Search NASA⌕ Search

SEARCH · Search NASA

Results for “Surface Modification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Tuning the surface reactivity of oxides by peroxide species

The Mars–van Krevelen mechanism is the foundation for oxide-catalyzed oxidation reactions and relies on spatiotemporally separated redox steps. Herein, we demonstrate the tunability of this separation with peroxide species formed by excessively adsorbed oxygen, thereby modifying the catalytic activity and selectivity of the oxide. Using CuO as an example, we show that a surface layer of peroxide species acts as a promotor to significantly enhance CuO reducibility in favor of H 2 oxidation but conversely as an inhibitor to suppress CuO reduction against CO oxidation. Together with atomistic modeling, we identify that this opposite effect of the peroxide on the two oxidation reactions stems from its modification on coordinately unsaturated sites of the oxide surface. By differentiating the chemical functionality between lattice oxygen and peroxide, these results are closely relevant to a wide range of catalytic oxidation reactions using excessively adsorbed oxygen to activate lattice oxygen and tune the activity and selectivity of redox sites.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Hybrid Graphene Ribbon/Carbon Electrodes for High‐Performance Energy Storage

Abstract The utility of supercapacitors for both fixed and portable energy storage would be greatly enhanced if their energy density could be increased while maintaining their high power density, fast charging time, and low cost. This study describes a simple, solution‐phase, scalable modification of carbon materials by a covalently bonded “brush” of hydrogen‐terminated graphene ribbons (GRs) with layer thicknesses of 2–20 nm, resulting in a 20–100 times increase in the areal capacitance of the unmodified electrode surface. On a flat sp 2 carbon surface modified by GRs, the capacitance exceeds 1200 µF cm −2 in 0.1 m H 2 SO 4 due to a distinct type of pseudocapacitance during constant current charge/discharge cycling. Modification of high surface area carbon black electrodes with GRs yields capacitances of 950–1890 F g −1 , power densities >40 W g −1 , and minimal change in capacitance during 1500 charge/discharge cycles at 20 A g −1 . A capacitance of 1890 F g −1 affords an energy density of 318 Wh kg −1 operating at 1.1 V and 590 Wh kg −1 at 1.5 V. The projected energy density of a hybrid GR/carbon supercapacitor greatly exceeds the current 10 Wh kg −1 for commercial supercapacitors and approaches that of lithium ion batteries.

Farquhar, Anna K.↗
DOE OSTI2014

Reconfigurable modified surface layers using plasma capillaries around the neutral inclusion regime

We show both theoretically and experimentally reconfigurable properties achieved by plasma inclusions placed in modified surface layers generally used to tailor the transmission and beaming properties of electromagnetic bandgap based waveguiding structures. A proper parametrization of the plasma capillaries allows to reach the neutral inclusion regime, where the inclusions appear to be electromagnetically transparent, letting the surface mode characteristics unaltered. Varying the electron density of the plasma inclusions provoques small perturbations around this peculiar regime, and we observe significant modifications of the transmission/beaming properties. This offers a way to dynamically select the enhanced transmission frequency or to modify the radiation pattern of the structure, depending on whether the modified surface layer is placed at the entrance/exit of the waveguide.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Chemical structure–property relationships in nanocelluloses

Abstract Nanocelluloses, nanoscale cellulosic particles or fibrils, are an appealing class of nanomaterials with enormous potential for sustainable development. They have great promise to target some of the 17 Sustainable Development Goals outlined by the United Nations. Nanocelluloses are derived from the most abundant biopolymer in the world, cellulose, which have multiple hydroxyl groups on their surface, enabling a vast range of chemical modifications. The interplay between the chemical structure and physicochemical properties of nanocelluloses is crucial to engineering the next generation of green, functional nanomaterials. In this review paper, we provide a comprehensive account of the structure–property relationships in nanocelluloses, which may establish the basis for the design of precision bio‐based materials. Chemical modifications of nanocelluloses, including hydrolysis, oxidation, esterification, amidation, and polymer grafting, provide an array of chemical and physical properties that open opportunities in a diverse spectrum of applications. We review how chemical modifications affect the physicochemical properties of nanocelluloses, such as thermal stability, hydrophobicity, and dispersibility in nonpolar media. Understanding nanocellulose chemical structure–property relationships is integral to the development of sustainable material platforms based on the most renewable biopolymer on earth.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Novel nucleocytoplasmic protein O -fucosylation by SPINDLY regulates diverse developmental processes in plants

Here, in metazoans, protein O-fucosylation of Ser/Thr residues was only found in secreted or cell surface proteins, and this post-translational modification is catalyzed by ER-localized protein O-fucosyltransferases (POFUTs) in the GT65 family. Recently, a novel nucleocytoplasmic POFUT, SPINDLY (SPY), was identified in the reference plant Arabidopsis thaliana to modify nuclear transcription regulators DELLAs, revealing a new regulatory mechanism for gene expression. The paralog of AtSPY, SECRET AGENT (SEC), is an O-link-N-acetylglucosamine (GlcNAc) transferase (OGT), which O-GlcNAcylates Ser/Thr residues of target proteins. Both AtSPY and AtSEC are tetratricopeptide repeat-domain-containing glycosyltransferases in the GT41 family. The discovery that AtSPY is a POFUT clarified decades of miss-classification of AtSPY as an OGT. SPY and SEC play pleiotropic roles in plant development, and the interactions between SPY and SEC are complex. SPY-like genes are conserved in diverse organisms, except in fungi and metazoans, suggesting that O-fucosylation is a common mechanism in modulating intracellular protein functions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

A family of tubular pili from harmful algal bloom forming cyanobacterium Microcystis aeruginosa

Cyanobacteria are vital photosynthetic prokaryotes, but some form harmful algal blooms (cyanoHABs) that disrupt ecosystems and produce toxins. The mechanisms by which these blooms form have yet to be fully understood, particularly the role of extracellular components. Here, we present a 2.4 Å cryo-EM structure of a pilus, termed the cyanobacterial tubular (CT) pilus, found in the cyanoHAB-forming Microcystis aeruginosa. The pilin exhibits a unique protein fold, forming a tubular pilus structure with tight, double-layer anti-parallel β-sheet interactions. We show that CT pili are essential for buoyancy by facilitating the formation of micro-colonies, which increases drag force and prevents sinking. The CT pilus surface is heavily glycosylated with ten monosaccharide modifications per pilin. Furthermore, CT pili can enrich microcystin, potentially enhancing cellular resilience, and co-localize with iron-enriched extracellular matrix components. Thus, we propose that this pilus plays an important role in the proliferation of cyanoHABs. This just discovered pilus family appears to be widely distributed across several cyanobacterial orders. Our structural and functional characterization of CT pili provide insights into cyanobacterial cell morphology, physiology, and toxin interactions, and identify potential targets for disrupting bloom formation.

Cryoelectron microscopy↗
DOE OSTI2015

Transmission electron microscopy studying of structural features of NiTi B2 phase formed under pulsed electron-beam impact

By transmission electron microscopy method the evolution of structural-phase states on a depth of close to equiatomic NiTi modified layer has been studied. Modification performed by pulse impact on its surface low-energy high-current electron beam (beam energy density 10 J/sm{sup 2}, 10 pulses, pulse duration 50mks). It is established that during the treatment in the layer thickness of 8–10 μm, the melting of primary B2 phase and contained therein as Ti2Ni phase particles occurs. The result is change in the concentration ratio of titanium and nickel in the direction of increasing titanium content, which was confirmed by X-ray analysis in the form of increased unit cell parameter B2 phase. Analysis of the electron diffraction pattern showed that the modified layer is characterized as a highly distorted structure on the basis of bcc lattice. Lattice distortions are maximal near the surface and extends to a depth of melt. In subjacent layer there is gradual decline lattice distortions is observed.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Epitaxial growth and thermodynamic stability of SrIrO{sub 3}/SrTiO{sub 3} heterostructures

Obtaining high-quality thin films of 5d transition metal oxides is essential to explore the exotic semimetallic and topological phases predicted to arise from the combination of strong electron correlations and spin-orbit coupling. Here, we show that the transport properties of SrIrO{sub 3} thin films, grown by pulsed laser deposition, can be optimized by considering the effect of laser-induced modification of the SrIrO{sub 3} target surface. We further demonstrate that bare SrIrO{sub 3} thin films are subject to degradation in air and are highly sensitive to lithographic processing. A crystalline SrTiO{sub 3} cap layer deposited in-situ is effective in preserving the film quality, allowing us to measure metallic transport behavior in films with thicknesses down to 4 unit cells. In addition, the SrTiO{sub 3} encapsulation enables the fabrication of devices such as Hall bars without altering the film properties, allowing precise (magneto)transport measurements on micro- and nanoscale devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

A master equation simulation for the • OH + CH 3 OH reaction

A combined (fixed-J) two-dimensional master-equation / semi-classical transition state theory / variational Rice-Ramsperger-Kassel-Marcus (2DME/SCTST/vRRKM) approach has been used to compute reaction rate coefficients of •OH with CH 3 OH over a wide range of temperatures (10 - 2500 K) and pressures (10 -1 -10 4 Torr) based on a potential energy surface that has been constructed using a modification of the HEAT thermochemical protocol. The calculated results show that the title reaction is nearly pressure-independent when T > 250 K, but depends strongly on pressure at lower temperatures. Also, the preferred mechanism and rate constants are found to be very sensitive to temperature. The reaction pathway CH 3 OH + • OH → CH 3 O • + H 2 O proceeds exclusively through tunneling at exceedingly low temperatures (T ≤50 K) typical of those established in interstellar environments. In this regime, the rate constant is found to increase with decreasing temperature, which agrees with low-temperature experimental results. The thermodynamically favored reaction pathway CH 3 OH + • OH → • CH 2 OH + H 2 O becomes dominant at higher temperatures (T ≥ 200 K), such as those found in Earth’s atmosphere as well as combustion environments. By modifying the ab initio barrier heights slightly, experimental rate constants from 200 to 1250 K can be satisfactorily reproduced.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

TU-H-CAMPUS-JeP2-05: Can Automatic Delineation of Cardiac Substructures On Noncontrast CT Be Used for Cardiac Toxicity Analysis?

Purpose: To evaluate the feasibility of using an automatic segmentation tool to delineate cardiac substructures from computed tomography (CT) images for cardiac toxicity analysis for non-small cell lung cancer (NSCLC) patients after radiotherapy. Methods: A multi-atlas segmentation tool developed in-house was used to delineate eleven cardiac substructures including the whole heart, four heart chambers, and six greater vessels automatically from the averaged 4DCT planning images for 49 NSCLC patients. The automatic segmented contours were edited appropriately by two experienced radiation oncologists. The modified contours were compared with the auto-segmented contours using Dice similarity coefficient (DSC) and mean surface distance (MSD) to evaluate how much modification was needed. In addition, the dose volume histogram (DVH) of the modified contours were compared with that of the auto-segmented contours to evaluate the dosimetric difference between modified and auto-segmented contours. Results: Of the eleven structures, the averaged DSC values ranged from 0.73 ± 0.08 to 0.95 ± 0.04 and the averaged MSD values ranged from 1.3 ± 0.6 mm to 2.9 ± 5.1mm for the 49 patients. Overall, the modification is small. The pulmonary vein (PV) and the inferior vena cava required the most modifications. The V30 (volume receiving 30 Gy or above) for the whole heart and the mean dose to the whole heart and four heart chambers did not show statistically significant difference between modified and auto-segmented contours. The maximum dose to the greater vessels did not show statistically significant difference except for the PV. Conclusion: The automatic segmentation of the cardiac substructures did not require substantial modification. The dosimetric evaluation showed no statistically significant difference between auto-segmented and modified contours except for the PV, which suggests that auto-segmented contours for the cardiac dose response study are feasible in the clinical practice with a minor modification to the PV vessel.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2015

Atomistic Structure, Strength, and Kinetic Properties of Intergranular Films in Ceramics

Intergranular films (IGFs) present in polycrystalline oxide and nitride ceramics provide an excellent example of nanoconfined glasses that occupy only a small volume percentage of the bulk ceramic, but can significantly influence various mechanical, thermal, chemical, and optical properties. By employing molecular dynamics computer simulations, we have been able to predict structures and the locations of atoms at the crystal/IGF interface that were subsequently verified with the newest electron microscopies. Modification of the chemistry of the crystal surface in the simulations provided the necessary mechanism for adsorption of specific rare earth ions from the IGF in the liquid state to the crystal surface. Such results had eluded other computational approaches such as ab-initio calculations because of the need to include not only the modified chemistry of the crystal surfaces but also an accurate description of the adjoining glassy IGF. This segregation of certain ions from the IGF to the crystal caused changes in the local chemistry of the IGF that affected fracture behavior in the simulations. Additional work with the rare earth ions La and Lu in the silicon oxynitride IGFs showed the mechanisms for their different affects on crystal growth, even though both types of ions are seen adhering to a bounding crystal surface that would normally imply equivalent affects on grain growth.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Structure and Voltage Recovery Driven by Defects Elimination in Li-Rich Layered Oxide Cathode Materials

Lithium-ion batteries (LIBs) are ubiquitous in a wide range of technologies, including cell phones, electric vehicles, and energy grid, and are indispensable in the transition toward sustainable energy technology. The battery performance is inherently connected to the capability of lithium ions to reversibly intercalate with the electrodes. The capacity of classical layered transition metal (TM) oxides, the primary commercial cathode materials, is limited to cationic redox activity. Anionic redox has thus emerged as a new paradigm for designing novel cathodes for next generation LIBs. It is recently confirmed oxygen redox in lithium-rich layered oxides (LRLO) with composition xLi 2 MnO 3 ∙(1-x)LiTMO 2 , which enables this group of materials exhibit reversible capacities exceeding 280 mAh g -1 . Unfortunately, this material undergoes voltage fading and instability that is rooted in irreversible structural transformation in terms of defects formation including lithium and oxygen vacancies, lithium tetrahedron, TM migration, edge dislocations, stacking fault, and local strain. Modification methods including morphology control, composition gradient, surface treatment, foreign elements doping, etc., have been proposed in the literatures to mitigate the defects formation and maintain the structure reversibility. Despite their improvement, the intrinsic voltage fading is still inevitable and remains a challenge that will require considerable effort to overcome. In this work, we demonstrate a path to recover the layer structure and working voltage through high-temperature annealing. The treatment at high temperature recovers the local Li-excess environments around oxygen, oxygen stacking sequence, and eliminates microstrain associated with different defects. As a result, the voltage profile once more shows plateau region during charge and the average discharge voltage is restored of the cycled cathode after heat treatment. Both theoretical calculations and experimental characterizations illustrate the mechanisms underlying the heating induced recovery. The structure metastability and defects removal are decisive in structure and voltage recovery of LRLO cathode material.

Zhang, Minghao↗
DOE OSTI2019

Artifacts from manganese reduction in rock samples prepared by focused ion beam (FIB) slicing for X-ray microspectroscopy

The spatial distribution oftransition metal valence states is of broad interest in the microanalysis ofgeological and environmental samples. An example is rock varnish, a naturalmanganese (Mn)-rich rock coating, whose genesis mechanism remains a subjectof scientific debate. We conducted scanning transmission X-ray microscopywith near-edge X-ray absorption fine-structure spectroscopy (STXM-NEXAFS)measurements of the abundance and spatial distribution of different Mnoxidation states within the nano- to micrometer thick varnish crusts. Suchmicroanalytical measurements of thin and hard rock crusts require samplepreparation with minimal contamination risk. Focused ion beam (FIB) slicingwas used to obtain ~100–1000 nm thin wedge-shaped slices of thesamples for STXM, using standard parameters. Yet, while this preparationis suitable for investigating element distributions and structures in rocksamples, we observed artifactual modifications of the Mn oxidation states atthe surfaces of the FIB slices. Our results imply that the preparationcauses a reduction of Mn 4+ to Mn 2+ . We draw attention tothis issue, since FIB slicing, scanning electron microscopy (SEM) imaging,and other preparation and visualization techniques operating in thekilo-electron-volt range are well-established in geosciences, but researchersare often unaware of the potential for the reduction of Mn and possibly otherelements in the samples.

58 GEOSCIENCES↗
DOE OSTI2020

Localization and reduction of superconducting quantum coherent circuit losses

Quantum sensing and computation can be realized with superconducting microwave circuits. Qubits are engineered quantum systems of capacitors and inductors with non-linear Josephson junctions. They operate in the single-excitation quantum regime, photons of $27 \mu$eV at 6.5 GHz. Quantum coherence is fundamentally limited by materials defects, in particular atomic-scale parasitic two-level systems (TLS) in amorphous dielectrics at circuit interfaces.[1] The electric fields driving oscillating charges in quantum circuits resonantly couple to TLS, producing phase noise and dissipation. We use coplanar niobium-on-silicon superconducting resonators to probe decoherence in quantum circuits. By selectively modifying interface dielectrics, we show that most TLS losses come from the silicon surface oxide, and most non-TLS losses are distributed throughout the niobium surface oxide. Through post-fabrication interface modification we reduced TLS losses by 85% and non-TLS losses by 72%, obtaining record single-photon resonator quality factors above 5 million and approaching a regime where non-TLS losses are dominant. [1]M\"uller, C., Cole, J. H. & Lisenfeld, J. Towards understanding two-level-systems in amorphous solids: insights from quantum circuits. Rep. Prog. Phys. 82, 124501 (2019)

Altoé, M Virginia P↗
DOE OSTI2016

Enhanced flashover strength in polyethylene nanodielectrics by secondary electron emission modification

This work studies the correlation between secondary electron emission (SEE) characteristics and impulse surface flashover in polyethylene nanodielectrics both theoretically and experimentally, and illustrates the enhancement of flashover voltage in low-density polyethylene (LDPE) through incorporating Al{sub 2}O{sub 3} nanoparticles. SEE characteristics play key roles in surface charging and gas desorption during surface flashover. This work demonstrates that the presence of Al{sub 2}O{sub 3} nanoparticles decreases the SEE coefficient of LDPE and enhances the impact energy at the equilibrium state of surface charging. These changes can be explained by the increase of surface roughness and of surface ionization energy, and the strong interaction between nanoparticles and the polymer dielectric matrix. The surface charge and flashover voltage are calculated according to the secondary electron emission avalanche (SEEA) model, which reveals that the positive surface charges are reduced near the cathode triple point, while the presence of more nanoparticles in high loading samples enhances the gas desorption. Consequently, the surface flashover performance of LDPE/Al{sub 2}O{sub 3} nanodielectrics is improved.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Disordered TiO x –SiO x Nanocatalysts Using Bioinspired Synthetic Routes

Metal oxide nanomaterials have increasing significance and broad applications in catalysis, ranging from support materials to active catalysts. Here, we have demonstrated a facile synthetic strategy to create disordered, high-surface-area metal oxide nanomaterials using biomineralization-inspired methods. Using protamine as a protein template, a range of TiO x –SiO x nanomaterials were synthesized and implemented for catalytic CO 2 thermal reduction reactions. The modularity of synthetic options afforded via biomineralization enables increases in surface area, which are ideally suited for subsequent modification to regulate catalytic performance. All materials were thoroughly characterized using a suite of synchrotron scattering and spectroscopic methods. Through these techniques, we have demonstrated that protamine-induced biomineralization results in largely disordered materials with changes in the local atomic structure dependent on the applied synthetic conditions. Protamine removal with treatment under acidic conditions greatly increased material surface area while causing measurable changes in the structure as revealed by X-ray absorption spectroscopy. Upon subsequent hydrogenation, Ti- and Si-based defects were induced in the materials while the disordered nature of the material was still largely retained. Furthermore, we found that the incorporation of Si into TiO x was able to mitigate the known anatase to rutile phase change during the reaction while stabilizing the defect sites. The synthetic strategies described in this work are expected to be translatable to other metal oxide nanomaterial chemical structures, providing a means to control catalytic properties using benign synthetic strategies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

An inconsistency in the standard maximum likelihood estimation of bulk flows

Maximum likelihood estimation of the bulk flow from radial peculiar motions of galaxies generally assumes a constant velocity field inside the survey volume. This assumption is inconsistent with the definition of bulk flow as the average of the peculiar velocity field over the relevant volume. This follows from a straightforward mathematical relation between the bulk flow of a sphere and the velocity potential on its surface. This inconsistency also exists for ideal data with exact radial velocities and full spatial coverage. Based on the same relation, we propose a simple modification to correct for this inconsistency.

79 ASTRONOMY AND ASTROPHYSICS↗