Search NASA⌕ Search

SEARCH · Search NASA

Results for “electronic data storage”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

pH-Dependent Reduction Potentials and Proton-Coupled Electron Transfer Mechanisms in Hydrogen-Producing Nickel Molecular Electrocatalysts

The nickel-based Ph Bz 2 2 P N electrocatalysts, which are comprised of a nickel atom and two 1,5-dibenzyl-3,7-diphenyl-1,5-diaza-3,7-diphosphacyclooctane ligands, have been shown to effectively catalyze H2 production in acetonitrile. Recent electrochemical experiments revealed a linear dependence of the NiII/I reduction potential on pH, suggesting a proton-coupled electron transfer (PCET) reaction. In the proposed mechanism, the catalytic cycle begins with a PCET process involving electrochemical electron transfer to the nickel center and intermolecular proton transfer from an acid to the pendant amine ligand. This paper presents quantum mechanical calculations of this PCET process to examine the thermodynamics of the sequential mechanisms, in which either the electron or the proton transfers first (ET–PT and PT–ET, respectively), and the concerted mechanism (EPT). The favored mechanism depends on a balance among many factors, including the acid strength, association free energy for the acid–catalyst complex, PT free energy barrier, and ET reduction potential. The ET reduction potential is less negative after PT, favoring the PT–ET mechanism, and the association free energy is less positive after reduction, favoring the ET–PT mechanism. The calculations, along with analysis of the experimental data, indicate that the sequential ET–PT mechanism is favored for weak acids because of the substantial decrease in the association free energy after reduction. For strong acids, however, the PT–ET mechanism may be favored because the association free energy is somewhat smaller and PT is more thermodynamically favorable. The concerted mechanism could also occur, particularly for intermediate acid strengths. In the context of the entire catalytic cycle for H2 production, the initial PCET process involving intermolecular PT has a more negative reduction potential than the subsequent PCET process involving intramolecular PT. As a result, the second PCET should occur spontaneously, which is consistent with cyclic voltammogram experiments. This research was supported as part of the Center for Molecular Electrocatalysis, an Energy Frontier Research Center funded by the U. S. Department of Energy, Office of Science, Office of Basic Energy Sciences.

Horvath, Samantha↗

Observation of e{sup +}e{sup -}{yields}{rho}{sup +}{rho}{sup -} near {radical}(s)=10.58 GeV

We report the first observation of e{sup +}e{sup -}{yields}{rho}{sup +}{rho}{sup -}, in a data sample of 379 fb{sup -1} collected with the BABAR detector at the PEP-II e{sup +}e{sup -} storage ring at center-of-mass energies near {radical}(s)=10.58 GeV. We measure a cross section of {sigma}(e{sup +}e{sup -}{yields}{rho}{sup +}{rho}{sup -})=8.3{+-}0.7(stat){+-}0.8(syst) fb within the range of |cos{theta}*|<0.8 and |cos{theta}{sub {+-}}|<0.85, where {theta}* is the center-of-mass polar angle of the {rho}{sup {+-}} meson and {theta}{sub {+-}} are the angles in the {rho}{sup {+-}} rest frame between the direction of the boost from the laboratory frame and the direction of the {pi}{sup {+-}}. Assuming production through single-photon annihilation, there are three independent helicity amplitudes. We measure the ratios of their squared moduli to be |F{sub 00}|{sup 2} ratio |F{sub 10}|{sup 2} ratio |F{sub 11}|{sup 2}= 0.51{+-}0.14(stat){+-}0.07(syst) ratio 0.10{+-}0.04(stat){+-}0.01(syst) ratio 0.04{+-}0.03(stat){+-}0.01(syst). The |F{sub 00}|{sup 2} result is inconsistent with the prediction of 1.0 made by QCD models with a significance of 3.1 standard deviations including systematic uncertainties.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of time-dependent CP asymmetry in B{sup 0}{yields}K{sub S}{sup 0}{pi}{sup 0}{gamma} decays

We measure the time-dependent CP asymmetry in B{sup 0}{yields}K{sub S}{sup 0}{pi}{sup 0}{gamma} decays for two regions of K{sub S}{sup 0}-{pi}{sup 0} invariant mass, m(K{sub S}{sup 0}{pi}{sup 0}), using the final BABAR data set of 467x10{sup 6} BB pairs collected at the PEP-II e{sup +}e{sup -} collider at SLAC. We find 339{+-}24 B{sup 0}{yields}K*{sup 0}{gamma} candidates and measure S{sub K*{gamma}}=-0.03{+-}0.29{+-}0.03 and C{sub K*{gamma}}=-0.14{+-}0.16{+-}0.03. In the range 1.1<m(K{sub S}{sup 0}{pi}{sup 0})<1.8 GeV/c{sup 2} we find 133{+-}20 B{sup 0}{yields}K{sub S}{sup 0}{pi}{sup 0}{gamma} candidates and measure S{sub K{sub S}{sup 0}}{sub {pi}{sup 0}}{sub {gamma}}=-0.78{+-}0.59{+-}0.09 and C{sub K{sub S}{sup 0}}{sub {pi}{sup 0}}{sub {gamma}}=-0.36{+-}0.33{+-}0.04. The uncertainties are statistical and systematic, respectively.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Phase Separation in the Iron Chalcogenide Superconductor Fe1+yTexSe1−x

We present direct evidence for phase separation and chemical inhomogeneity in Fe{sub 1+y}Te{sub x}Se{sub 1-x} single crystals from scanning transmission electron microscopy (STEM) and electron energy-loss spectroscopy (EELS) data. In STEM, images recorded using a high-angle annular dark field (HAADF) detector show characteristic nanometer-scale patterns of phase separation from the Z-dependent image contrast. The separation was observed both in non-superconducting samples with excess iron and in superconducting samples. Using EELS, we determined {approx}20% (or lower) fluctuation in Te concentration from the average local compositions by integrating the intensity of the Te-M{sub 4,5} edge. The energy-loss near-edge structure (ELNES) of the Fe-L{sub 2,3} edge changes with varying composition, especially the L{sub 3}/L{sub 2} white-line intensity ratio, which is sensitive to the d-state occupancy of the Fe. The results suggest a miscibility gap in the Fe{sub 1+y}Te{sub x}Se{sub 1-x} system and changes in the d-electron states at the nanometer scale from the separated phases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Incorporating Amino Acid Esters into Catalysts for Hydrogen Oxidation: Steric and Electronic Effects and the Role of Water as a Base

Four derivatives of a hydrogen oxidation catalyst, [Ni(P Cy 2 N Bn-R 2 ) 2 ] 2+ (Cy = cyclohexyl, Bn = benzyl, R = OMe, COOMe, CO-alanine-methyl ester, CO-phenylalanine-methyl ester), have been prepared to investigate steric and electronic effects on catalysis. Each complex was characterized spectroscopically and electrochemically, and thermodynamic data were determined. Crystal structures are also reported for the -OMe and -COOMe derivatives. All four catalysts were found to be active for H 2 oxidation. The methyl ester (R = COOMe) and amino acid ester containing complexes (R = CO-alanine-methyl ester or CO-phenylalanine-methyl ester) had rates slower (4 s –1 ) than that of the parent complex (10 s –1 ), in which R = H, which is consistent with the lower amine pK a 's and less favorable ΔG H 2 's found for these electron-withdrawing substituents. Dynamic processes for the amino acid ester containing complexes were also investigated and found not to hinder catalysis. The electron-donating methyl ether derivative (R = OMe) was prepared to compare electronic effects and has a catalytic rate similar to that of the parent complex. In the course of these studies, it was found that water could act as a weak base for H 2 oxidation, although catalytic turnover requires a higher potential and utilizes a different sequence of catalytic steps than when using a base with a higher pK a . Finally and importantly, these catalysts provide a foundation upon which larger peptides can be attached to [Ni(P Cy 2 N Bn 2 ) 2 ] 2+ hydrogen oxidation catalysts in order to more fully investigate and implement the effects of the outer coordination sphere.

amino acid catalysts↗

Assessing cathode property prediction via exchange-correlation functionals with and without long-range dispersion corrections

In this work, we benchmark calculated interlayer spacings, average topotactic voltages, thermodynamic stabilities, and band gaps in layered lithium transition-metal oxides (TMOs) and their de-lithiated counterparts, which are used in lithium-ion batteries as positive electrode materials, against available experimental data. Specifically, we examine the accuracy of properties calculated within density functional theory (DFT) using eight different treatments of electron exchange-correlation: the strongly constrained and appropriately normed (SCAN) and Perdew–Burke–Ernzerhof (PBE) density functionals, Hubbard-U-corrected SCAN and PBE (i.e., SCAN+U and PBE+U), and SCAN(+U) and PBE(+U) with added long-range dispersion (D) interactions (i.e., DFT(+U)+D). van der Waals interactions are included respectively via the revised Vydrov-Van Voorhis (rVV10) for SCAN(+U) and the DFT-D3 for PBE(+U). We find that SCAN-based functionals predict larger voltages due to an underestimation of stability of the MO2 systems, while also predicting smaller interlayer spacings compared to their PBE-based counterparts. Furthermore, adding dispersion corrections to PBE has a greater effect on voltage predictions and interlayer spacings than with SCAN, indicating that DFT-SCAN – despite being a ground-state theory – fortuitously captures some short and medium-range dispersion interactions better than PBE. While SCAN-based and PBE-based functionals yield qualitatively similar band gap predictions, there is no significant quantitative improvement of SCAN-based functionals over the corresponding PBE-based versions. Finally, we expect SCAN-based functionals to yield more accurate property predictions than the respective PBE-based functionals for most TMOs, given SCAN's stronger theoretical underpinning and better predictions of systematic trends in interlayer spacings, intercalation voltages, and band gaps obtained in this work.

25 ENERGY STORAGE↗

Oxide Growth and Validation for Aluminum Research Reactor Fuel - 19422

Aluminum fuel cladding will undergo general corrosion with resulting formation of adherent oxide films during in-reactor and post-discharge exposures under various water conditions and temperatures. These oxides include chemically-bound water that can pose challenges for extended dry storage. This paper describes laboratory experiments performed to produce hydroxide (oxide) films on aluminum 1100, 6061 and 5052 series alloy substrates immersed in water at controlled temperatures. The results are compared to the oxide film present on a spent fuel assembly irradiated in research reactor. This work is part of a broad investigation to address knowledge gaps and technical data needs for dry storage of aluminum-clad spent nuclear fuel (SNF). To adequately assess the risks posed by chemically-bound water on SNF in dry storage and strategies for removing chemically bound water, it is necessary to understand the expected composition and loading of oxide films on SNF of different service histories and to investigate the response of such oxides to irradiation and potential drying methods. These efforts require both the growth of films under controlled conditions and the production of non-radioactive surrogates for testing. The current work comprises experimental investigation of oxide growth via (1) laboratory experiments to produce hydroxide films on aluminum alloy substrates immersed in water at controlled temperatures and (2) characterization and comparison of laboratory-grown oxides to oxides on service-exposed aluminum alloys. The important factors affecting oxide growth and characteristics typical of oxide films formed by aqueous corrosion under conditions similar to in-reactor are reviewed. Aluminum oxide films were grown under a variety of controlled temperature conditions and durations to serve as surrogates for oxides found on aluminum-clad spent nuclear fuel due to aqueous corrosion. The chemically-bound water found in oxides formed by aqueous corrosion poses challenges for extended dry storage, requiring investigation of how the oxide loading and characteristics vary with exposure history and to provide the initial condition for investigation of drying methods. Characteristics including chemical composition, oxide morphology, and film thickness were measured to assess whether the surrogate films were representative of in-service-produced oxides on SNF. Tests were conducted in liquid water at atmospheric pressure in the temperature range 50-100 deg. C, with and without heat flux through the corroding surface, to replicate in-service conditions, and at 185 deg. C inside pressure vessels to replicate pre-filming procedures. Three different alloys commonly used in aluminum clad research reactor fuel were considered: Al-1100, Al-6061, and Al-5052. Specimens were characterized by weighing before and after exposure to measure oxide mass loading, X-ray diffraction to identify oxide composition, and scanning electron microscopy to examine the oxide morphology and film thickness. The oxide type and the morphological characteristics of the film on a fuel element from the Uruguay RU1 research reactor were determined and compared to the laboratory surrogates. The results show some differences compared to the 50 deg. C laboratory specimen that are rationalized with the service storage history of the element. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Lepton flavors at the early CERN LHC experiments as the footprints of the dark matter producing mechanisms

The minimal supergravity (mSUGRA) parameter space corresponding to light sleptons well within the reach of LHC and relatively light squarks and gluinos (mass {<=}1 TeV) has three regions consistent with the Wilkinson Microwave Anisotropy Probe data on dark matter relic density and direct mass bounds from LEP 2. Each region can lead to distinct leptonic signatures from squark-gluino events during the early LHC experiments (integrated luminosity {approx}10 fb{sup -1} or even smaller) due to the distinct features of the 2-body leptonic decay modes of the electroweak gauginos, produced in squark-gluino decay cascades, in each region. In the much studied stau-LSP coannihilation region with a vanishing common trilinear coupling (A{sub 0}) at the grand unified theory scale, a large fraction of the final states contains electrons and/or muons and e-{mu}-{tau} universality holds to a good approximation. In the not so well-studied scenarios with nonvanishing A{sub 0} both lightest supersymmetric particle (LSP) pair annihilation and stau-LSP coannihilation could contribute significantly to the dark matter relic density for even smaller squark-gluino masses. Our simulations using Pythia indicate that the corresponding signatures are final states rich in {tau}-leptons while final states with electrons and muons are suppressed leading to a violation of lepton universality. These features may be observed to a lesser extent even in the modified parameter space (with nonzero A{sub 0}) where the coannihilation process dominates. We also show that the generic m-leptons+n-jets+Ee{sub T} signatures without flavor tagging can also discriminate among the three scenarios. However, the signals become more informative if the {tau} and b-jet tagging facilities at the LHC experiments are utilized.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

AI-assisted detector design for the EIC (AID(2)E)

Artificial Intelligence is poised to transform the design of complex, large-scale detectors like ePIC at the future Electron Ion Collider. Featuring a central detector with additional detecting systems in the far forward and far backward regions, the ePIC experiment incorporates numerous design parameters and objectives, including performance, physics reach, and cost, constrained by mechanical and geometric limits. This project aims to develop a scalable, distributed AI-assisted detector design for the EIC (AID(2)E), employing state-of-the-art multiobjective optimization to tackle complex designs. Supported by the ePIC software stack and using G EANT 4 simulations, our approach benefits from transparent parameterization and advanced AI features. The workflow leverages the PanDA and iDDS systems, used in major experiments such as ATLAS at CERN LHC, the Rubin Observatory, and sPHENIX at RHIC, to manage the compute intensive demands of ePIC detector simulations. Tailored enhancements to the PanDA system focus on usability, scalability, automation, and monitoring. Ultimately, this project aims to establish a robust design capability, apply a distributed AI-assisted workflow to the ePIC detector, and extend its applications to the design of the second detector (Detector-2) in the EIC, as well as to calibration and alignment tasks. Additionally, we are developing advanced data science tools to efficiently navigate the complex, multidimensional trade-offs identified through this optimization process.

97 MATHEMATICS AND COMPUTING↗

Maintenance of Maywood Laboratory Operations Support During Contractor Transition and Replacement of the Project Databases - 16329

In December 2013, Cabrera Services (Cabrera) executed transition of the FUSRAP Maywood Superfund Site remediation project operations, including an on-site accredited environmental lab, from a large business that had established technology infrastructure in place for over a decade which required updating to support the expected remediation scope and client needs. As of November 2015, Cabrera has shipped over 116,000 yd{sup 3} of contaminated soil to disposal facilities. During the transition, the USACE FUSRAP Maywood Laboratory (UFML) continued to support project operations, providing the expected timely and reliable results and maintaining their New Jersey Department of Environmental Protection certification for all parameters of concern, while having to cope with new challenges and additional tasks having the potential to disrupt the laboratory's ability to support project operations. This case study examines the challenges with maintaining a certified radiochemistry laboratory and an aggressive remediation schedule during a period of prime contractor transition which included a complete IT infrastructure overhaul, and conversion of the existing Microsoft Access laboratory database and project Electronic Data Management System (EDMS) to a customized commercial solution. Challenges: I. Procurement of a new database subcontractor and working closely with them to achieve the following: a. Migration of all environmental (including radiological, chemical, and quality control), health and safety, and spatial data as well as reports, queries, and analytical instrument software processes from a MS Access data management system to a SQL server system; and b. Verification that the functionality and data integrity of the databases remained intact. II. The onsite laboratory was changed over to a new onsite network and the following tasks were completed with little or no interruption to site operations by January 10, 2014: i. Installation of new instrument personal computers (PCs) and making them fully operational; ii. Configuration of the lab domain and server to host the LIMS (replaced all servers/domain/workstations with Windows 7 and Server 2012 machines). iii. Networking of the laboratory building into the rest of the project site via fiber optic cabling across the site. iv. Upgrade of the wide area network (WAN) data connection to high-speed Fiber Optic service; v. Upgrade of the telephones into voice over internet protocol (VOIP) phones. vi. Splitting of the database into front ends and a centralized back-end hosted on the new server to allow simultaneous access for fixes and improvements. III. Phone service interruption; phone systems were operational by January 10, 2014. Additional Tasks: I. Revision of the USACE FUSRAP Maywood Laboratory (UFML) Quality Systems Manual Rev. 1 Submitted 01/16/14; II. Writing of the Uniform Federal Policy Quality Assurance Project Plan Rev. 1 (UFP-QAPP) submitted 1/21/14. This document replaced the prior project data quality plan, the Chemical Data Quality Management Plan. III. Support of USACE communications to the New Jersey Department of Environmental Protection (NJDEP) on lab management and personnel transition to Cabrera. This work was important since it ensured a smooth transition and shows how critical project records infrastructure such as databases, can be upgraded with minimal interruption of project support. Such work may provide benefit to other similar projects, especially long term projects where database infrastructure upgrades may be beneficial in terms of improved efficiencies in data recording and transfer, and improved security in data storage. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Photon Reconstruction and Identification with the ATLAS detector

The understanding of the photons reconstruction will be one of the key issues at the start-up of data-taking with the ATLAS experiment at the LHC. Large statistics samples of photons produced in association with jets are expected over a wide range of E{sub T}.The photon reconstruction is based on an electromagnetic-cluster-seeded algorithm which classifies as photons those clusters which have no matching prompt track. These are then subdivided into converted or non-converted photon candidates depending on the presence of one or more tracker-reconstructed electron-positron pairs pointing to it. The precise knowledge of the material upstream the calorimeter and a correct treatment of the converted photons are critical for a correct photon reconstruction and identification.The photon identification is based almost entirely on the analysis of the shower shapes in the calorimeter. The goal is to achieve an efficient photon selection in the range from 20 GeV to several hundreds GeV with a rejection of 10{sup 3}-10{sup 4} against QCD jets in the moderate transverse momentum region of 20 to 100 GeV, which is the relevant one for H->gammagamma searches.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Observation of the chi_c2(2P) meson in the reaction gamma gamma -> D Dbar at BaBar

A search for the Z(3930) resonance in {gamma}{gamma} production of the D{bar D} system has been performed using a data sample corresponding to an integrated luminosity of 384 fb{sup -1} recorded by the BABAR experiment at the PEP-II asymmetric-energy electron-positron collider. The D{bar D} invariant mass distribution shows clear evidence of the Z(3930) state with a significance of 5.8{sigma}. We determine mass and width values of (3926.7 {+-} 2.7 {+-} 1.1)MeV/c{sup 2} and (21.3 {+-} 6.8 {+-} 3.6)MeV, respectively. A decay angular analysis provides evidence that the Z(3930) is a tensor state with positive parity and C-parity (J{sup PC} = 2{sup ++}); therefore we identify the Z(3930) state as the {chi}{sub c2}(2P) meson. The value of the partial width {Lambda}{sub {gamma}{gamma}} x {Beta}(Z(3930) {yields} D{bar D}) is found to be (0.24 {+-} 0.05 {+-} 0.04) keV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of Bottom Versus Charm as a Function of Transverse Momentum with Electron-Hadron Correlations in p+p Collisions at sq root(s)=200 GeV

The momentum distribution of electrons from semileptonic decays of charm and bottom quarks for midrapidity |y|<0.35 in p+p collisions at sq root(s)=200 GeV is measured by the PHENIX experiment at the Relativistic Heavy Ion Collider over the transverse momentum range 2<p{sub T}<7 GeV/c. The ratio of the yield of electrons from bottom to that from charm is presented. The ratio is determined using partial D/D->e{sup +}-K{sup +}-X (K unidentified) reconstruction. It is found that the yield of electrons from bottom becomes significant above 4 GeV/c in p{sub T}. A fixed-order-plus-next-to-leading-log perturbative quantum chromodynamics calculation agrees with the data within the theoretical and experimental uncertainties. The extracted total bottom production cross section at this energy is sigma{sub bb}=3.2{sub -1.1}{sup +1.2}(stat){sub -1.3}{sup +1.4}(syst)mub.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Characterization of the Uranium-Bearing Products of the Ammonia Injection Remediation Method - 15707

Commissioned in 1943, the Hanford Site is the home of the world's first full-scale nuclear production facility. After more than 40 years of processing, improper discharge and failed storage tanks have resulted in the contamination of the Hanford vadose zone with radiologically contaminated waste. Remediation methods considered for the area include sequestration of the mobile uranium by injection of ammonia (NH{sub 3}) gas. Injection of this reactive gas increases the pore water pH, promoting the dissolution of soil minerals; a subsequent re-establishment of natural conditions is believed to result in the recrystallization of those soil minerals and the co-precipitation of uranium phases. Characterization of the precipitates formed when the ammonia (NH{sub 3}) injection method, proposed for the Hanford vadose zone, is applied to synthetic pore water on a laboratory scale. This involves: Identification of the uranium-bearing phases; A study of the effect of pore water constitution on the phases produced. Synthetic pore water solutions were prepared to mimic selected constituents of the pore water from the Hanford 200 Area: Varying constituent concentrations; Observations led to modifications to increase relative uranium content: 200 ppm → 500 ppm U; Substituted sodium silicate for silicic acid. Dried samples were analyzed by SEM-EDS and powder X-ray diffraction (XRD). A suspension in ethanol was prepared and analyzed by Transmission Electron Microscope (TEM) with Selective Area Electron Diffraction (SAED). Studied and applied geochemical modeling software (Visual Minteq and Geo-chemist's Workbench) for speciation and prediction of potential species formed. Discussion/Conclusions: - SEM-EDS Analysis: Scanning electron microscopy revealed areas of high average atomic weight which would be confirmed to be uranium-rich by energy dispersive spectroscopy analysis. The samples prepared with a more than two-fold increase in uranium concentration did not show the crystal-like forms spotted in the lower [U] samples. The samples prepared with silicic acid substituted in showed little to no uranium precipitation [not shown]. - Diffraction Analysis: Powder XRD analysis of the low [U] samples confirmed the presence of repeating crystalline patterns in the precipitate samples. Nitratine (NaNO{sub 3}) showed a massive presence, potentially obscuring significant peaks in the low [U] samples. Though it was not predicted, there was a tentative match for cejkaite (Na{sub 4}(UO{sub 2})(CO{sub 3}){sub 3}). Elevated uranium samples showed none of the needle-like crystalline shapes [diffraction data pending]. TEM - SAED confirmed the presence of a polycrystalline phase. Data analysis is complex but a comparison of average d-spacings with those of reference minerals could further support a match with cejkaite. - Geochemical Modeling: The system conditions were input into geochemical modeling software to predict the forms present throughout the reaction process. The model was used to demonstrate that the pH of the system could be increased using [NH{sub 4}{sup +}] in solution to better represent the system. Using the [NH{sub 4}{sup +}] increase, the changes in significant species with increasing pH were observed. Future Work: Repeat samples will be prepared and analyzed to bolster any potential identification. Promising samples will be submitted to the PNNL's EMSL facility, which is better equipped to perform the required analyses. An expanded study on the impact of carbonate (CO{sub 3}{sup 2-}) on the phases produced.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

{Upsilon} cross section in p+p collisions at {radical}(s)=200 GeV

We report on a measurement of the {Upsilon}(1S+2S+3S){yields}e{sup +}e{sup -} cross section at midrapidity in p+p collisions at {radical}(s)=200 GeV. We find the cross section to be 114{+-}38(stat+fit){sub -24}{sup +23}(syst) pb. Perturbative QCD calculations at next-to-leading order in the color evaporation model are in agreement with our measurement, while calculations in the color singlet model underestimate it by 2{sigma}. Our result is consistent with the trend seen in world data as a function of the center-of-mass energy of the collision and extends the availability of {Upsilon} data to RHIC energies. The dielectron continuum in the invariant-mass range near the {Upsilon} is also studied to obtain a combined yield of e{sup +}e{sup -} pairs from the sum of the Drell-Yan process and b-b production.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Investigations of Beam Dynamics Issues at Current and Future Hadron Accelerators (Final Report)

There is a synergy between the fields of Beam Dynamics (BD) in modern particle accelerators and Applied Mathematics (AMa). We have formulated significant problems in BD and have developed and applied tools within the contexts of dynamical systems, topological methods, numerical analysis and scientific computing, probability and stochastic processes, and mathematical statistics. We summarize the three main areas of our AMa work since 2011. First, we continued our study of Vlasov-Maxwell systems. Previously, we developed a state of the art algorithm and code (VM3@A) to calculate coherent synchrotron radiation in single pass systems. In this cycle we carefully analyzed the major expense, namely the integral-over-history (IOH), and developed two approaches to speed up integration. The first strategy uses a representation of the Bessel function J0 in terms of exponentials. The second relies on “local sequences” developed recently for radiation boundary conditions, which are used to reduce computational domains. Although motivated by practicality, both strategies involve interesting and rather deep analysis and approximation theory. As an alternative to VM3@A, we are integrating Maxwell’s equations by a time-stepping method, bypass- ing the IOH, using a Discontinuous Galerkin (DG) method. DG is a generalization of Finite Element and Finite Volume methods. It is spectrally convergent, unlike the commonly used Finite Difference methods, and can handle complicated vacuum chamber geometries. We have applied this in several contexts and have obtained very nice results including an explanation of an experiment at the Canadian Light Source, where the geometry is quite complex. Second, we continued our study of spin dynamics in storage rings. There is much current and proposed activity where spin polarized beams are being used in testing the Standard Model and its modifications. Our work has focused on invariant spin fields (ISFs) and amplitude dependent spin tunes (ADSTs), which are essential for estimating beam polarization. Several algorithms have been developed since the 1980s for computing the ISF, among them the Heinemann- Hoffstaetter method of stroboscopic averaging (SA) which is implemented in the code SPRINT. SA, which computes the ISF by using spin tracking data, can find the ISF to computer precision if it exists and thus can give evidence for existence of the ISF. Central to our work is resolving the ISF conjecture, which says that, off orbital resonance, an ISF exists. Thus Heinemann developed, in his 2010 PhD thesis, a new framework which unifies and generalizes the notions of ISF and ADST by using bundle theory. This lead to a long paper which was a major collaborative effort during the recent cycle. In a nutshell, our bundle approach elegantly unifies the dynamics of spin-1/2 and spin-1 particles, e.g., protons and deuterons. In fact it is well known that these two kinds of dynamics are driven by the same spin transfer matrix and in our approach one sees the deeper reason for this: the spin transfer matrix carries the natural dynamics of a principal bundle whereas the difference between the spin-1/2 and spin-1 dynamics lies in their different geometrical situation, i.e., different underlying associated bundles. Thus one arrives at new results for polarized beams, among them the Invariant Reduction Theorem (IRT) and the Cross Section Theorem (CST). The IRT gives a necessary and sufficient condition for the ISF to exist. The SA technique revealed, 20 years ago, that each ISF can be viewed as a complex agglomerate of spin tracking data. The bundle approach goes one step further by using the IRT and the CST to glue spin tracking data into agglomerates which are candidates for ISFs. We gain insight because the “good” agglomerates, in the presence of an ISF, are very different from the “bad” ones. Finally we mention that the bundle approach has analogies to the approach used in geometrical Yang-Mills theory. Third, we studied X-Ray Free Electron Lasers (FELs), which are electron accelerators producing coherent undulator radiation over a wide range of frequencies from microwaves to x-rays. The photon beams produced in FEL undulators are used to study material samples in biology, material science etc. We developed a mathematical analysis, based on the 6D Lorentz system, of energetic electrons moving through a planar undulator excited by a Maxwell traveling wave field of wavelength λ. Our Method of Averaging perturbation analysis yields non-resonant and near-to-resonant normal form approximations as a function of λ, which we present in two averaging theorems. We prove the theorems in detail, error bounds and giving a tutorial on mathematically rigorous perturbation theory in a context where proofs are easily understood. To our knowledge the planar problem has not been analyzed with the generality here nor has the standard FEL pendulum system, which appears on resonance, been derived with error bounds. In addition to the domains of validity of the normal forms we obtain new insights that require further study, including a more general low gain theory. With a firm foundation in the non-collective case above we are studying the 3D collective case from start up from noise to high gain and saturation. We have formulated the noise start up as a problem of going from the microscopic Klimontovich-Maxwell to the macroscopic Vlasov-Maxwell with a Vlasov correction term. In the 1D setting, we seek an alternative to the phenomenological Vlasov approach which models shot noise by a perturbation on an initial “smooth” density. The 1D wave equation with a Klimontovich source is often the starting point for the 1D FEL high gain theory. We have a new representation of solutions which may lead to new insights.

43 PARTICLE ACCELERATORS↗

Measurement of the branching fractions of the radiative charm decays D{sup 0}{yields}K*{sup 0}{gamma} and D{sup 0}{yields}{phi}{gamma}

We present a measurement of the branching fractions for the Cabibbo-favored radiative decay D{sup 0}{yields}K*{sup 0}{gamma} and the Cabibbo-suppressed radiative decay D{sup 0}{yields}{phi}{gamma}. These measurements are based on a data sample corresponding to an integrated luminosity of 387.1 fb{sup -1} and recorded with the BABAR detector at the PEP-II e{sup +}e{sup -} asymmetric-energy collider operating at center-of-mass energies 10.58 and 10.54 GeV. We measure the branching fractions relative to the well-studied decay D{sup 0}{yields}K{sup -}{pi}{sup +} and find B(D{sup 0}{yields}K*{sup 0}{gamma})/B(D{sup 0}{yields}K{sup -}{pi}{sup +})=(8.43{+-}0.51{+-}0.70)x10{sup -3} and B(D{sup 0}{yields}{phi}{gamma})/B(D{sup 0}{yields}K{sup -}{pi}{sup +})=(7.15{+-}0.78{+-}0.69)x10{sup -4}, where the first error is statistical and the second is systematic. This is the first observation of the decay mode D{sup 0}{yields}K*{sup 0}{gamma}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for f{sub J}(2220) in Radiative J/{psi} Decays

We present a search for f{sub J}(2220) production in radiative J/{psi}{yields}{gamma}f{sub J}(2220) decays using 460 fb{sup -1} of data collected with the BABAR detector at the SLAC PEP-II e{sup +}e{sup -} collider. The f{sub J}(2220) is searched for in the decays to K{sup +}K{sup -} and K{sub S}{sup 0}K{sub S}{sup 0}. No evidence of this resonance is observed, and 90% confidence level upper limits on the product of the branching fractions for J/{psi}{yields}{gamma}f{sub J}(2220) and f{sub J}(2220){yields}K{sup +}K{sup -}(K{sub S}{sup 0}K{sub S}{sup 0}) as a function of spin and helicity are set at the level of 10{sup -5}, below the central values reported by the Mark III experiment.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗