Search NASA⌕ Search

SEARCH · Search NASA

Results for “anionic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Synthesis and structure of new anionic five-coordinate silicon complexes derived from α-hydroxy acids and 1-methylpiperazine-2,5-dione

Anionic five-coordinate complexes with two bis-O,O’-chelating ligands bearing α-hydroxy acid moieties, dicyclohexylammonium salts Cy{sub 2}NH{sub 2}{sup +}{PpnCH_2Si[OCR_2C(O)O]_2}{sup −} (Cy is cyclohexyl, PpnCH{sub 2} is 4-methyl-2,5-dioxopiperazin-1-ylmethyl, R = Me, Ph), were synthesized by esterification of alkoxysilane PpnCH{sub 2}Si(OMe){sub 3} with α-hydroxy acids (dimethyl- and diphenylgylcolic acids) in the presence of dicyclohexylamine. The five-coordinated state of the silicon atom in the resulting compounds in solution was confirmed by {sup 29}Si NMR spectroscopy. According to the X-ray diffraction data, the synthesized compounds contain the SiCO{sub 4} coordination unit.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced mobility of cations and anions in the redox state: The polaronium mechanism

Hugely enhanced slow-ion diffusivity has been widely observed under extreme redox conditions and for unclear reasons. Aided by first-principles calculations on model systems of ZrO 2 , CeO 2 , BaTiO 3 and Li 4/3 Mn 2/3 O 2 , here we successfully explained the intriguing phenomenon by a polaronium mechanism. We found a polaronium, defined as a transitory complex of a polaronic electron or hole and a migrating counterion, becomes highly mobile when the counterion comes from a d 0 or f 0 cation (e.g., Zr 4+ , Ti 4+ and Ce 4 ) or a p 6 anion (e.g., O 2- ) in the host compound. Upon a redox reaction, the complex attains a d 1 /f 1 or p 5 configuration, which spontaneously forms because it is favored by an electron-phonon interaction (manifest as the Jahn-Teller effect in high symmetry systems) that enables local relaxation and lowers the system energy. Here our calculations found such interaction reaching its peak at the saddle point where the local environment is softest, so soft that it allows a reorientation of the anisotropic d/f/p orbital to minimize the electron repulsion locally. Since the complex may dissolve after a successful ion-migration event, the redox electron/hole can be recycled to form another free-radical-like polaronium elsewhere, thereby enhancing ion migration repeatedly. The proposed polaronium mechanism, which also operates in ceramics doped with mixed-valence cations, is most relevant under dynamic and extreme thermal/field/irradiation conditions where extra electrons/holes are abundantly generated by non-equilibrium redox reactions. For such operations, some with emerging applications, our diffusion-enhancing mechanism may provide new theoretical insight to help understand their material/microstructure stability and performance.

36 MATERIALS SCIENCE↗

Organic anion transporter 1 (OAT1/SLC22A6) enhances bioluminescence based on d-luciferin–luciferase reaction in living cells by facilitating the intracellular accumulation of d-luciferin

Highlights: • OAT1 expression in luciferase-expressing cells enhanced bioluminescence via the d-luciferin–luciferase reaction. • OAT1 mediated the intracellular accumulation of d-luciferin. • OAT1 increased visualization sensitivity of the bioluminescence emitted by the luciferase-expressing cells. Bioluminescence (BL) imaging based on d-luciferin (d-luc)–luciferase reaction allows noninvasive and real-time monitoring of luciferase-expressing cells. Because BL intensity depends on photons generated through the d-luc–luciferase reaction, an approach to increase intracellular levels of d-luc could improve the detection sensitivity. In the present study, we showed that organic anion transporter 1 (OAT1) is useful, as a d-luc transporter, in boosting the BL intensity in luciferase-expressing cells. Functional screening of several transporters showed that the expression of OAT1 in HEK293 cells stably expressing Pyrearinus termitilluminans luciferase (HEK293/eLuc) markedly enhanced BL intensity in the presence of d-luc. When OAT1 was transiently expressed in HEK293 cells, intracellular accumulation of d-luc was higher than that in control cells, and the specific d-luc uptake mediated by OAT1 was saturable with a Michaelis constant (K{sub m}) of 0.23 μM. The interaction between OAT1 and d-luc was verified using 6-carboxyfluorescein, a typical substrate of OAT1, which showed that d-luc inhibited the uptake of 6-carboxyfluorescein mediated by OAT1. BL intensity was concentration-dependent at steady states in HEK293/eLuc cells stably expressing OAT1, and followed Michaelis–Menten kinetics with an apparent K{sub m} of 0.36 μM. In addition, the enhanced BL was significantly inhibited by OAT1-specific inhibitors. Thus, OAT1-mediated transport of d-luc could be a rate-limiting step in the d-luc–luciferase reaction. Furthermore, we found that expressing OAT1 in HEK293/eLuc cells implanted subcutaneously in mice also significantly increased the BL after intraperitoneal injection of d-luc. Our findings suggest that because OAT1 is capable of transporting d-luc, it can also be used to improve visualization and monitoring of luciferase-expressing cells.

60 APPLIED LIFE SCIENCES↗

TMEM16F/ANO6, a Ca2+-activated anion channel, is negatively regulated by the actin cytoskeleton and intracellular MgATP

Highlights: • ANO6 current shows sluggish activation even with high [Ca{sup 2+}]{sub i}, and inactivation. • Actin cytoskeleton disruption accelerate both activation and inactivation of ANO6. • Intracellular MgATP further delays ANO6 activation, and prevent inactivation. • The effects of MgATP on ANO6 were overcome by actin inhibitor, cytochalasin-D. • State actin cytoskeleton is crucial for determining ANO6 activity in intact cells. Anoctamin 6 (ANO6/TMEM16F) is a recently identified membrane protein that has both phospholipid scramblase activity and anion channel function activated by relatively high [Ca{sup 2+}]{sub i}. In addition to the low sensitivity to Ca{sup 2+}, the activation of ANO6 Cl{sup −} conductance is very slow (>3–5 min to reach peak level at 10 μM [Ca{sup 2+}]{sub i}), with subsequent inactivation. In a whole-cell patch clamp recording of ANO6 current (I{sub ANO6,w-c}), disruption of the actin cytoskeleton with cytochalasin-D (cytoD) significantly accelerated the activation kinetics, while actin filament-stabilizing agents (phalloidin and jasplakinolide) commonly inhibited I{sub ANO6,w-c}. Inside-out patch clamp recording of ANO6 (I{sub ANO6,i-o}) showed immediate activation by raising [Ca{sup 2+}]{sub i}. We also found that intracellular ATP (3 mM MgATP in pipette solution) decelerated the activation of I{sub ANO6,w-c}, and also prevented the inactivation of I{sub ANO6,w-c}. However, the addition of cytoD still accelerated both activation and inactivation of I{sub ANO6,w-c}. We conclude that the actin cytoskeleton and intracellular ATP play major roles in the Ca{sup 2+}-dependent activation and inactivation of I{sub ANO6,w-c}, respectively.

60 APPLIED LIFE SCIENCES↗

Effects of anionic and nonionic surfactants on the dispersion and stability of nanoSiO2 in aqueous and cement pore solutions

It has been well recognized that the benefits and effectiveness of nanoparticles in cement-based materials could not be maximized if these are not well dispersed. To address this issue, in this study, different anionic (SDS and PCE) and nonionic surfactants (Tweens and Tritons) were used to disperse nanosilica (NS) in aqueous solution and cement pore solution. The results show that the dispersibility of NS in cement pore solution was improved, and the compressive strength of the cement-NS pastes increased linearly with critical micelle concentration (CMC) of nonionic surfactants. Among all surfactants studied, Triton X-405 led the paste to the highest increase in strength (33% at 1-day and 41% at 3-days) since it had the highest CMC. TEM and EDS analysis evidenced that this strength increase might be attributed to the nucleation of outer product CSH gel and its densification with calcite nanocrystals, attributed to Triton X-405 addition.

36 MATERIALS SCIENCE↗

A simulation-based model studying monoethanolamine and aprotic heterocyclic anion ionic liquid (AHA-IL) mixtures for carbon capture

Capturing of waste CO 2 , particularly from large industrial point sources, is necessary for either permanent storage or CO 2 utilization. Amine solvents used for carbon capture have certain drawbacks, particularly the high energy required by the reboiler for solvent regeneration and degradation of the amine with absorption/regeneration cycling. These challenges may be overcome using ionic liquids (ILs) that can be tailored for operating under typical flue gas stream conditions (8–10% CO 2 , 18–20% H 2 O, 2–3% O 2 , and 67–72% N 2 ). ILs, however, oftentimes suffer from high viscosities, leading to diffusion limitations when compared to amine solvents. This work models the combinations of aprotic heterocyclic anion ILs (AHA-IL) with monoethanolamine (MEA) and studies the carbon capture effectiveness of these mixtures. Furthermore, this study found that all AHA-IL/MEA mixtures exhibited 32 % lower enthalpy of reaction (compared to MEA) and 64 % lower viscosity (compared to AHA-IL), which are desirable characteristics for CO 2 capture solvents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polymer electrolytes based on protic ionic liquids with perfluorinated anions for safe lithium-ion batteries

Here, the quest for safe and high-performance polymer electrolytes in lithium-ion batteries (LIBs) has led researchers to explore protic ionic liquids (PILs) as potential candidates to be entrapped in polymer matrices. In this context, we present an investigation into solid polymeric systems based on poly(methyl methacrylate) (PMMA) as a host for PILs, featuring 1,8-diazabicyclo-[5,4,0]-undec-7-ene (DBU) cation paired with three different anions: bis(trifluoromethanesulfonyl)imide (TFSI – ), trifluoromethanesulfonate (TFO – ), and (trifluoromethanesulfonyl-nonafluorobutylsulfonyl)imide (IM14 – ). Additionally, we explore the lithium-doped IM14-gel-like system to broaden our understanding of these intriguing materials. Through comprehensive thermal analysis, solid-state NMR, and diffusion NMR techniques, we delve into the interactions and structural features of these binary and ternary polymeric systems. Our investigation reveals unique dynamics and ion interactions within the PMMA matrix, shedding light on the potential of these materials for advanced energy storage technologies. Particularly, we highlight the distinctive features of DBUH-IM14 and its specific interaction with the polymeric matrix and the lithium ions, underscoring its significance in advancing safer and more efficient energy storage devices.

25 ENERGY STORAGE↗

Anion exchange membranes based on (3-acrylamidopropyl) trimethylammonium chloride (APTA) and phenyl Acrylate: Impact of crosslinker and crosslinker content on physiochemical properties and transport behavior of acetate and formate

CO 2 reduction cells are innovative devices that convert CO 2 into valuable chemicals, such as formate (OFm - ) and acetate (OAc - ), at the cathode. One of the key challenges in these devices is the development of ion exchange membranes that enable the transport of charge carriers between electrodes while minimizing the transfer of CO 2 reduction products. This study focuses on the preparation and characterization of crosslinked anion exchange membranes (AEMs) made of phenyl acrylate (PA) and (3-acrylamidopropyl) trimethylammonium chloride (APTA), crosslinked with either poly(ethylene glycol) diacrylate (PEGDA) or N,N’-methylenebisacrylamide (MBAA). Here, the membranes are characterized to understand their physiochemical properties and corresponding transport behavior through characterization of water volume fraction, mechanical properties, ionic conductivity, ion exchange capacity, water contact angle, glass transition temperature as well as their permeability and solubility to formate and acetate. MBAA crosslinked membranes exhibit higher Young’s modulus and lower strain at break compared to PEGDA-crosslinked membranes, which is attributed to their shorter chain length. Within a series of membranes of varied comonomer content, for either PEGDA or MBAA as crosslinker, permeabilities generally follow free volume theory (increasing permeability with increasing water content where water content increases with decreasing crosslinker content). Interestingly, for membranes with different crosslinkers but analogous water volume fraction significant differences (∼2 orders of magnitude) in permeability are observed which we attribute to differences in chain mobility as characterized through the glass transition temperature.

25 ENERGY STORAGE↗

Analysis of anion exchange membrane water electrolyzer performance and its evolution over time

Understanding water, evolved gas, and ionic transport in membrane-electrode-assemblies (MEAs) is essential for the development of high performance and durable anion exchange membrane water electrolyzers (AEMWEs). This study evaluates the MEA conditioning process, operating conditions, and short-term stability in a 1 M potassium hydroxide (KOH) electrolyte, focusing on the underlying transport phenomena. We observe a significant initial voltage loss in continuous cell operation, which could be associated with gas bubble accumulation, transport layer or flow field passivation, and changes in the catalyst oxidation state. Further, we investigate the effects of materials and operational configurations, including the membrane type and thickness, and the electrolyte flow rate, including KOH being fed to both electrodes as well as to the anode only. Furthermore, the effect of membrane drying temperature on ex situ as well as in situ electrochemical performance is evaluated. Finally, we discuss 700 h of AEMWE operation at 1 A/cm 2 , highlighting the underlying degradation phenomena.

25 ENERGY STORAGE↗

Oxidation and anion lattice defect signatures of hypostoichiometric lanthanide-doped UO 2

A series of sintered UO 2 pellets doped with lanthanide (Ce, Nd, Yb) elements were investigated using powder X-ray diffraction, Raman spectroscopy, thermogravimetric analyses and differential scanning calorimetry. A combination of electron microprobe and thermogravimetric analyses, for oxygen content, enabled precise determination of the hypostoichiometry for lanthanide-doped samples at 1 and 5 atom percent. Two Raman laser wavelengths (785 and 455 nm) have afforded greater sensitivity to spectroscopic signatures of the phonon bands (1LO and 2LO) associated with oxidation of (U 1-y M y )O 2-x and the anion defects introduced by lanthanide substitution. Oxygen hypostoichiometry forces a reduction in the average coordination number surrounding (U,M) sites, which is compensated by a decrease in U-O bond length, and concomitantly the lattice parameter, consistent with the obtained Raman spectra. The evolution of O/M ratio up to (U 1-y M y )O 2 after oxidation was also examined using Raman spectroscopy, revealing that the ‘defect band’, including a component attributed to oxygen vacancies (~540 cm -1 ) and the 1LO phonon (~575 cm -1 ) increased in intensity with increasing dopant concentration and upon oxidation. Here, the lanthanide dopants inhibited oxidation to U 3 O 8 , most prominently for Yb 5 at%, having been delayed by ~180 °C. Thermogravimetric analyses reveal an early oxidation feature that may be related to influx of O to satisfy hypostoichiometry up to (U 1-y M y )O 2 , possibly stabilizing a U 4 O 9 or U 3 O 7 intermediate, delaying oxidation to U 3 O 8 .

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Water uptake, ionic conductivity and swelling properties of anion-exchange membrane

Water uptake, ionic conductivity and dimensional change of the anion-exchange membrane made by Tokuyama Corporation (A201 membrane) are investigated at different temperatures and water activities. Specifically, the amount of water taken up by membranes exposed to water vapor and membranes soaked in liquid water is determined. The water uptake of the A201 membrane increases with water content as well as temperature. In addition, water sorption data shows Schroeder's paradox for the AEMs investigated. The swelling properties of the A201 membrane exhibit improved dimensional stability compared with Nafion membrane. Water sorption of the A201 membrane occurs with a substantial negative excess volume of mixing. The threshold value of hydrophilic fraction in the A201 membrane for ionic conductivity is around 0.34, above which, the conductivity begins to rise quickly. This indicates that a change in the connectivity of the hydrophilic domains occurs when hydrophilic fraction approaches 0.34. (C) 2013 Elsevier B.V. All rights reserved.

Duan, QJ↗

Anion exchange membrane fuel cells: Current status and remaining challenges

The anion exchange membrane fuel cell (AEMFC) is an attractive alternative to acidic proton exchange membrane fuel cells, which to date have required platinum-based catalysts, as well as acid-tolerant stack hardware. The AEMFC could use non-platinum-group metal catalysts and less expensive metal hardware thanks to the high pH of the electrolyte. Over the last decade, substantial progress has been made in improving the performance and durability of the AEMFC through the development of new materials and the optimization of system design and operation conditions. Here in this perspective article, we describe the current status of AEMFCs as having reached beginning of life performance very close to that of PEMFCs when using ultra-low loadings of Pt, while advancing towards operation on non-platinum-group metal catalysts alone. In the latter sections, we identify the remaining technical challenges, which require further research and development, focusing on the materials and operational factors that critically impact AEMFC performance and/or durability. Finally, these perspectives may provide useful insights for the development of next-generation of AEMFCs.

30 DIRECT ENERGY CONVERSION↗

La and Al co-doped CaMnO 3 perovskite oxides: From interplay of surface properties to anion exchange membrane fuel cell performance

This work reports the first account of perovskite oxide and carbon composite oxygen reduction reaction (ORR) catalysts integrated into anion exchange membrane fuel cells (AEMFCs). Perovskite oxides with a theoretical stoichiometry of Ca 0.9 La 0.1 Al 0.1 Mn 0.9 O 3-δ are synthesized by an aerogel method and calcined at various temperatures, resulting in a set of materials with varied surface chemistry and surface area. Material composition is evaluated by X-ray diffraction, energy dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy. The perovskite oxide calcined at 800 degrees C shows the importance of balance between surface area, purity of the perovskite phase, and surface composition, resulting in the highest ORR mass activity when evaluated in rotating disk electrodes. Integration of this catalyst into AEMFCs reveals that the best AEMFC performance is obtained when using composites with 30:70 perovskite oxide:carbon composition. Doubling the loading leads to an increase in the power density from 30 to 76 mW cm -2 . The AEMFC prepared with a composite based on perovskite oxide and N-carbon achieves a power density of 44 mW cm -2 , demonstrating an ~50% increase when compared to the highest performing composite with undoped carbon at the same loading.

36 MATERIALS SCIENCE↗

On the origin of permanent performance loss of anion exchange membrane fuel cells: Electrochemical oxidation of phenyl group

The durability of alkaline anion exchange membrane fuel cells (AEMFCs) is a critical requirement for implementing this technology in cost-effective energy conversion. However, the lifetime of current AEMFCs is short, ca. < 1,000 h and the cause of the performance loss over time is poorly understood. Here, we investigate the origin of AEMFC unrecoverable performance loss. We diagnosed the recoverable performance loss induced by carbonation and anode flooding during an extended-term test with transient operating conditions. Multiple extended-term tests under current densities and the electrochemical and analytical analyses suggest that the most prominent permanent performance loss of AEMFCs occurs by phenol formation as a result of electrochemical phenyl oxidation of cathode ionomeric binder. The produced phenol is acidic and neutralizes the quaternary ammonium group to lower the local pH. Finally, the impact of this degradation pathway is discussed to explain the reported lifetime performance of current AEMFCs.

08 HYDROGEN↗

Self-adhesive ionomers for durable low-temperature anion exchange membrane electrolysis

Low-temperature water electrolysis using an anion conductive polymer electrolyte has several potential advantages over other technologies, however, the fabrication of durable alkaline electrodes remains a challenge. Detachment of catalysts results in the loss of electrochemical surface area. Simple mixtures of ionomer and catalyst can suffer from poor catalyst adhesion because only physical adhesion is used to bind the components together. A family of chemically bonded, self-adherent, hydroxide conducting ionomers were synthesized and tested under alkaline electrolysis conditions with nickel ferrite anode electrocatalysts and platinum-nickel cathode catalyst. The ionomers are based on hydroxide conducting poly(norbornene) polymers used as the solid polymer electrolyte in alkaline fuel cells and electrolyzers. The synthesized terpolymer ionomers have been functionalized to provide pendant sites for covalent chemical bonding of bis(phenyl)-A-diglycidyl ether to the ionomer, catalyst, and porous transport layer. The electrodes show excellent adhesion between the catalyst particles, porous transport layer and ionomer, as determined by adhesion measurements and electrolysis performance. As a result, the AEM electrolyzer had stable voltage performance under high current density (1 A/ cm 2 at 1.83 V (67% voltage efficiency)) for extended time periods (>600 h) without degradation.

08 HYDROGEN↗

Design and operating principles for high-performing anion exchange membrane water electrolyzers

Anion-exchange-membrane water electrolyzers (AEMWEs) provide a promising pathway to utilize low-carbon renewable electricity to produce clean hydrogen at high efficiency and purity, while maintaining low system costs compared to incumbent technologies. Though significant progress has been made in developing membranes and catalysts, AEMWEs still require better performance and durability to realize widespread deployment. Here, we overcome these challenges by decoupling anode and cathode polarization behavior via integration of a reference electrode in the membrane-electrode assembly. This measurement identified that the mass-transport losses dominate the cathode overpotential if feeding with electrolytes, while kinetic losses dominate the anode overpotential. These losses are mitigated by varying electrode properties and operating strategies, where a more hydrophobic, optimal loaded cathode, a high porosity anode, and operating with the cathode dry exhibited the best performance. These findings eventually enabled achieving a high-performing and durable complete PGM-free AEMWE operating at 1.5 Acm –2 for over 500h with negligible degradation, demonstrating significant progress for AEMWEs.

25 ENERGY STORAGE↗

Synthesis and structural investigation of the compounds containing HF{sub 2}{sup -} anions: Ca(HF{sub 2}){sub 2}, Ba{sub 4}F{sub 4}(HF{sub 2})(PF{sub 6}){sub 3} and Pb{sub 2}F{sub 2}(HF{sub 2})(PF{sub 6})

Three new compounds Ca(HF{sub 2}){sub 2}, Ba{sub 4}F{sub 4}(HF{sub 2})(PF{sub 6}){sub 3} and Pb{sub 2}F{sub 2}(HF{sub 2})(PF{sub 6}) were obtained in the system metal(II) fluoride and anhydrous HF (aHF) acidified with excessive PF{sub 5}. The obtained polymeric solids are slightly soluble in aHF and they crystallize out of their aHF solutions. Ca(HF{sub 2}){sub 2} was prepared by simply dissolving CaF{sub 2} in a neutral aHF. It represents the second known compound with homoleptic HF environment of the central atom besides Ba(H{sub 3}F{sub 4}){sub 2}. The compounds Ba{sub 4}F{sub 4}(HF{sub 2})(PF{sub 6}){sub 3} and Pb{sub 2}F{sub 2}(HF{sub 2})(PF{sub 6}) represent two additional examples of the formation of a polymeric zigzag ladder or ribbon composed of metal cation and fluoride anion (MF{sup +}){sub n} besides PbF(AsF{sub 6}), the first isolated compound with such zigzag ladder. The obtained new compounds were characterized by X-ray single crystal diffraction method and partly by Raman spectroscopy. Ba{sub 4}F{sub 4}(HF{sub 2})(PF{sub 6}){sub 3} crystallizes in a triclinic space group P1-bar with a=4.5870(2) A, b=8.8327(3) A, c=11.2489(3) A, {alpha}=67.758(9){sup o}, {beta}=84.722(12), {gamma}=78.283(12){sup o}, V=413.00(3) A{sup 3} at 200 K, Z=1 and R=0.0588. Pb{sub 2}F{sub 2}(HF{sub 2})(PF{sub 6}) at 200 K: space group P1-bar , a=4.5722(19) A, b=4.763(2) A, c=8.818(4) A, {alpha}=86.967(10){sup o}, {beta}=76.774(10){sup o}, {gamma}=83.230(12){sup o}, V=185.55(14) A{sup 3}, Z=1 and R=0.0937. Pb{sub 2}F{sub 2}(HF{sub 2})(PF{sub 6}) at 293 K: space group P1-bar, a=4.586(2) A, b=4.781(3) A, c=8.831(5) A, {alpha}=87.106(13){sup o}, {beta}=76.830(13){sup o}, {gamma}=83.531(11){sup o}, V=187.27(18) A{sup 3}, Z=1 and R=0.072. Ca(HF{sub 2}){sub 2} crystallizes in an orthorhombic Fddd space group with a=5.5709(6) A, b=10.1111(9) A, c=10.5945(10) A, V=596.77(10) A{sup 3} at 200 K, Z=8 and R=0.028. - Graphical abstract: Three new compounds Ca(HF{sub 2}){sub 2}, Ba{sub 4}F{sub 4}(HF{sub 2})(PF{sub 6}){sub 3} and Pb{sub 2}F{sub 2}(HF{sub 2})(PF{sub 6}) were obtained in the system metal(II) fluoride and anhydrous HF acidified with excessive PF{sub 5} and characterized by X-ray single crystal diffraction method and partly by Raman spectroscopy. Ca(HF{sub 2}){sub 2} represents the second known compound with homoleptic HF{sub 2}{sup -} environment of the central atom. Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Assemblies based on the directing effect of non-classical W{sub 18} anionic clusters and the rod-like trans-1,2-di-(4-pyridyl)-ethylen (bpe)

Two polyoxometalate (POM) supramolecular assemblies based on W{sub 18} clusters and the rigid organic trans-1,2-di-(4-pyridyl)-ethylen (bpe) have been synthesized and fully characterized, namely (H{sub 2}bpe)3.5H{sub 2}[SbW{sub 18}O{sub 60}].5H{sub 2}O (1), and (H{sub 2}bpe)5[Ni{sub 4}(AsW{sub 9}O{sub 34}){sub 2}(H{sub 2}O){sub 2}].3H2O (2). Compounds 1-2 are formed from organic bpe cations and different polytungstate anions: pseudo-Dawson-type [SbW{sub 18}O{sub 60}]{sup 9-} in 1 and sandwich-type [Ni{sub 4}(H{sub 2}O){sub 2}(AsW{sub 9}O{sub 34}){sub 2}]{sup 10-} in 2. Both of compounds 1-2 crystallize in a low-symmetrical space group of P-1 and consist of a complicated supramolecular network based on non-covalent intermolecular weak interactions, including hydrogen bonding and {pi}...{pi} stacking. The multipoint hydrogen bonding interactions constitute the structural feature in two supramolecular frameworks. The UV-vis, fluorescence and electrochemistry properties are also studied. -- Graphical abstract: Two polyoxometalate-based supramolecular assemblies built upon W{sub 18} clusters and the rigid organic trans-1,2-di-(4-pyridyl)-ethylen (bpe) have been synthesized and characterized. Research highlights: > Sb{sup 3+} has a larger ionic radius to prevent the formation of the sandwich-type polyoxometalate cluster. > Non-covalent interactions play important roles in the self-organization process. > Polyanion can structure the conjugated organic molecule into a parallel and ordered arrangement. > Polyanion-based hybrid is a potential candidate in the modified material for electrode.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗