Search NASA⌕ Search

SEARCH · Search NASA

Results for “diffusion medium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

EFFICIENT COSMIC RAY ACCELERATION, HYDRODYNAMICS, AND SELF-CONSISTENT THERMAL X-RAY EMISSION APPLIED TO SUPERNOVA REMNANT RX J1713.7-3946

We model the broadband emission from supernova remnant (SNR) RX J1713.7-3946 including, for the first time, a consistent calculation of thermal X-ray emission together with non-thermal emission in a nonlinear diffusive shock acceleration model. Our model tracks the evolution of the SNR including the plasma ionization state between the forward shock and the contact discontinuity. We use a plasma emissivity code to predict the thermal X-ray emission spectrum assuming the initially cold electrons are heated either by Coulomb collisions with the shock-heated protons (the slowest possible heating), or come into instant equilibration with the protons. For either electron heating model, electrons reach {approx}>10{sup 7} K rapidly and the X-ray line emission near 1 keV is more than 10 times as luminous as the underlying thermal bremsstrahlung continuum. Since recent Suzaku observations show no detectable line emission, this places strong constraints on the unshocked ambient medium density and on the relativistic electron-to-proton ratio. For the uniform circumstellar medium (CSM) models that we consider, the low densities and high relativistic electron-to-proton ratios required to match the Suzaku X-ray observations definitively rule out pion decay as the emission process producing GeV-TeV photons. We show that leptonic models, where inverse-Compton scattering against the cosmic background radiation dominates the GeV-TeV emission, produce better fits to the broadband thermal and non-thermal observations in a uniform CSM.

79 ASTRONOMY AND ASTROPHYSICS↗

Release history and transport parameters of relativistic solar electrons inferred from near-the-sun in situ observations

We study four consecutive 300–800 keV electron events observed on 1980 May 28 by Helios-1, when the spacecraft was located at 0.31 au from the Sun. We use two different techniques to extract the release time history of electrons at the Sun: (1) a data-driven method based on the assumption that particles conserve their magnetic moment as they propagate between the Sun and the spacecraft and (2) an inversion method that utilizes particle transport simulation results. Both methods make use of the particle angular distributions measured relative to the local direction of the magnetic field. The general characteristics of the release time profiles obtained by these two techniques are similar, especially during their rising phases. We find indications that the strength of the interplanetary scattering varies with the size of the solar parent event, suggesting that scattering processes are not necessarily an inherent property of the medium but are related to the amount of released particles at the Sun. We use the inferred release profiles to compute the expected intensities at 1 au. In contrast to simultaneous near-Earth observations by the Interplanetary Monitoring Platform (IMP-8), our simulations predict the observation of four separate events at 1 au. Processes that could contribute to the observation of one single time-extended event at 1 au include (1) distinct magnetic connections of the spacecraft to the particle sources, (2) the spatio-temporal evolution of the particle sources, and (3) different particle transport conditions, including a variation of λ{sub r} with radial distance and/or heliolongitude, as well as the possibility that electrons reached IMP-8 by diffusion perpendicular to the interplanetary magnetic field.

79 ASTRONOMY AND ASTROPHYSICS↗

Effects of Irradiation on the Microstructure of U-7Mo Dispersion Fuel with Al-2Si Matrix

The Reduced Enrichment for Research and Test Reactor program is developing low-enriched uranium U-Mo dispersion fuels for application in research and test reactors around the world. As part of this development, fuel plates have been irradiated in the Advanced Test Reactor and then characterized using optical metallography (OM) and scanning electron microscopy (SEM) to determine the as-irradiated microstructure. To demonstrate the irradiation performance of U-7Mo dispersion fuel plates with 2 wt% Si added to the matrix, fuel plates were tested to medium burnups at intermediate fission rates as part of the RERTR-6 experiment. Further testing was performed to higher fission rates as part of the RERTR-7A experiment, and very aggressive testing (high temperature, high fission density, high fission rate) was performed in the RERTR-9A, RERTR-9B and AFIP-1 experiments. As-irradiated microstructures were compared to those observed after fabrication to determine the effects of irradiation on the microstructure. Based on comparison of the microstructural characterization results for each irradiated sample, some general conclusions can be drawn about how the microstructure evolves during irradiation: there is growth of the fuel/matrix interaction layer (FMI), which was present in the samples to some degree after fabrication, during irradiation; Si diffuses from the FMI layer to deeper depths in the U-7Mo particles as the irradiation conditions are made more aggressive; lowering of the Si content in the FMI layer results in an increase in the size of the fission gas bubbles; as the FMI layer grows during irradiation more Si diffuses from the matrix to the FMI layer/matrix interface, and interlinking of fission gas bubbles in the fuel plate microstructure that may indicate breakaway swelling is not observed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Synthesis and Properties of the Helium Clathrate and Defect Perovskite [He 2– x $^\square$ x ][CaNb]F 6

The defect double perovskite [He 2– x $^\square$ x ][CaNb]F 6 , with helium on its A-site, can be prepared by the insertion of helium into ReO 3 -type CaNbF 6 at high pressure. Upon cooling from 300 to 100 K under 0.4 GPa helium, ~60% of the A-sites become occupied. Helium uptake was quantified by both neutron powder diffraction and gas insertion and release measurements. After the conversion of gauge pressure to fugacity, the uptake of helium by CaNbF 6 can be described by a Langmuir isotherm. The enthalpy of absorption for helium in [He 2– x $^\square$ x ][CaNb]F 6 is estimated to be ~+3(1) kJ mol –1 , implying that its formation is entropically favored. Helium is able to diffuse through the material on a time scale of minutes at temperatures down to ~150 K but is trapped at 100 K and below. The insertion of helium into CaNbF 6 reduces the magnitude of its negative thermal expansion, increases the bulk modulus, and modifies its phase behavior. On compressing pristine CaNbF 6 , at 50 and 100 K, a cubic (Fm$\overline{3}$m) to rhombohedral (R$\overline{3}$) phase transition was observed at <0.20 GPa. However, a helium-containing sample remained cubic at 0.4 GPa and 50 K. CaNbF 6 , compressed in helium at room temperature, remained cubic to >3.7 GPa, the limit of our X-ray diffraction measurements, in contrast to prior reports that upon compression in a nonpenetrating medium, a phase transition is detected at ~0.4 GPa.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

IDENTIFICATION OF ADSORBA TION OF ADSORBATE FT-IR BANDS USING IN-SI -IR BANDS USING IN-SITU TECHNIQUES: Pd SPECIATION AND ADSORPTION CHEMISTRY OF Pd-ZEOLITES FOR PASSIVE NOx ADSORPTION

To meet increasingly stringent automotive emissions standards, further improvements in catalytic converter design are necessary. Current automotive catalyst systems are effective at eliminating emission of nitrogen oxides (NOx) once the catalyst reaches operational temperature (~200 °C). NOx emitted at lower catalyst temperatures now comprises most of the NOx released during a typical test cycle. Referred to as “the cold start problem” this issue has come to the forefront of automotive catalyst development, as mitigating these emissions is necessary to further reduce automotive emissions. Passive NOx adsorbers present an appealing solution to the cold start problem, these being a class of materials that chemisorb exhaust components such as NOx, carbon monoxide (CO) and hydrocarbons at near-ambient temperatures, and then desorb these compounds once the downstream catalyst has reached operational temperature. An effective passive NOx adsorber must have several properties: high NOx adsorption at near-ambient temperatures, near-complete NOx desorption at temperatures within the operational range, high thermal stability, and resistance to automotive exhaust components at high temperatures. The potential environmental impact of such a system is substantial, as NOx emissions currently result in the formation of millions of tons of smog and acid rain each year. Pd-exchanged zeolites have shown promise for deployment as Passive NOx adsorbers, though much remains to be understood about their adsorption chemistry and deactivation. In-situ Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS) provides a convenient probe of adsorbed species, most automotive exhaust components possessing IR-active chemical bonds. By examining the evolution of IR bands under various pretreatments and adsorbates, the overall Pd-speciation and adsorptive zeolite sites of each material can be characterized, and the identities of IR bands can be deduced. In this work, microreactor-MS analysis of the adsorption and desorption behavior of these materials was also examined, these results being coupled with in-situ DRIFTS temperature programmed desorption (TPD) to correlate desorption events with specific adsorbed species. A pair of zeolite frameworks of similar Si/Al ratio but differing pore size were examined, Beta zeolite (BEA) and Chabazite (CHA) representing a medium- and small-pore framework, respectively. The effect of Pd-loading on BEA was examined, as well as the various deactivation pathways and active sites of each material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of Coulomb coupling on stopping power and a link to macroscopic transport

Molecular dynamics simulations are used to assess the influence of Coulomb coupling on the energy evolution of charged projectiles in the classical one-component plasma. The average projectile kinetic energy is found to decrease linearly with time when ν α /ω p ≲ 10 –2 , where να is the Coulomb collision frequency between the projectile and the medium, and ω p is the plasma frequency. Stopping power is obtained from the slope of this curve. In comparison to the weakly coupled limit, strong Coulomb coupling causes the magnitude of the dimensionless stopping power, ( a/k B T ) dE / dx , to increase, the Bragg peak to shift to several times the plasma thermal speed, and for the stopping power curve to broaden substantially. The rate of change of the total projectile kinetic energy averaged over many independent simulations is shown to consist of two measurable components: a component associated with a one-dimensional friction force and a thermal energy exchange rate. In the limit of a slow and massive projectile, these can be related to the macroscopic transport rates of self-diffusion and temperature relaxation in the plasma. Simulation results are compared with available theoretical models for stopping power, self-diffusion, and temperature relaxation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A MeerKAT-meets-LOFAR study of MS 1455.0 + 2232: a 590 kiloparsec ‘mini’-halo in a sloshing cool-core cluster

ABSTRACT Radio mini-haloes are poorly understood, moderately extended diffuse radio sources that trace the presence of magnetic fields and relativistic electrons on scales of hundreds of kiloparsecs, predominantly in relaxed clusters. With relatively few confirmed detections to-date, many questions remain unanswered. This paper presents new radio observations of the galaxy cluster MS 1455.0+2232 performed with MeerKAT (covering the frequency range 872−1712 MHz) and LOFAR (covering 120−168 MHz), the first results from a homogeneously selected mini-halo census. We find that this mini-halo extends for ∼590 kpc at 1283 MHz, significantly larger than previously believed, and has a flatter spectral index (α = −0.97 ± 0.05) than typically expected. Our X-ray analysis clearly reveals a large-scale (254 kpc) sloshing spiral in the intracluster medium. We perform a point-to-point analysis, finding a tight single correlation between radio and X-ray surface brightness with a super-linear slope of $b_{\rm 1283\, MHz} = 1.16^{+0.06}_{-0.07}$ and $b_{\rm 145\, MHz} = 1.15^{+0.09}_{-0.08}$; this indicates a strong link between the thermal and non-thermal components of the intracluster medium. Conversely, in the spectral index/X-ray surface brightness plane, we find that regions inside and outside the sloshing spiral follow different correlations. We find compelling evidence for multiple sub-components in this mini-halo for the first time. While both the turbulent (re-)acceleration and hadronic scenarios are able to explain some observed properties of the mini-halo in MS 1455.0+2232, neither scenario is able to account for all the evidence presented by our analysis.

79 ASTRONOMY AND ASTROPHYSICS↗

3D distribution of interstellar medium in the Galaxy: Preparation for analysis of Gaia observations

Accurate and detailed three-dimensional (3D) maps of Galactic interstellar medium (ISM) are still lacking. One way to obtain such 3D descriptions is to record a large set of individual absorption or reddening measurements toward target stars located at various known distances and directions. The inversion of these measurements using a tomographic method can produce spatial distribution of the ISM. Until recently absorption data were very limited and distances to the target stars are still uncertain, but the situation will greatly improve thanks to current and future massive stellar surveys from ground, and to Gaia mission. To prepare absorption data for inversion from a huge number of stellar spectra, automated tools are needed. We have developed various spectral analysis tools adapted to different type of spectra, early- or late- type star. We also have used diffuse interstellar bands (DIBs) to trace IS structures and kinematics. Although we do not know yet their carriers, they can be a promising tool to trace distant interstellar clouds or Galactic arms. We present some examples of the interstellar fitting and show the potentiality of DIBs in tracing the ISM. We will also briefly show and comment the latest 3D map of the local ISM which reveal nearby cloud complexes and cavities.

79 ASTRONOMY AND ASTROPHYSICS↗

GAMA/H-ATLAS: THE DUST OPACITY-STELLAR MASS SURFACE DENSITY RELATION FOR SPIRAL GALAXIES

We report the discovery of a well-defined correlation between B-band face-on central optical depth due to dust, {tau}{sup f}{sub B}, and the stellar mass surface density, {mu}{sub *}, of nearby (z {<=} 0.13) spiral galaxies. This relation was derived from a sample of spiral galaxies taken from the Galaxy and Mass Assembly (GAMA) survey, which were detected in the FIR/submillimeter (submm) in the Herschel-ATLAS science demonstration phase field. Using a quantitative analysis of the NUV attenuation-inclination relation for complete samples of GAMA spirals categorized according to stellar mass surface density, we demonstrate that this correlation can be used to statistically correct for dust attenuation purely on the basis of optical photometry and Sersic-profile morphological fits. Considered together with previously established empirical relationships of stellar mass to metallicity and gas mass, the near linearity and high constant of proportionality of the {tau}{sub B}{sup f} - {mu}{sub *} relation disfavors a stellar origin for the bulk of refractory grains in spiral galaxies, instead being consistent with the existence of a ubiquitous and very rapid mechanism for the growth of dust in the interstellar medium. We use the {tau}{sub B}{sup f} - {mu}{sub *} relation in conjunction with the radiation transfer model for spiral galaxies of Popescu and Tuffs to derive intrinsic scaling relations between specific star formation rate (SFR), stellar mass, and stellar surface density, in which attenuation of the UV light used for the measurement of SFR is corrected on an object-to-object basis. A marked reduction in scatter in these relations is achieved which we demonstrate is due to correction of both the inclination-dependent and face-on components of attenuation. Our results are consistent with a general picture of spiral galaxies in which most of the submm emission originates from grains residing in translucent structures, exposed to UV in the diffuse interstellar radiation field.

79 ASTRONOMY AND ASTROPHYSICS↗

Mechanisms for the inversion of chirality: Global reaction route mapping of stereochemical pathways in a probable chiral extraterrestrial molecule, 2-aminopropionitrile

2-Aminopropionitrile (APN), a probable candidate as a chiral astrophysical molecule, is a precursor to amino-acid alanine. Stereochemical pathways in 2-APN are explored using Global Reaction Route Mapping (GRRM) method employing high-level quantum-mechanical computations. Besides predicting the conventional mechanism for chiral inversion that proceeds through an achiral intermediate, a counterintuitive flipping mechanism is revealed for 2-APN through chiral intermediates explored using the GRRM. The feasibility of the proposed stereochemical pathways, in terms of the Gibbs free-energy change, is analyzed at the temperature conditions akin to the interstellar medium. Notably, the stereoinversion in 2-APN is observed to be more feasible than the dissociation of 2-APN and intermediates involved along the stereochemical pathways, and the flipping barrier is observed to be as low as 3.68 kJ/mol along one of the pathways. The pathways proposed for the inversion of chirality in 2-APN may provide significant insight into the extraterrestrial origin of life.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In-Situ and Ex-Situ Studies on the Morphology Changes of Polymer Pipeline Materials for Use in Hydrogen Gas Environments

The US natural gas infrastructure is a national asset that could be used to deliver hydrogen and hydrogen blends of natural gas as a pathway to reduce carbon emissions. The distribution system comprises nearly 50% plastic pipe composed of medium- and high-density polyethylene materials (MDPE and HDPE). While these materials perform adequately for natural gas, research on their hydrogen compatibility is essential to understand if any immediate and long-term risks are associated with hydrogen addition. The Blended Gas CRADA, a HyBlend project, has established a comprehensive test method for evaluating MDPE and HDPE of various plastic resin compositions of pipeline material in pure hydrogen and 20% hydrogen/80% methane blends. Both in-situ and ex-situ measurements were performed to capture hydrogen-induced changes in the polyethylene material's crystalline, amorphous and their interphase regions. We investigated MDPE and HDPE pipeline materials made from different polymer resin systems to evaluate the effects of hydrogen gas. The materials were characterized by their density, diffusion coefficient, free volume ratio, and degree of crystallinity. Various advanced characterization methods, including in situ NMR, ex situ XRD, ex situ DSC, and ex situ TDA, were used to analyze the effects of changes in crystalline, amorphous, and interphase regions due to gas exposure. Time-dependent post-decompression quasi-static tensile tests were conducted to explore the effects of gas exposure time on the mechanical behavior of the pipe materials. This work will highlight the time sensitivities during and after gas exposure. The correlation between gas-induced polyethylene morphology changes and the associated material performance will be addressed for the intended applications. These studies will show that polyethylene resin composition and material exposure are important factors when considering whether hydrogen gas affects pipeline materials positively or negatively.

Simmons, Kevin L.↗

Dislocation-Related Photoluminescence in Silicon Implanted with Germanium Ions

The influence exerted by the conditions of the post-implantation annealing of silicon implanted with germanium ions on how luminescence centers are formed is studied. Measurements by the technique of the Rutherford backscattering of medium- and high-energy ions demonstrates that implantation with 1-MeV germanium ions at a dose of 1.5 × 10{sup 14} cm{sup –2} does not lead to the amorphization of single-crystal silicon. It is found that subsequent high-temperature annealing of the implanted samples in a chlorine-containing atmosphere at a temperature of 1100°C for 0.5–1.5 h gives rise to so-called D1 and D2 dislocation-related luminescence lines with wavelengths of 1.54 and 1.42 μm. With increasing annealing duration, the intensity of the D1 line decreases and that of D2 remains constant, but the D1 line dominates in all the spectra. The possible factors responsible for a decrease in the intensity of the D1 line and, in particular, the diffusion of germanium atoms and the formation of a silicon–germanium solid solution are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Impedance Characteristics and Polarization Behavior of a Microbial Fuel Cell in Response to Short-Term Changes in Medium pH

pH oppositely influences anode and cathode performance in microbial fuel cells. The differential electrochemical effects at each electrode and the resultant full-cell performance were analyzed in medium pH from 6.0 to 8.0. Potentials changed -60 mV/pH for the anode and -68 mV/pH for the cathode, coincident with thermodynamic estimations. Open circuit voltage reached a maximum (741 mV) at pH 7, and maximum power density was highest (712 mW/m{sup 2}) at pH 6.5 as the cathode performance improved at lower pH. Maximum current density increased and apparent half-saturation potential (E{sub KA}) decreased with increasing medium pH due to improved anode performance. An equivalent circuit model composed of two time constant processes accurately fit bioanode impedance data. One of these processes was consistently the rate-limiting step for acetate-oxidizing exoelectrogenesis, with its pH-varying charge transfer resistance R{sub 2} ranging from 2- to 321-fold higher than the pH-independent charge transfer resistance R{sub 1}. The associated capacitance C{sub 2} was 2-3 orders of magnitude larger than C{sub 1}. R{sub 2} was lowest near E{sub KA} and increased by several orders of magnitude at anode potentials above E{sub KA}, while R{sub 1} was nearly stable. However, fits deviated slightly at potentials above E{sub KA} due to emerging impedance possibly associated with diffusion and excessive potential.

30 DIRECT ENERGY CONVERSION↗

CONSTRAINING THE ENVIRONMENT OF CH{sup +} FORMATION WITH CH{sup +}{sub 3} OBSERVATIONS

The formation of CH{sup +} in the interstellar medium (ISM) has long been an outstanding problem in chemical models. In order to probe the physical conditions of the ISM in which CH{sup +} forms, we propose the use of CH{sup +}{sub 3} observations. The pathway to forming CH{sup +}{sub 3} begins with CH{sup +}, and a steady-state analysis of CH{sup +}{sub 3} and the reaction intermediary CH{sup +}{sub 2} results in a relationship between the CH{sup +} and CH{sup +}{sub 3} abundances. This relationship depends on the molecular hydrogen fraction, f{sub H{sub 2}}, and gas temperature, T, so observations of CH{sup +} and CH{sup +}{sub 3} can be used to infer the properties of the gas in which both species reside. We present observations of both molecules along the diffuse cloud sight line toward Cyg OB2 No. 12. Using our computed column densities and upper limits, we put constraints on the f{sub H{sub 2}} versus T parameter space in which CH{sup +} and CH{sup +}{sub 3} form. We find that average, static, diffuse molecular cloud conditions (i.e., f{sub H{sub 2}}{approx}>0.2, T {approx} 60 K) are excluded by our analysis. However, current theory suggests that non-equilibrium effects drive the reaction C{sup +} + H{sub 2} -> CH{sup +} + H, endothermic by 4640 K. If we consider a higher effective temperature due to collisions between neutrals and accelerated ions, the CH{sup +}{sub 3} partition function predicts that the overall population will be spread out into several excited rotational levels. As a result, observations of more CH{sup +}{sub 3} transitions with higher signal-to-noise ratios are necessary to place any constraints on models where magnetic acceleration of ions drives the formation of CH{sup +}.

79 ASTRONOMY AND ASTROPHYSICS↗

New constraints on warm dark matter from the Lyman- α forest power spectrum

The forest of Lyman-α absorption lines detected in the spectra of distant quasars encodes information on the nature and properties of dark matter and the thermodynamics of diffuse baryonic material. Its main observable—the 1D flux power spectrum (FPS)—should exhibit a suppression on small scales and an enhancement on large scales in warm dark matter (WDM) cosmologies compared to standard Λ⁢CDM. Here, we present an unprecedented suite of 1080 high-resolution cosmological hydrodynamical simulations run with the graphics processing unit-accelerated code cholla to study the evolution of the Lyman-α forest under a wide range of physically motivated gas thermal histories along with different free-streaming lengths of WDM thermal relics in the early Universe. A statistical comparison of synthetic data with the forest FPS measured down to the smallest velocity scales ever probed at redshifts 4.0≲z≲5.2 [E. Boera et al., Revealing reionization with the thermal history of the intergalactic medium: New constraints from the Ly⁢α flux power spectrum, Astrophys. J. 872, 101 (2019)] yields a lower-limit m WDM >3.1 keV (95% C.L.) for the WDM particle mass and constrains the amplitude and spectrum of the photoheating and photoionizing background produced by star-forming galaxies and active galactic nuclei at these redshifts. Interestingly, our Bayesian inference analysis appears to weakly favor WDM models with a peak likelihood value at the thermal relic mass of m WDM =4.5 keV. In conclusion, we find that the suppression of the FPS from free-streaming saturates at k≳0.1 s km -1 because of peculiar velocity smearing, and this saturated suppression combined with a slightly lower gas temperature provides a moderately better fit to the observed small-scale FPS for WDM cosmologies.

79 ASTRONOMY AND ASTROPHYSICS↗

Fringe biasing: A variance reduction technique for optically thick meshes

Fringe biasing is a stratified sampling scheme applicable to Monte Carlo thermal radiation transport codes. The thermal emission source in optically thick cells is partitioned into separate contributions from the cell interiors (where the likelihood of the particles escaping the cells is virtually zero) and the 'fringe' regions close to the cell boundaries. Thermal emission in the cell interiors can now be modelled with fewer particles, the remaining particles being concentrated in the fringes so that they are more likely to contribute to the energy exchange between cells. Unlike other techniques for improving the efficiency in optically thick regions (such as random walk and discrete diffusion treatments), fringe biasing has the benefit of simplicity, as the associated changes are restricted to the sourcing routines with the particle tracking routines being unaffected. This paper presents an analysis of the potential for variance reduction achieved from employing the fringe biasing technique. The aim of this analysis is to guide the implementation of this technique in Monte Carlo thermal radiation codes, specifically in order to aid the choice of the fringe width and the proportion of particles allocated to the fringe (which are interrelated) in multi-dimensional simulations, and to confirm that the significant levels of variance reduction achieved in simulations can be understood by studying the behaviour for simple test cases. The variance reduction properties are studied for a single cell in a slab geometry purely absorbing medium, investigating the accuracy of the scalar flux and current tallies on one of the interfaces with the surrounding medium. (authors)

97 MATHEMATICS AND COMPUTING↗

Role of Quasi-Longitudinal and Quasi-Transverse Phonons in the Drag Thermopower of Potassium Crystals at Low Temperatures

We have analyzed the effect of elastic energy anisotropy on the electron–phonon drag and thermoelectric phenomena in potassium crystals. It is shown that focusing leads to drag thermopower anisotropy at low temperatures; when diffuse phonon scattering at the boundaries is the predominant relaxation mechanism, focusing leads to drag thermopower anisotropy. With increasing sample cross section, the competition of the boundary and bulk phonon relaxation mechanisms leads to a nonmonotonic variation of drag thermopower anisotropy: upon a transition from the Knudsen regime of the phonon gas flow, it first increases from 16% to 30%, and then vanishes upon a transition to bulk samples. We have studied the role of quasi-longitudinal and quasi-transverse phonons in the drag thermopower of potassium crystals at low temperatures. It is shown that the contribution of slow quasi-transverse phonons to the drag thermopower of bulk potassium crystals is an order of magnitude larger than the contribution of quasi-longitudinal phonons. For this reason, the isotropic medium model cannot provide a correct description of the electron–phonon drag in metals. The effect of inelastic energy anisotropy on the spectrum and of the phonon polarization vector must be taken into account.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

GROWTH OF A LOCALIZED SEED MAGNETIC FIELD IN A TURBULENT MEDIUM

Turbulence dynamo deals with the amplification of a seed magnetic field in a turbulent medium and has been studied mostly for uniform or spatially homogeneous seed magnetic fields. However, some astrophysical processes (e.g., jets from active galaxies, galactic winds, or ram-pressure stripping in galaxy clusters) can provide localized seed magnetic fields. In this paper, we numerically study amplification of localized seed magnetic fields in a turbulent medium. Throughout the paper, we assume that the driving scale of turbulence is comparable to the size of the system. Our findings are as follows. First, turbulence can amplify a localized seed magnetic field very efficiently. The growth rate of magnetic energy density is as high as that for a uniform seed magnetic field. This result implies that magnetic field ejected from an astrophysical object can be a viable source of a magnetic field in a cluster. Second, the localized seed magnetic field disperses and fills the whole system very fast. If turbulence in a system (e.g., a galaxy cluster or a filament) is driven at large scales, we expect that it takes a few large-eddy turnover times for the magnetic field to fill the whole system. Third, growth and turbulence diffusion of a localized seed magnetic field are also fast in high magnetic Prandtl number turbulence. Fourth, even in decaying turbulence, a localized seed magnetic field can ultimately fill the whole system. Although the dispersal rate of the magnetic field is not fast in purely decaying turbulence, it can be enhanced by an additional forcing.

79 ASTRONOMY AND ASTROPHYSICS↗