Search NASA⌕ Search

SEARCH · Search NASA

Results for “Solar diffuser”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Solar flares and avalanches in driven dissipative systems

The contention of Lu and Hamilton (1991) that the energy release process in solar flares can be understood as avalanches of many small reconnection events is further developed. The dynamics of the complex magnetized plasma of solar active regions is modeled with a simple driven dissipative system, consisting of a vector field with local instabilities that cause rapid diffusion of the field. It is argued that the avalanches in this model are analogous to solar flares. The distributions of avalanches in this model are compared with the solar flare frequency distributions obtained from ISEE 3/ICE satellite observations. Quantitative agreement is found with the energy, peak luminosity, and duration distributions over four orders of magnitude in flare energy, from the largest flares down to the completeness limit of the observations. It is predicted that the power-law solar flare frequency distributions will be found to continue downward with the same logarithmic slopes to an energy of about 3 x 10 exp 25 ergs and duration of about 0.3 s, with deviations from power-law behavior below these values.

Lu, Edward T.↗
NASA NTRS1978

Characterization of nonideal silicon in terms of lifetime and diffusion length

Experimental methods have been evaluated for the determination of lifetime and diffusion length in silicon intentionally doped with potentially lifetime-degrading impurities which may be present in low-cost silicon intended for use in terrestrial flat-plate arrays. Results obtained with these methods have been compared for mutual consistency. The effects of a number of impurities on bulk lifetime were determined from steady-state photoconductivity, and solar cells fabricated from this material were characterized in terms of diffusion length using a penetrating light technique. Comparison was made with results obtained by others using photoconductivity decay. General agreement was found in terms of the hierachy of impurities to which the lifetime is sensitive. The utility of the steady-state photoconductivity method is established even in the presence of considerable trapping.

Othmer, S.↗
NASA NTRS1991

Long-term changes in the total ozone mapping spectrometer relative to world primary standard Dobson spectrometer 83

The stability of the calibration of the Nimbus 7 solar backscatter UV (SBUV) and total ozone mapping spectrometer (TOMS) instruments by comparing their ozone measurements with those made by a single, very stable Dobson instrument: the world primary standard Dobson spectrometer number 83. Measurements of ozone made with instrument 83 at Mauna Loa observatory in eight summers between 1979 and 1989 were compared with coincident TOMS ozone measurements. The comparison shows that relative to instrument 83, ozone measured by TOMS (and SBUV) was stable between 1979 and approximately 1983, had decreased by 3 percent by 1986, and had decreased by almost 7 percent by 1989. A similar time dependence is seen when data from an ensemble of 39 Dobson stations throughout the world is compared with TOMS over the period 1979-1987. The most likely reason for the relative drift is that the diffuser plate used by both SBUV and TOMS to measure solar flux has suffered an uncorrected wavelength-dependent degradation, with most of the degradation occurring after 1983. The recently released version 6 TOMS data, corrected using the internal 'pair justification' technique, show almost no drift relative to Dobson instrument 83. Accurate measurements of long-term global ozone change will require a coherent system incorporating both ground-based and satellite-based ozone measurements.

Mcpeters, Richard D.↗
DOE OSTI2023

Doped GaInAs/GaP Quantum Well Superlattice Solar Cells With 27.5% Efficiency

Quantum wells can extend the absorption range of a solar cell and are typically placed in the intrinsic region of the device to enable efficient carrier collection via drift. Thick intrinsic regions are needed for significant absorption in the low bandgap quantum wells, resulting in a large depletion region recombination and ultimately a solar cell with a low fill factor (FF). However, in quantum well superlattice solar cells where tunneling plays a dominant role in carrier transport, collection by carrier diffusion may be possible, relieving the requirement for quantum wells to be placed in the intrinsic region. Here, we investigate doping in stress-balanced quantum well superlattice solar cells using thin 2 nm GaP barriers. Doping reduces J02 depletion region recombination and improves the solar cell FF up to 86.7%, but very high doping eventually reduces the carrier collection, leading to a tradeoff in efficiency. Finally, we show that the barrier thickness also plays an important role in carrier collection, and we demonstrate high efficiency 27.5% single-junction devices with a doped superlattice.

13 HYDRO ENERGY↗
NASA NTRSDate not supplied

A Brief History of the Curation of Genesis Sapphire Solar Wind Collectors

Commercial, high purity semiconductor sapphire (AKA corundum) wafers were used as one of the passive solar wind collector materials on the Genesis sample return mission because it exhibited lower diffusion rates for alkali elements than silicon and had sufficiently low alkali blanks. The 20 whole hexagons of sapphire flown on the Genesis spacecraft were distributed among the solar wind (SW) regimes as follows: 8 bulk solar wind (plus two half hexagons), 4 coronal mass ejection (CME), 4 coronal hole (CH), and 4 interstream (IS). Excellent overviews: a) collector material properties presented in [1] and b) solar wind environment experienced by collectors presented in [2].

Genesis sample return mission↗
NASA NTRS1989

Encapsulated diffusion of sulphur into InP

This talk outlines a simple process for the fabrication of n(+)-p solar cells in indium phosphide. Large area cells (greater than 0.25 sq cm) have been made by this process, with a photovoltaic conversion efficiency of 15.21 percent under AM0 conditions of illumination. An ideality factor of 1.1 and a saturation current density of 8 x 10 to the minus 15th power A/sq cm have been observed for these cells. The technique for cell fabrication involves the diffusion of sulfur into InP by an open tube process, and gives highly reproducible results from run to run. A vacuum-deposited layer of gallium sulphide (Ga2S3) was used as the source for sulfur diffusion, with a chemically vapor deposited SiO2 cap layer to prevent decomposition of the InP surface during heat treatment. Diffusions were carried out in a flowing nitrogen ambient at 585 to 708 C, and characterized by their surface carrier concentration and the diffusion constant. The diffusion profile for sulfur in InP is estimated to be of the complementary error function type. The activation energy of the diffusion was estimated to be 1.94 eV. The technique described here is ideally suited for the fabrication of shallow n(+)-p junctions in InP, and has been used for space-borne solar cells.

Parat, K. K.↗
DOE OSTI2018

A novel blanket annealing process to achieve highly transparent and conducting Al doped ZnO thin films: Its mechanism and application in perovskite solar cells

Achievement of high conductivity by doping an oxide thin film while maintaining its high visible transparency remains a challenge in the field of materials science and technology. Here, we demonstrate a simple and novel technique to control compensating defects in Al doped ZnO (AZO) thin films involving a post-growth annealing process with Zn blanket. We also provide an in-depth understanding of the mechanism of achieving high conductivity. As low as 8.8 ..omega../sq sheet resistance (resistivity 3.1 x 10 -4 Ω cm) with 90% visible transmission value and wherefrom a figure of merit (FOM) value of 6.5 x 10 -2 Ω -1 for a RF sputtered 350 nm AZO thin film can be achieved. Such very low sheet resistance has been attributed to a decrease in the number of compensating defects and lesser out diffusion of Zn in AZO. Application of the developed AZO film as conducting substrate has successfully been tested by fabricating perovskite solar cells on flexible Corning(R) Willow(R) Glass substrate. The present findings open up the possibility of enough high quality industrial-scale production of transparent conducting oxides (TCOs) bearing crucial significance from the perspective of transparent electrodes for solar cells.

14 SOLAR ENERGY↗
NASA NTRS1998

Sensitivity of nulling interferometers to extra-solar zodiacal emission (EZE)

It should be possible to discover and to analyze the atmospheres of Earth-like planets of nearby stars, provided their thermal emission is not overwhelmed by a bright zodiacal cloud in the same system. Nulling interferometers in space, such as the Terrestrial Planet Finder, can efficiently suppress a stellar point source, but there is no way to suppress diffuse emission underlying the planet under study. A cloud much brighter than solar level would cause serious reduction in sensitivity, by its photon shot noise. Since some clouds have been detected that are orders of magnitude brighter, zodiacal measurements of TPF candidates to solar level are critically needed. These could be obtained relatively soon with the largest aperture ground-based interferometers observing in the 10 micron atmospheric window. A cloud would be detectable as an infrared excess, provided the stellar emission (some 10(exp 4) times brighter) is adequately suppressed by destructive interference. Ideally, the ground interferometer should have angular response similar to that of TPF, so as to measure directly the troublesome zodiacal component. The individual elements must be large, for even with approx. 8 m apertures, star cancellation and low thermal background, integration times of at least several hours will be needed to sense the clouds against shot noise from telescope thermal emission. In this paper we compare the sensitivity of TPF and ground based interferometers to a twin of the solar system at 10 pc, using Good's (1994) model of the zodiacal cloud.

Angel, Roger↗
DOE OSTI2024

Understanding Process–Structure Relationships during Lamination of Halide Perovskite Interfaces

Fabrication of halide perovskite (HP) solar cells typically involves the sequential deposition of multiple layers to create a device stack, which is limited by the thermal and chemical incompatibility of top contact layers with the underlying HP semiconductor. One emerging strategy to overcome these restrictions on material selection and processing conditions is lamination, where two half-stacks are independently processed and then diffusion bonded to complete the device. Lamination reduces the processing constraints on the top side of the solar cell to allow new device designs, expanded use of deposition methods, and self-encapsulation of devices. While laminated perovskite solar cells with high efficiencies and novel interlayer combinations have been demonstrated, there is a limited understanding of how the lamination process parameters affect the diffusion-bond quality and material properties of the resulting HP layer. In this study, we systematically vary temperature, pressure, and time during lamination and quantify the resulting impacts on bonded area, grain domain size, and photoluminescence. A design of experiments is performed, and statistical analysis of the experimental results is used to quantitatively evaluate the resulting process–structure–property relationships. The lamination temperature is found to be the key parameter controlling these properties. Furthermore, a temperature of 150 °C enables successful bonding over 95% of the substrate area and also results in increases in apparent grain domain size and photoluminescence intensity. Based on these insights, the lamination temperature of functional perovskite solar cell devices is varied, demonstrating the importance of the resulting bond quality on device performance metrics.

14 SOLAR ENERGY↗
DOE OSTI2025

Co‐Doping Approach for Enhanced Electron Extraction to TiO 2 for Stable Inorganic Perovskite Solar Cells

Inorganic perovskite CsPbI 3 solar cells hold great potential for improving the operational stability of perovskite photovoltaics. However, electron extraction is limited by the low conductivity of TiO 2 , representing a bottleneck for achieving stable performance. In this study, a co‐doping strategy for TiO 2 using Nb(V) and Sn(IV), which reduces the material's work function by 80 meV compared to Nb(V) mono‐doped TiO 2 , is introduced. To gain fundamental understanding of the processes at the interfaces between the perovskite and charge‐selective layer, transient surface photovoltage measurements are applied, revealing the beneficial effect of the energetic and structural modification on electron extraction across the CsPbI 3 /TiO 2 interface. Using 2D drift‐diffusion simulations, it is found that co‐doping reduces the interface hole recombination velocity by two orders of magnitude, increasing the concentration of extracted electrons by 20%. When integrated into n–i–p solar cells, co‐doped TiO 2 enhances the projected T S80 lifetimes under continuous AM1.5G illumination by a factor of 25 compared to mono‐doped TiO 2 . This study provides fundamental insights into interfacial charge extraction and its correlation with operational stability of perovskite solar cells, offering potential applications for other charge‐selective contacts.

14 SOLAR ENERGY↗
NASA NTRS1994

Papers presented to the Conference on Chondrules and the Protoplanetary Disk

The following topics are covered in the presented papers: (1) producing chondrules; (2) carbons, CAI's, and chondrules; (3) large scale processes in the solar nebula; (4) chondrule-matrix relationships in chondritic meteorites; (5) overview of nebula models; (6) constraints placed on the nature of chondrule precursors; (7) turbulent diffusion and concentration of chondrules in the protoplanetary nebula; (8) heating and cooling in the solar nebula; (9) crystallization trends of precursor pyroxene in ordinary chondrites; (10) precipitation induced vertical lightning in the protoplanetary nebula; (11) the role of chondrules in nebular fractionations of volatiles and other elements; (12) astronomical observations of phenomena in disks; (13) experimental constraints on models for origins of chondrules, and various other topics.

Source record↗
NASA NTRS1977

Studies of silicon pn junction solar cells

Modifications of the basic Shockley equations that result from the random and nonrandom spatial variations of the chemical composition of a semiconductor were developed. These modifications underlie the existence of the extensive emitter recombination current that limits the voltage over the open circuit of solar cells. The measurement of parameters, series resistance and the base diffusion length is discussed. Two methods are presented for establishing the energy bandgap narrowing in the heavily-doped emitter region. Corrections that can be important in the application of one of these methods to small test cells are examined. Oxide-charge-induced high-low-junction emitter (OCI-HLE) test cells which exhibit considerably higher voltage over the open circuit than was previously seen in n-on-p solar cells are described.

Lindholm, F. A.↗
NASA NTRS1972

Solar flare particle propagation: Comparision of a new analytic solution with spacecraft measurements

An analytic solution was obtained to the complete Fokker-Planck equation for solar flare particle propagation including the effects of convection, energy-change, corotation, and diffusion. It is assumed that the particles are injected impulsively at a single point in space, and that a boundary exists beyond which the particles are free to escape. Several solar flare particle events were observed with solar and galactic cosmic ray experiment aboard OGO 6. Detailed comparisons of the predictions of the solution with observations of 1 to 70 MeV protons show that the model adequately describes both the rise and decay times. The solution also yields a time evolution for the vector anisotropy which agrees well with reported observations.

Lupton, J. E.↗
NASA NTRS2015

An Update to the NASA Reference Solar Sail Thrust Model

An optical model of solar sail material originally derived at JPL in 1978 has since served as the de facto standard for NASA and other solar sail researchers. The optical model includes terms for specular and diffuse reflection, thermal emission, and non-Lambertian diffuse reflection. The standard coefficients for these terms are based on tests of 2.5 micrometer Kapton sail material coated with 100 nm of aluminum on the front side and chromium on the back side. The original derivation of these coefficients was documented in an internal JPL technical memorandum that is no longer available. Additionally more recent optical testing has taken place and different materials have been used or are under consideration by various researchers for solar sails. Here, where possible, we re-derive the optical coefficients from the 1978 model and update them to accommodate newer test results and sail material. The source of the commonly used value for the front side non-Lambertian coefficient is not clear, so we investigate that coefficient in detail. Although this research is primarily designed to support the upcoming NASA NEA Scout and Lunar Flashlight solar sail missions, the results are also of interest to the wider solar sail community.

Heaton, Andrew F.↗
NASA NTRS2014

Cross-Scale Observational Signatures of Magnetic Reconnection

Magnetic reconnection is a significant mechanism for energy release across many astrophysical applications. In the solar atmosphere, reconnection is considered a primary contributor of flare evolution and coronal heating. Directly observing reconnection occurring in the solar atmosphere, however, is not trivial considering that the scale size of the diffusion region is magnitudes smaller than the observational capabilities of current instrumentation, and coronal magnetic field measurements are not currently sufficient to capture the process. Meanwhile, reconnection occurring in the Earth's magnetosphere transfers energy from the solar wind through a comparable process, although on vastly different scales. Magnetospheric measurements are made in situ rather than remotely; ergo, comparison of observations between the two regimes allows for potentially significant insight into reconnection as a stochastic and possibly turbulent process. We will present a set of observations from long-duration solar events and compare them to in situ measurements from the magnetosphere.

Savage, Sabrina↗
NASA NTRS1991

Solar radiation on Mars: Update 1991

Detailed information on solar radiation characteristics on Mars are necessary for effective design of future planned solar energy systems operating on the surface of Mars. A procedure and solar radiation related data are presented from which the daily variation of the global, direct beam and diffuse insolation on Mars are calculated. Given the optical depth of the Mars atmosphere, the global radiation is calculated from the normalized net flux function based on multiple wavelength and multiple scattering of the solar radiation. The direct beam was derived from the optical depth using Beer's law, and the diffuse component was obtained from the difference of the global and the direct beam radiation. The optical depths of the Mars atmosphere were derived from images taken of the Sun with a special diode on the cameras used on the two Viking Landers.

Appelbaum, Joseph↗
NASA NTRS1981

Energetic particle spectra in finite shocks - The earth's bow shock

Particle acceleration and escape at the earth's bow shock wave are discussed in order to account for reported exponential fast particle spectra. A model is presented of particle acceleration in a finite two-dimensional shock perpendicular to the magnetic field, with particle parallel and perpendicular diffusion coefficients inversely proportional to each other. It is shown that the exponential particle energy per unit charge spectra observed by Ipavich et al. (1979) for the case of a radial solar wind magnetic field may be obtained if the fast particles escape the shock by means of resonant diffusion to unconnected field lines. The calculated e-folding value of the energy/charge ratio is found to be independent of the level of turbulence near the shock and in good agreement with observations. For the case of a nonradial solar wind magnetic field, the model is noted to predict that convection may be the dominant means of escape. It is also pointed out that the parallel and perpendicular diffusion coefficients may be measured indirectly at the bow shock.

Eichler, D.↗