Search NASA⌕ Search

SEARCH · Search NASA

Results for “Wave function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Energetics of Oxygen Interstitials in Cr and V

Dissolved oxygen in group IIIA-VA (Nb, Ti, Zr, Y) based alloys is a fundamental problem, affecting both mechanical properties and oxidation resistance, yet details of the phenomenon are poorly understood. In these alloys, oxygen is more stable dissolved in the metal than as an oxide-compound. In contrast, alloys based on Ni, Fe, Al and Cr exhibit almost no oxygen solubility. To improve the performance of Nb and Ti based alloys it is necessary to understand the differences in oxygen solubility between these two groups of metals. As a first step we considered the energetics of interstitial oxygen in alpha-V and alpha-Cr. Both of these metals have a BCC structure, yet the oxygen solubility in V is much higher than that in Cr. We obtain total energies, densities of states and population analyses using the CASTEP plane-wave pseudopotential density functional computer code. The differences in the energetics and electronic structures of the two materials, particularly the partial densities of states associated with the interstitial oxygen, are discussed.

Good, Brian S.↗

Derivation of Formulations 1 and 1A of Farassat

Formulations 1 and 1A are the solutions of the Ffowcs Williams-Hawkings (FW-H) equation with surface sources only when the surface moves at subsonic speed. Both formulations have been successfully used for helicopter rotor and propeller noise prediction for many years although we now recommend using Formulation 1A for this purpose. Formulation 1 has an observer time derivative that is taken numerically, and thus, increasing execution time on a computer and reducing the accuracy of the results. After some discussion of the Green's function of the wave equation, we derive Formulation 1 which is the basis of deriving Formulation 1A. We will then show how to take this observer time derivative analytically to get Formulation 1A. We give here the most detailed derivation of these formulations. Once you see the whole derivation, you will ask yourself why you did not do it yourself!

Farassat, F.↗

High-Power, High-Speed Electro-Optic Pockels Cell Modulator

Electro-optic modulators rely on a change in the index of refraction for the optical wave as a function of an applied voltage. The corresponding change in index acts to delay the wavefront in the waveguide. The goal of this work was to develop a high-speed, high-power waveguide- based modulator (phase and amplitude) and investigate its use as a pulse slicer. The key innovation in this effort is the use of potassium titanyl phosphate (KTP) waveguides, making the highpower, polarization-based waveguide amplitude modulator possible. Furthermore, because it is fabricated in KTP, the waveguide component will withstand high optical power and have a significantly higher RF modulation figure of merit (FOM) relative to lithium niobate. KTP waveguides support high-power TE and TM modes - a necessary requirement for polarization-based modulation as with a Pockels cell. High-power fiber laser development has greatly outpaced fiber-based modulators in terms of its maturity and specifications. The demand for high-performance nonlinear optical (NLO) devices in terms of power handling, efficiency, bandwidth, and useful wavelength range has driven the development of bulk NLO options, which are limited in their bandwidth, as well as waveguide based LN modulators, which are limited by their low optical damage threshold. Today, commercially available lithium niobate (LN) modulators are used for laser formatting; however, because of photorefractive damage that can reduce transmission and increase requirements on bias control, LN modulators cannot be used with powers over several mW, dependent on wavelength. The high-power, high-speed modulators proposed for development under this effort will enable advancements in several exciting fields including lidarbased remote sensing, atomic interferometry, free-space laser communications, and others.

Hawthorne, Justin↗

Signal Processing for Determining Water Height in Steam Pipes with Dynamic Surface Conditions

An enhanced signal processing method based on the filtered Hilbert envelope of the auto-correlation function of the wave signal has been developed to monitor the height of condensed water through the steel wall of steam pipes with dynamic surface conditions. The developed signal processing algorithm can also be used to estimate the thickness of the pipe to determine the cut-off frequency for the low pass filter frequency of the Hilbert Envelope. Testing and analysis results by using the developed technique for dynamic surface conditions are presented. A multiple array of transducers setup and methodology are proposed for both the pulse-echo and pitch-catch signals to monitor the fluctuation of the water height due to disturbance, water flow, and other anomaly conditions.

health monitoring↗

Robust control algorithms for Mars aerobraking

Four atmospheric guidance concepts have been adapted to control an interplanetary vehicle aerobraking in the Martian atmosphere. The first two offer improvements to the Analytic Predictor Corrector (APC) to increase its robustness to density variations. The second two are variations of a new Liapunov tracking exit phase algorithm, developed to guide the vehicle along a reference trajectory. These four new controllers are tested using a six degree of freedom computer simulation to evaluate their robustness. MARSGRAM is used to develop realistic atmospheres for the study. When square wave density pulses perturb the atmosphere all four controllers are successful. The algorithms are tested against atmospheres where the inbound and outbound density functions are different. Square wave density pulses are again used, but only for the outbound leg of the trajectory. Additionally, sine waves are used to perturb the density function. The new algorithms are found to be more robust than any previously tested and a Liapunov controller is selected as the most robust control algorithm overall examined.

Shipley, Buford W., Jr.↗

ULF waves in other magnetospheres - observations and possible source mechanisms

Five other planets besides the Earth (Mercury, Jupiter, Saturn, Uranus and Neptune) in our solar system are now known to possess internal magnetic fields. The exploration of these planets by the Mariner, Pioneer, Voyager and Ulysses spacecraft has revealed that all of them possess fully expressed magnetospheres which share several similarities in their structures with the Earth's magnetosphere. This paper presents an overview of the work done so far in the field of the ULF waves in the magnetospheres of Mercury, Jupiter, Saturn and Uranus. To give an idea of the expected wave periods, gyroperiods of the dominant ion species and the fundamental periods of the standing Alfven waves are presented as functions of L parameter in these magnetospheres. In the magnetosphere of Mercury, ULF waves were observed in the vicinity of the magnetopause and in the inner magnetosphere with frequencies in the range of 0.1-0.5 Hz. In the magnetosphere of Jupiter, at least three different types of wave sources are observed. Near the dayside and the dawn magnetopause, waves with periods 5-20 min and amplitudes between 5 and 10 nT are observed which may be caused by an interaction between the corotating outflowing plasma and the antisunward moving plasma from the magnetosheath. In Saturn's magnetosphere, ULF waves have been observed to be strongly confined to the plasma sheet and have wave periods in the range of 5-60 minutes. The calculated fundamental has a wave period of 5-6 hours in the region where these waves were observed. The ULF waves have extremely small amplitudes (approximately = 0.3 nT) in the magnetosphere of Uranus. These waves were also seen to be confined to the low magnitude latitudes and have periods much shorter than that of the fundamental of a standing Alfven wave.

Khurana, K. K.↗

A Self-Consistent Model of the Interacting Ring Current Ions and Electromagnetic Ion Cyclotron Waves, Initial Results: Waves and Precipitating Fluxes

Initial results from a newly developed model of the interacting ring current ions and ion cyclotron waves are presented. The model is based on the system of two kinetic equations: one equation describes the ring current ion dynamics, and another equation describes wave evolution. The system gives a self-consistent description of the ring current ions and ion cyclotron waves in a quasilinear approach. These equations for the ion phase space distribution function and for the wave power spectral density were solved on aglobal magnetospheric scale undernonsteady state conditions during the 2-5 May 1998 storm. The structure and dynamics of the ring current proton precipitating flux regions and the ion cyclotron wave-active zones during extreme geomagnetic disturbances on 4 May 1998 are presented and discussed in detail.

Khazanov, G. V.↗

Ion Diffusive Transport Across the Separatrix Between the Low-Latitude Mantle and the Plasma Sheet By Kinetic Alfvén Waves: MMS Observation

To understand the entry of the cool low‐latitude mantle ions into the tail plasma sheet near the flanks under persistent interplanetary magnetic field B y , we evaluate the role of the cross‐field diffusive transport by kinetic Alfvén waves (KAWs) by investigating two events observed by multiscale (MMS) spacecraft. Around the separatrix between the open and closed field‐line regions, a two‐component mixing of hot plasma sheet ions of a few keV with cool mantle ions of a few hundred eV was observed, indicating transport across the separatrix. The waves observed between 0.01 and 10 Hz around the separatrix had characteristics consistent with those of KAWs. The consistency allowed us to estimate the wave vectors as a function of frequency by fitting KAW dispersion to the observations. Using the observed wave powers, plasma moments, and the estimated wave vectors, we computed the cross‐field diffusion rates associated with KAWs. The diffusion rates were found to be comparable to or larger than the Bohm diffusion rates during the intervals when the two‐component mixing was observed, indicating that the KAW diffusive transport can play a role in the entry of low‐latitude mantle ions into the plasma sheet.

Kinetic Alfvén waves↗

Bow shock and magnetosheath waves at Mercury

Mariner 10 measurements at the Mercury bow shock provide examples where the magnetic field is approximately parallel or perpendicular to the bow shock normal. Upstream of a broad irregular parallel shock, left-hand circularly polarized waves are observed which cut off very sharply at about 4 Hz. Upstream of a perpendicular shock, righ-hand circularly polarized waves are observed which persist up to the Nyquist frequency of 12 Hz. Determination of the wave propagation vector as a function of frequency helps to identify conclusively the waves as whistler mode waves propagating from the shock. The magnetosheath downstream of the parallel shock is disturbed more than that downstream of the perpendicular shock, particularly below 1 Hz. In the latter case, regular left-hand-polarized waves observed slightly above the proton gyrofrequency are identified as ion cyclotron waves with wavelengths of about 300 km which have been Doppler shifted up to their observed frequency.

Fairfield, D. H.↗

LANDSAT-D investigations in snow hydrology

Snow reflectance in all 6 TM reflective bands, i.e., 1, 2, 3, 4, 5, and 7 was simulated using a delta-Eddington model. Snow reflectance in bands 4, 5, and 7 appear sensitive to grain size. It appears that the TM filters resemble a ""square-wave'' closely enough that a square-wave can be assumed in calculations. Integrated band reflectance over the actual response functions was calculated using sensor data supplied by Santa Barbara Research Center. Differences between integrating over the actual response functions and the equivalent square wave were negligible. Tables are given which show (1) sensor saturation radiance as a percentage of the solar constant, integrated through the band response function; (2) comparisons of integrations through the sensor response function with integrations over the equivalent square wave; and (3) calculations of integrated reflectance for snow over all reflective TM bands, and water and ice clouds with thickness of 1 mm water equivalent over TM bands 5 and 7. These calculations look encouraging for snow/cloud discrimination with TM bands 5 and 7.

Dozier, J.↗

Corrections for the effects of significant wave height and attitude on Geosat radar altimeter measurements

Range estimates from a radar altimeter have biases which are a function of the significant wave height (SWH) and the satellite attitude angle (AA). Based on results of prelaunch Geosat modeling and simulation, a correction for SWH and AA was already applied to the sea-surface height estimates from Geosat's production data processing. By fitting a detailed model radar return waveform to Geosat waveform sampler data, it is possible to provide independent estimates of the height bias, the SWH, and the AA. The waveform fitting has been carried out for 10-sec averages of Geosat waveform sampler data over a wide range of SWH and AA values. The results confirm that Geosat sea-surface-height correction is good to well within the original dm-level specification, but that an additional height correction can be made at the level of several cm.

Hayne, G. S.↗

Radiation and attenuation of waves in a random medium

The physical mechanisms of excess attenuation are analyzed on the basis of a one-dimensional time-independent model of propagation in a random medium. Attenuation is regarded as the rate of decrease in the mean intensity and the mean energy flux within a propagation range. A source function is assumed to be determinate, appropriate statistical properties are chosen for the sound speed, and specified statistical properties are found for the wave functions, i.e., the mean intensity and the mean energy flux. The medium is considered to be weakly homogeneous, and expansions are developed for the intensity and mean energy flux, along with an attenuation coefficient in two parts, the second of which defines the excess attenuation. The mean radiated power is defined, and backscattering by the random inhomogeneities in the medium is modeled as redistributing the mean intensity and energy flux, with a resultant decay which occurs more quickly than with randomness.

Wenzel, A. R.↗

Excitation of Love waves in a thin film layer by a line source.

The excitation of a Love surface wave guided by a thin film layer deposited on a semiinfinite substrate is studied in this paper. Both the thin film and the substrate are considered to be elastically isotropic. Amplitudes of the surface wave in the thin film region and the substrate are found in terms of the strength of a line source vibrating in a direction transverse to the propagating wave. In addition to the surface wave, the bulk shear wave excited by the source is also studied. Analytical expressions for the bulk wave amplitude as a function of the direction of propagation, the acoustic powers transported by the surface and bulk waves, and the efficiency of surface wave excitation are obtained. A numerical example is given to show how the bulk wave radiation pattern depends upon the source frequency, the film thickness and other important parameters of the problem. The efficiency of surface wave excitation is also calculated for various parameter values.

Tuan, H.-S.↗

Spectral analysis of magnetohydrodynamic fluctuations near interplanetary shocks

Preliminary results of an investigation of magnetic fluctuations seen upstream of two interplanetary shocks are presented. The spectral analysis includes calculation of the normalized reduced magnetic helicity spectrum, the normalized reduced cross-helicity spectrum, and the Alfven ratio as discussed by Matthaeus and Goldstein (1982). Minimum variance methods are used to compute wave polarization as a function of frequency. The Taylor 'frozen in flow' hypothesis is assumed to convert frequencies to wave vectors. Some of the basic properties of the waves, including the probable mode of propagation in association with both quasi-parallel forward and reverse shocks, are described. A comparison with previous results on the generation of waves at interplanetary and planetary shocks is presented.

Vinas, A. F.↗

Equatorial waves in a stratospheric GCM - Effects of vertical resolution

It is noted that equatorially trapped wave modes, e.g., Kelvin and Rossby-gravity waves, are thought to play a critical role in forcing the quasi-biennial oscillation of the lower tropical stratosphere. The ability of a GCM to simulate these waves is examined and the changes in the wave properties as a function of the vertical resolution of the model are investigated. The dependence of the equatorial wave simulation of vertical resolution is examined utilizing three experiments with vertical grid spacings of about 2.8, 1.4, and 0.7 km. At high vertical resolution, the simulated waves are shown to agree with the available observations.

Boville, Byron A.↗

Cutoff phenomena for guided waves in moving media.

Vector potential function solution to Maxwell- Minkowski equations describing cut-off phenomena for EM wave propagation in wave guide filled with homogeneous isotropic lossless moving medium

ELECTROMAGNETIC PROPAGATION↗

Ponderomotive effects on distributions of O(+) ions in the auroral zone

Test particle calculations are used to compute the effects of gravity and ponderomotive acceleration by shear Alfven wave oscillations on the distribution function of O(+) ions along auroral field lines, assuming an ionospheric Maxwellian source of the ions at 2000 km altitude with approximately 0.5 eV of thermal energy in the parallel component of velocity. The electric field model corresponds to a standing wave oscillation with a frequency approximately 1 Hz in the azimuthal direction superimposed on the background dipole field, in which the wave amplitude is either increasing or decreasing in time. The electric field is taken to be primarily in the perpendicular direction. The time varying wave produces broad distributions with widths of 2 to 10 times the initial 0.5-eV thermal energy of the Maxwellian source, and the density and flux of upward going O(+) ions at one Earth radius are both enhanced in this model. The oxygen ion distribution functions at 1 R(sub E) altitude resulting from interaction with waves whose amplitudes are increasing in time have a more gradual lower energy cutoff than do the distribution functions resulting from decaying waves. The high-energy part of the distribution functions in growing waves reflects the temperature of the Maxwellian source, while the high-energy part of the distributions resulting from decaying waves steepens with time, independent of the source temperature.

Witt, E.↗

Simulating Electron Distribution Function in the Pulsating Aurora Using Particle and Wave Data of ARASE Satellite

Decades lasting research on the pulsating aurora suggested that this phenomenon forms as result of interactions between the magnetospheric keVs electrons and whistler-mode chorus waves. Arase satellite observation reported the direct evidence for this process confirming in situ measurement of highly correlated precipitated electrons and chorus wave activity. This paper presents the theoretical analysis of this observational event based on the SuperThermal Electron Transport (STET) code that simulates the highly dynamic environment of measured waves and particle data. Specifically, the STET code simulated results confirms the delicate loss-cone observation results of this mission and further reveals the broader energy range of precipitated electron fluxes that was not measurable by Arase satellite.

George V Khazanov↗