Search NASA⌕ Search

SEARCH · Search NASA

Results for “doping effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Orbitally selective resonant photodoping to enhance superconductivity

Signatures of superconductivity at elevated temperatures above T c in high-temperature superconductors have been observed near 1/8 hole doping for photoexcitation with infrared or optical light polarized either in the CuO 2 plane or along the c axis. While the use of in-plane polarization has been effective for incident energies aligned to specific phonons, c-axis laser excitation in a broad range between 5 μm and 400 nm was found to affect the superconducting dynamics in striped La 1.88 5Ba 0.115 CuO 4 , with a maximum enhancement in the 1/ω dependence to the conductivity observed at 800 nm. This broad energy range, specifically 800 nm, is not resonant with any phonon modes, yet induced electronic excitations appear to be connected to superconductivity at energy scales well above the typical gap energies in the cuprates. A critical question is, What can be responsible for such an effect at 800 nm? Using time-dependent exact diagonalization, we demonstrate that the holes in the CuO 2 plane can be photoexcited into the charge reservoir layers at resonant wavelengths within a multiband Hubbard model. This orbitally selective photoinduced charge transfer effectively changes the in-plane doping level, which can lead to an enhancement of T c near the 1/8 anomaly.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Higher-order topological and nodal superconducting transition-metal sulfides M S ( M = Nb and Ta )

Intrinsic topological superconducting materials are exotic and vital to develop the next-generation topological superconducting devices, topological quantum calculations, and quantum information technologies. Here, we predict the topological and nodal superconductivity of NiAs-type M ⁢S ( M = Nb and Ta) transition-metal sulfides. We reveal their higher-order topology nature with an index of Z 4 = 2. These materials have a higher T c than the Nb or Ta metal superconductors due to their flat band and strong electron-phonon coupling nature. Electron doping and lighter isotopes can effectively enhance the T c . In conclusion, our findings show that the M ⁢S ( M = Nb and Ta) systems can be platforms to study exotic physics in the higher-order topological superconductors, and provide a theoretical support to utilize them as the topological superconducting devices in the field of advanced topological quantum calculations and information technologies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Evidence of Reversible Oxidation at CuInSe2 Grain Boundaries

Effects related to alkali metal doping and grain boundaries have puzzled the chalcopyrite photovoltaics community for a long time. This study is the first to report reversible oxidation of grain boundaries in CuInSe2 thin films. The phenomenon is observed in sodium-doped films, but not in undoped ones. Cathodoluminescence imaging, secondary ion mass spectrometry and Kelvin probe force microscopy analyses are performed on CuInSe2 thin films before and after exposure to vacuum. The findings suggest the existence of yet unidentified solid-gas equilibria. Resolving the nature of such reactions will provide new insights into the mechanism of alkali metal doping and passivation in chalcopyrite solar cells.

14 SOLAR ENERGY↗
DOE OSTI2025

Room-temperature high-purity single-photon emission from carbon-doped boron nitride thin films

Hexagonal boron nitride (h-BN) has emerged as a promising platform for generating room temperature single photons exhibiting high brightness and spin-photon entanglement. However, improving emitter purity, stability, and scalability remains a challenge for quantum technologies. Here, we demonstrate highly pure and stable single-photon emitters (SPEs) in h-BN by directly growing carbon-doped, centimeter-scale h-BN thin films using the pulsed laser deposition (PLD) method. These SPEs exhibit room temperature operation with polarized emission, achieving a g (2) (0) value of 0.015, which is among the lowest reported for room temperature SPEs and the lowest achieved for h-BN SPEs. It also exhibits high brightness (~0.5 million counts per second), remarkable stability during continuous operation (>15 min), and a Debye-Waller factor of 45%. First-principles calculations reveal unique carbon defects responsible for these properties, enabled by PLD’s low-temperature synthesis and in situ doping. Our results demonstrate an effective method for large-scale production of high-purity, stable SPEs in h-BN, enabling robust quantum optical sources for various quantum applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Auger spectroscopy beyond the ultra-short core-hole relaxation time approximation

Abstract We present a time-dependent computational approach to study Auger electron spectroscopy (AES) beyond the ultra-short core-hole relaxation time approximation and, as a test case, we apply it to the paradigmatic example of a one-dimensional Mott insulator represented by a half-filled Hubbard chain. The Auger spectrum is usually calculated by assuming that, after the creation of a core-hole, the system thermalizes almost instantaneously. This leads to a relatively simple analytical expression that uses the ground-state with a core-hole as a reference state and ignores all the transient dynamics related to the screening of the core-hole. In this picture, the response of the system can be associated to the pair spectral function. On the other hand, in our numerical calculations, the core hole is created by a light pulse, allowing one to study the transient dynamics of the system in terms of the pulse duration and in the non-perturbative regime. Time-dependent density matrix renormalization group calculations reveal that the relaxation process involves the creation of a polarization cloud of doublon excitations that have an effect similar to photo-doping. As a consequence, there is a leak of spectral weight to higher energies into what otherwise would be the Mott gap. For longer pulses, these excited states, mostly comprised of doublons, can dominate the spectrum. By changing the duration of the light-pulse, the entire screening process can be resolved in time.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Controlling the orbital Hall effect in gapped bilayer graphene in the terahertz regime

We study the orbital Hall effect (OHE) in the AC regime using bilayer graphene (BLG) as a prototypical material platform. While the unbiased BLG has gapless electronic spectra, applying a perpendicular electric field creates an energy band gap that can be continuously tuned from zero to high values. By exploiting this flexibility, we demonstrate the ability to control the behavior of AC orbital Hall conductivity. Particularly, we demonstrate that the orbital Hall conductivity at the neutrality point changes its signal at a critical frequency, the value of which is proportional to the perpendicular electric field. For BLG with narrow band gaps, the active frequency region for the AC OHE may extend to a few terahertz, which is experimentally accessible with current technologies. We also consider the introduction of a perpendicular magnetic field in the weak-coupling regime using first-order perturbation theory to illustrate how the breaking of time-reversal symmetry enables the emergence of the AC charge Hall effect in the charge-doped situation and modifies the AC orbital Hall conductivity. Our calculations suggest that BLG with narrow band gaps is a practical candidate for investigating time-dependent orbital angular momentum transport.

36 MATERIALS SCIENCE↗
NASA NTRS1985

High purith low defect FZ silicon

The most common intrinsic defects in dislocation-free float zone (FZ) silicon crystals are the A- and B-type swirl defects. The mechanisms of their formation and annihilation have been extensively studied. Another type of defect in dislocation-free FZ crystals is referred to as a D-type defect. Concentrations of these defects can be minimized by optimizing the growth conditions, and the residual swirls can be reduced by the post-growth extrinsic gettering process. Czochralski (Cz) silicon wafers are known to exhibit higher resistance to slip and warpage due to thermal stress than do FZ wafers. The Cz crystals containing dislocations are more resistant to dislocation movement than dislocated FZ crystals because of the locking of dislocations by oxygen atoms present in the Cz crystals. Recently a transverse magnetic field was applied during the FZ growth of extrinsic silicon. Resultant flow patterns, as revealed by striation etching and spreading resistance in Ga-doped silicon crystals, indicate strong effects of the transverse magnetic field on the circulation within the melt. At fields of 5500 gauss, the fluid flow in the melt volume is so altered as to affect the morphology of the growing crystal.

Kimura, H.↗
NASA NTRS1991

High-gain AlGaAs/GaAs double heterojunction Darlington phototransistors for optical neural networks

High-gain MOCVD-grown (metal-organic chemical vapor deposition) AlGaAs/GaAs/AlGaAs n-p-n double heterojunction bipolar transistors (DHBTs) and Darlington phototransistor pairs are provided for use in optical neural networks and other optoelectronic integrated circuit applications. The reduced base doping level used results in effective blockage of Zn out-diffusion, enabling a current gain of 500, higher than most previously reported values for Zn-diffused-base DHBTs. Darlington phototransitor pairs of this material can achieve a current gain of over 6000, which satisfies the gain requirement for optical neural network designs, which advantageously may employ neurons comprising the Darlington phototransistor pairs in series with a light source.

Kim, Jae H.↗
NASA NTRS2004

Chirped-Superlattice, Blocked-Intersubband QWIP

An Al(x)Ga(1-x)As/GaAs quantum-well infrared photodetector (QWIP) of the blocked-intersubband-detector (BID) type, now undergoing development, features a chirped (that is, aperiodic) superlattice. The purpose of the chirped superlattice is to increase the quantum efficiency of the device. A somewhat lengthy background discussion is necessary to give meaning to a brief description of the present developmental QWIP. A BID QWIP was described in "MQW Based Block Intersubband Detector for Low-Background Operation" (NPO-21073), NASA Tech Briefs Vol. 25, No. 7 (July 2001), page 46. To recapitulate: The BID design was conceived in response to the deleterious effects of operation of a QWIP at low temperature under low background radiation. These effects can be summarized as a buildup of space charge and an associated high impedance and diminution of responsivity with increasing modulation frequency. The BID design, which reduces these deleterious effects, calls for a heavily doped multiple-quantum-well (MQW) emitter section with barriers that are thinner than in prior MQW devices. The thinning of the barriers results in a large overlap of sublevel wave functions, thereby creating a miniband. Because of sequential resonant quantum-mechanical tunneling of electrons from the negative ohmic contact to and between wells, any space charge is quickly neutralized. At the same time, what would otherwise be a large component of dark current attributable to tunneling current through the whole device is suppressed by placing a relatively thick, undoped, impurity-free AlxGa1 x As blocking barrier layer between the MQW emitter section and the positive ohmic contact. [This layer is similar to the thick, undoped Al(x)Ga(1-x)As layers used in photodetectors of the blocked-impurity-band (BIB) type.] Notwithstanding the aforementioned advantage afforded by the BID design, the responsivity of a BID QWIP is very low because of low collection efficiency, which, in turn, is a result of low electrostatic- potential drop across the superlattice emitter. Because the emitter must be electrically conductive to prevent the buildup of space charge in depleted quantum wells, most of the externally applied bias voltage drop occurs across the blocking-barrier layer. This completes the background discussion. In the developmental QWIP, the periodic superlattice of the prior BID design is to be replaced with the chirped superlattice, which is expected to provide a built-in electric field. As a result, the efficiency of collection of photoexcited charge carriers (and, hence, the net quantum efficiency and thus responsivity) should increase significantly.

Gunapala, Sarath↗
NASA NTRS2003

Material for surface-enhanced Raman spectroscopy, and SER sensors and method for preparing same

Metal-doped sol-gel materials, suitable for use as sensors for surface-enhanced Raman spectroscopic analysis for trace chemical detection, are produced by effecting gelation and solvent removal of a doped sol-gel under mild temperature conditions. At least in certain instances reaction and drying will desirably be effected in an oxygen-starved environment. The metal of the sol-gel material functions, when irradiated, to produce a plasmon field for interaction with molecules of an analyte in contact therewith, increasing by orders of magnitude Raman photons that are generate by excitation radiation, and the method allows matching of the metal and metal particle size to a wavelength of light (or incident radiation, e.g., laser radiation) to generate surface plasmons. The porosity of the sol-gel material dramatically increases the surface area, and thereby the amount of metal exposed for analyte interaction. The sensors provided may be in the form of glass vials, fiber optics, multi-well micro-sample plates, etc., having surface coatings of the doped sol-gel material, to provide sampling systems for use in a Raman instrument.

Farquharson, Stuart↗
DOE OSTI2021

Tuning 2D magnetism in Fe 3+X GeTe 2 films by element doping

Two-dimensional (2D) ferromagnetic materials have been discovered with tunable magnetism and orbital-driven nodal-line features. Controlling the 2D magnetism in exfoliated nanoflakes via electric/magnetic fields enables a boosted Curie temperature (T C ) or phase transitions. One of the challenges, however, is the realization of high T C 2D magnets that are tunable, robust and suitable for large scale fabrication. Here, we report molecular-beam epitaxy growth of wafer-scale Fe 3+X GeTe 2 films with T C above room temperature. By controlling the Fe composition in Fe 3+X GeTe 2 , a continuously modulated T C in a broad range of 185–320 K has been achieved. This widely tunable T C is attributed to the doped interlayer Fe that provides a 40% enhancement around the optimal composition X = 2. We further fabricated magnetic tunneling junction device arrays that exhibit clear tunneling signals. Our results show an effective and reliable approach, i.e. element doping, to producing robust and tunable ferromagnetism beyond room temperature in a large-scale 2D Fe 3+X GeTe 2 fashion.

2D ferromagnetic material↗
DOE OSTI2020

Thermal Stability and Decomposition Products of P-Doped Ferrihydrite

This work aimed to determine the effect of various amounts of P admixtures in synthetic ferrihydrite on its thermal stability, transformation processes, and the properties of the products, at a broad range of temperatures up to 1000 °C. A detailed study was conducted using a series of synthetic ferrihydrites Fe 5 HO 8 ·4H 2 O doped with phosphates at P/Fe molar ratios of 0.2, 0.5, and 1.0. Ferrihydrite was synthesized by a reaction of Fe 2 (SO 4 ) 3 with 1 M KOH at room temperature in the presence of K 2 HPO 4 at pH 8.2. The products of the synthesis and the products of heating were characterized at various stages of transformation by using differential thermal analysis accompanied with X-ray diffraction, Fourier transform infrared spectroscopy, and scanning electron microscopy-energy dispersive X-ray spectroscopy. Coprecipitation of P with ferrihydrite results in the formation of P-doped 2-line ferrihydrite. A high P content reduces crystallinity. Phosphate significantly inhibits the thermal transformation processes. The temperature of thermal transformation increases from below 550 to 710–750 °C. Formation of intermediate maghemite and Fe-phosphates, is observed. The product of heating up to 1000 °C contains hematite associated with rodolicoite FePO 4 and grattarolaite Fe 3 PO 7 . Higher P content greatly increases the thermal stability and transformation temperature of rodolicoite as well.

thermal transformations↗
DOE OSTI2021

Spin waves in doped graphene: A time-dependent spin density functional approach to collective excitations in paramagnetic two-dimensional Dirac fermion gases

In spin-polarized itinerant electron systems, collective spin-wave modes arise from dynamical exchange and correlation (xc) effects. We consider here spin waves in doped paramagnetic graphene with adjustable Zeeman-type band splitting. The spin waves are described using time-dependent spin density functional response theory, treating dynamical xc effects within the Slater and Singwi-Tosi-Land-Sjölander approximations. We obtain spin-wave dispersions and spin stiffnesses as a function of doping and spin polarization, and we discuss the prospects for their experimental observation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2017

Effect of Ar ion-beam-assistance and substrate temperature on physical properties of Al-doped ZnO thin films deposited by RF magnetron sputtering

Highlights: • AZO and IAZO (303–473 K) films were grown by RF magnetron sputtering technique. • Ar ion-beam converts its kinetic energy as diffusion energy to the deposited atoms. • Structural evolution relies on diffusion energy imparted to the deposited atoms. • Surface texture densify under the aid of ion-beam and substrate temperature. - Abstract: In this study, pronounced effects of ion-beam-assistance and substrate temperature were revealed by exploring the physical properties of Al-doped ZnO thin films deposited by the RF magnetron sputtering technique. Herein, two measurable parameters, ion-beam discharge current (0.1 A) and substrate temperature (303–473 K) were adopted to regulate the structural changes in Al-doped ZnO films. Specifically, progressive structural changes were achieved based on the addition of Ar ion-beam during the film growth. From XRD analysis, we observed significant structural changes that provided an improvement in the film growth towards c-axis (002) plane. In addition, FESEM and AFM analyses demonstrated excellent surface features with the assisted Ar ion-beam. As a result of this process, we effectively modulated the binding energy of Zn 2p level. Finally, the structural investigation accurately demonstrated that the dependence of assisted ion-beam and substrate temperature linearly related to the superior visible transmittance and reduced band gap.

36 MATERIALS SCIENCE↗
DOE OSTI2019

High-temperature superconductivity in monolayer Bi 2 Sr 2 CaCu 2 O 8+δ

Atomically-thin layered van der Waals crystals represent ideal material systems in the ultimate two-dimensional (2D) limit. The reduction in dimensionality fundamentally alters the electronic structure of the materials, often with profound consequences as best exemplified by the emergence of Dirac fermion in graphene. Vast opportunities exist in extending this top-down approach to other material systems. Among all layered materials, high-temperature superconductors stand out for their fundamental importance in material research, and for their potential impact on future technology. Experimental efforts obtaining intrinsic monolayers from bulk high-temperature superconductors, however, are faced with tremendous difficulties. Here, we developed a new fabrication process that enabled us to produce intrinsic monolayer crystals of high-temperature superconductor Bi 2 Sr 2 CaCu 2 O 8+δ (Bi-2212; here monolayer refers to a half unit cell that contains two CuO 2 planes). We discovered that the highest superconducting transition temperature, T c , of monolayer Bi-2212 is as high as that of optimally doped bulk. The lack of dimensionality effect on T c defies expectations from Mermin–Wagner theorem; it also sharply contrasts with much reduced T c in conventional superconductors in 2D limit. Being atomically thin, monolayer Bi-2212 offers unprecedented tunability over its doping and disorder level across the superconductor-insulator transition (SIT). Finite size scaling analysis at SIT reveals that the system belongs to two distinct universality classes, and provides a unified picture for disparate observations in cuprate systems. Finally, our results establish monolayer Bi-2212 as an ideal platform for studying high-temperature superconductivity (HTS) and other strongly correlated phenomena in 2D.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Shubnikov–de Haas Effect and Electrophysical Properties of the Topological Insulator Sb{sub 2 –x}Cu{sub x}Te{sub 3}

The results of the study of the influence of Cu on the Shubnikov–de Haas effect and the electrical properties of p-Sb{sub 2 –x}Cu{sub x}Te{sub 3} single crystals (0 ≤ x ≤ 0.1) are presented. In the framework of the parabolic model of the energy spectrum, the hole concentrations and the Fermi energy in Sb{sub 2 –x}Cu{sub x}Te{sub 3} are calculated based on the oscillation frequencies of the magnetoresistance. It is shown that doping by Cu has an acceptor effect and significantly increases the frequencies of Shubnikov–de Haas oscillations. A plateau is observed in the dependences of the Hall resistance on magnetic field. The dependences of the resistance on temperature obey the power law with the exponent m = 1.2, which is characteristic of scattering on phonons with the contribution of scattering on ionized impurities. Unlike other impurities, the exponent remains almost unchanged when doped by Cu to the maximum concentrations studied.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗