SEARCH · Search NASA
Results for “Structural Effects”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Sorption and Oxidative Degradation of Small Organic Molecules on Mn-Oxides-Effects of pH and Mineral Structures
Manganese (Mn)-oxides regulate carbon (C) cycling in soils by sorbing and oxidizing organic compounds. The composition of soil organic matter varies widely, and little is known about the reactivity of individual organic compounds with structurally diverse Mn-oxides under various environmentally relevant pH conditions. Here, in this study, we examined the affinity of six organic compounds for three Mn-oxides, comprised of layer (birnessite and hydrous Mn oxide HMO) or tunnel (cryptomelane) structures, at acidic (pH 4), slightly acidic (pH 6), and slightly alkaline (pH 8) conditions. Cryptomelane, with a higher specific surface area and point of zero charge, showed higher reactivity than that of HMO and birnessite. Interestingly, these Mn-oxides, although different in structures, decomposed each organic compound to form the same products. Citrate, pyruvate, ascorbate, and catechol induced reduction and dissolution of Mn-oxides. After the reaction, the average oxidation state of Mn in the solids was much lower at pH 4 than at pH 6 and 8, suggesting more reduction under more acidic conditions. Even when reacting with phthalate and propanol, which only sorbed to Mn-oxides but did not degrade, there was proton-promoted Mn dissolution under acidic conditions. These results suggest the significance of environmental pH and mineral structures in affecting the Mn–organic interactions and provide fundamental insights into a better understanding of the roles of Mn-oxides in regulating soil C cycling.
Fluctuation Effects on the Brush Structure of Mixed Brush Nanoparticles in Solution
A potentially attractive way to control nanoparticle assembly is to graft one or more polymers on the nanoparticle, to control the nanoparticle–nanoparticle interactions. When two immiscible polymers are grafted on the nanoparticle, they can microphase separate to form domains at the nanoparticle surface. Here, we computationally investigate the phase behavior of such binary mixed brush nanoparticles in solution, across a large and experimentally relevant parameter space. Specifically, we calculate the mean-field phase diagram, assuming uniform grafting of the two polymers, as a function of the nanoparticle size relative to the length of the grafted chains, the grafting density, the enthalpic repulsion between the grafted chains, and the solvent quality. We find a variety of phases including a Janus phase and phases with varying numbers of striped domains. Using a nonuniform, random distribution of grafting sites on the nanoparticle instead of the uniform distribution leads to the development of defects in the mixed brush structures. Introducing fluctuations as well leads to increasingly defective structures for the striped phases. Furthermore, we find that the simple Janus phase is preserved in all calculations, even with the introduction of nonuniform grafting and fluctuations. We conclude that the formation of the Janus phase is more realistic experimentally than is the formation of defect-free multivalent mixed brush nanoparticles.
Effects of Size and Structural Defects on the Vibrational Properties of Lanthanum Hexaboride Nanocrystals
Not Available
Effect of the Lignin Structure on the Physicochemical Properties of Lignin-Grafted-Poly(ε-caprolactone) and Its Application for Water/Oil Separation
Lignin-grafted poly(ε-caprolactone) copolymers (lignin-g-PCLs) have shown wide application potentials in coatings, biocomposites, and biomedical fields. However, the structural heterogeneity of lignin affecting the structures and properties of lignin-g-PCL has been scarcely investigated. In this study, kraft lignin is fractionated into four precursors, namely, F ins , F1, F2, and F3, with declining molecular weights and increased hydroxyl contents. Lignin-g-PCLs are synthesized via ring-opening polymerization of ε-caprolactone with lignin and characterized by GPC, FTIR, 1 H and 31 P NMR, DSC, TGA, and iGC. The mechanical properties, UV barrier, and enzymatic biodegradability of the lignin-g-PCLs are evaluated. Results show that lignin with a higher molecular weight and aliphatic OH favors the copolymerization, leading to lignin-g-PCLs with longer PCL arms. Moreover, lignin incorporation improves the thermal stability, hydrophobicity, and UV-blocking ability but reduces the lipase hydrolyzability of the copolymers. We also demonstrated that the lignin-g-PCL-coated filter paper could successfully separate chloroform–, petroleum ether–, and hexane–water mixtures with an efficiency up to 99.2%. The separation efficiency remains above 90% even after 15 cycles. The structural differences of copolymers derived from the fractionation showed minimal influence on the separation efficiency. This work provides new insights into lignin-based copolymerization and the versatility of lignin valorization.
Strong Steric Hindrance Effect on Excited State Structural Dynamics of Cu(I) Diimine Complexes
Abstract not provided
End-Group-Induced Charge Transfer in Molecular Junctions: Effect on Electronic-Structure and Thermopower
Explore the source record for details and available documents.
Chapter 3. Understanding the Effects of Composition and Structure on the Oxygen Evolution Reaction (OER) Occurring on NiFeOx Catalysts. IN: Energy and Environment Series No. 22, Integrated Solar Fuel Generators
© The Royal Society of Chemistry 2019. Hydrogen produced by wind- or solar energy-driven electrochemical splitting of water could be used to store renewable electrical energy or to reduce biomass or CO2 to carbon-containing fuels. The potential required for the splitting of water is larger than the thermodynamic potential due to the insufficient activity of the catalysts required for the two half reactions involved in water splitting - the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER). The OER and HER occur at the anode and cathode, respectively, of the electrochemical cell. Since the overpotential for the OER can be nearly an order of magnitude larger than that for the HER, considerable attention has been devoted to finding and developing highly active OER catalysts, and in particular those based on earth-abundant elements. To date this goal has been best met with catalysts based on oxides and oxyhydroxides of Ni and Fe for alkaline electrolysis. This chapter reviews the current understanding of such catalysts and examines the role of catalyst synthesis method and percentage of Fe content on catalyst performance. Particular attention is given to the role of Fe3+ cations exchanged into the lattice of NiOOH in enhancing the OER activity of the host material. This issue is discussed from both experimental and theoretical perspectives with the aim of identifying how and why the additions of Fe3+ cations enhance catalyst performance. The chapter ends with a brief overview of recent efforts aimed at identifying elements other than Fe that can be added to Ni oxide to enhance its OER activity and elements that can be added to NiFe oxyhydroxides to further enhance their OER activity.
The effect of weighted averages when determining the speciation and structure–property relationships of europium( iii ) dipicolinate complexes
Europium( iii ) dipicolinate complexes have been a model system in lanthanide solution chemistry for decades, here it is investigated in unprecedented detail.
Computational design of thermoelectric alloys through optimization of transport and dopability
Alloying is a common technique to optimize the functional properties of materials for thermoelectrics, photovoltaics, energy storage etc. Designing thermoelectric (TE) alloys is especially challenging because it is a multi-property optimization problem, where the properties that contribute to high TE performance are interdependent. In this work, we develop a computational framework that combines first-principles calculations with alloy and point defect modeling to identify alloy compositions that optimize the electronic, thermal, and defect properties. We apply this framework to design n-type Ba 2(1–x) Sr 2x CdP 2 Zintl thermoelectric alloys. Our predictions of the crystallographic properties such as lattice parameters and site disorder are validated with experiments. To optimize the conduction band electronic structure, we perform band unfolding to sketch the effective band structures of alloys and find a range of compositions that facilitate band convergence and minimize alloy scattering of electrons. Here, we assess the n-type dopability of the alloys by extending the standard approach for computing point defect energetics in ordered structures. Through the application of this framework, we identify an optimal alloy composition range with the desired electronic and thermal transport properties, and n-type dopability. Such a computational framework can also be used to design alloys for other functional applications beyond TE.
Solvation and oxidation effects on the crystal structure and morphology of tetraoxolene-based materials
Owing to their rich redox behavior and strong metal chelating ability, tetraoxolene ligands have been established as one of the foundational building blocks for multifunctional metal–organic materials. Here, we show how simple and often overlooked synthetic parameters can be used to control the structures of transition metal and lanthanide-based metal–tetraoxolene materials across multiple length scales. Through the synthesis of twelve new compounds, we provide a comprehensive survey detailing how the choice of solvent, initial ligand redox state, and in situ oxidant impact the local coordination geometry and chain architecture, as well as the crystal size and shape (e.g., rods vs. platelets). This work represents an important step towards the synthesis of new metal–tetraoxolene materials with predictable architectures and, therefore, targeted functionality.
Compositional effects on the electronic structure of ZnSe 1-x S x ternary quantum dots
Here, we report first-principles density functional theory calculations of the electronic structure of ZnSe 1-x S x ternary quantum dots (TQDs) and the impact of composition and compositional distribution on the electron density distribution, electronic density of states, and band gap. We find that the band gaps for ZnSe/ZnS core/shell TQDs are nearly independent of the number of S atoms in the shell, whereas the presence of S in the core of alloyed TQDs modifies the electronic energy levels significantly. Finally, our results imply that distribution of S atoms can be used to achieve quantum confinement in different regions of the TQDs.
Substrate effect on the electronic structures of CuPc/graphene interfaces
The interfacial electronic structures of copper phthalocyanine (CuPc) deposited on a single-layer graphene (SLG) film prepared on Cu and SiO{sub 2} substrates (SLG/Cu and SLG/SiO{sub 2}) were investigated using ultraviolet photoelectron spectroscopy. The ionization energy of CuPc on SLG/Cu and SLG/SiO{sub 2} substrate is, respectively, 5.62 eV and 4.97 eV. The energy level alignments at the two interfaces were estimated. The results revealed that the height of the electron (hole) injection barriers are 1.20 (1.10) and 1.38 (0.92) eV at CuPc/SLG/Cu and CuPc/SLG/SiO{sub 2} interfaces, respectively.
Nanocrystalline-Si-dot multi-layers fabrication by chemical vapor deposition with H-plasma surface treatment and evaluation of structure and quantum confinement effects
100-nm-thick nanocrystalline silicon (nano-Si)-dot multi-layers on a Si substrate were fabricated by the sequential repetition of H-plasma surface treatment, chemical vapor deposition, and surface oxidation, for over 120 times. The diameter of the nano-Si dots was 5–6 nm, as confirmed by both the transmission electron microscopy and X-ray diffraction analysis. The annealing process was important to improve the crystallinity of the nano-Si dot. We investigated quantum confinement effects by Raman spectroscopy and photoluminescence (PL) measurements. Based on the experimental results, we simulated the Raman spectrum using a phenomenological model. Consequently, the strain induced in the nano-Si dots was estimated by comparing the experimental and simulated results. Taking the estimated strain value into consideration, the band gap modulation was measured, and the diameter of the nano-Si dots was calculated to be 5.6 nm by using PL. The relaxation of the q ∼ 0 selection rule model for the nano-Si dots is believed to be important to explain both the phenomena of peak broadening on the low-wavenumber side observed in Raman spectra and the blue shift observed in PL measurements.