Search NASA⌕ Search

SEARCH · Search NASA

Results for “dislocation density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Influence of Torsion on Precipitation and Hardening Effects during Aging of an Extruded AZ91 Alloy

The effect of torsional deformation by various routes prior to artificial aging treatment on the microstructure of extruded AZ91 rods was investigated. The tension and compression properties along the extruded direction were tested to evaluate the hardening effect. The results showed that torsional deformation can largely enhance the subsequent age-hardening effect. A detailed microstructural characterization revealed that torsional deformation produced a high density of dislocations and {10-12} twins, which can promote continuous precipitation and increase the number density of the Mg{sub 17}Al{sub 12} phase. In addition, part of dislocations and the {10-12} twins were retained after aging treatment. The combination of the increased precipitation hardening by Mg{sub 17}Al{sub 12}, dislocation strengthening and refinement strengthening contributed to the high hardening effect. Moreover, the hardening effect can be further increased by tailoring the torsion route. The torsion route exhibited little influence on the age-hardening effect, while it remarkably affected the texture of the twisted AZ91 rods. Reciprocating torsion had little influence on the texture. In contrast, unidirectional torsion caused the c-axis of the texture to rotate toward the extrusion direction, resulting in a texture softening effect. Therefore, combining reciprocating torsion and aging caused a higher hardening effect than combining unidirectional torsion and aging. The detailed strengthening mechanism was analyzed and is discussed.

36 MATERIALS SCIENCE↗

Through-thickness recrystallization characteristics of a laminated AA3xxx–AA6xxx aluminum alloy system

The through-thickness annealing behavior of a laminated AA3xxx–AA6xxx alloy system at 300 °C has been studied by scanning electron microscopy, electron backscatter diffraction analysis, electron probe micro-analysis, differential scanning calorimetry, and hardness measurement. Results show that the recrystallization process starts at the interface region between the AA3xxx (clad) and AA6xxx (core) layers. Subsequently, the recrystallization process front progresses into the core layer, while the clad layer is the last region to recrystallize. It is also found that precipitation precedes recrystallization in the entire laminate at the investigated temperature. The preferential onset of recrystallization at the interface region is attributed to the net driving pressure being the highest in this region. The factors that lead to such enhanced net driving pressure are (a) deformation incompatibility between the two alloy layers, (b) lower solute content of the interface, which also leads to lower volume fraction of precipitates, and (c) an accelerated rate of precipitate coarsening due to the presence of a higher density of dislocations. The gradual progress of recrystallization from the interface towards the core layer is dictated by precipitate coarsening and the dependence of its rate on the density of deformation-induced dislocations. The lower driving pressure due to lower work hardening capacity, high solute drag pressure due to Mn, and additional Zener drag from precipitates that form due to solute redistribution during annealing explain the late initiation of recrystallization in the clad layer. - Highlights: • The through-thickness recrystallization of a laminated system is investigated. • The early onset of recrystallization at the interface is discussed. • The effects of precipitation and coarsening on recrystallization are analyzed.

36 MATERIALS SCIENCE↗

Vibrational density of states measurement of hydrogen trapped at dislocations in deformed PdH{sub 0.0008}

The vibrational density of states (DOS) of hydrogen trapped at dislocations in deformed PdH{sub 0.0008} has been measured at 4 and 295 K with incoherent inelastic neutron scattering. The vibrational DOS at 4 K exhibits features characteristic of the low-temperature {beta}-Pd hydride phase while the characteristic peak in the 295 K DOS corresponds to the solid-solution {alpha}-Pd phase. This is evidence of a {alpha}{yields}{beta} transition at low temperature within the distorted environment of dislocations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dose dependent electrical and structural properties of BiFeO{sub 3} nanoparticles under electron irradiation

The paper deals with the effect of electron irradiation on the structural and electrical properties of BiFeO{sub 3} nanoparticles synthesized by standard sol-gel method. The samples were subjected to electron irradiation using a Microtron accelerator. The effects of irradiation on structural morphology viz grain size, microstrain and dislocation have been studied by X-ray diffraction (XRD). The current density of the samples at various doses of high energy electrons was also studied. It was observed that electrical conductivity depends on electron dose.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dynamical Scaling Reveals Topological Defects and Anomalous Evolution of a Photoinduced Phase Transition

Nonequilibrium states of quantum materials can exhibit exotic properties and enable unprecedented functionality and applications. These transient states are inherently inhomogeneous, characterized by the formation of topologically protected structures, requiring nanometer spatial resolution on femtosecond timescales to resolve their evolution. Using ultrafast total x-ray scattering at a free electron laser and a sophisticated scaling analysis, we gain unique access to the dynamics on the relevant mesoscopic length scales. Our results provide direct evidence that ultrafast excitation of LaTe 3 leads to formation of topological vortex strings of the charge density wave. These dislocations of the charge density wave exhibit anomalous, subdiffusive dynamics, slowing the equilibration process, providing rare insight into the nonequilibrium mesoscopic response in a quantum material. Our findings establish a general framework to investigate properties of topological defects, which are expected to be ubiquitous in nonequilibrium phase transitions and may arrest equilibration and enhance competing orders.

Orenstein, Gal [SLAC National Accelerator Laborato↗

Growth mechanisms, polytypism, and real structure of kaolinite microcrystals

The mechanisms of growth of kaolinite microcrystals (0.1-5.0 {mu}m in size) at deposits related to the cluvial weathering crust, as well as to the low-temperature and medium-temperature hydrothermal processes of transformations of minerals in different rocks in Russia, Kazakhstan, Ukraine, Czechia, Vietnam, India, Cuba, and Madagascar, are investigated using transmission electron microscopy and vacuum decoration with gold. It is established that kaolinite microcrystals grow according to two mechanisms: the mechanism of periodic formation of two-dimensional nuclei and the mechanism of spiral growth. The spiral growth of kaolinite microcrystals is dominant and occurs on steps of screw dislocations that differ in sign and magnitude of the Burgers vector along the c axis. The layered growth of kaolinite originates from a widespread source in the form of a step between polar (+ and -) dislocations, i.e., a growth analogue of the Frank-Read dislocation source. The density of growth screw dislocations varies over a wide range and can be as high as {approx}10{sup 9} cm{sup -2}. Layered stepped kaolinite growth pyramids for all mechanisms of growth on the (001) face of kaolinite exhibit the main features of the triclinic 1Tc and real structures of this mineral.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dynamical Scaling Reveals Topological Defects and Anomalous Evolution of a Photoinduced Phase Transition

Nonequilibrium states of quantum materials can exhibit exotic properties and enable unprecedented functionality and applications. These transient states are inherently inhomogeneous, characterized by the formation of topologically protected structures, requiring nanometer spatial resolution on femtosecond timescales to resolve their evolution. Using ultrafast total x-ray scattering at a free electron laser and a sophisticated scaling analysis, we gain unique access to the dynamics on the relevant mesoscopic lengthscales. Our results provide direct evidence that ultrafast excitation of LaTe$_3$ leads to formation of topological vortex strings of the charge density wave. These dislocations of the charge density wave exhibit anomalous, subdiffusive dynamics, slowing the equilibration process, providing rare insight into the nonequilibrium mesoscopic response in a quantum material. Our findings establish a general framework to investigate properties of topological defects, which are expected to be ubiquitous in nonequilibrium phase transitions and may arrest equilibration and enhance competing orders.

FOS: Physical sciences↗

Influence of dislocations on indium diffusion in semi-polar InGaN/GaN heterostructures

The spatial distribution of indium composition in InGaN/GaN heterostructure is a critical topic for modulating the wavelength of light emitting diodes. In this letter, semi-polar InGaN/GaN heterostructure stripes were fabricated on patterned GaN/Sapphire substrates by epitaxial lateral overgrowth (ELO), and the spatial distribution of indium composition in the InGaN layer was characterized by using cathodoluminescence. It is found that the indium composition is mainly controlled by the diffusion behaviors of metal atoms (In and Ga) on the surface. The diffusivity of metal atoms decreases sharply as migrating to the region with a high density of dislocations and other defects, which influences the distribution of indium composition evidently. Our work is beneficial for the understanding of ELO process and the further development of InGaN/GaN heterostructure based devices.

36 MATERIALS SCIENCE↗

Investigation of the GaN-on-GaAs interface for vertical power device applications

GaN layers were grown onto (111) GaAs by molecular beam epitaxy. Minimal band offset between the conduction bands for GaN and GaAs materials has been suggested in the literature raising the possibility of using GaN-on-GaAs for vertical power device applications. I-V and C-V measurements of the GaN/GaAs heterostructures however yielded a rectifying junction, even when both sides of the junction were heavily doped with an n-type dopant. Transmission electron microscopy analysis further confirmed the challenge in creating a GaN/GaAs Ohmic interface by showing a large density of dislocations in the GaN layer and suggesting roughening of the GaN/GaAs interface due to etching of the GaAs by the nitrogen plasma, diffusion of nitrogen or melting of Ga into the GaAs substrate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In Situ Micro-Pillar Compression to Examine Radiation-Induced Hardening Mechanisms of FeCrAl Alloys

Here, the effects of 5 MeV Fe 2+ ion irradiation at 300°C on the microstructure evolution and deformation behavior of a FeCrAl C26M alloy are presented. It has been found that dislocation loop density increases an order of magnitude from 1 dpa to 16 dpa irradiations, whereas, the dislocation loop size saturates with increasing damage. Micropillars, 600 nm in diameter and 1.3 µm in height, were fabricated and compressed inside grains with <001>, <011> and <111> crystallographic orientations, respectively. {112} <111> has been identified as the primary slip system in both unirradiated and irradiated alloy. The increase in yield stress after irradiation is observed with measurable variation along <001> and <011> vs. along <111>. By applying the Orowan dispersed barrier model, the increase of yield stress is found mainly due to the slip resistance of radiation generated defect loops. Detailed transmission electron microscopy (TEM) studies were performed to quantify the Burgers vector and the distribution of irradiation induced dislocations at elevated strains. It is revealed that localized shear instability is caused by avalanche slip events of ½<111> dislocations gliding out of tested pillars. Simultaneously, a large number of sessile/immobile <100> dislocations formed in the vicinity of slip band, leading to the hardening at elevated strains.

36 MATERIALS SCIENCE↗

Dislocation arrangements within slip bands during fatigue cracking

Highlights: • Dislocation cells form near early slip bands fatigue cracks in wavy-slip materials. • Lattice rotates severely and grain boundaries form between neighboring cells. • The walls of dislocation cells are preferential sites for fatigue cracking. - Abstract: Microstructures and dislocations associated with the slip band (SB) fatigue cracks were investigated in Cu single crystal and bicrystal. It is found that there are high strain localizations with abundant dislocation cells around the cracked SBs. Due to the high local strain and slip irreversibility, the lattice rotates severely leading to large misorientation and hence low- or high- angle grain boundaries could form between the neighboring cells. Moreover, the dislocation walls can serve as preferential sites for nucleation and propagation of fatigue cracks with high density of dislocations, vacancies and high strain incompatibility.

36 MATERIALS SCIENCE↗

Multiple-stripe lithiation mechanism of individual SnO2 nanowires in a flooding geometry

The atomic scale lithiation mechanism of individual SnO2 nanowires in a flooding geometry with the entire wires being immersed in the electrolyte was revealed by in-situ transmission electron microscopy. The lithiation initiated multiple stripes with width of a few nanometer parallel to {020} planes transversing the entire wires, serving as multiple reaction fronts for late stage of lithiation. Inside the stripes, we identified high density of dislocations and enlarged inter-planar spacing, which provide effective path for lithium ion transport. The density of the stripes increased with further lithiation, and eventually they merged with one another, causing a large enlongation and volume expansion and the crystalline to amorphous phase transformation. This multiple stripes and multiple reaction fronts lithiation mechanism is unexpected and differs completely from the expected core-shell lithiation mechanism.

flooding↗

GaN thermal transport limited by the interplay of dislocations and size effects

Measurements and first-principles calculations probe the temperature-dependent thermal conductivity (k) of GaN films with large densities of highly oriented dislocations. We demonstrate that phonon-dislocation scattering is weaker than suggested by previous measurements, likely due to sample and experiment size effects. Nonetheless, dislocation-limited k is observed in samples with large dislocation densities and at lower temperatures where k anisotropy is also observed. Combination of experiment and theory give insights into the interplay of thermal resistance mechanisms limiting GaN functionalities and suggest pathways for tuning k via defect engineering.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dynamics of threading dislocations in porous heteroepitaxial GaN films

Behavior of threading dislocations in porous heteroepitaxial gallium nitride (GaN) films has been studied using computer simulation by the two-dimensional discrete dislocation dynamics approach. A computational scheme, where pores are modeled as cross sections of cylindrical cavities, elastically interacting with unidirectional parallel edge dislocations, which imitate threading dislocations, is used. Time dependences of coordinates and velocities of each dislocation from dislocation ensembles under investigation are obtained. Visualization of current structure of dislocation ensemble is performed in the form of a location map of dislocations at any time. It has been shown that the density of appearing dislocation structures significantly depends on the ratio of area of a pore cross section to area of the simulation region. In particular, increasing the portion of pores surface on the layer surface up to 2% should lead to about a 1.5-times decrease of the final density of threading dislocations, and increase of this portion up to 15% should lead to approximately a 4.5-times decrease of it.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Response of solidification cellular structures in additively manufactured 316 stainless steel to heavy ion irradiation: an in situ study

In-core or cladding structural materials exposed to heavy ion irradiation often suffer serious irradiation-induced damages. Introducing defect sinks can effectively mitigate irradiation-induced degradation in materials. Here, we investigated the radiation response of additively manufactured 316 austenitic stainless steel with high-density solidification cellular structures via in situ Kr ++ irradiation at 400°C to 5dpa. The study shows that the trapped dislocations along with the cellular walls can serve as effective defect sinks, thus reduce dislocation loop density compared with the conventional coarse-grained counterparts. This study provides a positive step for the potential applications of radiation-resistant, additively manufactured steels in advanced nuclear reactors.

36 MATERIALS SCIENCE↗

Extensive 3D mapping of dislocation structures in bulk aluminum

Abstract Thermomechanical processing such as annealing is one of the main methods to tailor the mechanical properties of materials, however, much is unknown about the reorganization of dislocation structures deep inside macroscopic crystals that give rise to those changes. Here, we demonstrate the self-organization of dislocation structures upon high-temperature annealing in a mm-sized single crystal of aluminum. We map a large embedded 3D volume ( $$100\times 300\times 300$$ 100 × 300 × 300 $$\upmu$$ μ m $$^3$$ 3 ) of dislocation structures using dark field X-ray microscopy (DFXM), a diffraction-based imaging technique. Over the wide field of view, DFXM’s high angular resolution allows us to identify subgrains, separated by dislocation boundaries, which we identify and characterize down to the single-dislocation level using computer-vision methods. We demonstrate how even after long annealing times at high temperatures, the remaining low density of dislocations still pack into well-defined, straight dislocation boundaries (DBs) that lie on specific crystallographic planes. In contrast to conventional grain growth models, our results show that the dihedral angles at the triple junctions are not the predicted 120 $$^{\circ }$$ ∘ , suggesting additional complexities in the boundary stabilization mechanisms. Mapping the local misorientation and lattice strain around these boundaries shows that the observed strain is shear, imparting an average misorientation around the DB of $$\approx$$ ≈ 0.003 to 0.006 $$^{\circ }$$ ∘ .

36 MATERIALS SCIENCE↗

Photoluminescence of silicon after deposition of polycrystalline diamond films

Low-temperature (5K) photoluminescence of silicon substrates in the range 0.8-1.2 eV is studied before and after deposition of polycrystalline diamond films. The diamond films were deposited in the microwave plasma onto high-purity dislocation-free silicon (with the resitivity {rho} {approx} 3 k{Omega} cm) subjected to mechanical polishing or more delicate chemical and mechanical polishing. The deposition temperature was 750-850 deg. C. In the photoluminescence spectra of the samples with the substrates polished chemically and mechanically, two lines, D{sub 1} and D{sub 2}, corresponding to the dislocation-related emission are recorded. Generation of dislocations in the substrates is caused by efficient adhesion of the diamond film and, as a result, by internal stresses that relax with the formation of dislocations. The experimental spectra are practically identical to the photoluminescence spectra observed in silicon ({rho} {approx} 100 {Omega} cm) with the density of dislocations {approx}10{sup 4} cm{sup -2}.

36 MATERIALS SCIENCE↗