Search NASA⌕ Search

SEARCH · Search NASA

Results for “Solids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

A Cross‐Linked Flexible Metaferroelectrolyte Regulated by 2D/2D Perovskite Heterostructures for High‐Performance Compact Solid‐State Sodium Batteries

Abstract To address the issues of limited ionic conductivity and poor interface stability at room and low temperatures in solid‐state electrolytes, a robust intrinsic ferroelectrolyte or nanoferroelectrolyte strategy for engineering solid‐state flexible ferroelectric composite electrolytes utilizing strongly coupled intrinsic ion conducting 2D/2D sodium‐rich anti‐perovskite (NaRAP)/ferroelectric perovskite heterostructures is introduced. Herein, highly scalable PVDF‐based metaferroelectrolytes with Na 2.99 Ba 0.005 OCl/Ca 2 Na 2 Nb 5 O 16 − (CNNO − ) nanosheets into a ferroelectric poly(vinylidene fluoride‐co‐hexafluoropropylene) (PVDF‐HFP) matrix, through an in situ cross‐linking and spontaneous bridging method, for compact solid‐state sodium batteries (SSBs), are reported. Benefiting from unique well‐dispersed 3D ferroelectric coupled network and the Na 2.99 Ba 0.005 OCl/CNNO − ‐induced PVDF‐HFP ferroelectric β phase, the Na + flux is regulated, thereby inhibiting Na dendrite growth at the interface. Notably, the optimized PH‐5% NC metaferroelectrolyte exhibits rapid ion transport (1.11 × 10 −4 S cm −1 at 25 °C), a wide electrochemical window (> 4.8V), superior conformal mechanical compatibility, improved flexibility, good elasticity and flame retardancy. The solid‐state Na 3 V 2 (PO 4 ) 3 /PH‐5% NC/Na batteries present a stable cycling performance (remaining 56.4 mAh g −1 after 500 cycles at 1 C) even at 0 °C, potential for cost‐effective, safe, stable and compact SSB energy storage over 600 Wh L −1 , vastly surpassing 365 Wh L −1 of the current commercial sodium‐ion liquid‐electrolyte batteries.

Chemistry↗
DOE OSTI2021

Single-Ion Conducting Polymer Electrolytes for Solid-State Lithium–Metal Batteries: Design, Performance, and Challenges

Realizing solid-state lithium batteries with higher energy density and enhanced safety compared to the conventional liquid lithium-ion batteries is one of the primary research and development goals set for next-generation batteries in this decade. In this regard, polymer electrolytes have been widely researched as solid electrolytes due to their excellent processability, flexibility, and low weight. With high cationic transference numbers (t Li + close to 1), single-ion conducting polymer electrolytes (SICPEs) have tremendous advantages compared to polymer electrolyte systems (t Li + < 0.4) because of their potential to reduce the buildup of ion concentration gradients and suppress growth of lithium dendrites. The current review covers the fundamentals of SICPEs, including anionic unit synthesis, polymer structure design, and film fabrication, along with simulation and experimental results in solid-state lithium–metal battery applications. Overall, a perspective on current challenges, possible solutions, and potential research directions of SICPEs is also discussed to provide the research community with the critical technical aspects that may advance SICPEs as solid electrolytes in next-generation energy storage systems.

25 ENERGY STORAGE↗
DOE OSTI2019

Experimental investigation on multiscale hydrodynamics in a novel gas–Liquid–Solid three phase jet-Loop reactor

Multiphase flow hydrodynamics in a novel gas–liquid–solid jet-loop reactor (JLR) were experimentally investigated at the macroscales and mesoscales. The chord length distribution was measured by an optical fiber probe and transformed for bubble size distribution through the maximum entropy method. The impacts of key operating conditions (superficial gas and liquid velocity, solid loading) on hydrodynamics at different axial and radial locations were comprehensively investigated. JLR was found to have good solid suspension ability owing to the internal circulation of bubbles and liquid flow. The gas holdup, axial liquid velocity, and bubble velocity increase with gas velocity, while liquid velocity has little influence on them. Compared with the gas–liquid JLRs, solids decrease the gas holdup and liquid circulation, reduces the bubble velocity and delays the flow development due to the enhanced interaction between bubbles and particles (Stokes number >1). This work also provides a benchmark data for computational fluid dynamics (CFD) model validation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Encapsulation Enhances the Quantum Coherence of a Solid‐State Molecular Spin Qubit

Spins within molecules benefit from the atomistic control of synthetic chemistry for the realization of qubits. One advantage is that the quantum superpositions of the spin states encoding the qubit can be coherently manipulated using electromagnetic radiation. The main challenge is the fragility of these superpositions when qubits are to partake of solid-state devices. We address this issue with a supramolecular approach for protecting molecular spin qubits against decoherence. The molecular qubit [Cr(ox)3]3- has been encapsulated inside the diamagnetic triple-stranded helicate [Zn2L3]4+ (L is a bis-pyrazolylpyridine ligand). The quantum coherence of the protected qubit is then analyzed with pulsed EPR spectroscopy and compared with the unprotected qubit, both in solution and in the solid state. Crucially, the spin-spin relaxation in the solid state has been examined within diamagnetic crystal lattices of the isostructural ([Al(ox)3]@[Zn2L3])+ or [Al(ox)3]3- assemblies, respectively, doped with the Cr3+ qubit in two different (<10%) concentrations. The study unveils a surprising increase of the phase memory time of the qubit upon encapsulation only in the solid. Spin-lattice relaxation times also exhibit a significant enhancement, as established from inversion recovery pulse sequences and from slow relaxation of the magnetization of the protected qubit, not featured by the free qubit.

Swain, Abinash↗
DOE OSTI2020

Simulation of mineral dissolution at the pore scale with evolving fluid-solid interfaces: review of approaches and benchmark problem set

This manuscript presents a benchmark problem for the simulation of single-phase flow, reactive transport, and solid geometry evolution at the pore scale. The problem is organized in three parts that focus on specific aspects: flow and reactive transport (part I), dissolution-driven geometry evolution in two dimensions (part II), and an experimental validation of three-dimensional dissolution-driven geometry evolution (part III). Five codes are used to obtain the solution to this benchmark problem, including Chombo-Crunch, OpenFOAM-DBS, a lattice Boltzman code, Vortex, and dissolFoam. These codes cover a good portion of the wide range of approaches typically employed for solving pore-scale problems in the literature, including discretization methods, characterization of the fluid-solid interfaces, and methods to move these interfaces as a result of fluid-solid reactions. A short review of these approaches is given in relation to selected published studies. Results from the simulations performed by the five codes show remarkable agreement both quantitatively--based on upscaled parameters such as surface area, solid volume, and effective reaction rate--and qualitatively--based on comparisons of shape evolution. This outcome is especially notable given the disparity of approaches used by the codes. Therefore, these results establish a strong benchmark for the validation and testing of pore-scale codes developed for the simulation of flow and reactive transport with evolving geometries. They also underscore the significant advances seen in the last decade in tools and approaches for simulating this type of problem.

58 GEOSCIENCES↗
DOE OSTI2019

Outcomes of hypercalcemia of malignancy in patients with solid cancer: a national inpatient analysis

Hypercalcemia of malignancy (HCM) is present in one-third of cancer patients and is associated with a significant mortality risk of 50% within 1 month of diagnosis. We aimed to study the impact and outcomes of HCM in hospitalized patients with solid cancer. We analyzed data captured in the National Inpatient Sample database of the Agency of Healthcare Research and Quality. The study included all hospitalizations in adult solid cancer patients between January 2012 and September 2015 with hypercalcemia. All encounters associated with HCM were identified using the ICD-9 code (275.42) for hypercalcemia. Encounters with other known causes of hypercalcemia were excluded. The co-primary outcomes were incidence of HCM and inpatient mortality. During the study period, 7,501,209 hospitalizations met our inclusion criteria. Approximately 1.7% (n = 126,875) of these hospitalizations were related to HCM. This corresponds to approximately 1 in 59 solid malignancy associated hospitalizations. The mean age of patients with HCM was 65.7 years; 49% were females; 69% were Caucasians; 73% had metastatic disease and 22% received a palliative care consult. When compared to those without HCM, those hospitalized with HCM had a significantly longer mean hospital length of stay (7.3 days vs. 5.6 days, p < 0.001), higher inpatient mortality (12.3% vs. 5.5%, adjusted OR 1.76 (95% CI 1.69–1.84), p < 0·0001), and a greater likelihood of discharge to other facilities (27.4% vs. 16.2%, p < 0.0001). Although HCM accounts for < 2% of all hospitalizations in patients with solid cancer, those with HCM display higher mortality than those without HCM.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2019

Ligand Exchange/Scrambling Study of Gold(I)-Phosphine Complexes in the Solid Phase by DESI-MS Analysis

Only a few analytical techniques are available for the characterization of mechanochemical synthetic reaction products. We demonstrate here that DESI-MS is a powerful technique for this purpose, combining the selectivity of MS-based assays with the simplicity and in situ analysis capability of ambient ionization methods. In this work, we report that auranofin, a gold-based drug, and its precursor triethylphosphine gold(I) chloride undergo a complex array of ligand exchange/scrambling reactions with thiol-containing amino acids in the solid state. The products were readily characterized by DESI-MS analysis from the solid-phase reaction, clearly exhibiting ligand exchange and scrambling, with independent confirmation by solid state {sup 13}C-NMR. The thioglucose and triethylphosphine moieties exchanged with cysteine and its derivatives, whereas the glutathione replaced 2,3,4,6-tetra-O-acetyl-β-1-D-glucopyranose only. It was concluded that ligand exchange and scrambling reactions can be carried out in the solid state, and some of the unique products reported in this study can be conveniently prepared through mechanochemical synthesis in good yields (> 98%), as demonstrated by synthesis of (L-cysteinato-S)-triethylphosphine gold(I) from triethylphosphine gold(I) chloride and L-cysteine. .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Lagrange-Remap strategy for multi-material fluid-solid simulations using compressive limiters

In the present work, the Lagrange-Remap strategy proposed in [1] is extended to multi-material fluid-solid simulations. Both hypo-elastic and hyper-elastic material models are considered to describe the mechanical behavior of the solids. In practice, the deviatoric stress tensor (for hypo-elastic materials) and the left Cauchy-Green tensor (for isotropic hyper-elastic materials) are remapped, while the use of compressive limiters effectively reduces numerical diffusion during the remapping step. The simplicity of this diffuse interface approach is emphasized in the context of multi-material fluid-solid simulations. A series of Lagrange-Remap test cases, involving both solids and fluids, are conducted and compared with reference Lagrangian simulations, demonstrating the robustness and accuracy of the overall numerical strategy.

Compressive limiters↗
DOE OSTI2022

Highly efficient interface stabilization for ambient-temperature quasi-solid-state sodium metal batteries

Solid-state sodium (Na) batteries (SSSBs) using sulfide-based solid electrolytes (SSEs) hold tremendous promise due to their high theoretical specific capacity, enhanced safety and abundant resources. However, detrimental interfacial issues between SSEs and Na metal present a major challenge to the advancement of sulfide-based SSSBs. To address interfacial issues, we demonstrate an efficient approach by incorporating an ionic liquid electrolyte ((PYR/Na)TFSI) as interlayer to stabilize the Na metal/SSE interface. The presence of the (PYR/Na)TFSI interlayer enables the formation of a stable solid electrolyte interphase (SEI) to prevent the harmful reactions and inhibit Na dendrites. Combination of ab initio molecular dynamics simulations and X-ray photoelectron spectroscopy revealed that this stable SEI is largely composed of reduced products of TFSI -, such as NaF and CF 3 . As a result, the symmetric cells exhibited stable Na plating/striping cycling for 300 h at 0.1 mA cm -2 . In addition, FeS2||Na quasi-solid-state batteries delivered an impressive specific capacity of over 300 mAh g -1 under the current density of 20 mA g -1 at room temperature. Under a higher current density (100 mA g -1 ), such batteries performed with long-term cycling stability and maintained a specific capacity of around 103 mAh g -1 after 330 cycles. This work demonstrates the novel perspective of using an ionic liquid interlayer to address interfacial issues, contributing to the advancement of high-performance SSSBs for the next-generation energy storage systems.

25 ENERGY STORAGE↗
DOE OSTI2022

Chemical redox of lithium-ion solid electroactive material in a packed bed flow reactor

Chemical redox reactions between solid electroactive materials and dissolved electroactive compounds are a necessary component of emerging technologies relevant to renewable energy including high energy density flow batteries and battery material recycling. In this work, an initial investigation of heterogeneous chemical redox for a packed bed reactor configuration between solid electroactive material and dissolved redox shuttles will be described. Experimental conditions including the height of the packed bed, the redox shuttle solution concentration, solution flow rate, and operating temperature were varied and their impact on the molar conversion of the solid electroactive material in the packed bed was quantified using electroanalytical techniques on the reactor effluent. The progression of the reaction and its dependence on the different variables explored will be discussed in the context of the limiting processes for porous packed aggregates of the solid electroactive material undergoing chemical oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

A continuum framework for coupled solid deformation–fluid flow through anisotropic elastoplastic porous media

We present a continuum framework for coupled solid deformation–fluid flow in anisotropic elastoplastic porous media. A thermodynamic formulation of the coupled processes gives rise to an anisotropic Biot tensor that is a function of drained elastic tangent moduli tensor of the solid skeleton and the intrinsic bulk modulus of the solid constituent. Two effective stress measures emerge from the formulation, namely, σ', which is energy-conjugate to the elastic strain, and σ'', which is energy-conjugate to the plastic strain. For the special case of transverse isotropy that is commonly encountered in natural rocks, the Biot tensor can be expressed in terms of its normal and tangential components to the bedding plane, along with a microstructure tensor. Apart from its thermodynamic consistency, an advantage of this new formulation is that standard mixed finite element formulation can be employed to discretize the domain and solve initial boundary-value problems. We conduct plane strain simulations of coupled solid deformation–fluid flow in a transversely isotropic porous medium to demonstrate the impacts of material anisotropy, stress history, and the Biot tensor on the system response.

42 ENGINEERING↗
DOE OSTI2021

Bimodal particle distributions with increased thermal conductivity for solid particles as heat transfer media and storage materials

Solid particles are being considered in several high temperature thermal energy storage systems and as heat transfer media in a variety of advanced power generation systems, particularly in concentrated solar power plants. The downside of such an approach is the low overall heat transfer coefficients caused by the inherently low thermal conductivity values of the low-cost solid media when coupled to heat exchanger for the power cycle working fluid. Choosing the right particle size distribution, emittance, and material of the solid media can all make a substantial difference in packed bed thermal conductivity. Current research though exclusively focuses on continuous unimodal distributions of particles. Here, in this work, we propose the use of a binary particle system with a bimodal size distribution to significantly increase packed bed thermal conductivity by reducing packed bed porosity. This is the first study related to ceramic solid particle heat transfer that has considered the thermal conductivity of non-unimodal size distributions at room and elevated temperatures. The following study found that for the binary particle system using Carbo particles CP 16/30 – CP 70/140 where the large particle volume fraction was 50% there was an 17–47% increase in packed bed thermal conductivity when compared with a nearly unimodal particle size distribution of CP 16/30 between 50 and 300 °C. Two different porosity and effective thermal conductivity models were studied, with one providing better prediction of porosity but both effective thermal conductivity models providing less predictive capacity. Importantly this approach can have a substantial impact of thermal performance, with little to no impact on the particle cost.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Theoretical understanding of stability of the oxygen electrode in a proton-conductor based solid oxide electrolysis cell

The oxygen electrode in a proton-conductor based solid oxide cells is often a triple-conducting material that enables the transport and exchange of electrons (e - ), oxygen ions (O 2- ), and protons (H + ), thus expanding active areas to enhance the oxygen electrode activity. In this work, a theoretical model was developed to understand stability of tri-conducting oxygen electrode by studying chemical potentials of neutral species (i.e., μ o 2 , μ H 2 , and μ H 2 O ) as functions of transport properties, operating parameters, and cell geometry. Our theoretical understanding shows that (1): In a conventional oxygen-ion based solid oxide cell, a high μ o 2 (thus high oxygen partial pressure) exists in the oxygen electrode during the electrolysis mode, which may lead to the formation of cracks at the electrode/electrolyte interface. Further, while in a proton-conductor based solid oxide cell, the μ o 2 is reduced significantly, suppressing the crack formation, and resulting in improved performance stability (2). In a typical proton-conductor based solid oxide electrolyzer, the dependence of μ o 2 on the Faradaic efficiency is negligible. Hence, approaches to block the electronic current can improve the electrolysis efficiency while achieving stability (3). The difference of the μ o 2 (thus p o 2 ) between the oxygen electrode and gas phase can be reduced by using higher ionic conducting components and improving electrode kinetics, which lead to further improvement of electrode stability.

08 HYDROGEN↗
DOE OSTI2016

ZrB 2 -HfB 2 solid solutions as electrode materials for hydrogen reaction in acidic and basic solutions

Spark plasma sintered transition metal diborides such as HfB 2 , ZrB 2 and their solid solutions were investigated as electrode materials for electrochemical hydrogen evolutions reactions (HER) in 1 M H 2 SO 4 and 1 M NaOH electrolytes. HfB 2 and ZrB 2 formed complete solid solutions when mixed in 1:1, 1:4, and 4:1 ratios and they were stable in both electrolytes. The HER kinetics of the diborides were slower in the basic solution than in the acidic solutions. The Tafel slopes in 1 M H 2 SO 4 were in the range of 0.15 - 0.18 V/decade except for pure HfB 2 which showed a Tafel slope of 0.38 V/decade. In 1 M NaOH the Tafel slopes were in the range of 0.12 - 0.27 V/decade. The composition of Hf x Zr 1-x B 2 solid solutions with x = 0.2 - 0.8, influenced the exchange current densities, overpotentials and Tafel slopes of the HER. As a result, the EIS data were fitted with a porous film equivalent circuit model in order to better understand the HER behavior. In addition, modeling calculations, using density functional theory approach, were carried out to estimate the density of states and band structure of the boride solid solutions.

25 ENERGY STORAGE↗
DOE OSTI2023

A critical review of existing and emerging technologies and systems to optimize solid waste management for feedstocks and energy conversion

Solid waste generation and its accumulation is increasing at an alarming pace due to population growth and urbanization posing severe risks to health, safety, and natural ecosystems. Herein this review strategically addresses the challenges and solutions to increasing the sustainability footprint of solid waste management (SWM) systems by revealing multipronged approaches that reduce solid waste and handling costs while generating revenue and reducing greenhouse gas and related emissions. For example, the United States sends ~150 million tons of waste to landfills, which is composed of over 75% organic and recyclable materials having a potential to be diverted to alternative scenarios. The emergence of an automated upstream and downstream sorting process for solid waste to increase material diversion from landfills is a promising approach for creating sustainable SWM. The utilization of artificial-intelligence-enabled smart and automated systems at the home and industrial scales, comprehensive public re-education including awareness of the adverse effects of landfilled waste on the ecosystem, and more eco-friendly product development are required to significantly reduce landfills and their negative footprint.

09 BIOMASS FUELS↗
DOE OSTI2018

Lithium-ion conductive ceramic textile: A new architecture for flexible solid-state lithium metal batteries

Designing solid-state lithium metal batteries requires fast lithium-ion conductors, good electrochemical stability, and scalable processing approaches to device integration. In this work, we demonstrate a unique design for a flexible lithium-ion conducting ceramic textile with the above features for use in solid-state batteries. The ceramic textile was based on the garnet-type conductor Li 7 La 3 Zr 2 O 12 and exhibited a range of desirable chemical and structural properties, including: lithium-ion conducting cubic structure, low density, multi-scale porosity, high surface area/volume ratio, and good flexibility. The solid garnet textile enabled reinforcement of a solid polymer electrolyte to achieve high lithium-ion conductivity and stable long-term Li cycling over 500 h without failure. The textile also provided an electrolyte framework when designing a 3D electrode to realize ultrahigh cathode loading (10.8 g/cm 2 sulfur) for high-performance Li-metal batteries.

25 ENERGY STORAGE↗
DOE OSTI2026

A structural and electrochemical study of perfluoropolyether-poly(ethylene oxide) solid polymer electrolytes

Solid polymer electrolytes offer attractive safety, processability, and interfacial adhesion for enabling high–energy solid-state lithium batteries, but they are often limited by narrow oxidative stability windows and low lithium-ion transference numbers. In an attempt to broaden the electrochemical stability window and increase lithium-ion transference number of poly(ethylene oxide) (PEO)-based solid polymer electrolytes, we produce an optically clear, crosslinked membrane of PEO and perfluoropolyether (PFPE) using a mixed solvent method and subsequently infuse the membrane with a lithium salt. Structural and thermal analyses reveal nanoscale phase separation between fluorocarbon and hydrocarbon domains with characteristic spacings of 7–8 nm and an elevated glass transition for the hydrocarbon phase. Consistent with this, PFPE-containing membranes exhibit substantially lower ionic conductivity than PEO analogs (dry and plasticized). The transference number and electrochemical stability are similar to pure PEO. These results demonstrate that fluorination implemented as segregated nanoscale domains does not deliver the anticipated transport or stability benefits; instead, phase separation increases tortuosity and suppresses hydrocarbon-phase dynamics. The work underscores the importance of fluorine placement and morphology control, guiding the design of partially fluorinated solid polymer electrolytes toward architectures that avoid detrimental nanoscale phase separation.

Carden, Peyton [ORNL] (ORCID:0000000162296538)↗
DOE OSTI2025

Solid solutions limited by grain-boundary solute clustering in ultrafine-grained alloys

Immiscible Ag-Cu alloys exhibit complex behavior due to varying Cu solid solubilities reported under equilibrium and metastable conditions. In ultrafine-grained alloys, these limits are further complicated by a high fraction of grain boundaries, where solute atoms tend to segregate and, in some cases, form clusters. Here, this study investigates the influence of Cu solute segregation and clustering on solid-solution limits in ultrafine-grained Ag-Cu alloys synthesized by magnetron sputtering with varying Cu content. X-ray diffraction peak shifts reveal a solid-solution concentration plateau for Cu contents from 4.9 to 11.7 at %, in contrast to the peak shifts predicted by density-functional theory for Ag-Cu alloys. Scanning transmission electron microscopy further reveals limited solid solubility and the formation of numerous Cu-rich clusters at grain boundaries. Atomistic simulations demonstrate that such limited solubility does not arise from grain boundary segregation alone, but only when strong solute-solute interactions promote the formation of grain-boundary Cu solute clusters.

Density-functional theory↗