Search NASA⌕ Search

SEARCH · Search NASA

Results for “Unity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

The effect of a visual/motion display mismatch in a single axis compensatory tracking task

The frequency response of visual systems is typically unity from 0 to 20 rad/sec, while that of motion systems typically falls off in the vicinity of 6 rad/sec. The question arises as to what effect, if any, such a difference in servomechanism performance has on the simulation. Is pilot performance reduced by the conflict between displays? Would a more realistic simulation occur if the visual servomechanisms were degraded to match the motion servomechanisms? Does the pilot need and use the higher frequency information present in the visual display? The purpose of the experiment is to take a step forward toward answering these questions. Work already in the literature which bears on these questions is outlined. A description is then given of an experiment used to check for the effects of a difference in the performance of the visual and motion servomechanisms (the experiment uses a single-axis, compensatory, roll-tracking task). The results of the experiment are then presented and analyzed.

Shirachi, D. K.↗

The friction and wear of metals and binary alloys in contact with an abrasive grit of single-crystal silicon carbide

Sliding friction experiments were conducted with various metals and iron-base binary alloys (alloying elements Ti, Cr, Mn, Ni, Rh and W) in contact with single crystal silicon carbide riders. Results indicate that the friction force in the plowing of metal and the groove height (corresponding to the wear volume of the groove) decrease linearly as the shear strength of the bulk metal increases. The coefficient of friction and groove height generally decrease, and the contact pressure increases with an increase in solute content of binary alloys. There appears to be very good correlation of the solute to iron atomic ratio with the decreasing rate of change of coefficient of friction, the decreasing rate of change of groove height and the increasing rate of change of contact pressure with increasing solute content. These rates of change increase as the solute to iron atomic radius ratio increases or decreases from unity.

Miyoshi, K.↗

Growth of silicon carbide crystals on a seed while pulling silicon crystals from a melt

A saturated solution of silicon and an element such as carbon having a segregation coefficient less than unity is formed by placing a solid piece of carbon in a body of molten silicon having a temperature differential decreasing toward the surface. A silicon carbide seed crystal is disposed on a holder beneath the surface of the molten silicon. As a rod or ribbon of silicon is slowly pulled from the melt, a supersaturated solution of carbon in silicon is formed in the vicinity of the seed crystal. Excess carbon is emitted from the solution in the form of silicon carbide which crystallizes on the seed crystal held in the cool region of the melt.

Ciszek, T. F.↗

Prediction of ion drift effects on spacecraft floating potentials

The plasma environment of high altitude spacecraft was observed to involve ion drift velocities which sometimes become comparable to ion mean thermal speeds. Such drifts may cause an electrically isolated spacecraft surface to float at a substantially increased negative potential if it is simultaneously shaded and downstream relative to the drift direction. The results showed that: (1) the ion speed ratio at which drift effects become important (i.e. change the floating potential by at least 10 percent) can be as low as 0.1, and may be decreased if the ambient electrons are non-Maxwellian; (2) the effects of ion speed ratio increase with increasing ion-to-electron temperature ratio; and (3) negative floating potentials for drifting Maxwellian ion velocity distributions with speed ratio unity are typically about twice as large as the corresponding potentials for nondrifting conditions.

Chang, J. S.↗

Antenna feedhorn software upgrade

The HYBRIDHORN computer program was developed to serve as an item of general purpose antenna feedhorn design and analysis software. The formulation contains a small flare angle approximation which is subject to question for designs such as the S- and X-band feedhorn. Additionally, the original formulation did not allow azimuthal variation indexes other than unity. The HYBRIDHORN program was upgraded to correct both of these deficiencies. A large flare angle formulation was found. In the upgrade, all of the major program elements were converted to Univac 1108 compatible structured FORTRAN (SFTRAN) for ease of software maintenance. The small and large angle formulations are described and sample numerical results are presented.

Potter, P. D.↗

Winston Solar Concentrators and Evaluation Support. Phase 2: Non-imaging Concentrators for Space Applications

A 4.67X, plus or minus 5 deg. compound parabolic concentrator (CPC) for a large photovoltaic array in space was analyzed. The design was demonstrated to be effective in achieving a net power gain which can be varied from more than a factor of 3 down to approximately unity. A method for reducing nonuniformities in illumination to a given desired level was found. The effectiveness of this method, which involves the introduction of a degree of non-specularity in the reflector surface, was confirmed by direct measurements with prepared foil reflectors in a CPC in terrestrial sunshine as well as by computer ray tracing. Further ray tracing confirms that the CPC design is extremely tolerant to pointing and alignment errors, minor distortions, etc. A two stage non-imaging design was shown, by preliminary measurements and analysis, to provide both the desired angular tolerance and the required degree of intensity uniformity if higher concentrations (4X-10X) are necessary.

Winston, R.↗

The convection electric field model for the magnetosphere based on Explorer 45 observations

Large-scale electric fields in the magnetosphere, represented by the scalar potentials of corotation and convection fields, are examined in order to interpret both plasmapause positions at different local times and energetic particle penetrations inside the plasmapause observed by the Explorer 45 (S3-A) dc E field measurements and particle detectors. The Volland-Stern type convection electric field is assumed. A uniform dawn-dusk convection electric field which corresponds to an exponent (gamma) of unity is not consistent with the observational data, but the Volland-Stern model with gamma = 2 more likely represents the convection electric field during the hours of electric field increases during magnetic activity. In the time-independent case, the shape of the plasmapause does not depend on the intensity of the convection electric field, so that by using two plasmapause distances at different local times along the S3 outbound and inbound orbits the shape factor gamma of the convection field could be determined. The average value of gamma for 42 cases was found to be 2.4.

Ejiri, M.↗

The solar power satellite concept evaluation program

The paper describes in detail one of the preliminary baseline concepts for the solar power satellite (SPS). A large space freighter with payload capacity of 424 metric tons will deliver the material to a construction base in low earth orbit where the eight modules of the satellite are constructed. Electric thrusters will propel the modules to a smaller geosynchronous base, where the modules are docked and the solar arrays are deployed to form a satellite capable of providing 5 GW power from each of two end-mounted antennas to the two ground rectennas. The solar array is 5.3 km by 21.3 km to provide a total platform area of 113 sq km. The solar array employs silicon solar cells with a concentration ratio of unity. Details on transportation, construction bases, rectenna, and solar array design are given along with material requirements and cost estimates.

Piland, R. O.↗

Inversion of data from diffraction-limited multiwavelength remote sensors. I - Linear case

The remote sensing inverse problem is considered in which the sensor does not necessarily view the same area on the earth at each wavelength, and spatial correlations of the geophysical parameters may be present. Under the conditions of linearity and stationary statistics, the minimum mean-square error solution to the problem of inverting such data is a spatial filter of the Wiener-Kolmogorov class. The resulting remote-sensing system can be characterized by an impulse response matrix in ordinary space or by a transfer matrix in frequency space. A signal-to-noise matrix for the geophysical parameters to be sensed is also defined; this matrix depends on the postulated a priori statistics and on the characteristics of the remote-sensing instrument. The system transfer matrix and the signal-to-noise matrix are simultaneously diagonalizable. The optimum transfer matrix filters out of the estimate vector those eigenparameters for which eigenvalues of the signal-to-noise matrix are less than unity.

Rosenkranz, P. W.↗

Io - An intense brightening near 5 micrometers

Spectrophotometric observations of the Jovian satellite Io on February 20 and 21, 1978, (Universal Time) were made from 1.2 to 5.4 micrometers. Io's brightness at 4.7 to 5.4 micrometers was found to be three to five times greater at an orbital phase angle of 68 deg than at orbital phase angles of 23 deg (5.5 hours before the brightening) and 240 deg (20 hours after the brightening). Since the 5-micrometer albedo of Io is near unity under ordinary conditions, the observed transient phenomenon must have been the result of an emission mechanism. Although several such mechanisms were examined, the actual choice is not clear.

Witteborn, F. C.↗

The near-wake structure of the Atmosphere Explorer C /AE-C/ satellite - A parametric investigation

Measurements of ion current, electron temperature, and values of space potential obtained from the cylindrical electrostatic probe on board the Atmosphere Explorer C (AE-C) satellite were used to examine, in a parametric manner, the angular distribution of charge around the satellite. Interest is focused on nighttime equatorial data in the altitude range 275-620 km, which yields a wide range for the parameter R sub D (the radius of the satellite divided by the ambient value of the Debye lengths), including R sub D greater than 100, which is of practical significance to large space platforms. The variations of normalized ion current in the wake zone of the AE-C satellite appear to display an exponential dependence on R sub D for 'constant' values of other relevant parameters. The angular variations of electron temperature and space potential in the close vicinity of the satellite's surface were examined and compared with results from the Explorer 31 satellite. The variation of the ratio of measured to computed space potential with electron temperature was examined using data from both the AE-C and Explorer 31 satellites. It was found that the ratio is greater than unity. Possible causes for the above inequality are discussed.

Samir, U.↗

The radius and albedo of Hyperion

A measurement of the 20-micron thermal flux from Hyperion is reported, and the radius and surface geometric albedo of this outer satellite of Saturn are computed by the photometric/radiometric method. A corrected and normalized 20-micron thermal flux of 0.033 + or - 0.012 Jy is determined. A radius of 112 + or - 15 km and a surface geometric albedo of 0.47 + or - 0.11 are obtained by assuming values of unity for the phase integral, emissivity, and bolometric/visual geometric-albedo ratio. The sensitivity of the photometric/radiometric method to the assumed values of the parameters involved is discussed, and the results are compared with similar studies of Triton. It is concluded that neither Hyperion nor Triton appears to have a geometric albedo in the lower end of the distribution of small bodies in the solar system.

Cruikshank, D. P.↗

The emission-line spectrum of 3C 48

The spectrum and absolute energy distribution of the quasar 3C 48 are analyzed, yielding the following results. The forbidden lines are blueshifted with respect to the permitted lines by 600 km/s. The Balmer lines can be decomposed into a narrow and a broad component, with the narrow component having the redshift of the forbidden lines. The Mg II profile fits well the broad components of H-beta and H-gamma along with the Fe II profiles, and the forbidden O II profile fits well the profiles of forbidden O III and higher-ionization forbidden lines. The spatial coverage in the broad-line region is large, ranging from 0.1 to 0.4, and the optical depth at the Lyman limit is much greater than unity; the electron density is greater than 10 million per cu cm. The forbidden-line region has a lower density (less than 1 million per cu cm) and is subdivided into a low-excitation (forbidden O II) and high-excitation (forbidden O III) zone. The helium abundance appears to be normal.

Thuan, T. X.↗

The growth of aspherical structure in the universe - Is the Local Supercluster an unusual system

The growth and subsequent collapse of homogeneous ellipsoidal perturbations in a uniform expanding background is considered as a simple model for the formation of large-scale aspherical structures in the observed universe. Numerical calculations of the evolution of such perturbations turn out to be well described by an approximate analytic solution of the equations of motion, and simple relationships are found between the initial shape of a perturbation and its shape and kinematic properties at the time of collapse. Perturbations do not change their shape significantly until they reach a density contrast of order unity. As a result, structures with the kinematic properties of the Local Supercluster should form much more commonly in a low-density universe than in a flat universe. The homogeneity of the local Hubble flow, the motion of the Milky Way with respect to the microwave background, and the flattening of the Local Supercluster can be successfully accounted for by these models, provided that the initial perturbation is sufficiently flattened. Viable models are obtained only if the ratio of the lengths of the two smaller axes of the initial perturbation is at least 3:1 in an Einstein-de Sitter universe or at least 1.8:1 in a universe for which the density parameter (Omega) is of order 0.1, when the protocluster pancakes.

White, S. D. M.↗

Electric fields and secondary emission near a dielectric-metal interface

Dielectric surface-charge distributions near a metal-dielectric interface in vacuum depend upon secondary emission processes in the presence of normal and tangential components of electric field. From measured charge distributions created by exposing a specimen of fluorinated ethylene-propylene to monoenergetic electron fluxes, it has been possible to calculate potentials and fields on and near the dielectric surface. The effect of the normal electric field upon secondary emission is measured directly, and the effect of the tangential field is inferred from the charge-distribution data. The critical point (unity crossover) for secondary emission is shifted by the application of fields, so that it occurs at much higher primary energies than normally. Primary beams having energies up to 20 keV are used, and surface fields are as high as 20 kV/mm.

Robinson, J. W.↗

Experiments of shock associated noise of supersonic jets

The paper examines the aeroacoustics associated with model nozzles operating supersonically. In particular, the shock structure and radiated shock noise of Mach 1.5 and 2.0 nozzles are compared with those of a convergent nozzle over a wide nozzle pressure ratio range corresponding to a fully expanded Mach number between unity and 2.37. The nozzles were operated unheated both with and without a tab for screech tone suppression. The measurements show differences between the shock cell spacing of convergent and convergent-divergent nozzles, and the scaling relation appears to be a function of the exit-to-throat velocity ratio of each nozzle type. The acoustic measurements indicate the extent of the pressure ratio range where a C-D nozzle achieves a noise reduction benefit. At the design point of the Mach 1.5 nozzle, the total integrated sound power from this nozzle is 6 dB less than a convergent nozzle operating at the same pressure ratio and thrust

Seiner, J. M.↗

Interferometric observations of Saturn and its rings at a wavelength of 3.71 per cm

Interferometric observations of Saturn and its rings obtained at the Owens Valley Radio Observatory at a wavelength of 3.71 cm (8085 MHz) are presented. Models of the microwave brightness structure of the Saturn system are fit to the observations in order to estimate the brightness temperatures of the planet and its rings. The models allowed making estimates of the brightness temperatures and optical depths of the A, B, and C rings. The ring brightness temperatures and optical depths are compared with a physical ring model of isotropic scatterers in a layer which is many particles thick. The observations are consistent with particles that conservatively scatter the thermal emission from Saturn to the earth and emit no thermal radiation of their own. However, the particle single-scattering albedo that would be most consistent with the observations is slightly less than unity but probably greater than 0.95. There is evidence indicating that the ring particles must be at least a few centimeters in size.

Schloerb, F. P.↗

Improved battery charger for electric vehicles

Polyphase version of single-phase "boost chopper" significantly reduces ripple and electromagnetic interference (EMI). Drive circuit of n-phase boost chopper incorporates n-phase duty-cycle generator; inductor, transistor, and diode compose chopper which can run on single-phase or three-phase alternating current or on direct current. Device retains compactness and power factors approaching unity, while improving efficiency.

Rippel, W. E.↗