Search NASA⌕ Search

SEARCH · Search NASA

Results for “delta method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Oxygen stoichiometry control of nanometric oxide compounds: The case of titanium ferrites

Three techniques have been coupled with an original device, based on H{sub 2}/H{sub 2}O equilibrium, controlling oxygen partial pressure: XRD, TGA and DC conductivity in order to characterize very reactive compounds such as nanometric powders. From XRD, both the structure and the oxygen stoichiometry (thanks to their lattice parameter) were investigated in situ. From TGA, it was the oxygen stoichiometry (thanks to mass gain or loss) which was determined. From DC conductivity, it was both the structure and the oxygen stoichiometry (thanks to the activation energy) which were obtained. The advantages were to determine very rapidly and with a small amount of powder the equilibrium conditions (T, pO{sub 2}) necessary to obtain the desired phase and stoichiometry. These methods have been evaluated for nanometric titanium ferrites. Two phenomena have been observed during the reducing process: the precipitation of a rhombohedral phase and a significant grain growth linked together. - Graphical abstract: XRD patterns of Fe{sub 3(1-{delta})}O{sub 4} nanometric powders obtained in situ during a reducing treatment. The stoichiometric compound was obtained by a thermal annealing at 460 deg. C under pO{sub 2}=3x10{sup -26} Pa ({Phi}{sub DRX}=100 nm). In inset, data of the experimental lattice parameter compared to the theoretical one. {alpha} represents the rhomboedrical phase which precipitates during this thermal treatment, then disappeared. Highlights: > The control of the deviation from oxygen stoichiometry is rarely consider in literature. > At the nanometric scale, it is necessary to develop synthesis routes under appropriate atmosphere. > These synthesis must be coupled with in situ characterization tools. > It opens the door to fast and precise studies concerning the evolution of nanometric materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular beam epitaxial growth of metamorphic AlInSb/GaInSb high-electron-mobility-transistor structures on GaAs substrates for low power and high frequency applications

We report on molecular beam epitaxial growth of AlInSb/GaInSb metamorphic high-electron-mobility-transistor structures for low power, high frequency applications on 4 in. GaAs substrates. The structures consist of a Ga{sub 0.4}In{sub 0.6}Sb channel embedded in Al{sub 0.4}In{sub 0.6}Sb barrier layers which are grown on top of an insulating metamorphic buffer, which is based on the linear exchange of Ga versus In and a subsequent exchange of As versus Sb. Precise control of group V fluxes and substrate temperature in the Al{sub 0.4}In{sub 0.6}As{sub 1-x}Sb{sub x} buffer is essential to achieve high quality device structures. Good morphological properties were achieved demonstrated by the appearance of crosshatching and root mean square roughness values of 2.0 nm. Buffer isolation is found to be >100 k{Omega}/{open_square} for optimized growth conditions. Hall measurements at room temperature reveal electron densities of 2.8x10{sup 12} cm{sup -2} in the channel at mobility values of 21.000 cm{sup 2}/V s for single-sided Te volume doping and 5.4x10{sup 12} cm{sup -2} and 17.000 cm{sup 2}/V s for double-sided Te {delta}-doping, respectively.

36 MATERIALS SCIENCE↗

Demixing-stimulated lane formation in binary complex plasma

Recently lane formation and phase separation have been reported for experiments with binary complex plasmas in the PK3-Plus laboratory onboard the International Space Station (ISS). Positive non-additivity of particle interactions is known to stimulate phase separation (demixing), but its effect on lane formation is unknown. In this work, we used Langevin dynamics (LD) simulation to probe the role of non-additivity interactions on lane formation. The competition between laning and demixing leads to thicker lanes. Analysis based on anisotropic scaling indices reveals a crossover from normal laning mode to a demixing-stimulated laning mode. Extensive numerical simulations enabled us to identify a critical value of the non-additivity parameter {Delta} for the crossover.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A RE-EVALUATION OF THE EVOLVED STARS IN THE GLOBULAR CLUSTER M13

We have analyzed photometry from space- and ground-based cameras to identify all bright red giant branch (RGB), horizontal branch (HB), and asymptotic giant branch (AGB) stars within 10' of the center of the globular cluster M13. We identify a modest (7%) population of HB stars redder than the primary peak (including RR Lyrae variables at the blue end of the instability strip) that is somewhat more concentrated to the cluster core than the rest of the evolved stars. We find support for the idea that they are noticeably evolved and in the late stages of depleting helium in their cores. This resolves a disagreement between distance moduli derived from the tip of the RGB and from stars in or near the RR Lyrae instability strip. We identified disagreements between HB model sets on whether stars with T{sub eff} {approx}< 10, 000 K (near the 'knee' of the HB in optical CMDs) should evolve redward or blueward, and the differences may depend on the inclusion of diffusion in the stellar interior. The sharp cut at the red end of M13's HB provides strong evidence that stars from the dominant HB group still must be undergoing blue loops, which implies that diffusion is being inhibited. We argue that M13's HB is a somewhat pathological case-the dominant HB population occurs very near the 'knee' in optical CMDs, and evolved stars exclusively appear redward of that peak, leading to the incorrect appearance of a continuation of the unevolved HB. We identify two stars as 'blue hook' star candidates-the faintest stars in optical bands that remain significantly subluminous in the shortest ultraviolet wavelength photometry available. M13 also has a distinct group of stars previously identified with the 'second U jump'. Based on far-UV photometry, we find that these stars have genuinely high temperatures (probably 26,000 K {approx}<T{sub eff} {approx}< 31, 000 K), and are not produced by a jump in brightness at lower temperature (T{sub eff} {approx} 22, 000 K) as previously suggested. These stars are brighter than other stars of similar color (either redder or bluer), and may be examples of 'early hot flashers' that ignite core helium fusion shortly after leaving the RGB. We used ultraviolet photometry to identify hot post-HB stars, and based on their numbers (relative to canonical AGB stars) we estimate the position on the HB where the morphology of the post-HB tracks change to I {approx} 17.3, between the two peaks in the HB distribution. Concerning the possibility of helium enrichment in M13, we revisited the helium-sensitive R ratio, applying a new method for correcting star counts for larger lifetimes of hot HB stars. We find that M13's R ratio is in agreement with theoretical values for primordial helium abundance Y{sub P} = 0.245 and inconsistent with a helium enhancement {Delta}Y = 0.04. The brightness of the HB (both in comparison to the end of the canonical HB and to the tip of the RGB) also appears to rule out the idea that the envelopes of the reddest HB stars have been significantly enriched in helium. The absolute colors of the turnoffs of M3 and M13 potentially may be used to look for differences in their mean helium abundances, but there are inconsistencies in current data sets between colors using different filters that prevent a solid conclusion. The numbers of stars on the lower RGB and in the red giant bump agree very well with recent theoretical models, although there are slight indications of a deficit of red giant stars above the bump. There is not convincing evidence that a large fraction of stars leave the RGB before undergoing a core helium flash.

79 ASTRONOMY AND ASTROPHYSICS↗

Abort-once-around entry dispersion corridor analysis

Abort-Once-Around (AOA) entry dispersion corridors were determined for Shuttle Mission 3A. These corridors are presented as plots of entry interface flight path angle versus range to target. The methods used to determine the corridors are discussed. Major dispersion sources are discussed and results presented. While specific trajectory inputs and constraints are subject to change, the dispersion corridors show the trends under consideration. The corridors presented show the delta V advantage of the two-burn over the one-burn AOA. The atmospheric dispersion study illustrates the need to target for the seasonal atmosphere. The 40 deg/30 deg angle of attack (alpha) (TPS design) profile did not provide adequate crossrange capability with worst case aerodynamic dispersions. This problem was alleviated with the change to a 38 deg/28 deg alpha profile. The backface temperatures calculated were generally higher than the present limits.

Kyle, H. C.↗

Some design characteristics of the AMPTE turn and orbit change maneuvers

The maneuvers carried out by the Active Magnetospheric Particle Tracer Explorers (AMPTE) including the Charge Composition Explorer (CCE) and the Ion Release Module (IRM) spacecraft are analyzed. Analytic and graphical methods are developed in order to carry out sensitivity analyses that helped design the nominal maneuvers, by taking into account errors in burn initiating time, motor performance, and spin axis pointing. A tradeoff analysis between errors in timing and Delta V magnitude is shown for the IRM orbit transfer, and a technique that allows for the determination of the attitude of spinner spacecraft by way of the observed Doppler shift resulting from an unbalanced turn is investigated.

Kechichian, J. A.↗

A fast radiation parameterization for atmospheric circulation models

Several currently available broadband parameterizations for longwave and shortwave radiation have been combined to produce a computationally fast radiation parameterization that is well suited for atmospheric circulation models. The main features of the parameterization are the ability to include overlapping partly cloudy layers in the longwave, the use of a delta-Eddington technique to treat clouds in the shortwave, and a computational structure that is amenable to vectorization on supercomputers. Selected results of off-line one-dimensional computations using the code have been compared with more rigorous methods as part of an international intercomparison program and found to be quite accurate.

HARSHVARDHAN↗

Vapor pressures of acetylene at low temperatures

The atmospheres of many of the outer planets and their satellites contain a large number of hydrocarbon species. In particular, acetylene (C2H2) has been identified at Jupiter, Saturn and its satellite Titan, Uranus and Neptune. In the lower atmospheres of these planets, where colder temperatures prevail, the condensation and/or freezing of acetylene is probable. In order to obtain accurate models of the acetylene in these atmospheres, it is necessary to have a complete understanding of its vapor pressures at low temperatures. Vapor pressures at low temperatures for acetylene are being determined. The vapor pressures are measured with two different techniques in order to cover a wide range of temperatures and pressures. In the first, the acetylene is placed in a sample tube which is immersed in a low temperature solvent/liquid nitrogen slush bath whose temperature is measured with a thermocouple. The vapor pressure is then measured directly with a capacitance manometer. For lower pressures, a second technique which was called the thin-film infrared method (TFIR) was developed. It involves measuring the disappearance rate of a thin film of acetylene at a particular temperature. The spectra are then analyzed using previously determined extinction coefficient values, to determine the disappearance rate R (where R = delta n/delta t, the number of molecules that disappear per unit time). This can be related to the vapor pressure directly. This technique facilitates measurement of the lower temperatures and pressures. Both techniques have been calibrated using CO2, and have shown good agreement with the existing literature data.

Masterson, C. M.↗

A rapid radiative transfer model for reflection of solar radiation

A rapid analytical radiative transfer model for reflection of solar radiation in plane-parallel atmospheres is developed based on the Sobolev approach and the delta function transformation technique. A distinct advantage of this model over alternative two-stream solutions is that in addition to yielding the irradiance components, which turn out to be mathematically equivalent to the delta-Eddington approximation, the radiance field can also be expanded in a mathematically consistent fashion. Tests with the model against a more precise multistream discrete ordinate model over a wide range of input parameters demonstrate that the new approximate method typically produces average radiance differences of less than 5%, with worst average differences of approximately 10%-15%. By the same token, the computational speed of the new model is some tens to thousands times faster than that of the more precise model when its stream resolution is set to generate precise calculations.

Xiang, X.↗

Design of the VISITOR Tool: A Versatile ImpulSive Interplanetary Trajectory OptimizeR

The design of trajectories for interplanetary missions represents one of the most complex and important problems to solve during conceptual space mission design. To facilitate conceptual mission sizing activities, it is essential to obtain sufficiently accurate trajectories in a fast and repeatable manner. To this end, the VISITOR tool was developed. This tool modularly augments a patched conic MGA-1DSM model with a mass model, launch window analysis, and the ability to simulate more realistic arrival and departure operations. This was implemented in MATLAB, exploiting the built-in optimization tools and vector analysis routines. The chosen optimization strategy uses a grid search and pattern search, an iterative variable grid method. A genetic algorithm can be selectively used to improve search space pruning, at the cost of losing the repeatability of the results and increased computation time. The tool was validated against seven flown missions: the average total mission (Delta)V offset from the nominal trajectory was 9.1%, which was reduced to 7.3% when using the genetic algorithm at the cost of an increase in computation time by a factor 5.7. It was found that VISITOR was well-suited for the conceptual design of interplanetary trajectories, while also facilitating future improvements due to its modular structure.

Corpaccioli, Luca↗

A method for calculation of free-space sound pressures near a propeller in flight including considerations of the chordwise blade loading

This report presents tabulated values of certain definite integral that are involved in the calculation of near-field propeller noise when the chordwise forces are assumed to be either uniform or of a Dirac delta type. The tabulations are over a wide range of operating conditions and are useful for estimating propeller noise when either the concept of an effective radius or radial distributions of forces are considered. Use of the tabulations is illustrated by several examples of calculated results for some specific propellers.

NOISE↗

PHOTOMETRIC REDSHIFTS FOR QUASARS IN MULTI-BAND SURVEYS

The Multi Layer Perceptron with Quasi Newton Algorithm (MLPQNA) is a machine learning method that can be used to cope with regression and classification problems on complex and massive data sets. In this paper, we give a formal description of the method and present the results of its application to the evaluation of photometric redshifts for quasars. The data set used for the experiment was obtained by merging four different surveys (Sloan Digital Sky Survey, GALEX, UKIDSS, and WISE), thus covering a wide range of wavelengths from the UV to the mid-infrared. The method is able (1) to achieve a very high accuracy, (2) to drastically reduce the number of outliers and catastrophic objects, and (3) to discriminate among parameters (or features) on the basis of their significance, so that the number of features used for training and analysis can be optimized in order to reduce both the computational demands and the effects of degeneracy. The best experiment, which makes use of a selected combination of parameters drawn from the four surveys, leads, in terms of {Delta}z{sub norm} (i.e., (z{sub spec} - z{sub phot})/(1 + z{sub spec})), to an average of {Delta}z{sub norm} = 0.004, a standard deviation of {sigma} = 0.069, and a median absolute deviation, MAD = 0.02, over the whole redshift range (i.e., z{sub spec} {<=} 3.6), defined by the four-survey cross-matched spectroscopic sample. The fraction of catastrophic outliers, i.e., of objects with photo-z deviating more than 2{sigma} from the spectroscopic value, is <3%, leading to {sigma} = 0.035 after their removal, over the same redshift range. The method is made available to the community through the DAMEWARE Web application.

79 ASTRONOMY AND ASTROPHYSICS↗

Kondo universality, energy scales, and intermediate valence in plutonium

On the basis of the concepts of an intermediate-valence (IV) regime, an analysis is carried out of macroscopic properties of the {alpha} and {delta} phases of plutonium, as well as of several model systems based on rare earth elements. Within a single-site approximation (SSA), the characteristic Kondo interaction energy, the f-electron shell occupation number, the effective degeneracy of the ground-state f multiplet, and the crystal field splitting energy are estimated. The ground state in plutonium is considered as a quantum-mechanical superposition of states with different valences. The temperature dependence of the static magnetic susceptibility of {delta} plutonium is calculated. It is shown that {delta} plutonium satisfies the Wilson and Kadowaki-Woods universal relations, whereby it can be classified as a Kondo system. At the same time, the problem of the position of plutonium in the general classification of solids, as well as the problem of the temperature dependence of magnetic susceptibility of {delta} plutonium, remains open. The concept of multiple intermediate valence (MIV) is put forward as a possible means for solving the above problems. The MIV regime is characterized by fluctuations from the basic configuration 3+ to the states 4+ and 2+, which make a fundamental difference between plutonium and 4f electron systems based, say, on samarium.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

MICROX-2 cross section library based on ENDF/B-VII

New cross section libraries of a neutron transport code MICROX-2 have been generated for advanced reactor design and fuel cycle analyses. A total of 386 nuclides were processed, including 10 thermal scattering nuclides, which are available in ENDF/B-VII release 0 nuclear data. The NJOY system and MICROR code were used to process nuclear data and convert them into MICROX-2 format. The energy group structure of the new library was optimized for both the thermal and fast neutron spectrum reactors based on Contributon and Point-wise Cross Section Driven (CPXSD) method, resulting in a total of 1173 energy groups. A series of lattice cell level benchmark calculations have been performed against both experimental measurements and Monte Carlo calculations for the effective/infinite multiplication factor and reaction rate ratios. The results of MICROX-2 calculation with the new library were consistent with those of 15 reference cases. The average errors of the infinite multiplication factor and reaction rate ratio were 0.31% {delta}k and 1.9%, respectively. The maximum error of reaction rate ratio was 8% for {sup 238}U-to-{sup 235}U fission of ZEBRA lattice against the reference calculation done by MCNP5. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

PISCES two-detector covariance matrix fit for the NOvA Experiment

NOvA is a long-baseline neutrino oscillation experiment with two functionally identical detectors: a Near Detector (ND) at Fermilab, placed 1 km from the neutrino source, and a Far Detector (FD) located 810 km away from the ND in Minnesota. NOvA's primary physics goals are the precise measurements of neutrino oscillation parameters $\theta_{23}$ and $\Delta m^2_{32}$ , determine the neutrino mass ordering, and constrain the value of $\delta_{CP}$, via the study of muon neutrino to electron neutrino oscillation. In the standard NOvA three-flavor analysis, oscillation parameters are extracted using an extrapolation technique in which the ND data constrain the FD prediction through a ratio method. While this allows for systematic uncertainties sharing the same effects in both detectors to cancel, it remains an FD-only fit and does not fully leverage the constraining power of the high-statistics ND. This analysis proposes a simultaneous ND+FD fit using the PISCES method. PISCES (Parameter Inference with Systematic Covariance and Exact Statistics) is a framework designed to support complex configurations such as a joint ND+FD fit. This allows PISCES to take full advantage of the ND data to directly constrain systematic uncertainties across all samples. In PISCES, systematic uncertainties are encoded in a fractional covariance matrix, and statistical uncertainties are handled with a Poisson likelihood, making the approach well suited for low-statistics samples. For interpretability, we further use a Newton–Raphson + PCA method to recover per-systematic pulls from the covariance formulation. This poster presents the full PISCES joint ND+FD fit for the NOvA three-flavor analysis, describes its implementation and evaluates its performance through extensive robustness tests and fake data studies. It also provides a comparison between the PISCES joint ND+FD results and the standard NOvA extrapolation method.

Rajaoalisoa, Miriama [Cincinnati U.] (ORCID:000000↗

Surface-flow, pressure, and heat-transfer studies on two conical delta wings at a Mach number of 6

An experimental investigation of the surface flow, pressures, and heat transfer on two conical delta wings having attached leading-edge shocks has been conducted at a Mach number of 6. The angle of attack was varied between 0 deg and 12 deg. The pressure data were compared with predictions obtained by the method-of-lines technique, and the heating data were compared with the heating levels predicted by the Spalding-Chi method.

Hefner, J. N.↗

Comparison of numerical techniques for integration of stiff ordinary differential equations arising in combustion chemistry

The efficiency and accuracy of several algorithms recently developed for the efficient numerical integration of stiff ordinary differential equations are compared. The methods examined include two general-purpose codes, EPISODE and LSODE, and three codes (CHEMEQ, CREK1D, and GCKP84) developed specifically to integrate chemical kinetic rate equations. The codes are applied to two test problems drawn from combustion kinetics. The comparisons show that LSODE is the fastest code currently available for the integration of combustion kinetic rate equations. An important finding is that an interactive solution of the algebraic energy conservation equation to compute the temperature does not result in significant errors. In addition, this method is more efficient than evaluating the temperature by integrating its time derivative. Significant reductions in computational work are realized by updating the rate constants (k = at(supra N) N exp(-E/RT) only when the temperature change exceeds an amount delta T that is problem dependent. An approximate expression for the automatic evaluation of delta T is derived and is shown to result in increased efficiency.

Radhakrishnan, K.↗

Sonic boom predictions using a solution-adaptive full-potential code

The TranAir full-potential code, which utilizes a solution-adaptive, unstructured Cartesian grid, was used to compute near-field pressure signatures of three generic geometries: (1) a cone-cylinder; (2) a low aspect ratio rectangular wing; and (3) a delta-wing/body. Pressure signatures computed by TranAir are extrapolated to near- and midfield distances using a quasilinear extrapolation technique. Results are compared with wind-tunnel data and, where possible, with extrapolated wind-tunnel data and Whitham-method results. In general, extrapolated TranAir data is in good agreement with experimental and Whitham-method pressure signatures, but peak pressures are slightly underpredicted. It is felt that data computed too close to the model caused some of the discrepancies. The flowfield grid structure was also found to be an important issue in obtaining accurate off-body data. Results were encouraging enough to proceed with the application of TranAir to conceptual configurations in support of the NASA high speed research program (HSRP).

Madson, Michael D.↗