Search NASA⌕ Search

SEARCH · Search NASA

Results for “dynamic diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
NASA NTRS1996

Gas-Phase Combustion Synthesis of Aluminum Nitride Powder

Due to its combined properties of high electrical resistivity and high thermal conductivity aluminum nitride (AlN) is a highly desirable material for electronics applications. Methods are being sought for synthesis of unagglomerated, nanometer-sized powders of this material, prepared in such a way that they can be consolidated into solid compacts having minimal oxygen content. A procedure for synthesizing these powders through gas-phase combustion is described. This novel approach involves reacting AlCl3, NH3, and Na vapors. Equilibrium thermodynamic calculations show that 100% yields can be obtained for these reactants with the products being AlN, NaCl, and H2. The NaCl by-product is used to coat the AlN particles in situ. The coating allows for control of AlN agglomeration and protects the powders from hydrolysis during post-flame handling. On the basis of thermodynamic and kinetic considerations, two different approaches were employed to produce the powder, in co-flow diffusion flame configurations. In the first approach, the three reactants were supplied in separate streams. In the second, the AlCl3 and NH3 were premixed with HCl and then reacted with Na vapor. X-ray diffraction (XRD) spectra of as-produced powders show only NaCl for the first case and NaCl and AlN for the second. After annealing at 775 C tinder dynamic vacuum, the salt was removed and XRD spectra of powders from both approaches show only AlN. Aluminum metal was also produced in the co-flow flame by reacting AlCl3 with Na. XRD spectra of as-produced powders show the products to be only NaCl and elemental aluminum.

Axelbaum, R. L.↗
DOE OSTI2021

Inverted metamorphic GaInAs solar cell grown by dynamic hydride vapor phase epitaxy

We present an inverted metamorphic rear heterojunction ~1.0 eV GaInAs solar cell deposited by dynamic hydride vapor phase epitaxy (D-HVPE) with high growth rate. This device uses a Ga 1-x In x P compositionally graded buffer (CGB) to bridge the lattice constant gap between the GaAs substrate and the Ga0.71In0.29As emitter layer. High-resolution x-ray diffraction and transmission electron microscopy confirm that the Ga 0.71 In 0.29 As emitter is grown lattice-matched to the in-plane lattice constant of the CGB with minimal generation of defects at the GaInAs/GaInP interface. The device contains a threading dislocation density of 2.3 × 10 6 cm -2 , a level that enables high-performance minority carrier devices and is comparable to previously demonstrated GaInP CGBs grown by D-HVPE. The device exhibits an open-circuit voltage of 0.589 V under a one-sun AM1.5G illumination condition and a bandgap-voltage offset of 0.407 V, indicating metamorphic epitaxial performance nearly equal to state-of-the-art devices. We analyze the dark current of the device and determine that reducing recombination in the depletion region, which can be achieved by reducing the threading dislocation density and optimizing the device doping density, will improve the device performance. Furthermore, the CGB and device layers, comprising ~8 µm of thickness, are grown in under 10 min, highlighting the ability of D-HVPE to produce high-quality metamorphic devices of all types with the potential for dramatically higher throughput compared to present technology.

14 SOLAR ENERGY↗
DOE OSTI2019

Correlation of Tensile Deformation-Induced Strain in HSLA Steel with Residual Stress Distribution

During service, due to the dynamic loading rates encountered, structural components experience varying levels of plastic deformation which leads to changes in the mechanical behavior of materials. The dynamic loading leads to non-homogenous plastic deformation which changes the residual stress distribution. In this study, the magnitude and distribution of residual stress in tensile tested specimens of high-strength low-alloy steel were investigated using x-ray diffraction technique, by varying the deformation rate. Tensile testing was performed at four different strain rates, and residual stress measurement was done along the length of the fractured specimens. Distribution of residual stress was observed all along the length of the specimens which is attributed to the varying levels of plastic deformation. Measured residual stresses are correlated with elastic strain and plastic strain obtained from the tensile tests. Consistent decrease in the magnitude of residual stress with an increase in plastic strain is observed with decreasing strain rate at the necking region. Specimen with lower yield strength experienced higher plastic strains, hence lower elastic residual stresses. The reasons for the observed distribution of residual stress are discussed with XRD peak broadening associated with plastic deformation.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Role of Equilibrium Fluctuations in Light-Induced Order

Engineering novel states of matter with light is at the forefront of materials research. An intensely studied direction is to realize broken-symmetry phases that are “hidden” under equilibrium conditions but can be unleashed by an ultrashort laser pulse. Despite a plethora of experimental discoveries, the nature of these orders and how they transiently appear remain unclear. To this end, we investigate a nonequilibrium charge density wave (CDW) in rare-earth tritellurides, which is suppressed in equilibrium but emerges after photoexcitation. Using a pump-pump-probe protocol implemented in ultrafast electron diffraction, we demonstrate that the light-induced CDW consists solely of order parameter fluctuations, which bear striking similarities to critical fluctuations in equilibrium despite differences in the length scale. By calculating the dynamics of CDW fluctuations in a nonperturbative model, we further show that the strength of the light-induced order is governed by the amplitude of equilibrium fluctuations. Overall, these findings highlight photoinduced fluctuations as an important ingredient for the emergence of transient orders out of equilibrium. Our results further suggest that materials with strong fluctuations in equilibrium are promising platforms to host hidden orders after laser excitation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2018

Grain boundary inter-connections in polycrystalline aluminum with random orientation

Highlights: • The GBICs in a pure aluminum are not random, showing remarkable preference on the planes of low Miller index. • {1 1 1}/{1 1 1} is the most frequent GBIC in pure aluminum. • {1 1 1}/{1 1 1} GBIC is mainly coming from the GBs formed by rotations around , and axes. • {1 1 1}/{1 1 1} GBIC possesses higher PCSD and definite dislocation structures compared to the general GBs. • To pursue {1 1 1}/{1 1 1} GBIC is a pint-cut for the GBE research in high stacking fault energy FCC materials. - Abstract: Grain boundary inter-connection (GBIC) is the matching of two crystallographic planes from two abutting grains ending on the grain boundary (GB) position in polycrystalline materials, which can be expressed as {h_1k_1l_1}/{h_2k_2l_2}. GBIC is the critical parameter that intrinsically defines the character and properties of a GB. In current work, a zone-melted polycrystalline aluminum bar with a purity higher than 99.99% (mass fraction) was subjected to a multi-directional forging (MDF) with a true strain of 4 followed by a recrystallization annealing at 360 °C. Such process repeated at least 4 times until an equiaxed-grain microstructure with random orientation and averaged grain size approximate 30 μm was achieved. Then the GBICs were determined by electron backscatter diffraction (EBSD) measurement and stereology-based five-parameter analysis (FPA) coupled with crystallographic analysis after the grain boundaries (GBs) were filtered according to their misorientations (e.g. angle/axis pair). The results revealed that the GBICs for any group of GBs with a given misorientation are not random, showing remarkable preference on the planes of low Miller index forming mixed and twist GBs. The work also demonstrated that among the high angle boundaries (HABs), {1 1 1}/{1 1 1}, including coherent ∑3 boundaries, is the most frequent GBIC, mainly due to the GBs formed by rotations around <1 1 1>, <1 2 2> and <1 1 2> axes. Near coincidence site (NCS) and O-lattice theory analyses indicate that the {1 1 1}/{1 1 1} GBICs usually possess higher planar coincidence site density (PCSD) and definite dislocation structures compared to the general GBs, implying their more structural stability when only crystallography is taken into account. This result agrees very well with the recent results obtained by molecular dynamic simulations. It is significant to the grain boundary engineering (GBE) in the high stacking fault energy (SFE) face-centered cubic (FCC) materials such as aluminum and its alloys.

36 MATERIALS SCIENCE↗
NASA NTRS1988

Crystal growth of CdTe in space and thermal field effects on mass flux and morphology

The primary, long-range goals are the development of vapor phase crystal growth experiments, and the growth of technologically useful crystals in space. The necessary ground-based studies include measurements of the effects of temperature variations on the mass flux and crystal morphology in vapor-solid growth processes. For in-situ mass flux measurements dynamic microbalance techniques will be employed. Crystal growth procedures and equipment will be developed to be compatible with microgravity conditions and flight requirements. Emphasis was placed on the further development of crystal growth and the investigation of relevant transport properties of CdTe. The dependence of the mass flux on source temperature was experimentally established. The CdTe synthesis and pretreatment procedures are being developed that yield considerable improvements in mass transport rates, and mass fluxes which are independent of the amount of source material. A higher degree of stoichiometric control of CdTe than before was achieved during this period of investigation. Based on this, a CdTe crystal growth experiment, employing physical vapor transport, yielded very promising results. Optical microscopy and X-ray diffraction studies revealed that the boule contained several large sized crystal grains of a high degree of crystallinity. Further characterization studies of CdTe crystals are in progress. The reaction chamber, furnace dimensions, and ampoule location of the dynamic microbalance system were modified in order to minimize radiation effects on the balance performance.

Wiedemeier, H.↗
DOE OSTI2025

Effects of Strain and Strain Rate on Dynamic Grain Growth and Subgrain Evolution During Plastic Deformation of an Interstitial-Free Steel at 850 ° C

Here, the effects of strain and strain rate on dynamic grain growth (DGG) and subgrain evolution are reported for an interstitial-free steel deformed at 850 ° C. Microstructures produced during tension tests at true-strain rates of 10 -4 and to 10 -3 s -1 true strains ranging from 0.02 to 0.2 were preserved following deformation. These were characterized using electron backscatter diffraction (EBSD), including the application of spherical harmonic transform indexing to produce high-angular-resolution EBSD (HR-EBSD) data. HR-EBSD data resolved the small misorientation angles of subgrain boundaries while imaging much larger data fields than possible with previously available techniques. The resulting data confirmed that steady-state flow stress is inversely proportional to the average subgrain size and that subgrain boundary misorientation angle increases with strain. The following new observations are reported. The rate of DGG increased with respect to time but decreased with respect to strain as strain rate increased. This behavior is rationalized through a simple model using separate rate parameters for the effects of time and strain. Subgrain size was not constant during steady-state deformation, but decreased slowly with increasing strain. Subgrain size distributions and subgrain boundary misorientation angle distributions were measured, and both remained approximately log-normal during steady-state deformation. Subgrain evolution demonstrated no dependence on parent grain size, crystallographic orientation, or Taylor factor. These new data suggest that steady-state flow stress is more likely controlled by the dislocation density internal to subgrains than by the spacing between subgrain boundaries.

dynamic grain growth↗
DOE OSTI2021

On the Development of Order and Interfaces during the Growth of Ultrathin La 2 CuO 4 Films by Molecular Beam Epitaxy

While the atomic structure of interfaces in complex oxide heterostructures created by epitaxial growth has been investigated extensively, few studies have been conducted on how interfaces form and restructure at the initial stage of film growth. The dynamic aspects of the growth behavior can strongly influence the final interfacial atomic structure, which may lead to the emergence of interface-specific properties, such as the rise of interfacial superconductivity between certain Ruddlesden-Popper oxide materials. In this report, the structural development of La2CuO 4 thin films grown by molecular beam epitaxy on a LaSrAlO 4 substrate is investigated by X-ray diffraction measurements with rapid scans over a volume of reciprocal space. This method provides far more detailed information on interface formation than traditional fixed-point measurements. The results show that the atomic structure of the interface becomes fully established after just a single unit cell of growth. Interestingly, restructuring continues to occur within the topmost half to one unit cell of the film during the deposition process. However, diffraction intensity oscillations from both reflection high-energy electron and X-ray measurements stabilize only after the growth of two unit cells, indicating that the growth front morphology continues to evolve until the start of the third unit cell. This multimodal investigation provides insights into the atomic processes taking place during layered oxide interface formation, including the dynamical rearrangement of LaO and CuO 2 layers. Such information is not only relevant to the engineering and optimization of functional layer structures but can also be critical for ultrathin films.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Spatially resolved phase transformation mapping in 410 stainless steel during additive manufacturing visualized via real-time infrared data

Here, in this study, we demonstrate that spatially resolved cooling curves derived from real-time infrared (IR) thermography during additive manufacturing (AM) can capture spatial variations in phase transformation temperatures through cooling curve analysis (CCA). Using this approach, we show that during laser hot-wire deposition of 410 stainless steel (410SS), the martensite start temperature (M s ) evolves dynamically throughout the build. The M s temperature is spatially nonuniform, ranging from 185 °C to 348 °C, with the lowest values toward the build center and higher values toward the upper region of the deposit. In the lower portion of the build, no M s inflection is detected via CCA, consistent with transformation occurring earlier during thermal cycling followed by tempering during subsequent thermal cycles. These trends in M s are corroborated by characterizing the microstructure by electron backscatter diffraction (EBSD). Traditionally, M s is assumed to be constant, and a single interpass temperature is applied during both deposition and residual stress modeling. Our results demonstrate that IR-derived cooling curves provide a route to spatially and temporally resolved transformation temperature tracking for dynamic interpass control and improved residual-stress modeling.

Additive manufacturing↗
DOE OSTI2025

Microscopic changes governing melting anisotropy: Real-time nanosecond x-ray diffraction

To understand the microscopic origins governing melting anisotropy, in-situ x-ray diffraction (XRD) measurements were obtained in aluminum single crystals shocked along $\langle$100$\rangle$ and $\langle$110$\rangle$ to stresses below and above the melting threshold for each orientation. XRD results and analysis for the two orientations showed significant differences in the microstructure prior to the melting threshold stresses, demonstrating the key role of deformation induced microstructure – in addition to temperature and pressure – on the melting transition. As a result, our findings make a strong case for reconsidering theoretical approaches to melting, specifically for dislocation mediated melting, in shock compressed solids.

crystal melting↗
DOE OSTI2023

Influence of defects on the femtosecond laser damage resistance of multilayer dielectric gratings

Multilayer dielectric (MLD) gratings with high diffraction efficiency and a high laser-induced damage (LID) threshold for pulse compressors are key to scaling the peak and average power of chirped pulse amplification lasers. However, surface defects introduced by manufacturing, storage, and handling processes can reduce the LID resistance of MLD gratings and impact the laser output. The underlying mechanisms of such defect-initiated LID remain unclear, especially in the femtosecond regime. In this Letter, we model dynamic processes in interactions of a 20-fs near-infrared (NIR) laser pulse and a MLD grating design in the presence of cylindrically symmetrical nodules and particle contaminants and cracks at the surface. Utilizing a dynamic model based on a 2D finite difference in time domain (FDTD) field solver coupled with photoionization, electron collision, and refractive index modification, we study the simulation results for the damage site distribution initiated by defects of various types and sizes and its impact on the LID threshold of the grating design.

Zhang, Simin (ORCID:0000000174948230)↗
DOE OSTI2017

Mineralization dynamics of metakaolin-based alkali-activated cements

This paper investigates the early-age dynamics of mineral formation in metakaolin-based alkali-activated cements. The effects of silica availability and alkali content on mineral formation were investigated via X-ray diffraction and solid-state {sup 29}Si magic-angle spinning nuclear magnetic resonance spectroscopy at 2, 7, 14, and 28 days. Silica availability was controlled by using either liquid- (immediate) or solid-based (gradual) sodium silicate supplements. Mineral (zeolitic) and amorphous microstructural characteristics were correlated with observed changes in bulk physical properties, namely shrinkage, density, and porosity. Results demonstrate that, while alkali content controls the mineralization in immediately available silica systems, alkali content controls the silica availability in gradually available silica systems. Immediate silica availability generally leads to a more favorable mineral formation as demonstrated by correlated improvements in bulk physical properties.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Attosecond Transient Grating Spectroscopy with Near-Infrared Grating Pulses and an Extreme Ultraviolet Diffracted Probe

Transient grating spectroscopy has become a mainstay among metal and semiconductor characterization techniques. Here, we extend the technique toward the shortest achievable time scales by using tabletop high-harmonic generation of attosecond extreme ultraviolet (XUV) pulses that diffract from transient gratings generated with sub-5 fs near-infrared (NIR) pulses. We demonstrate the power of attosecond transient grating spectroscopy (ATGS) by investigating the ultrafast photoexcited dynamics in an Sb semimetal thin film. ATGS provides an element-specific, background-free signal unfettered by spectral congestion, in contrast to transient absorption spectroscopy. With ATGS measurements in Sb polycrystalline thin films, we observe the generation of coherent phonons and investigate the lattice and carrier dynamics. Among the latter processes, we extract carrier thermalization, hot carrier cooling, and electron-hole recombination, which are on the order of 20 fs, 50 fs, and 2 ps time scales, respectively. Furthermore, the simultaneous collection of transient absorption and transient grating data allows us to extract the total complex dielectric constant in the sample dynamics with a single measurement, including the real-valued refractive index, from which we are also able to investigate carrier-phonon interactions and longer-lived phonon dynamics. The outlined experimental technique expands the capabilities of transient grating spectroscopy and attosecond spectroscopies by providing a wealth of information concerning carrier and lattice dynamics with an element-selective technique at the shortest achievable time scales.

Quintero-Bermudez, Rafael↗
DOE OSTI2025

Pressure induced irreversible phase transformation in an ordered high-entropy alloy

We report on a pressure induced irreversible phase transformation in an ordered eutectic high-entropy alloy (EHEA) AlCoCrFeNi2.1. The suction cast sample was synthesized by arc melting of raw elements resulting in an ordered B2 and FCC phase mixture for eutectic AlCoCrFeNi2.1 alloy. This phase mixture was confirmed by transmission electron microscopy (TEM) where superlattice reflections corresponding to ordered B2 phase were observed while the FCC phase remains disordered. The B2 phase was observed to be enriched in Nickel and Aluminum while the surrounding FCC phase is enriched in Fe, Cr and Co. The suction-cast EHEA sample was studied by X-ray diffraction under high pressure in a diamond anvil cell with platinum pressure marker to 73 GPa at ambient temperature. The B2 to FCC phase transformation is completed by 3 GPa in sharp contrast to BCC to FCC phase transition of 21 GPa in additively manufactured EHEA samples. The X-ray diffraction and TEM studies of pressure recovered samples show presence of only FCC grains without any specific orientation with respect to starting sample. These results are consistent with molecular dynamics simulations that the presence of B2 phase aids in the formation of the B2 to FCC phase transition under high pressures.

36 MATERIALS SCIENCE↗
DOE OSTI2019

In situ and operando investigation of the dynamic morphological and phase changes of a selenium-doped germanium electrode during (de)lithiation processes

To understand the effect of selenium doping on the good cycling performance and rate capability of a Ge 0.9 Se 0.1 electrode, the dynamic morphological and phase changes of the Ge 0.9 Se 0.1 electrode were investigated by synchrotron-based operando transmission X-ray microscopy (TXM) imaging, X-ray diffraction (XRD), and X-ray absorption spectroscopy (XAS). The TXM results show that the Ge 0.9 Se 0.1 particle retains its original shape after a large volume change induced by (de)lithiation and undergoes a more sudden morphological and optical density change than pure Ge. The difference between Ge 0.9 Se 0.1 and Ge is attributed to a super-ionically conductive Li–Se–Ge network formed inside Ge 0.9 Se 0.1 particles, which contributes to fast Li-ion pathways into the particle and nano-structuring of Ge as well as buffering the volume change of Ge. The XRD and XAS results confirm the formation of a Li–Se–Ge network and reveal that the Li–Se–Ge phase forms during the early stages of lithiation and is an inactive phase. The Li–Se–Ge network also can suppress the formation of the crystalline Li 15 Ge 4 phase. Finally, these in situ and operando results reveal the effect of the in situ formed, super-ionically conductive, and inactive network on the cycling performance of Li-ion batteries and shed light on the design of high capacity electrode materials.

25 ENERGY STORAGE↗
DOE OSTI2021

Relaxed tarantula skeletal muscle has two ATP energy-saving mechanisms

Myosin molecules in the relaxed thick filaments of striated muscle have a helical arrangement in which the heads of each molecule interact with each other, forming the interacting-heads motif (IHM). In relaxed mammalian skeletal muscle, this helical ordering occurs only at temperatures >20°C and is disrupted when temperature is decreased. Recent x-ray diffraction studies of live tarantula skeletal muscle have suggested that the two myosin heads of the IHM (blocked heads [BHs] and free heads [FHs]) have very different roles and dynamics during contraction. Here, we explore temperature-induced changes in the BHs and FHs in relaxed tarantula skeletal muscle. We find a change with decreasing temperature that is similar to that in mammals, while increasing temperature induces a different behavior in the heads. At 22.5°C, the BHs and FHs containing ADP.Pi are fully helically organized, but they become progressively disordered as temperature is lowered or raised. Our interpretation suggests that at low temperature, while the BHs remain ordered the FHs become disordered due to transition of the heads to a straight conformation containing Mg.ATP. Above 27.5°C, the nucleotide remains as ADP.Pi, but while BHs remain ordered, half of the FHs become progressively disordered, released semipermanently at a midway distance to the thin filaments while the remaining FHs are docked as swaying heads. We propose a thermosensing mechanism for tarantula skeletal muscle to explain these changes. Our results suggest that tarantula skeletal muscle thick filaments, in addition to having a superrelaxation–based ATP energy-saving mechanism in the range of 8.5–40°C, also exhibit energy saving at lower temperatures (<22.5°C), similar to the proposed refractory state in mammals.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2019

Lattice dynamics of the hybrid improper ferroelectrics (Ca, Sr) 3 Ti 2 O 7

The structure and lattice dynamics of the hybrid improper ferroelectric compound Ca 3 - x Sr x Ti 2 O 7 (for x = 0 , 0.6 , and 0.9) have been studied with a combination of diffraction, inelastic scattering experiments, Raman spectroscopy, and calorimetry measurements, as well as first-principles simulations. Using inelastic neutron scattering, we have measured the phonon density of states (DOS) for x = 0.9 , which revealed a strong broadening but little change in phonon energies on heating from 10 K to 728 K across the ferroelectric phase transition temperature, T F E . Using inelastic x-ray scattering, the momentum-resolved phonon dispersions were measured from 80 K to 950 K on a single crystal (for x = 0.6 ), and also revealed a strong phonon broadening but a small energy shift for acoustic modes on heating across T F E . Additionally, our Raman measurements (for x = 0.6 ) showed robust rotational and oxygen breathing modes but soft tilt modes, consistent with previous measurements on similar compounds. Our density functional calculations achieve good agreement with both the phonon DOS and dispersions measured. We did not observe any unusual quadratic dispersion for c -polarized transverse acoustic modes, at odds with a recently predicted quasi-2D character, for either undoped ( x = 0 ) or doped ( x = 0.6 ) compounds. 0.6) compounds.

36 MATERIALS SCIENCE↗
DOE OSTI2024

New physical processes for extracting GPDs with a better sensitivity to partonic structure

We introduce a new type of exclusive processes for a better study of generalized parton distributions (GPDs), which we refer to as single-diffractive hard exclusive processes (SDHEPs). We advocate a two-stage framework for picturing SDHEPs based on the separation of scales, which gives a clear description both kinematically and dynamically. We examine the sensitivity of the SDHEP to the parton momentum fraction x -dependence of GPDs, and demonstrate it quantitatively with two specific processes that can be readily measured at J-PARC or AMBER using a pion beam and at JLab using a photon beam, respectively. Both processes are capable of providing enhanced sensitivity to the x -dependence, overcoming the problem of shadow GPDs, and disentangling different types of GPDs with various spin asymmetries.

Qiu, Jianwei↗