo spike at the delay time is linearly related to the echo relative amplitude in the time domain. If the measured spectrum is not entirely from the source signal, the cepstrum will not yield the desired echo characteristics and a cepstral aliasing may occur because of the effective sample rate in the frequency domain. The spectral analysis bandwidth must be less than one-half the echo ripple frequency or cepstral aliasing can occur. The power cepstrum editing technique is a useful tool for removing some of the contamination because of acoustic reflections from measured rotor acoustic spectra. The cepstrum editing yields an improved estimate of the free field spectrum, but the correction process is limited by the lack of accurate knowledge of the echo transfer function. An alternate procedure, which does not require cepstral editing, is proposed which allows the complete correction of a contaminated spectrum through use of both the transfer function and delay time of the echo process.

Martin, R. M.↗
NASA NTRS1986

Molecular oxygen absorption continua at 195-300 nm and O2 radiative lifetimes

With the aid of new calculations on the transition moments between the six lowest states of O2 (Klotz and Peyerimhoff, 1986), absorption cross sections have been calculated for several oxygen continua. Reasonable agreement is achieved with recent experimental results, the comparison indicating an overestimation of the theoretical transition moment for the A-X system of 20-25 percent. With this adjustment, the calculated radiative lifetime for the O2(A) state is 150 ms, in close agreement with the currently used value. The continua cross sections indicate that absorption by O2(a) cannot be a significant atmospheric process.

Saxon, R. P.↗
NASA NTRS1986

The Vega balloon experiments

The goals of the Vega-1 and -2 experiments were to trace the large- and small-scale motions, measure the turbulent heat and momentum flow in the cloud layer, and determine the physical parameters of the Venus atmosphere. The arrangement of the balloon-probe payload, the balloon-deployment sequence, and the balloon flight paths are described. The balloons drifted latitudinally in the Venus atmosphere about one-third the way around the planet at a height of 53-54 km and speeds close to 67 m/sec. The balloon-probe signals, recorded on earth by radio telescopes of ten countries, are being processed.

Sagdeev, R. Z.↗
NASA NTRS1987

Detailed spectral structure of magnetospheric electron bursts precipitated by lightning

The temporal structure of electron fluxes precipitated by lightning that was measured at night over Wallops Island, Virginia, during August 1984 has been analyzed. A component of the precipitating electrons is almost certainly due to equatorial wave-particle interactions involving equatorial electron cyclotron resonance (EECR) with whistlers which produce pitch angle scattering. Precipitated electron fluxes of equatorial origin are characterized by a very steep spectral power exponent of about -20 above 100 keV. A second electron distribution from some other origin is also found whose time-integrated energy flux appears to be about equal in magnitude to the fluxes identified with the EECR processes.

Goldberg, R. A.↗
NASA NTRS1987

Pressure scaling effects in a scramjet combustion chamber

The test results obtained for a model scramjet over a range of pressure levels corresponding to different flight altitudes involve enthalpies that vary from the ignition limit, at the low temperature end, to temperatures where the dissociation of combustion products severely limits heat release. The minimum temperature is noted to be highly pressure-sensitive; above the ignition limit, the amount of heat release increased markedly with pressure and with combustion chamber length. A FEM computer code has been used to model the mixing and combustion processes.

Morgan, R. G.↗
NASA NTRS1987

Biomass recycle as a means to improve the energy efficiency of CELSS algal culture systems

Algal cultures can be very rapid and efficient means to generate biomass and regenerate the atmosphere for closed environmental life support systems. However, as in the case of most higher plants, a significant fraction of the biomass produced by most algae cannot be directly converted to a useful food product by standard food technology procedures. This waste biomass will serve as an energy drain on the overall system unless it can be efficiently recycled without a significant loss of its energy content. Experiments are reported in which cultures of the alga Scenedesmus obliquus were grown in the light and at the expense of an added carbon source, which either replaced or supplemented the actinic light. As part of these experiments, hydrolyzed waste biomass from these same algae were tested to determine whether the algae themselves could be made part of the biological recycling process. Results indicate that hydrolyzed algal (and plant) biomass can serve as carbon and energy sources for the growth of these algae, suggesting that the efficiency of the closed system could be significantly improved using this recycling process.

Radmer, R.↗
NASA NTRS1988

Control-augmented structural synthesis

A control-augmented structural synthesis methodology is presented in which the structural member sizes and active control system feedback gains are treated simultaneously as independent design variables. Multiple static and harmonic dynamic loading conditions are considered. Constraints are imposed on static displacements, natural frequencies, and the magnitudes of the steady-state dynamic displacements and actuator forces to ensure acceptable system behavior. Side constraints imposed on the design variables protect against the generation of unrealizable designs. Example problems are presented that demonstrate the method and underscore the importance of integrating the structural and active control system design process.

Lust, R. V.↗
NASA NTRS1987

Object apprehension using vision and touch

Researchers define object apprehension as the determination of the properties of an object and the relationships among these properties. They contrast this with recognition, which goes a step further to attach a label to the object as a whole. Apprehension is fundamental to manipulation. This is true whether the manipulation is being carried out by an autonomous robot or is the result of teleoperation involving sensory feedback. Researchers present an apprehension paradigm using both vision and touch. In this model, they define a representation for object apprehension in terms of a set of primitives and features, along with their relationships. This representation is the mechanism by which the data from the two modalities are combined. It is also the mechanism which drives the apprehension process.

Bajcsy, R.↗
NASA NTRS1990

The local environments of low-redshift quasars and powerful radio galaxies

The local environments of 31 low-redshift QSOs and 35 powerful radio galaxies (PRGs) are studied on the basis of V and R CCD frames processed to generate catalogs of companion galaxies. The PRGs and radio-loud QSOs are noted to inhabit regions whose local galaxy densities are similar to normal giant ellipticals and 3-4 times less dense than the regions inhabited by lower power radio-loud elliptical galaxies. The brightest companion galaxy is on average about 2 mag dimmer than the QSO host galaxy or PRG. Attention is given to the implications of these results for theories of the origin of nuclear activity, as well as the relationship between various classes of active galaxies and QSOs.

Smith, Eric P.↗