Search NASA⌕ Search

SEARCH · Search NASA

Results for “SiO2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Ionic liquid versus SiO 2 gated a-IGZO thin film transistors: A direct comparison

Here, ionic liquid gated field effect transistors have been extensively studied due to their low operation voltage, ease of processing and the realization of high electric fields at low bias voltages. Here, we report ionic liquid (IL) gated thin film transistors (TFTs) based on amorphous Indium Gallium Zinc Oxide (a-IGZO) active layers and directly compare the characteristics with a standard SiO 2 gated device. The transport measurements of the top IL gated device revealed the n-channel property of the IGZO thin film with a current ON/OFF ratio ~10 5 , a promising field effect mobility of 14.20 cm 2 V –1 s –1 , and a threshold voltage of 0.5 V. Comparable measurements on the bottom SiO2 gate insulator revealed a current ON/OFF ratio >108, a field effect mobility of 13.89 cm 2 V –1 s –1 and a threshold voltage of 2.5 V. Furthermore, temperature-dependent measurements revealed that the ionic liquid electric double layer can be “frozen-in” by cooling below the glass transition temperature with an applied electrical bias. Positive and negative freezing bias locks-in the IGZO TFT “ON” and “OFF” state, respectively, which could lead to new switching and possibly non-volatile memory applications.

36 MATERIALS SCIENCE↗

Interferometric ellipsometer

We describe an interferometric ellipsometer that, in contrast to previous designs, requires a single reflection from a sample surface so that tan{psi} and {delta} are measured directly. A reference beam is created in one arm of a modified Mach-Zehnder interferometer such that the p and s polarizations have a common phase and fixed relative amplitude, irrespective of the sample. This beam is combined interferometrically with the measurement beam. The output beam is spatially separated into its polarization components and temporal fringes created at the photodetectors via mechanical scanning of one of the mirrors. Measurements made on a reference SiO2 film are in excellent agreement with the calibration certificate while those made on a glass surface demonstrate measurement capabilities for low reflectivity samples. Estimates of the noise performance indicate a precision, in air, of {approx}41 pm.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Paired circularly polarized heterodyne ellipsometer

We develop a paired circularly polarized heterodyne ellipsometer (PCPHE), in which a heterodyne interferometer based on a two-frequency circularly polarized laser beam is set up. It belongs to an amplitude-sensitive ellipsometer that is able to provide not only a wider dynamic range of polarization modulation frequency but also a higher detection sensitivity than that of a conventional photometric ellipsometer. A real-time and precise measurement of ellipsometric parameters, which demonstrated an accuracy of less than 1 nm on thickness measurement of SiO2 thin film deposited on silicon substrate, can be applied with the PCPHE.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Characterization of laser-induced plasmas associated with energetic laser cleaning of metal particles on fused silica surfaces

Here, time-resolved plasma emission spectroscopy was used to characterize the energy coupling and temperature rise associated with single, 10-ns pulsed laser ablation of metallic particles bound to transparent substrates. Plasma associated with Fe(I) emission lines originating from steel microspheres was observed to cool from >24,000 to ~15,000 K over ~220 ns as $\tau$ -0.28 , consistent with radiative losses and adiabatic gas expansion of a relatively free plasma. Simultaneous emission lines from Si(II) associated with the plasma etching of the SiO2 substrate were observed yielding higher plasma temperatures, ~35,000 K, relative to the Fe(I) plasma. Lastly, the difference in species temperatures is consistent with plasma confinement at the microsphere-substrate interface as the particle is ejected, and is directly visualized using pump-probe shadowgraphy as a function of pulsed laser energy.

36 MATERIALS SCIENCE↗

Seeing Inside Materials by Aberration-Corrected Electron Microscopy

The recent successful correction of lens aberrations in the electron microscope has improved resolution by more than a factor of two in just a few years, bringing many benefits for the study of materials. These benefits extend significantly beyond enhanced resolution alone. Aberration correction gives higher resolution by allowing the objective lens to have a wider aperture, which also results in a reduced depth of field. This effect can be used to only focus specific sections inside materials for the first time. In this contribution we describe recent results exploiting this capability. Additionally, we show how combining the microscopy data with first-principles theory gives new insights into materials properties. We cover two applications, both involving heavy atoms in a lighter host. The first shows how single Hf atoms can be mapped in three dimensions inside the 1 nm-wide SiO2 region of a high dielectric constant device structure, and how a link to macroscopic device properties results through theoretical calculations. The second example is from the field of nanoscience, where individual Au atoms are imaged inside Si nanowires grown by a vapor-liquid-solid mechanism. The majority of Au atoms are probably injected by the highly energetic electron beam. However, their observed sites and atomic configurations represent at least meta-stable configurations and match well to results from density functional calculations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Tularosa Basin Play Fairway Analysis: Water Chemistry

This shapefile contains 409 well data points on Tularosa Basin Water Chemistry, each of which have a location (UTM), temperature, quartz and Potassium/Magnesium geothermometer; as well as concentrations of chemicals like Mn, Fe, Ba, Sr, Cs, Rb, As, NH4, HCO3, SO4, F, Cl, B, SiO2, Mg, Ca, K, Na, and Li.

15 GEOTHERMAL ENERGY↗

Utah FORGE: North Milford Groundwater Geochemistry

This dataset contains groundwater geochemistry from several wells in North Milford Valley, Utah, in the region of the Utah FORGE project (Phase 2c). Readme file that discusses the data contained in the Excel spreadsheet. Data include GPS coordinates (UTM, Lat-Long), sampling temperature, pH, Li, Na, K, Ca, Mg, SiO2, B, Cl, F, SO4, HCO3, oxygen, and hydrogen isotopes. Analyses were performed at the Utah State Laboratory and the University of Minnesota.

15 GEOTHERMAL ENERGY↗

Utah FORGE Well 56-32 Sludge XRF

This is an Excel spreadsheet containing the results of X-ray fluorescence from well 56-32 sludge samples. The instrumentation used was a Olympus Vanta M series handheld XRF analyzer. A glass (SiO2) "blank" was analyzed at the beginning and end of each sample batch to detect contamination within the instrument. The standard 2711A was analyzed at the beginning and end of each sample batch to detect drift in instrument precision over time. Material was analyzed in a plastic cup with a prolene thin film cover for minimal interference.

15 GEOTHERMAL ENERGY↗

Developing methodologies for source attribution: glass phase separation in Trinitite using NF3

This study details thermal reactions between glasses, common minerals, and Trinitite post-detonation material with the fluorinating agent nitrogen trifluoride (NF3). The ultimate goal of our investigation is to develop a relatively rapid method for the effective separation of bomb components from complex matrices resulting from a nuclear explosion. Trinitite samples, silicate minerals (quartz; plagioclase and microcline), amorphous SiO2, calcite, a natural glass (obsidian), and two synthetic glasses were characterized extensively before and after the fluorination to fully understand the effects of the NF3 thermal treatment. Samples were reacted with NF3 using a combined thermogravimetric (TG) differential thermal analysis (DTA) unit, as well as in a stainless steel bomb reactor connected to a fluorination line. Subsequent to the NF3 treatment, samples were imaged by scanning electron microscopy in order to document changes in grain size and morphology.

Koeman, Elizabeth C.↗

Materials Data on Y4AlSi2(O2F)5 by Materials Project

Y4AlO6F5(SiO2)2 crystallizes in the triclinic P1 space group. The structure is one-dimensional and consists of two silanediol molecules and one Y4AlO6F5 ribbon oriented in the (1, 0, 0) direction. In the Y4AlO6F5 ribbon, there are four inequivalent Y sites. In the first Y site, Y is bonded in a 1-coordinate geometry to three O and one F atom. There are a spread of Y–O bond distances ranging from 2.15–2.85 Å. The Y–F bond length is 2.05 Å. In the second Y site, Y is bonded in a 1-coordinate geometry to one O and two F atoms. The Y–O bond length is 1.53 Å. There are one shorter (2.08 Å) and one longer (2.42 Å) Y–F bond lengths. In the third Y site, Y is bonded in a 1-coordinate geometry to one O and three F atoms. The Y–O bond length is 2.38 Å. There are a spread of Y–F bond distances ranging from 2.07–2.59 Å. In the fourth Y site, Y is bonded in a 1-coordinate geometry to one O and three F atoms. The Y–O bond length is 1.45 Å. There are a spread of Y–F bond distances ranging from 2.03–2.51 Å. Al is bonded in a 2-coordinate geometry to four O atoms. There are a spread of Al–O bond distances ranging from 1.87–2.27 Å. There are six inequivalent O sites. In the first O site, O is bonded in a 3-coordinate geometry to one Y, one Al, and one O atom. The O–O bond length is 1.68 Å. In the second O site, O is bonded in a single-bond geometry to one Y atom. In the third O site, O is bonded in a 1-coordinate geometry to one Y, one Al, and one O atom. The O–O bond length is 1.75 Å. In the fourth O site, O is bonded in a distorted single-bond geometry to one Y atom. In the fifth O site, O is bonded in a 5-coordinate geometry to two equivalent Y, one Al, one O, and one F atom. The O–F bond length is 1.98 Å. In the sixth O site, O is bonded in a 1-coordinate geometry to one Al and one O atom. There are five inequivalent F sites. In the first F site, F is bonded in a 2-coordinate geometry to three Y atoms. In the second F site, F is bonded in a distorted single-bond geometry to one Y atom. In the third F site, F is bonded in a 1-coordinate geometry to one Y and one O atom. In the fourth F site, F is bonded in a distorted L-shaped geometry to two Y atoms. In the fifth F site, F is bonded in a bent 150 degrees geometry to two Y atoms.

36 MATERIALS SCIENCE↗

High-pressure behavior of 3.65 Å phase: Insights from Raman spectroscopy

Abstract The 3.65 Å phase [MgSi(OH)6] is a hydrous phase that is predicted to be stable in a simplified MgO-SiO2-H2O (MSH) ternary system at pressures exceeding 9 GPa. Along cold subduction zones, it is likely to transport water, bound in its crystalline lattice, into the Earth’s interior. The 3.65 Å phase consists of Mg and Si octahedral sites attached to the hydroxyl group that forms a hydrogen bond and is predicted to undergo pressure-induced symmetrization of the hydrogen bond. Therefore, in this study, we investigate the high-pressure behavior of the 3.65 Å phase using Raman spectroscopy. We have conducted five distinct compressions up to ~60 GPa using two different pressure-transmitting media—alcohol mixture and neon. At ambient conditions, we identified vibrational modes using complementary first-principles simulations based on density functional perturbation theory. Upon compression, we note that the first derivative of the vibrational modes in the lattice region stiffens, i.e., b1lattice > 0. In contrast, the hydroxyl region softens, i.e., b1OH > 0. This is indicative of the strengthening of hydrogen bonding upon compression. We noticed a significant broadening of vibrational modes related to hydroxyl groups that are indicative of proton disorder. However, within the maximum pressures explored in this study, we did not find evidence for pressure-induced symmetrization of the hydrogen bonds. We used the pressure derivative of the vibrational modes to determine the ratio of the bulk moduli and their pressure derivative. We note that the smaller bulk moduli of hydrous phases compared to the major mantle phases are compensated by significantly larger pressure derivatives of the bulk moduli for the hydrous phases. This leads to a significant reduction in the elasticity contrast between hydrous and major mantle phases. Consequently, the detection of the degree of mantle hydration is likely to be challenging at greater depths.

Geochemistry & Geophysics↗

Timescales of spherulite crystallization in obsidian inferred from water concentration profiles

We determined the kinetics of spherulite growth in obsidians from Krafla volcano, Iceland. We measured water concentration profiles around spherulites in obsidian by synchrotron Fourier transform infrared spectroscopy. The distribution of OH? groups surrounding spherulites decreases exponentially away from the spherulite-glass border, reflecting expulsion of water during crystallization of an anhydrous paragenesis (plagioclase + SiO2 + clinopyroxene + magnetite). This pattern is controlled by a balance between the growth rate of the spherulites and the diffusivity of hydrous solute in the rhyolitic melt. We modeled advective and diffusive transport of the water away from the growing spherulites by numerically solving the diffusion equation with a moving boundary. Numerical models fit the natural data best when a small amount of post-growth diffusion is incorporated in the model. Comparisons between models and data constrain the average spherulite growth rates for different temperatures and highlight size-dependent growth among a small population of spherulites.

54 ENVIRONMENTAL SCIENCES↗

Integrated Disposal Facility FY2010 Glass Testing Summary Report

Pacific Northwest National Laboratory was contracted by Washington River Protection Solutions, LLC to provide the technical basis for estimating radionuclide release from the engineered portion of the disposal facility (e.g., source term). Vitrifying the low-activity waste at Hanford is expected to generate over 1.6 × 105 m3 of glass (Puigh 1999). The volume of immobilized low-activity waste (ILAW) at Hanford is the largest in the DOE complex and is one of the largest inventories (approximately 0.89 × 1018 Bq total activity) of long-lived radionuclides, principally 99Tc (t1/2 = 2.1 × 105), planned for disposal in a low-level waste (LLW) facility. Before the ILAW can be disposed, DOE must conduct a performance assessement (PA) for the Integrated Disposal Facility (IDF) that describes the long-term impacts of the disposal facility on public health and environmental resources. As part of the ILAW glass testing program PNNL is implementing a strategy, consisting of experimentation and modeling, in order to provide the technical basis for estimating radionuclide release from the glass waste form in support of future IDF PAs. The purpose of this report is to summarize the progress made in fiscal year (FY) 2010 toward implementing the strategy with the goal of developing an understanding of the long-term corrosion behavior of low-activity waste glasses. The emphasis in FY2010 was the completing an evaluation of the most sensitive kinetic rate law parameters used to predict glass weathering, documented in Bacon and Pierce (2010), and transitioning from the use of the Subsurface Transport Over Reactive Multi-phases to Subsurface Transport Over Multiple Phases computer code for near-field calculations. The FY2010 activities also consisted of developing a Monte Carlo and Geochemical Modeling framework that links glass composition to alteration phase formation by 1) determining the structure of unreacted and reacted glasses for use as input information into Monte Carlo calculations, 2) compiling the solution data and alteration phases identified from accelerated weathering tests conducted with ILAW glass by PNNL and Viteous State Laboratory/Catholic University of America as well as other literature sources for use in geochemical modeling calculations, and 3) conducting several initial calculations on glasses that contain the four major components of ILAW-Al2O3, B2O3, Na2O, and SiO2.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

EBS Report - LANL Experimental update of buffer/backfill at elevated P,T

The Used Fuel Disposition campaign is presently investigating various generic repository options for disposal of used fuel. Of interest are the disposal of high heat load canisters (up to 300 °C), which may allow for a reduced repository footprint. The focus of this experimental work is to increase our understanding on the stability of bentonite barriers under different geochemical and mineralogical conditions other than what has been previously investigated. Experiments were performed at 150 – 160 bars at temperatures up to 300 °C for five to six weeks. Unprocessed Wyoming bentonite was saturated with a K-Ca-Na-Cl-rich water at a 9:1 water:rock ratio. Experiments contained various steel plates or Cu-foil and were buffered to low Eh conditions using magnetite and metallic iron. Other experiments for international EBS research included mixed buffers and a heated bentonite with 20 wt. % free moisture for LBNL. The mixed buffer experiments (bentonite-graphite, bentonite-quartz sand) were conducted to investigate potential mineralogic/petrologic changes to mixed buffer systems proposed by the German nuclear repository program. Reaction products associated with the international EBS research were characterized by LANL with thermal-mechanical properties to be characterized by LBNL. The pH, K + , and Ca 2+ concentrations dropped, while SiO 2(aq) , Na + , and SO 4 2- concentrations increased throughout the experiments. The alkali and alkaline earth metals aqueous concentrations appear to be buffered via the montmorillonite and clinoptilolite exchange reactions. Illite or illite/smectite mixed-layer formation is significantly retarded in the closed system due to Na+ and SiO2(aq) accumulation and limited K + supply. Precursor clinoptilolite underwent extensive dissolution during the six week, 300 °C experiments subsequently producing a high-silicon analcime in addition to authigenic silica phases. Analcime and feldspar formation partially sequesters aqueous Al 3+ , thereby potentially inhibiting illitization. Associated with the zeolite alteration is a ~ 17 % volume decrease (assuming quartz formation) that translates into ~ 2% volume loss in the bulk bentonite. Pyrite decomposition is first observed at ~210 °C, generating available H 2 S (aq,g) that reacts with metal plates or evolves as a gas. The copper rapidly degrades in the presence of H 2 S (aq,g) , resulting in the formation of a chalcocite crust on the copper. A layer of Fe-saponite (or rarely, chlorite) forms at the steel bentonite interface, potentially acting as a passivating agent to retard further metal corrosion. Zeolite mineralogy alteration, metal-bentonite interface reactions, and illitization retardation under these experimental repository conditions are important considerations for the long-term stability evaluation of a used fuel repository.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Expanded Analysis of Hot Isostatic Pressed Iodine-Loaded Silver-Exchanged Mordenite

Reduced silver-exchanged mordenite (Ag0Z) is being evaluated as a potential material to control the release of radioactive iodine that is released during the reprocessing of used nuclear fuel into the plant off-gas streams. The purpose of this study was to determine if hot pressing could directly convert this iodine loaded sorbent into a waste form suitable for long-term disposition. The minimal pretreatment required for production of pressed pellets makes hot pressing a technically and economically desirable process. Initial scoping studies utilized hot uniaxial pressing (HUPing) to prepare samples of non-iodine-loaded reduced silver exchanged mordenite (Ag0Z). The resulting samples were very fragile due to the low pressure (~ 28 MPa) used. It was recommended that hot isostatic pressing (HIPing), performed at higher temperatures and pressures, be investigated. HIPing was carried out in two phases, with a third and final phase currently underway. Phase I evaluated the effects of pressure and temperature conditions on the manufacture of a pressed sample. The base material was an engineered form of silver zeolite. Six samples of Ag0Z and two samples of I-Ag0Z were pressed. It was found that HIPing produced a pressed pellet of high density. Analysis of each pressed pellet by scanning electron microscopy-energy dispersive spectrophotometry (SEM-EDS) and X-ray diffraction (XRD) demonstrated that under the conditions used for pressing, the majority of the material transforms into an amorphous structure. The only crystalline phase observed in the pressed Ag0Z material was SiO2. For the samples loaded with iodine (I-Ag0Z) iodine was present as AgI clusters at low temperatures, and transformed into AgIO4 at high temperatures. Surface mapping and EDS demonstrate segregation between silver iodide phases and silicon dioxide phases. Based on the results of the Phase I study, an expanded test matrix was developed to examine the effects of multiple source materials, compositional variations, and an expanded temperature range. Each sample was analyzed with the approach used in Phase I. In all cases, there is nothing in the SEM or XRD analyses that indicates creation of any AgI-containing silicon phase, with the samples being found to be largely amorphous. Phase III of this study has been initiated and is the final phase of scoping tests. It will expand upon the test matrix completed in Phase II and will examine the durability of the pressed pellets through product consistency testing (PCT) studies. Transformation of the component material into a well-characterized iodine-containing mineral phase would be desirable. This would limit the additional experimental testing and modeling required to determine the long-term stability of the pressed pellet, as much of that information has already been learned for several common iodine-containing minerals. However, this is not an absolute requirement, especially if pellets produced by hot isostatic pressing can be demonstrated through initial PCT studies to retain iodine well despite their amorphous composition.

hot isostatic pressing↗

The Catalysis of Uniform Metal Nanoparticles Deposited onto Oxide Supports: The Components of a Catalyst that Control Activity and Selectivity

Model materials consisting of metal nanoparticles loaded onto oxide supports were synthesized, characterized, and investigated in a number of catalytic chemical reactions. By varying the size, shape, and composition of nanoparticle, as well as the material used to support the nanoparticles, it was found that small changes to the catalyst can have enormous changes to the reaction activity and selectivity. Investigation of these carefully synthesized catalysts via in situ characterization, and reaction studies, leads to a deeper understanding of the molecular level parameters that govern catalysis. Through study of the properties of the nanoparticles it was discovered that nanoparticle size and shape have a dominant role in the chemoselective catalysis of furfural over platinum nanoparticles. When vapor phase furfural and hydrogen gas were passed over Pt nanoparticles ranging in size from 1.5 to 7.1 nm, the catalytic selectivity was found to be dominated by the size of the nanoparticle. Large nanoparticles promoted hydrogenation of furfural to furfuryl alcohol, while smaller nanoparticles favored decarbonylation to furan. The same size specific selectivity was found in the hydrogenative reforming (the transformation of hydrocarbons to branched isomers) of C6 hydrocarbons, in which Pt nanoparticle size controls isomerization selectivity. Methylcyclopentane was found to be extremely size dependent at lower temperatures (553 K). It was found that smaller sized nanoparticles favored isomer formation, while larger sizes catalyzed the aromatization reaction more efficiently. n-hexane was found to be much less dependent on particle size, but still showed an increase in isomerization with small particles over larger sized Pt nanoparticles. The composition of PtxRh1-x bimetallic nanoparticles was also studied. These catalysts were characterized under hexane reforming conditions with Ambient Pressure X-ray Photoelectron Spectroscopy (AP-XPS), in order to find the actual surface atomic composition under real catalytic working conditions. By using AP-XPS and catalytic data in tandem, it was found that an optimum Rh loading occurred when the surface ensemble statistically favored one Rh atom surrounded by Pt atoms. By utilizing different oxide materials for catalytic supports the flow of charge can play a role in the reaction at the surface or interface in a phenomenon known as the strong metal-support interaction (SMSI). When Pt nanoparticles were loaded onto mesoporous supports made of Co3O4, NiO, MnO2, Fe2O3, and CeO2 it was found that their activity for carbon monoxide oxidation was greatly enhanced relative to the support alone or Pt loaded onto inert mesoporous silica. This finding demonstrates that the interface of the metallic Pt nanoparticle and the oxide 2 support is able to produce turnovers that are orders of magnitude higher than the two materials separately. When the same type of experiments were investigated with n-hexane as the reactant and macroporous Al2O3, TiO2, Nb2O5, Ta2O5, and ZrO2 were utilized as supports, it was found that the reaction selectivity was greatly altered depending on the catalytic support material. TiO2, Nb2O5, and Ta2O5 (all of which are strong Lewis acids) were found to be much more selective for isomer production than the standard SiO2 mesoporous silica supported Pt nanoparticle catalyst. Finally, an acidified mesoporous silica material was utilized as the support. This material was synthesized by using AlCl3 to modify the surface of mesoporous silica. This support was found to have no activity for hexane isomerization alone. However, when Pt nanoparticles were supported on the material, the activity and isomer selectivity in hexane reforming was increased several orders of magnitude as compared to the same nanoparticles supported on unmodified mesoporous silica. This dissertation builds on the existing knowledge of known concepts in catalysis science such as structure sensitive reactions, the metal-support interaction, and acid-base chemistry. The results show how small changes in the active sites of a catalyst can create large changes in the catalytic chemistry. This research demonstrates how careful material control, characterization and reaction study can help to elucidate the molecular level components necessary to design efficient catalysts.

Musselwhite, Nathan↗

Re-Release of the ENDF/B VIII.0 S(α,β) Data Processed by NJOY2016

“ENDF/B-VIII.0 provides a major update to the ENDF thermal scattering library. Indeed, it is nearly a completely new sub-library. Only the legacy evaluations for Al, Fe, liquid and solid methane, ortho- and para- hydrogen and deuterium and benzene and the ENDF/B-VII.1 evaluations for SiO2 are unchanged.” Thirty-four (34) materials are provided in ENDF/B-VIII.0 with a total of two hundred and fifty-three (253) evaluations. LEAPR input files are also included for each of the materials as well as “readme” files for most of the materials. All of these 34 thermal scattering files have been re-processed with NJOY2016 (version 53) to produce 253 ACE files suitable for use in MCNP or other similar codes. Table 1 lists the 34 materials which are included in the ENDF/B-VIII.0 thermal scattering library and also notes where major changes have occurred in the re-release.

36 MATERIALS SCIENCE↗

Demonstration of Embedded Sensors in Ceramic Structures

The Transformational Challenge Reactor (TCR) program seeks to demonstrate an advanced 3D printed nuclear reactor core. A binder jet additive manufacturing process is used to fabricate the complex SiC ceramic components of the TCR core. After printing, the components are densified via chemical vapor infiltration (CVI). This process allows complex cavities to be created in which sensors can be placed at strategic locations. Inserting the sensors during the CVI process allows the sensors to be embedded within the component as it is infiltrated. The primary challenge for embedding the sensors is identifying the sensors and sensor sheath materials that can survive the temperatures (>1,000°C) and chemical exposure to H 2 and HCl during CVI. The embedded sensors that are being investigated for use during TCR operation include thermocouples, self-powered neutron detectors, and spatially distributed fiber-optic temperature sensors. This report describes the CVI materials compatibility tests and initial trials for embedding functional sensors. Mo is identified as the most suitable sensor sheath material based on its availability in small diameter tubing, relatively low neutron absorption cross section, and compatibility with H 2 , HCl, and the surrounding SiC matrix at the process temperatures. Amorphous SiO2 fiber-optic samples with Au and Cu metal coatings were successfully embedded in SiC along with bare fibers, although the metal coatings showed some evidence of localized melting during CVI. Initial experiments attempting to embed functional sensors showed that the sensors can be embedded in 3D printed SiC parts, but there are still challenges that must be overcome to ensure that the sensors and sensor sheaths do not fail during CVI. In particular, Nb-sheathed Mo-Nb thermocouples failed at temperatures far lower than expected despite thermodynamic calculations and materials compatibility tests that show the Nb sheath to be compatible with the CVI environment. One potential explanation for the large expansion of the Nb sheath could be related to hydride formation in the lower temperature region of the sheath. Future work will focus on Mo-sheathed thermocouples instead of Nb. The fiberoptic sensors tested during the instrumented experiment broke due to the lack of mechanical protection after their polymer-based coatings were vaporized. Future instrumented experiments will use metal-coated optical fibers for strain sensing to provide additional mechanical protection. However, custom coatings with higher melting points than commercially available Au and Cu might be required. Regardless, fiber-optic sensors are still candidates for spatially distributed temperature measurements since they can be inserted into an embedded metal sheath after CVI.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗