Search NASA⌕ Search

SEARCH · Search NASA

Results for “RESEARCH PROGRAMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Increasing transcurium production efficiency through direct resonance shielding

The Radiochemical Engineering Development Center at Oak Ridge National Laboratory is the world s leader in production of 252Cf. This and other heavy actinides are produced by irradiation of mixed curium/americium targets in the High Flux Isotope Reactor. Due to the strong dependence of isotopic cross sections upon incoming neutron energy, the efficiency with which an isotope is transmuted is highly dependent upon the neutron flux energy spectrum and intensities. There are certain energy ranges in which the rate of fissions in feedstock materials can be minimized relative to the rate of (n, ) absorptions. It is shown that by perturbing the flux spectrum, it is possible to alter the net consumption of curium feedstock, as well as the yields of key isotopes for the heavy element research program, such as 249Bk and 252Cf. This flux spectrum perturbation is accomplished by means of focused resonance shielding through the use of filter materials. It is further shown that these perturbations can alter the target yields in a significant way, increasing the amount of 252Cf produced per unit curium consumption by over 40%.

Hogle, Susan L↗

Elimination of NO Pollutant in Semi-enclosed Spaces over Sodium-promoted Cobalt Oxyhydroxide (CoOOH) by Oxidation and Adsorption Mechanism

Low concentrations of NOx accumulated in air in semi-enclosed spaces is a severe health hazard, but its efficient removal at low cost is a grand challenge. A simple method in preparing CoOOH for low-concentration NO removal at room temperature is described here. The samples are synthesized by oxidizing Co(OH)2 to CoOOH with different oxidants (Na2S2O8, O2 and H2O2). Among them, CoOOH prepared by Na2S2O8 (Co-NS) shows remarkable performance for NO abatement, while the samples synthesized by and H2O2 (Co-HO) and O2 (Co-OG) have no apparent NO removal capacity. It is found that the Co-NS material contains a higher concentration of residual Na, which contributes to the decreased crystallinity and increased concentrations of surface active species (Co2+, active oxygen) for NO storage. Following NO storage, the material can be readily regenerated by water washing. The authors from East China University of Science and Technology acknowledge support from National Basic Research Program of China (2013CB933200), National Natural Science Foundation of China (21577035, 21577034), Commission of Science and Technology of Shanghai Municipality (15DZ1205305) and 111 Project (B08021). Aiyong Wang acknowledges the China Scholarship Council for the Joint-Training Scholarship Program with the Pacific Northwest National Laboratory (PNNL). PNNL is operated by Battelle for the US DOE under contract DE-AC05-76RL01830. FG is supported by the U.S. DOE/Office of Energy Efficiency and Renewable Energy, Vehicle Technologies Office.

NOx abatement, NOx adsorber, ambient temperature, ↗

Integrated geological, economic, and risk assessment of underground hydrogen storage

Underground hydrogen storage (UHS) is a promising option to buffer variable renewable power and support the hydrogen economy. Yet this technology is early-stage, and key uncertainties remain about how coupled processes such as geochemical and geomechanical impacts affect long-term storage security. In this paper, we seek to integrate the results from a large, multi-scale research program to quantify core feasibility metrics and situate these studies within ongoing efforts. Through this work, we evaluate hydrogen recoverability during storage by assessing diffusive losses, losses to geochemical interactions and their subsequent impact on geomechanical properties, and losses to residual saturation during injection and withdrawal. Molecular and laboratory studies show that lithologic heterogeneity, pore geometry, and mineral surface chemistry govern hydrogen–rock interactions, controlling loss pathways. High-pressure coreflooding is used to estimate relative permeabilities and measure parameters needed for reservoir-scale sensitivity analyses. These core-scale experiments found early hydrogen breakthrough at low saturations driven by capillary and viscous fingering, which limits pore-space utilization at early times, while repeated injection and withdrawal cycles improve deliverability over time. Technoeconomic factors and purity requirements for end uses are also considered as part of our comprehensive feasibility analysis. Finally, we underscore the importance of geophysical monitoring and tailored injection strategies to maintain integrity and efficiency. Together, these results provide a quantitative foundation for safe, scalable deployment of UHS and highlight priorities for future integrated studies.

08 HYDROGEN↗

Evaluation of methods for characterizing the fine particulate matter emissions from aircraft and other diffusion flame combustion aerosol sources

The U. S. Environmental Protection Agency in collaboration with the U. S. Air Force Arnold Engineering Development Complex conducted the VAriable Response In Aircraft nvPM Testing (VARIAnT) 3 and 4 test campaigns to compare nvPM emissions measurements from a variety of diffusion flame combustion aerosol sources (DFCASs), including a Cummins diesel engine, a diesel powered generator, two gas turbine start carts, a J85-GE-5 turbojet engine burning multiple fuels, and a Mini-CAST soot generator. The VARIAnT research program has conducted four test campaigns to date with the VARIAnT 3 and 4 test campaigns focusing on BC mass instrument performance, use of gas turbine engine sources for BC mass instrument calibration, and the characterization of the aerosols produced from the combustion sources. Results from both campaigns revealed agreement of about 20% between the AVL Micro-Soot Sensor, the Cavity Attenuated Phase Shift (CAPS PMSSA) monitor and the thermal-optical reference method for elemental carbon (EC), independent of the calibration source used. For the Artium LII-300, the measured mass concentrations in VARIAnT3 fall within 18% and in VARIAnT4 fall within 32% of the reference EC mass concentration when calibrated on a combustor rig in VARIAnT3 and on a LGT-60 start cart in VARIAnT4, respectively. It was also found that the three mass instrument types (MSS, CAPS PMSSA, and LII-300) can exhibit different BC to reference EC ratios depending on the emission source that appear to correlate to particle geometric mean mobility diameter, morphology, or some other parameter associated with particle geometric mean diameter (GMD) with the LII-300 showing a slightly stronger apparent trend with GMD. Systematic differences in LII-300 measured mass concentrations have been reduced by calibrating with a turbine combustion source (combustor or turbine engine). With respect to the particle size measurements made, the sizing instruments (TSI SMPS, TSI EEPS, and Cambustion DMS 500) were found to be in general agreement in terms of size distributions and concentrations with some exceptions. Teflon filter measurements of the total aerosol mass produced by the various DFCASs differed from the reference EC, BC, and integrated particle sized distribution measured aerosol masses. The Teflon filter measured mass was 30 to 40% greater than the reference EC and 50 to 60% greater than the BC mass for the J85 in both test campaigns. The measurements of particle size distributions and single particle analysis by miniSPLAT indicated the presence of large particles (>100 nm) having more compact morphologies, higher effective density, and a composition dominated by OC and ash. This increased large particle fraction is also associated with higher values of single scattering albedo measured by the CAPS PMSSA instrument and higher OC/EC measurements. These measurements indicate gas turbine engine emissions can be a more heterogeneous mix of particle types beyond the original E31 assumption that it is mainly composed of black carbon.

33 ADVANCED PROPULSION SYSTEMS↗

Field-to-farm gate greenhouse gas emissions from corn stover production in the Midwestern U.S.

Measured field data were used to compare two allocation methods on life cycle greenhouse gas emissions from corn (Zea mays L.) stover production in the Midwest U.S. We used publicly-available crop yield, nitrogen fertilizer, and direct soil nitrous oxide emissions data from the USDA-ARS Resilient Economic Agricultural Practices research program. Field data were aggregated from 9 locations across 26 site-years for 3 stover harvest rates (no removal; moderate removal – 3.1 Mg ha –1 ; high removal – 7.2 Mg ha –1 ) and 2 tillage practices (conventional; reduced/no-till). Net carbon uptake by crops was computed from measured plant carbon content. Monte Carlo simulations sampled input distributions to assess variability in farm-to-gate GHG emissions. The base analysis assumed no change in soil organic carbon stocks. In all cases, net CO 2 uptake during crop growth and soil-respired CO 2 dominated system emissions. Emissions were most sensitive to co-product accounting method, with system expansion emissions ~15% lower than mass allocation. Regardless of accounting method, lowest emissions occurred for a moderate removal rate under reduced/no-till management. The absence of correlations between N fertilization rate and stover removal rate or soil N 2 O emissions in this study challenges the use of such assumptions typically employed in life cycle assessments Storage of all carbon retained on the field as SOC could reduce emissions by an additional 15%. Furthermore, our results highlight how variability in GHG emissions due to location and weather can overshadow the impact of farm management practices on field-to-farm gate emissions. Graphical abstract

54 ENVIRONMENTAL SCIENCES↗

At the interfaces of the hydrologic sciences: Connecting water, elements, ecosystems, and people through the major contributions of Dr. Emily Bernhardt

Here, in this paper, we describe the major contributions of Professor Emily Bernhardt to the hydrologic sciences. Dr. Bernhardt’s work addresses how carbon, nutrient, and contaminant dynamics respond to a wide range of environmental perturbations that alter hydrologic dynamics within and connectivity among ecosystems. Her research leverages intensive and extensive field sampling, experimental manipulations, macroscale data harmonization and exploration, and continental to global-scale synthesis activities to uncover key drivers and patterns of the impacts human perturbations have on water and elemental cycles. Dr. Bernhardt’s research program is defined by her ability to ask questions and use approaches that explicitly consider connectivity and interfaces in a variety of ways. Here, we highlight significant contributions from Dr. Bernhardt’s work, organized by connectivity, interfaces, and interactions among and across (1) elemental cycles, (2) ecosystems, (3) watersheds, (4) scales, and (5) disciplines. We conclude with a section on Dr. Bernhardt’s impact on the hydrologic sciences and beyond through her exceptional dedication to mentorship, engagement, and service.

58 GEOSCIENCES↗

Time Projection Chamber (TPC) detectors for nuclear astrophysics studies with gamma beams

Gamma-Beams at the HIS facility in the USA and anticipated at the ELI-NP facility, now constructed in Romania, present unique new opportunities to advance research in nuclear astrophysics; not the least of which is resolving open questions in oxygen formation during stellar helium burning via a precise measurement of the 12C() reaction. Time projection chamber (TPC) detectors operating with low pressure gas (as an active target) are ideally suited for such studies. We look over the progress of the current research program and plans for the future at the HIS facility with the optical readout TPC (O-TPC) and the development of an electronic readout TPC for the ELI-NP facility (ELITPC).

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The SHMS 11 GeV/c spectrometer in Hall C at Jefferson Lab

The Super High Momentum Spectrometer (SHMS) has been built for Hall C at the Thomas Jefferson National Accelerator Facility (Jefferson Lab). With a momentum capability reaching 11 GeV/ c , the SHMS provides measurements of charged particles produced in electron-scattering experiments using the maximum available beam energy from the upgraded Jefferson Lab accelerator. The SHMS is an ion-optics magnetic spectrometer comprised of a series of new superconducting magnets which transport charged particles through an array of triggering, tracking, and particle-identification detectors that measure momentum, energy, angle and position in order to allow kinematic reconstruction of the events back to their origin at the scattering target. The detector system is protected from background radiation by a sophisticated shielding enclosure. The entire spectrometer is mounted on a rotating support structure which permits measurements to be taken with a large acceptance over laboratory scattering angles from 5.5° to 40°, thus allowing a wide range of low cross-section experiments to be conducted. Finally, these experiments complement and extend the previous Hall C research program to higher energies.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

FABRICATION OF URANIUM OXYCARBIDE KERNELS AND COMPACTS FOR HTR FUEL

As part of the program to demonstrate tristructural isotropic (TRISO)-coated fuel for the Next Generation Nuclear Plant (NGNP), Advanced Gas Reactor (AGR) fuel is being irradiation tested in the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL). This testing has led to improved kernel fabrication techniques, the formation of TRISO fuel particles, and upgrades to the overcoating, compaction, and heat treatment processes. Combined, these improvements provide a fuel manufacturing process that meets the stringent requirements associated with testing in the AGR experimentation program. Researchers at Idaho National Laboratory (INL) are working in conjunction with a team from Babcock and Wilcox (B&W) and Oak Ridge National Laboratory (ORNL) to (a) improve the quality of uranium oxycarbide (UCO) fuel kernels, (b) deposit TRISO layers to produce a fuel that meets or exceeds the standard developed by German researches in the 1980s, and (c) develop a process to overcoat TRISO particles with the same matrix material, but applies it with water using equipment previously and successfully employed in the pharmaceutical industry. A primary goal of this work is to simplify the process, making it more robust and repeatable while relying less on operator technique than prior overcoating efforts. A secondary goal is to improve first-pass yields to greater than 95% through the use of established technology and equipment. In the first test, called “AGR-1,” graphite compacts containing approximately 300,000 coated particles were irradiated from December 2006 to November 2009. The AGR-1 fuel was designed to closely replicate many of the properties of German TRISO-coated particles, thought to be important for good fuel performance. No release of gaseous fission product, indicative of particle coating failure, was detected in the nearly 3-year irradiation to a peak burn up of 19.6% at a time-average temperature of 1038–1121°C. Before fabricating AGR-2 fuel, each fabrication process was improved and changed. Changes to the kernel fabrication process included replacing the carbon black powder feed with a surface-modified carbon slurry and shortening the sintering schedule. AGR-2 TRISO particles were produced in a 6-inch diameter coater using a charge size about 21-times that of the 2-inch diameter coater used to coat AGR-1 particles. The compacting process was changed to increase matrix density and throughput by increasing the temperature and pressure of pressing and using a different type of press. AGR-2 fuel began irradiation in the ATR in late spring 2010.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Hadron Spectroscopy at CLAS and the Evolution of Strong Degrees of Freedom

Understanding the strong force constitutes one of the biggest challenges in fundamental science that we can and have to tackle now as the needed experimental and theoretical tools become available. Perturbative Quantum ChromoDynamics (pQCD) at small distances, which is governed by quark and gluon fields, and Chiral Perturbation Theory (ChPT) at larger distances, which is governed by pion fields, are both already experimentally validated. However, strong fields at intermediate distances, where they generate about 98% of the total mass of nucleons and therefore of all normal matter, are not understood on similarly firm grounds. Electron scattering in particular serves as an ideal tool to investigate this intermediate region by measuring the resonance transition form factors of three-quark systems with varying momentum transfer and spatial resolution of the probe. The status of the research program at Jefferson Lab to study baryon transition form factors and the evolution of the underlying effective degrees of freedom, or the origin of mass, will be exemplified by recent results in single and double-pion production obtained with CLAS by the Hall B collaborations. These results demonstrate that the separation of resonance and background contributions and therefore the extraction of the electro-coupling amplitudes of resonances become easier and cleaner at higher four-momentum transfers (Q2). Furthermore, the double-pion in comparison to the single-pion channel shows a higher sensitivity to energetically higher lying resonances and a distinctly different dependence on the contributing background amplitudes. The combined analysis of the single- and double-pion data thus reduces model dependent uncertainties significantly, which allows us to extract the resonant electro-coupling amplitudes in an unprecedented quality.

Gothe, R. W.↗

Research at the University of Kentucky Accelerator Laboratory

The Department of Physics and Astronomy at the University of Kentucky operates a 7-MV CN Van de Graaff accelerator that produces primary beams of protons, deuterons, and helium ions. An in-terminal pulsing and bunching system operates at 1.875 MHz and is capable of providing 1 ns beam bunches at an average current of several microamperes. Nearly all ongoing research programs involve secondary pulsed neutrons produced with gas cells containing deuterium or tritium, as well as with a variety of solid targets. Most experiments are performed at a target station positioned over a deep pit, so as to reduce the background created by backscattered neutrons. Here, recent experiments will be described; these include: measurements of n-p scattering total cross sections from E n = 90 to 1800 keV to determine the n-p effective range parameter; the response of the plastic scintillator BC-418 below 1 MeV to low-energy recoil protons; n-p radiative capture cross sections important for our understanding of nucleosynthesis approximately 2 minutes after the occurrence of the Big Bang; γ-ray spectroscopy following inelastic neutron scattering to study nuclear structure relevant to double-β decay and to understand the role of phonon-coupled excitations in weakly deformed nuclei; and measurements of neutron elastic and inelastic scattering cross sections for nuclei that are important for energy production and for our global understanding of the interaction of neutrons with matter.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Runtime Tracing of the Community Earth System Model: Feasibility Study and Benefits

The Community Earth System Model (CESM) is one of US's leading earth system modeling frameworks, which has decades of development history and was embraced by a large, active user community. In this paper, we first review the software development history of CESM and we explain the general objectives of performance analysis. Then we present an offline global community land model simulation within the CESM framework to demonstrate the procedure of runtime tracing of CESM using the Vampir toolset. Finally, we explain the benefits of runtime tracing to the general earth system modeling community. We hope those considerations can be beneficial to many other modeling research programs involving legacy high-performance computing applications.

42 ENGINEERING↗

A systems engineering vision for floating offshore wind cost optimization

The U.S. offshore wind resource potential is immense, and often in close proximity to densely-populated coastal load centers. In many U.S. coastal areas, water depths favor the deployment of floating over fixed-bottom offshore wind technology. Floating offshore wind plants have the potential to be cost-competitive with fixed-bottom installations, but because the technology has not yet been deployed at commercial scale, it is not clear when and with what configurations this potential cost parity can be achieved. This article first reviews the state of floating offshore wind technology and deployments to identify key gaps that must be addressed to bring down the overall cost of energy produced. The article then puts forth a long-term vision for a research program and design methodology that may be able to push floating wind plants toward a lower levelized cost of energy than fixed-bottom offshore wind. The method involves a fully integrated systems-engineering and techno-economic design approach to capture the complex interactions between the physics, manufacturing, installation, and operation of floating wind turbines to achieve transformational cost reductions. The approach also envisions multifidelity and uncertainty management strategies to examine the most robust and viable concepts in the design trade-space. To better focus the computational resources, engineering lessons learned from existing offshore wind systems and concept studies are used to develop a set of criteria that can be applied to prefilter candidate technology building blocks that have the greatest cost reduction potential.

17 WIND ENERGY↗

Jianlin Li: Accelerating battery manufacturing and recycling

With continued penetration of consumer electronics and electric vehicles into the evergrowing marketplace, there is a critical need for an efficient and sustainable battery supply chain. This includes the production of raw materials, the design, development, and processing of cell materials and systems, and end-of-life product recycling. The Oak Ridge National Laboratory (ORNL) has established a research program dedicated to addressing many aspects of these key challenges. Here, we asked Jianlin Li, a Senior R&D Staff and leader of the Energy Storage and Conversion Manufacturing Group, his opinion on the role of chemistry and materials science in mitigating the impacts of critical materials in battery supply chains.

25 ENERGY STORAGE↗

Understanding and Design of Bidirectional and Reversible Catalysts of Multielectron, Multistep Reactions

The catalytic properties of the enzymes that transform H2 set very high standards for chemists who aim at designing synthetic electrocatalysts of H2 oxidation and production. Of particular relevance is the observation that some hydrogenases wired to electrodes function in either direction of the reaction depending on the driving force that is applied, and at a significant rate as a result of even a very small deviation from equilibrium. We call the former property "bidirectionality", and the latter "reversibility". Bidirectional and reversible catalysts of H2 oxidation and production have only recently been synthesized. Here we introduce the kinetic modelling of bidirectional two-electron redox reactions in the case of molecular catalysts and enzymes that are either attached to an electrode or diffusing in solution in the vicinity of an electrode. Our theoretical findings are illustrated by previous results obtained with hydrogenases and Nickel diphosphine molecular catalysts. We emphasize that trying to discuss bidirectionality and reversibility in relation to a single redox potential leads to an impasse: the catalyst undergoes two redox transitions, and two catalytic potentials must be defined, which may depart from the two potentials measured in the absence of catalysis. The difference between the two catalytic potentials defines the reversibility; the difference between their average value and the open circuit potential defines the directionality. We aim at giving rules that help discriminate between distinct mechanisms ("ECEC", "EECC" etc.) based on the voltammetric responses, and we discuss the design principles of bidirectionality and reversibility in terms of kinetics. In particular we conclude that neither bidirectionality nor reversibility requires that the catalytic energy landscape be flat. However, sinks and high energy intermediates may negatively impact the catalytic rates. The "efficiency" of a bidirectional catalyst appears to be defined by various figures of merit (rates, directionality, reversibility) that need to be recognized before they can be optimized simultaneously. E.S.W. was supported by the Center for Molecular Electrocatalysis, an Energy Frontier Research Center funded by the U.S. Department of Energy (USDOE), Office of Science, Office of Basic Energy Sciences (BES). The work discussed here was originally supported for WJS by the Office of Science Early Career Research Program through the USDOE, with current funding from the USDOE, BES, Chemical Sciences, Geosciences, and Biosciences program.

Fourmond, Vincent↗

Theoretical study of syngas hydrogenation to methanol on the polar Zn-terminated ZnO(0001) surface

Methanol synthesis from syngas (CO/CO2/H2) hydrogenation on the perfect Zn–terminated polar ZnO(0001) surface have been investigated using periodic density functional theory calculations. Our results show that direct CO2 hydrogenation to methanol on the perfect ZnO(0001) surface is unlikely because in the presence of surface atomic H and O the highly stable formate (HCOO) and carbonate (CO3) readily produced from CO2 with low barriers 0.11 and 0.09 eV will eventually accumulate and block the active sites of the ZnO(0001) surface. In contrast, methanol synthesis from CO hydrogenation is thermodynamically and kinetically feasible on the perfect ZnO(0001) surface. CO can be consecutively hydrogenated into formyl (HCO), formaldehyde (H2CO), methoxy (H3CO) intermediates, leading to the final formation of methanol (H3COH). The reaction route via hydroxymethyl (H2COH) intermediate, a previously proposed species on the defected O–terminated ZnO( ) surface, is kinetically inhibited on the perfect ZnO(0001) surface. The rate-determining step in the consecutive CO hydrogenation route is the hydrogenation of H3CO to H3COH. We also note that this last hydrogenation step is pronouncedly facilitated in the presence of water by lowering the activation barrier from 1.02 to 0.55 eV. This work was supported by the U.S. Department of Energy Office of Basic Energy Sciences, Division of Chemical Sciences, Biosciences and Geosciences, and performed at EMSL, a national scientific user facility sponsored by the Department of Energy’s Office of Biological and Environmental Research located at Pacific Northwest National Laboratory (PNNL). Computational resources were provided at EMSL and the National Energy Research Scientific Computing Center at Lawrence Berkeley National Laboratory. J. Li and Y.-F. Zhao were also financially supported by the National Natural Science Foundation of China (Nos. 20933003 and 91026003) and the National Basic Research Program of China (No. 2011CB932400). Y.-F. Zhao acknowledges the fellowship from PNNL.

10 SYNTHETIC FUELS↗

The DOE E3SM Model Version 2: Overview of the Physical Model and Initial Model Evaluation

Abstract This work documents version two of the Department of Energy's Energy Exascale Earth System Model (E3SM). E3SMv2 is a significant evolution from its predecessor E3SMv1, resulting in a model that is nearly twice as fast and with a simulated climate that is improved in many metrics. We describe the physical climate model in its lower horizontal resolution configuration consisting of 110 km atmosphere, 165 km land, 0.5° river routing model, and an ocean and sea ice with mesh spacing varying between 60 km in the mid‐latitudes and 30 km at the equator and poles. The model performance is evaluated with Coupled Model Intercomparison Project Phase 6 Diagnosis, Evaluation, and Characterization of Klima simulations augmented with historical simulations as well as simulations to evaluate impacts of different forcing agents. The simulated climate has many realistic features of the climate system, with notable improvements in clouds and precipitation compared to E3SMv1. E3SMv1 suffered from an excessively high equilibrium climate sensitivity (ECS) of 5.3 K. In E3SMv2, ECS is reduced to 4.0 K which is now within the plausible range based on a recent World Climate Research Program assessment. However, a number of important biases remain including a weak Atlantic Meridional Overturning Circulation, deficiencies in the characteristics and spectral distribution of tropical atmospheric variability, and a significant underestimation of the observed warming in the second half of the historical period. An analysis of single‐forcing simulations indicates that correcting the historical temperature bias would require a substantial reduction in the magnitude of the aerosol‐related forcing.

54 ENVIRONMENTAL SCIENCES↗

Author Correction: Engineering self-deliverable ribonucleoproteins for genome editing in the brain

Correction to: Nature Communicationshttps://doi.org/10.1038/s41467-024-45998-2, published online 26 February 2024. In the Acknowledgements section of this article, the grant number relating to National Institutes of Health funding to J.A.D. was incorrectly given as RM1HG009490 and should have been U19NS132303. The grant number 2334028 relating to the National Science Foundation funding to J.A.D. was omitted. Funding from Hampton University Summer Undergraduate Research Program, Mr. Li Ka Shing, Emerson Collective and the Innovative Genomics Institute (IGI) were omitted. The original article has been corrected.

60 APPLIED LIFE SCIENCES↗