Search NASA⌕ Search

SEARCH · Search NASA

Results for “certification testing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

High-Intensity Radiated Field (HIRF) Map - An Avoidance Approach for UAM, AAM, and UAS Vehicles

Advanced Air Mobility (AAM), Urban Air Mobility (UAM), and Unmanned Aerial Systems (UAS) vehicles will fly in similar airspace to Transport Category Rotorcraft, thereby requiring them to meet the most severe requirements for High Intensity Radiated Fields (HIRF) certification. The environment is severe for rotorcraft, much more so than for fixed-wing aircraft, due to lower altitude operations, potentially exposing the vehicles to close and direct view of high-power transmitters on the ground. High-level HIRF exposure potentially leads to avionic system upsets, interference, and undesirable effects. Shielding and circuit protection against HIRF will be a significant barrier to size, weight, and cost, especially for emerging electric vertical take-off and landing (eVTOL) and electric short take-off and landing (eSTOL) vehicles. This paper proposes a novel approach to HIRF protection, which reduces costs by testing and certifying vehicles to a “vehicle tolerance level” that is lower than required for Transport Category Rotorcraft. The remaining protection is achieved by maintaining a safe distance from known HIRF sources, calculated based on the vehicle's tolerance level and transmitter characteristics such as transmit power, antenna beamwidth, and direction. Tailored maps are developed, identifying transmitters and avoidance zones within an operating area or along a flight path, allowing for restricted vehicle operations. The HIRF avoidance zones could be smaller for vehicles with higher tolerance levels, enabling them to operate closer to transmitters. Transmitter data can be extracted from regulatory databases like the FCC and NOAA. A map tool is developed in Matlab to calculate and plot HIRF avoidance zones from transmitters in FCC and NOAA databases as proof of concept. Illustrations are presented for AM/FM/TV transmitters, communication satellite dishes, and weather radars. Also illustrated are HIRF zones for smaller transmitters, including land-mobile radios, pagers, microwave links, and cellular towers. An example of flight planning around the transmitters is presented. This method is a substantial deviation from the standard approach and involves slightly higher flight-planning complexity, but the potential cost savings are significant. Future AAM/UAM/UAS aeronautical charts could include these new HIRF avoidance zones.

HIRF↗
NASA NTRSDate not supplied

High-Intensity Radiated Field (HIRF) Map - An Avoidance Approach for UAM, AAM, and UAS Vehicles

Advanced Air Mobility (AAM), Urban Air Mobility (UAM), and Unmanned Aerial Systems (UAS) vehicles will fly in similar airspace to Transport Category Rotorcraft, thereby requiring them to meet the most severe requirements for HighIntensity Radiated Fields (HIRF) certification. The environment is severe for rotorcraft, much more so than for fixed-wing aircraft, due to lower altitude operations, potentially exposing the vehicles to close and direct view of high-power transmitters on the ground. High-level HIRF exposure potentially leads to avionic system upsets, interference, and undesirable effects. Shielding and circuit protection against HIRF will be a significant barrier to size, weight, and cost, especially for emerging electric vertical take-off and landing (eVTOL) and electric short take-off and landing (eSTOL) vehicles. This paper proposes a novel approach to HIRF protection, which reduces costs by testing and certifying vehicles to a “vehicle tolerance level” that is lower than required for Transport Category Rotorcraft. The remaining protection is achieved by maintaining a safe distance from known HIRF sources, calculated based on the vehicle's tolerance level and transmitter characteristics such as transmit power, antenna beamwidth, and direction. Tailored maps are developed, identifying transmitters and avoidance zones within an operating area or along a flight path, allowing for restricted vehicle operations. The HIRF avoidance zones could be smaller for vehicles with higher tolerance levels, enabling them to operate closer to transmitters. Transmitter data can be extracted from regulatory databases like the FCC and NOAA. A map tool is developed in Matlab to calculate and plot HIRF avoidance zones from transmitters in FCC and NOAA databases as proof of concept. Illustrations are presented for AM/FM/TV transmitters, communication satellite dishes, and weather radars. Also illustrated are HIRF zones for smaller transmitters, including land-mobile radios, pagers, microwave links, and cellular towers. An example of flight planning around the transmitters is presented. This method is a substantial deviation from the standard approach and involves slightly higher flight-planning complexity, but the potential cost savings are significant. Future AAM/UAM/UAS aeronautical charts could include these new HIRF avoidance zones.

HIRF↗
DOE OSTI2019

Viability of Data Analytics to Ascertain Component Performance for Additive Manufacturing

The Transformational Challenge Reactor (TCR) program is leveraging additive manufacturing (AM) technologies to produce multiple nuclear components to be assembled into a fully functional microreactor core. AM was selected as the main manufacturing technology for TCR because it has the potential to disrupt the nuclear industry on two fronts: (1) it enables the manufacturing of very complex geometries with optimized and tailored material properties for the intended use of the component, opening up new options for reactor designs, and (2) it allows for a better understanding of the manufacturing process through real-time in situ monitoring, data analytics, and artificial intelligence, which can lead to a streamlined qualification and certification process. Within TCR, the development and deployment of a digital platform aims at addressing the latter opportunity. As part of this effort, the collection of pedigree datasets is vital, should these data be generated before, during or after the manufacturing process. This report focuses on the development of data analytics tools enabling qualitative assessment of the manufacturing processes to automate the identification of flaws in in situ monitoring imagery and to correlate those flaws to the resulting mechanical testing data. Through examples, the report gives an overview of the data collected and presents a path forward for the digital platform.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
NASA NTRS1972

Noise measurements obtained during visual approach monitor evaluation in 747 aircraft

The results are reported of acoustic measurements made on the 747 aircraft during visual approach monitor evaluation approaches. This display is designed to improve approach and landing precision under visual flight rule conditions. The purpose of the acoustic portion of the test was to measure, evaluate, and identify the noise levels during various types of aircraft approaches. Six noise measurement sites were positioned on the centerline of the approach ground track. The six noise measurement stations on the approach ground track were positioned between approximately 1 and 6 nautical miles from runway threshold. The 1-nautical mile point was chosen as the beginning of the ground track because it is specified as the approach measurement point in the FAA noise certification requirements. The 6-nautical mile point was chosen for its proximity to the point where the approach is initiated.

Tanner, C. S.↗
NASA NTRS1994

Lightning Protection

Kit-built airplanes are more affordable because they are assembled by the owner and do not require Federal Aviation Administration (FAA) certification. The Glasair III, is an advanced technology homebuilt, constructed of a fiberglass and graphite fiber composite material, and equipped with digital instruments. Both technologies make the airplane more susceptible to lightning effects. When Glasair manufacturer, Stoddard-Hamilton, decided that lightning protection would enable more extensive instrument flight and make the plane more marketable, they proposed a joint development program to NASA Langley Research Center (LAR). Under a Small Business Innovation Research (SBIR) contract, Langley contractors designed and tested a lightning protection system, and the Glasair III-LP became the first kit-built composite aircraft to be lightning tested and protection-verified under FAA guidelines for general aviation aircraft.

Source record↗
NASA NTRS2012

Development and Calibration of a System-Integrated Rotorcraft Finite Element Model for Impact Scenarios

Two full-scale crash tests of an MD-500 helicopter were conducted in 2009 and 2010 at NASA Langley's Landing and Impact Research Facility in support of NASA s Subsonic Rotary Wing Crashworthiness Project. The first crash test was conducted to evaluate the performance of an externally mounted composite deployable energy absorber (DEA) under combined impact conditions. In the second crash test, the energy absorber was removed to establish baseline loads that are regarded as severe but survivable. The presence of this energy absorbing device reduced the peak impact acceleration levels by a factor of three. Accelerations and kinematic data collected from the crash tests were compared to a system-integrated finite element model of the test article developed in parallel with the test program. In preparation for the full-scale crash test, a series of sub-scale and MD-500 mass simulator tests were conducted to evaluate the impact performances of various components and subsystems, including new crush tubes and the DEA blocks. Parameters defined for the system-integrated finite element model were determined from these tests. Results from 19 accelerometers placed throughout the airframe were compared to finite element model responses. The model developed for the purposes of predicting acceleration responses from the first crash test was inadequate when evaluating more severe conditions seen in the second crash test. A newly developed model calibration approach that includes uncertainty estimation, parameter sensitivity, impact shape orthogonality, and numerical optimization was used to calibrate model results for the full-scale crash test without the DEA. This combination of heuristic and quantitative methods identified modeling deficiencies, evaluated parameter importance, and proposed required model changes. The multidimensional calibration techniques presented here are particularly effective in identifying model adequacy. Acceleration results for the calibrated model were compared to test results and the original model results. There was a noticeable improvement in the pilot and copilot region, a slight improvement in the occupant model response, and an over-stiffening effect in the passenger region. One lesson learned was that this approach should be adopted early on, in combination with the building-block approaches that are customarily used, for model development and pretest predictions. Complete crash simulations with validated finite element models can be used to satisfy crash certification requirements, potentially reducing overall development costs.

Annett, Martin S.↗
DOE OSTI2017

ASC FY17 Implementation Plan, Rev. 1

The Stockpile Stewardship Program (SSP) is an integrated technical program for maintaining the safety, surety, and reliability of the U.S. nuclear stockpile. The SSP uses nuclear test data, computational modeling and simulation, and experimental facilities to advance understanding of nuclear weapons. It includes stockpile surveillance, experimental research, development and engineering programs, and an appropriately scaled production capability to support stockpile requirements. This integrated national program requires the continued use of experimental facilities and programs, and the computational capabilities to support these programs. The Advanced Simulation and Computing Program (ASC) is a cornerstone of the SSP, providing simulation capabilities and computational resources that support annual stockpile assessment and certification, study advanced nuclear weapons design and manufacturing processes, analyze accident scenarios and weapons aging, and provide the tools to enable stockpile Life Extension Programs (LEPs) and the resolution of Significant Finding Investigations (SFIs). This requires a balance of resources, including technical staff, hardware, simulation software, and computer science solutions.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS2005

Fluids and Combustion Facility: Combustion Integrated Rack Modal Model Correlation

The Fluids and Combustion Facility (FCF) is a modular, multi-user, two-rack facility dedicated to combustion and fluids science in the US Laboratory Destiny on the International Space Station. FCF is a permanent facility that is capable of accommodating up to ten combustion and fluid science investigations per year. FCF research in combustion and fluid science supports NASA's Exploration of Space Initiative for on-orbit fire suppression, fire safety, and space system fluids management. The Combustion Integrated Rack (CIR) is one of two racks in the FCF. The CIR major structural elements include the International Standard Payload Rack (ISPR), Experiment Assembly (optics bench and combustion chamber), Air Thermal Control Unit (ATCU), Rack Door, and Lower Structure Assembly (Input/Output Processor and Electrical Power Control Unit). The load path through the rack structure is outlined. The CIR modal survey was conducted to validate the load path predicted by the CIR finite element model (FEM). The modal survey is done by experimentally measuring the CIR frequencies and mode shapes. The CIR model was test correlated by updating the model to represent the test mode shapes. The correlated CIR model delivery is required by NASA JSC at Launch-10.5 months. The test correlated CIR flight FEM is analytically integrated into the Shuttle for a coupled loads analysis of the launch configuration. The analysis frequency range of interest is 0-50 Hz. A coupled loads analysis is the analytical integration of the Shuttle with its cargo element, the Mini Payload Logistics Module (MPLM), in the Shuttle cargo bay. For each Shuttle launch configuration, a verification coupled loads analysis is performed to determine the loads in the cargo bay as part of the structural certification process.

McNelis, Mark E.↗
NASA NTRS2016

Computational Evaluation of Inlet Distortion on an Ejector Powered Hybrid Wing Body at Takeoff and Landing Conditions

Due to the aft, upper surface engine location on the Hybrid Wing Body (HWB) planform, there is potential to shed vorticity and separated wakes into the engine when the vehicle is operated at off-design conditions and corners of the envelope required for engine and airplane certification. CFD simulations were performed of the full-scale reference propulsion system, operating at a range of inlet flow rates, flight speeds, altitudes, angles of attack, and angles of sideslip to identify the conditions which produce the largest distortion and lowest pressure recovery. Pretest CFD was performed by NASA and Boeing, using multiple CFD codes, with various turbulence models. These data were used to make decisions regarding model integration, characterize inlet flow distortion patterns, and help define the wind tunnel test matrix. CFD was also performed post-test; when compared with test data, it was possible to make comparisons between measured model-scale and predicted full-scale distortion levels. This paper summarizes these CFD analyses.

Wind Tunnel Testing↗
NASA NTRS1987

Results of acoustic tests of a Prop-Fan model

Results of acoustic tests in a low speed open jet anechoic wind tunnel are presented for a counter rotation Prop-Fan model. The model tested had 5 front and 5 rear rotor blades with swept planform. Noise spectra are presented showing the influence of operating and configuration variables such as: (1) power absorption, (2) tip speed, (3) rotor-rotor spacing, (4) power split between the front and rear blade rows, (5) variation of the RPM ratio between front and rear blade rows, (6) tractor versus pusher (pylon effects), and (7) angle of attack. In addition to model scale results, calculated levels derived from test are presented showing the influence of the above variables on Effective Perceived Noise Level of a 13.1 ft diameter Prop-Fan at a flyover distance of 1500 ft. It was found that the strongest effects are caused by tip speed and power absorption. A significant finding was that there is an optimum operating tip speed for minimum noise for a given power absorption. Effects of other parametric variations are generally small but measurable. In order to minimize noise to meet airplane certification limits, operation at moderate tip speeds and power absorption is shown to be desirable. Accuracy of predicted Effective Perceived Noise Level is shown to be good with the best accuracy in the 590 to 670 ft/sec tip speed range.

Metzger, F.B.↗
NASA NTRS2012

Laser Ablation Surface Preparation of Ti-6A1-4V for Adhesive Bonding

Adhesive bonding offers many advantages over mechanical fastening, but requires certification before it can be incorporated in primary structures for commercial aviation without disbond-arrestment features or redundant load paths. Surface preparation is widely recognized as the key step to producing robust and predictable bonds. Laser ablation imparts both topographical and chemical changes to a surface which can lead to increased bond durability. A laser based process provides an alternative to chemical-dip, manual abrasion and grit blast treatments which are expensive, hazardous, polluting, and less precise. This report documents preliminary testing of a surface preparation technique using laser ablation as a replacement for the chemical etch and abrasive processes currently applied to Ti-6Al-4V alloy adherends. Failure mode, surface roughness, and chemical makeup were analyzed using fluorescence enhanced visualization, microscopy, and X-ray photoelectron spectroscopy, respectively. Single lap shear tests were conducted on bonded and aged specimens to observe bond strength retention and failure mode. Some promising results showed increasing strength and durability of lap shear specimens as laser ablation coverage area and beam intensity increased. Chemical analyses showed trends for surface chemical species which correlated with improved bond strength and durability. Combined, these results suggest that laser ablation is a viable process for inclusion with or/and replacement of one or more currently used titanium surface treatments. On-going work will focus on additional mechanical tests to further demonstrate improved bond durability.

Palmieri, Frank L.↗
NASA NTRS2019

Optically Enhanced Bonding Workstation for Robust Bonding

Process control is one of the methods recommended by the FAA to reduce risk in fabrication of structurally bonded composite joints for aircraft structure based on guidance provided in circular AC-107B for certification of structurally bonded joints. An Optically Enhanced Bonding Workstation is presented here that reduces the risk in bonded joint fabrication. Results will be presented demonstrating the benefits of process monitoring and its ability to reduce risk in performing pre-bond composite surface preparation steps. This supports reduction in the timeline to certification of bonded composite structures through development of a robust bonding process upstream of any part certification steps. Sanding surface preparation has been identified as a high risk process step that is known to impact bond performance. Control of sanding during surface preparation can be performed using portable surface analysis tools previously identified including included gloss, color, Fourier Transform Infrared spectroscopy (FTIR) and optically stimulated electron emissions (OSEE). Threshold limits for the surface analysis tool measurements were determined based on an example objective bonding system utilizing a common EA9394 paste adhesive measured using standard double cantilever beam fracture toughness testing. The patented Optically Enhanced Bonding Workstation (OEBW), was tailored to monitor and control the epoxy composite surface preparation step. Surface analysis tool threshold limits were incorporated into the OEBW to demonstrate improved composite bond performance through process control. The surface analysis tools investigated here can easily be incorporated into an automated system due to their applicability to rapidly quantify the composite sanded surface treatment and their portability.

Kutscha, Eileen O.↗
DOE OSTI2019

Window Attachments: The Next Big Energy-Savings Measure?

Windows in residential buildings are estimated to generate 29% of all HVAC heating and cooling load, approximately 2.67 quadrillion Btu (Apte and Arasteh 2006). Although more than a third of residential windows are single pane, very few utility programs offer incentives for installation of energy-efficient windows (Bickel et al. 2013). The reason is simple: unless someone is already planning to replace their windows, the payback can often take a decade, if not longer. Preliminary data indicates that some energy-efficient window attachments, such as low- emissivity (low-e) storm windows and interior panels, cellular shades, interior and exterior roller shades and shutters, window films, solar screens, window quilts, and awnings, can deliver cost-effective energy savings. Additionally, the means to reliably identify and compare energy-efficient window attachment products will soon be available through the Attachment Energy Rating Council (AERC), a public interest energy performance rating and certification organization co-funded by the U.S. Department of Energy (DOE) and the window attachment industry. This paper presents, for the first time, national and regional energy savings estimates for cellular shades and low-emissivity storm windows and panels using existing data on household energy savings potential. This paper is an early step in the process of determining the cost-effectiveness of window attachments for utility programs. The next step is for utilities to develop pilot programs to conduct field tests of these products, which will generate the energy savings data to determine if full-scale programs are cost-effective.

Bickel, Stephen↗
DOE OSTI2017

Utilizing Commercial Real Estate Owner and Investor Data to Analyze the Financial Performance of Energy Efficient, High-Performance Office Buildings

Evidence has shown that owning and operating energy-efficient, high-performance, “green” properties results in multiple benefits including lower utility bills, higher rents, improved occupancy, and greater net operating income. However, it is difficult to isolate and control moderating factors to identify the specific drivers behind improved financial performance and value to investors that results from sustainability in real estate. DOE is interested in facilitating deeper investigation of the correlation between energy efficiency and financial performance, reducing data acquisition and matching challenges, and developing a stronger understanding of how sustainable design and energy efficiency impact value. DOE commissioned this pilot study to test the logistical and empirical procedures required to establish a Commercial Real Estate Data Aggregation & Trends Analysis lab, determine the potential benefits available through the lab, and contribute to the existing body of evidence in this field.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
NASA NTRS2005

Trial by Fire

The NASa/ATK Thiokol space shuttle solid rocket motor program has doubled ground test firings and enhanced manufacturing quality and process control to increase safety for Discovery's return to flight. There are a number of places where we've strengthened our engineering and our processes, says Mike Kahn, ATK Thiokol vice president of space launch systems. Protecting the booster against corrosion in the humid Florida environment is one area that has been addressed. Since the loss of Columbia, ATK Thiokol and the Marshall Space Flight Center have completely reevaluated the shuttle solid rocket motor's design certification and found no major problems, Kahn said. The Thiokol solid motors did not play a role in the 2003 Columbia accident, but the motor's older field joint design (since replaced) was the primary cause of the 1986 Challenger accident that killed seven astronauts. The 129 X 12-ft. ATK Thiokol reusable solid rocket motor forms the core of the shuttle's two solid rocket boosters (SRBs). United Space Alliance (USA) has overall responsibility for the booster's nose-mounted systems such as recovery parachutes and aft-mounted thrust vector control systems that increase the length to 149 ft. USA and its subcontractors have also reaffirmed quality control on systems such as the booster's Hamilton Sundstrand hydraulic power units for critical thrust vector control. And to ensure greater safeguards against booster debris jeopardizing the orbiter, a bolt-catcher system to restrain the large bolts, severed at booster separation, was also redesigned.

Covault, Craig↗
NASA NTRSDate not supplied

Real Time Nitrogen Monitoring and Quality Control System for NASA Astromaterials Collection

The Nitrogen system is a vital utility supporting the curation office within NASA's Astromaterials Re-search and Exploration Science (ARES) Division at the Johnson Space center (JSC). Since the Apollo samples were returned in 1969. It has played an essential role in preserving NASA’s astromaterial collections (now nine collections) by maintaining contamination-free, controlled environments required for long term curation and advanced scientific research. To meet the stringent purity requirements for contamination control, high purity modified Grade C Liquid Nitrogen (LN2) is delivered weekly by an industrial gas vendor to a 15,000-gallon tank located outside at NASA JSC near the ARES facility. This nitrogen is vital for creating an inert atmosphere to store the collection in, ensuring they are continuously shielded from contaminants and alterations through a constant N2purge. For most of the past 65 years deliveries of LN2 have required a CoA (Certificate of Analysis) prior to delivery. If those were not available, then LN2 deliver were sent to third-party laboratories for verification, creating an operational bottleneck and quality gap. To address this challenge and maintain rigorous quality control, NASA JSC Infrastructure and Astromaterials Acquisition & Curation Office initiated the development of an on-site Analytical Gas Sampling (AGS) Laboratory. Designed to streamline quality verification if a CoA unavailable, the AGS lab was constructed by a subcontractor in Newton, NJ. After a successful factory acceptance test conducted by the NASA ARES Infrastructure team, the lab was trans-ported to NASA JSC, where it was anchored and integrated into the site’s nitrogen pressure system using stainless steel, oxygen-cleaned tubing. The ARES nitrogen system was modified to provide parallel flows to the AGS lab for quality control and to the astromaterials collection labs for maintaining an inert environment. The AGS lab features two operational modes: (1)Primary: Gaseous Nitrogen (GN2) Quality Monitoring –The AGS system continuously samples the site’s GN2 supply every 15 minutes to ensure compliance with required purity levels. (2) Secondary: LN2 Quality Verification when a comprehensive CoA is not available, a cryogenic vaporizer converts LN2 to GN2, which is then analyzed for impurities: H₂, Ar, O₂, CO, CO₂, H₂O, and total hydrocarbons (THC). By significantly enhancing on-site analytical capabilities, the AGS lab eliminates reliance on external testing, ensures uninterrupted quality monitoring of the nitrogen pressure system, and reinforces NASA’s commitment to preserving pristine astromaterials under the highest standards of curation and research integrity.

glove box↗
DOE OSTI2017

Comparison of Exhibited Wear in Tefzel?, Kynar?, and UHMWPE Valve Seats Exposed to Cyclic Operations with Abrasive Slurry - 17519

Pacific Northwest National Laboratory (PNNL) conducted abrasive-wear testing of ball valves used for double valve isolation in nuclear waste process lines. The valve seat materials consisted of Kynar{sup R}, Tefzel{sup R}, and ultra-high-molecular-weight polyethylene (UHMWPE). Cycle testing was conducted for 1500 operating cycles for the Kynar{sup R} and Tefzel{sup R} valve seats and 5500 cycles for the UHMWPE valve seats. A valve operational cycle consisted of slurry flow, slurry gravity drain, flush water flow, and flush water gravity drain. Both two-way and three-way valves were evaluated, and valves were configured in simulated manifolds so the impact of serving various operational functions (e.g., slurry, flush, or drain control) could be evaluated as some valves are flushed prior to being cycled and others are not. Testing was conducted in PNNL's Multi-Phase Transport Evaluation Loop Facility using a performance-based simulant developed by PNNL specifically for this test program to emulate abrasive slurries for Hanford Tank Farms Waste Transfer System during single-shell tank retrieval and waste feed delivery to the Hanford Tank Waste Treatment and Immobilization Plant. Pre- and post-test valve tear-down evaluations were conducted to observe changes in the condition of internal components for the various seat materials. The various forms of physical wear observed for the different seat materials are presented. The wear results can be used to assess seat materials and valve configurations for application to waste transfer operations, and the observed wear mechanisms can provide insight into assessing valve service life. This information will be used to identify and select additional valve designs that should be evaluated for certification for future use. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Misclassification of causes of death among a small all-autopsied group of former nuclear workers: Death certificates vs. autopsy reports

The U.S. Transuranium and Uranium Registries performs autopsies on each of its deceased Registrants as a part of its mission to follow up occupationally-exposed individuals. This provides a unique opportunity to explore death certificate misclassification errors, and the factors that influence them, among this small population of former nuclear workers. Underlying causes of death from death certificates and autopsy reports were coded using the 10 th revision of the International Classification of Diseases (ICD-10). These codes were then used to quantify misclassification rates among 268 individuals for whom both full autopsy reports and death certificates with legible underlying causes of death were available. When underlying causes of death were compared between death certificates and autopsy reports, death certificates correctly identified the underlying cause of death’s ICD-10 disease chapter in 74.6% of cases. The remaining 25.4% of misclassified cases resulted in over-classification rates that ranged from 1.2% for external causes of mortality to 12.2% for circulatory disease, and under-classification rates that ranged from 7.7% for external causes of mortality to 47.4% for respiratory disease. Neoplasms had generally lower misclassification rates with 4.3% over-classification and 13.3% under-classification. A logistic regression revealed that the odds of a match were 2.8 times higher when clinical history was mentioned on the autopsy report than when it was not. Similarly, the odds of a match were 3.4 times higher when death certificates were completed using autopsy findings than when autopsy findings were not used. This analysis excluded cases where it could not be determined if autopsy findings were used to complete death certificates. The findings of this study are useful to investigate the impact of death certificate misclassification errors on radiation risk estimates and, therefore, improve the reliability of epidemiological studies.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗