Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
NASA NTRS2002

Phase Synchronization and Desynchronization of Structural Response Induced by Turbulent and External Sound

Acoustic and turbulent boundary layer flow loadings over a flexible structure are used to study the spatial-temporal dynamics of the response of the structure. The stability of the spatial synchronization and desynchronization by an active external force is investigated with an array of coupled transducers on the structure. In the synchronous state, the structural phase is locked, which leads to the formation of spatial patterns while the amplitude peaks exhibit chaotic behaviors. Large amplitude, spatially symmetric loading is superimposed on broadband, but in the desynchronized state, the spectrum broadens and the phase space is lost. The resulting pattern bears a striking resemblance to phase turbulence. The transition is achieved by using a low power external actuator to trigger broadband behaviors from the knowledge of the external acoustic load inducing synchronization. The changes are made favorably and efficiently to alter the frequency distribution of power, not the total power level. Before synchronization effects are seen, the panel response to the turbulent boundary layer loading is discontinuously spatio-temporally correlated. The stability develops from different competing wavelengths; the spatial scale is significantly shorter than when forced with the superimposed external sound. When the external sound level decreases and the synchronized phases are lost, changes in the character of the spectra can be linked to the occurrence of spatial phase transition. These changes can develop broadband response. Synchronized responses of fuselage structure panels have been observed in subsonic and supersonic aircraft; results from two flights tests are discussed.

Maestrello, Lucio↗
DOE OSTI2025

Impact of the isotope effect on divertor detachment and pedestal structure in DIII-D

Dedicated H-mode hydrogen experiments have been conducted at DIII-D and are compared to similar deuterium plasmas under a range of divertor conditions, revealing significant effects of the isotope mass on divertor and pedestal conditions. H-mode confinement is found to be systematically lower in hydrogen and experiences a worse degradation with increased fueling. This coincides with a higher ne,sep in hydrogen for similar fueling rates. When ne,ped is matched in hydrogen and deuterium as are the ne and Te pedestal structures, the target conditions deviate strongly from each other. An analysis of two major factors in the pedestal structure, pedestal stability and neutral fueling, shows they are not sufficient to explain either the pedestal differences between isotopes or the hydrogen pedestal structure respectively. An analysis of hydrogen and deuterium density ramps demonstrates a 20% higher ion current and a 30% higher upstream density at detachment onset in hydrogen. The characteristics of target heat flux and divertor radiation are shown to change significantly with the isotope mass in each divertor operational regime. The results shown here indicate divertor conditions trend with ion mass in a manner beneficial for divertor performance in future devices.

Mattes, Ray [Univ. of Tennessee, Knoxville, TN (Un↗
DOE OSTI2023

Crystal Structures of Diaryl Hydrazone and Sulfone Stabilizers in Complex with an Amyloidogenic Light Chain Reveal an Alternate Ligand‐Binding Cavity

Abstract Stabilization of amyloidogenic immunoglobulin light chains (LCs) by binding of small molecule “kinetic stabilizers” is under development as a novel treatment for light chain amyloidosis. From a high‐throughput screen, we previously identified 16 full‐length (FL) LC stabilizers from five distinct chemotypes. We then obtained structural biological information on two classes of hits, coumarins and hydantoins, revealing that both chemotypes bind to a pocket at the V L −V L interface of the FL LC dimer. Here, we report crystal structures of three screening hits from two other chemotypes, diaryl hydrazones and sulfones, in complex with an amyloidogenic FL LC. While two of these hits bind to the previously identified pocket, one diaryl hydrazone binds to a different pocket bisected by the C 2 symmetry axis of the dimer. These data further expand on the FL LC stabilizer‐binding surface that could be used in design of more potent FL LC aggregation inhibitors.

Chemistry↗
DOE OSTI2021

Atomistic Insights of Irreversible Li + Intercalation in MnO 2 Electrode

Tunnel-structured MnO 2 represents open-framed electrode materials for reversible energy storage. Its wide application is limited by its poor cycling stability, whose structural origin is unclear. We tracked the structure evolution of β-MnO 2 upon Li + ion insertion/extraction by combining advanced in situ diagnostic tools at both electrode level (synchrotron X-ray scattering) and single-particle level (transmission electron microscopy). The instability is found to originate from a partially reversible phase transition between β-MnO 2 and orthorhombic LiMnO 2 upon lithiation, causing cycling capacity decay. Moreover, the MnO 2 /LiMnO 2 interface exhibits multiple arrow-headed disordered regions, which severely chop into the host and undermine its structural integrity. Our findings could account for the cycling instability of tunnel-structured materials, based on which future strategies should focus on tuning the charge transport kinetics toward performance enhancement.

25 ENERGY STORAGE↗
DOE OSTI2019

Phase Control on Surface for the Stabilization of High Energy Cathode Materials of Lithium Ion Batteries

The development of high energy electrode materials for lithium ion batteries is challenged by their inherent instabilities, which become more aggravated as the energy densities continue to climb, accordingly causing increasing concerns on battery safety and reliability. Here, taking the high voltage cathode of LiNi 0.5 Mn 1.5 O 4 as an example, we demonstrate a protocol to stabilize this cathode through a systematic phase modulating on its particle surface. We are able to transfer the spinel surface into a 30 nm shell composed of two functional phases including a rock-salt one and a layered one. The former is electrochemically inert for surface stabilization while the latter is designated to provide necessary electrochemical activity. The precise synthesis control enables us to tune the ratio of these two phases, and achieve an optimized balance between improved stability against structural degradation without sacrificing its capacity. This study highlights the critical importance of well-tailored surface phase property for the cathode stabilization of high energy lithium ion batteries.

25 ENERGY STORAGE↗
NASA NTRS1989

Life without water

Anhydrobiosis, or life without water is commonly demonstrated by a number of plants and animals. These organisms have the capacity to loose all body water, remain dry for various periods, and then be revived by rehydration. While in the anhydrobiotic state, these organisms become highly resistant to several environmental stresses such as extremely low temperatures, elevated temperatures, ionizing radiation, and high vacuum. Since water is commonly thought to be essential for life, survival of anhydrobiotic organisms with an almost total loss of water is examined. A search of literature reveal that many anhydrobiotic organisms make large quantities of trehalose or other carbohydrates. Laboratory experiments have shown that trehalose is able to stabilize and preserve microsomes of sarcoplasmic reticulum and artificial liposomes. It was demonstrated that trehalose and other disaccharides can interact directly with phosopipid headgroups and maintain membranes in their native configuration by replacing water in the headgroup region. Recent studies show that trehalose is an effective stabilizer of proteins during drying and that it does so by direct interaction with groups on the protein. If life that is able to withstand environmental extremes has ever developed on Mars, it is expected that such life would have developed some protective compounds which can stabilize macromolecular structure in the absence of water and at cold temperatures. On Earth, that role appears to be filled by carbohydrates that can stabilize both membrane and protein stuctures during freezing and drying. By analog with terrestrial systems, such life forms might develop resistance either during some reproductive stage or at any time during adult existence. If the resistant form is a developmental stage, the life cycle of the organism must be completed with a reasonable time period relative to time when environmental conditions are favorable. This would suggest that simple organisms with a short life cycle might be most sucessful.

Crowe, Lois M.↗
NASA NTRS1990

Shape optimization for maximum stability and dynamic stiffness

Any optimization of structures for maximum stability or for maximum dynamic stiffness deals with an eigenvalue problem. The goal of this optimization is to raise the lowest eigenvalue (or eigenvalues) of the problem to its highest (optimal) level at a constant volume of the structure. Likely the lowest eigenvalue may be either inherently multi-modal or it can become multi-modal as a result of the optimization process. The multimodeness introduces some ambiguity to the eigenvalue problem and make the optimization difficult to handle. Thus far, only the simplest cases of multi-modal structures have been effectively optimized using rather elaborate analytical methods. Numerous publications report design of a minimum volume structure with different eigenvalues constraints, in which, however, the modality of the problem is assumed a priori. The method presented here utilizes a multi-modal optimality criteria and allows for inclusion of an arbitrary number of buckling or vibrations modes which might influence the optimization process. The real multi-modality of the problem, that is the number of modes participating in the final optimal design is determined iteratively. Because of a natural use of the FEM technique the method is easy to program and might be helpful in design of large flexible space structures.

Szyszkowski, W.↗
DOE OSTI2022

Land-based wind turbines with flexible rail-transportable blades – Part 2: 3D finite element design optimization of the rotor blades

Abstract. Increasing growth in land-based wind turbine blades to enable higher machine capacities and capacity factors is creating challenges in design, manufacturing, logistics, and operation. Enabling further blade growth will require technology innovation. An emerging solution to overcome logistics constraints is to segment the blades spanwise and chordwise, which is effective, but the additional field-assembled joints result in added mass and loads, as well as increased reliability concerns in operation. An alternative to this methodology is to design slender flexible blades that can be shipped on rail lines by flexing during transport. However, the increased flexibility is challenging to accommodate with a typical glass-fiber, upwind design. In a two-part paper series, several design options are evaluated to enable slender flexible blades: downwind machines, optimized carbon fiber, and active aerodynamic controls. Part 1 presents the system-level optimization of the rotor variants as compared to conventional and segmented baselines, with a low-fidelity representation of the blades. The present work, Part 2, supplements the system-level optimization in Part 1 with high-fidelity blade structural optimization to ensure that the designs are at feasible optima with respect to material strength and fatigue limits, as well as global stability and structural dynamics constraints. To accommodate the requirements of the design process, a new version of the Numerical Manufacturing And Design (NuMAD) code has been developed and released. The code now supports laminate-level blade optimization and an interface to the International Energy Agency Wind Task 37 blade ontology. Transporting long, flexible blades via controlled flapwise bending is found to be a viable approach for blades of up to 100 m. The results confirm that blade mass can be substantially reduced by going either to a downwind design or to a highly coned and tilted upwind design. A discussion of active and inactive constraints consisting of material rupture, fatigue damage, buckling, deflection, and resonant frequencies is presented. An analysis of driving load cases revealed that the downwind designs are dominated by loads from sudden, abrupt events like gusts rather than fatigue. Finally, an analysis of carbon fiber spar caps for downwind machines finds that, compared to typical carbon fibers, the use of a new heavy-tow carbon fiber in the spar caps is found to yield between 9 % and 13 % cost savings.

17 WIND ENERGY↗
NASA NTRS1987

Small Al clusters. II - Structure and binding in Al(n) (n = 2-6, 13)

The structure and stability of aluminum clusters containing up to six atoms have been studied using correlated wave functions and extended basis sets. The lowest energy structure is planar for Al4 and Al5, but three dimensional for Al6. The icosahedral, hcp, fcc, and two planar structures of Al13 were considered at the SCF level. The lowest energy structure is the icosahedron, but the planar structures are fairly low lying even in this case. A simplified description using two- and three-body interaction potentials is found to agree well with the ab initio structures and binding energies.

Pettersson, Lars G. M.↗
NASA NTRS1992

Advanced aeroservoelastic stabilization techniques for hypersonic flight vehicles

Advanced high performance vehicles, including Single-Stage-To-Orbit (SSTO) hypersonic flight vehicles, that are statically unstable, require higher bandwidth flight control systems to compensate for the instability resulting in interactions between the flight control system, the engine/propulsion dynamics, and the low frequency structural modes. Military specifications, such as MIL-F-9490D and MIL-F-87242, tend to limit treatment of structural modes to conventional gain stabilization techniques. The conventional gain stabilization techniques, however, introduce low frequency effective time delays which can be troublesome from a flying qualities standpoint. These time delays can be alleviated by appropriate blending of gain and phase stabilization techniques (referred to as Hybrid Phase Stabilization or HPS) for the low frequency structural modes. The potential of using HPS for compensating structural mode interaction was previously explored. It was shown that effective time delay was significantly reduced with the use of HPS; however, the HPS design was seen to have greater residual response than a conventional gain stablized design. Additional work performed to advance and refine the HPS design procedure, to further develop residual response metrics as a basis for alternative structural stability specifications, and to develop strategies for validating HPS design and specification concepts in manned simulation is presented. Stabilization design sensitivity to structural uncertainties and aircraft-centered requirements are also assessed.

Chan, Samuel Y.↗
DOE OSTI2021

Structural Manipulation of a Zirconocene-Based Porous Coordination Cage Using External and Host–Guest Stimuli

Porous coordination cages (PCCs) constructed from a zirconocene-based cluster have drawn great attention for their high stability and structural tunability. These features have enabled these cages to be utilized for a wide array of applications. Here this work demonstrates the structural flexibility and stimulus-responsive features of two interconvertible zirconocene-based PCCs. The subjects, PCC-20c (capsular) and PCC-20t (tetrahedral), are constructed from the same cluster and ligand but exhibit different shapes and properties. In the synthetic study of the cages, it is found that higher temperatures of synthesis yield PCC-20c in several different crystalline phases while lower temperatures of synthesis yield pure phase PCC-20t. Thermodynamic studies on the interconversion of the two cages show that the conversion from PCC-20t into PCC-20c is an entropically driven process and can be largely affected by the solvent environment. Additionally, the process of PCC-20t/c conversion can be mediated by the counter anions and light irradiation as evidenced by the change in equilibrium constants under these influences. The current studies are conducted to decipher how the PCC-20t/c phase can be controllably synthesized, interconverted, and their properties can be modified under the use of external stimuli: heat, light, and guest molecules.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Stability of Ligands on Nanoparticles Regulating the Integrity of Biological Membranes at the Nano–Lipid Interface

When nanoparticles interact with cellular or organelle membranes, the coating ligands are known to affect the integrity of the membranes, which regulate cell death and inflammation. However, the molecular mechanisms of this modulation remain unresolved. Here, we use synchrotron X-ray liquid surface scattering and molecular dynamics simulations to study interface structures between phospholipids and gold nanorods (AuNRs) coated by surfactant and polyelectrolyte. These ligands are two types of widely used surface modification with different self-assembled structures and stabilities on the surface of nanoparticles. We reveal distinct mechanisms of the ligand stability in disrupting membrane integrity. We find that cationic surfactant ligand cetyltrimethylammonium bromide (CTAB) detaches from AuNRs and inserts into phospholipids, resulting in reduced membrane thickness by compressing the phospholipids to align with the shorter ligand. Conversely, the cationic polyelectrolyte ligand poly(diallyldimethylammonium chloride) (PDC) is more stable on AuNRs; although it adsorbs onto the membrane, it does not cause much impairment. The distinct coating ligand interactions with phospholipids are further verified by cellular responses including impaired lysosomal membranes and triggered inflammatory effects in macrophages. Together, the quantitative analysis of interface structures elucidates key bio-nano interactions and highlights the importance of surface ligand stability for safety and rational design of nanoparticles.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Noncanonical folding of peptoid oligomers: Formation of a closed conformation in nonpolar solvent

Peptoids provide a versatile platform for foldamer design, yet their conformational behavior in low-dielectric media remains poorly understood. The structural characteristics of N-1-phenylethylglycine (Nspe) homo-oligomers were inves-tigated in chloroform, a solvent that mimics the interior of lipid bilayers, using nuclear magnetic resonance (NMR) spec-troscopy and molecular dynamics (MD) simulations. Nspe7 populated two distinct compact conformations, while Nspe10 adopted a single homogeneous conformation related to the previously reported Nspe9 threaded-loop structure. Integrated experimental and computational analysis reveals that these structures are stabilized by cooperative end-to-end intramo-lecular hydrogen bonding, cis-trans backbone isomerism, and hydrophobic side-chain shielding. The resulting structures minimize exposed polar surface area, demonstrating a closed conformation in the low-dielectric environment. These find-ings establish specific chain-length requirements for achieving well-defined closed conformations. This work provides insights into peptoid folding in nonpolar media, enabling rational design strategies for solvent-directed conformational switching systems.

Oh, Jinyoung↗
DOE OSTI2019

Ion-Specific Effects of Divalent Ions on the Structure of Polyelectrolyte Brushes

Polyelectrolyte brushes consist of charged polymer chains attached on one end to a surface at high densities. They are relevant for many practical applications ranging from biosensors to drug delivery to colloidal stability. Their structure and functionality can be dramatically influenced by multivalent counterions in the solution environment. In this work, the surface forces apparatus (SFA) and atomic force microscopy (AFM) were used to investigate the effects of three alkaline earth divalent cations, Mg 2+ , Ca 2+ , and Ba 2+ , on the structures of polystyrenesulfonate (PSS) brushes tethered to mica and silicon oxide surfaces. While all these ions caused significant shrinkage of the height of the PSS brushes, strong ion-specific effects were observed. Mg 2+ and C 2+ , caused homogeneous shrinkage; Ba 2+ led to pinned-micelle like inhomogeneous structures. Isothermal titration calorimetry (ITC) demonstrated that this ion specificity was mainly caused by the difference in binding energy between sulfonate groups and the divalent cations. Considering the abundance of divalent cations in industrial processes, natural environments, and biological systems, the understanding of strong ion-specific effects of divalent counterions is of great importance for theoretical studies and various applications involving polyelectrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Zinc-Stabilized Manganese Telluride with Wurtzite Crystal Structure

Alloying of semiconductors with similar crystal structures is often used to fine-tune materials properties for optoelectronic applications. However, examples of semiconductor alloys between compounds with two different crystal structures, where properties are changing dramatically as a function of composition, are much rarer. Even more unusual are such heterostructural alloys where the structure and properties can be changed with only a small amount of substitution (<10%). One exception is yttria-stabilized zirconia (YSZ) with cubic fluorite crystal structure, used for a wide range of applications. Here, we report on experimental observation of such unusual behavior in zinc-stabilized manganese telluride (ZSMT), and on theoretical explanation of its compositional stabilization in the wurtzite crystal structure. Thin films of Mn 1-x Zn x Te alloys synthesized at 400 degrees C change from the nickeline (NC) to the wurtzite (WZ) crystal structure at x as low as 0.08. Theoretical calculations indicate that this structural transition occurs due to small MnTe polymorph energy differences, and strong preference of Zn atoms to adopt tetrahedral vs octahedral coordination environment. The calculated 1 eV increase of the band gap from NC to WZ structure is consistent with the experimental measurements on ZSMT films. These measurements also indicate 1000-10,000 times lower conductivity than the nickeline MnTe, due to low ZSMT hole concentration. Overall, the wide band gap and low hole density make ZSMT a promising candidate for p-type transparent transistors and other optoelectronic applications.

36 MATERIALS SCIENCE↗