Search NASA⌕ Search

SEARCH · Search NASA

Results for “finite difference methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Cogging torque minimization in transverse flux machines

This study presents the design considerations in cogging torque minimization in two types of transverse flux machines. The machines have a double stator-single rotor configuration with flux concentrating ferrite magnets. One of the machines has pole windings across each leg of an E-Core stator. Another machine has quasi-U-shaped stator cores and a ring winding. The flux in the stator back iron is transverse in both machines. Different methods of cogging torque minimization are investigated. Key methods of cogging torque minimization are identified and used as design variables for optimization using a design of experiments (DOE) based on the Taguchi method. A multi-level DOE is proposed as an optimization method to reach an optimum solution with minimum simulations. The case study is analyzed in a two level DOE optimization. Finite element analysis is used to study the different effects. Two prototypes are fabricated for validating the FEA results.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Nonnegative methods for bilinear discontinuous differencing of the S N equations on quadrilaterals

Historically, matrix lumping and ad hoc flux fixups have been the only methods used to eliminate or suppress negative angular flux solutions associated with the unlumped bilinear discontinuous (UBLD) finite element spatial discretization of the two-dimensional S N equations. Though matrix lumping inhibits negative angular flux solutions of the S N equations, it does not guarantee strictly positive solutions. In this paper, we develop and define a strictly nonnegative, nonlinear, Petrov-Galerkin finite element method that fully preserves the bilinear discontinuous spatial moments of the transport equation. Additionally, we define two ad hoc fixups that maintain particle balance and explicitly set negative nodes of the UBLD finite element solution to zero but use different auxiliary equations to fully define their respective solutions. We assess the ability to inhibit negative angular flux solutions and the accuracy of every spatial discretization that we consider using a glancing void test problem with a discontinuous solution known to stress numerical methods. Though significantly more computationally intense, the nonlinear Petrov-Galerkin scheme results in a strictly nonnegative solution and is a more accurate solution than all the other methods considered. One fixup, based on shape preserving, results in a strictly nonnegative final solution but has increased numerical diffusion relative to the Petrov-Galerkin scheme and is less accurate than the UBLD solution. The second fixup, which preserves as many spatial moments as possible while setting negative values of the unlumped solution to zero, is less accurate than the Petrov-Galerkin scheme but is more accurate than the other fixup. However, it fails to guarantee a strictly nonnegative final solution. As a result, the fully lumped bilinear discontinuous finite element solution is the least accurate method, with significantly more numerical diffusion than the Petrov-Galerkin scheme and both fixups.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

A convergent 2D finite-difference scheme for the Dirac–Poisson system and the simulation of graphene

We present a convergent finite-difference scheme of second order in both space and time for the 2D electromagnetic Dirac equation. We apply this method in the self-consistent Dirac–Poisson system to the simulation of graphene. The model is justified for low energies, where the particles have wave vectors sufficiently close to the Dirac points. In particular, we demonstrate that our method can be used to calculate solutions of the Dirac–Poisson system where potentials act as beam splitters or Veselago lenses.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Numerical simulation of scattering of acoustic waves by inelastic bodies using hypersingular boundary integral equation

A numerical method for solving a problem of diffraction of acoustic waves by system of solid and thin objects based on the reduction the problem to a boundary integral equation in which the integral is understood in the sense of finite Hadamard value is proposed. To solve this equation we applied piecewise constant approximations and collocation methods numerical scheme. The difference between the constructed scheme and earlier known is in obtaining approximate analytical expressions to appearing system of linear equations coefficients by separating the main part of the kernel integral operator. The proposed numerical scheme is tested on the solution of the model problem of diffraction of an acoustic wave by inelastic sphere.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Protecting two-qubit quantum states by {pi}-phase pulses

We study the state decay of two qubits interacting with a common harmonic oscillator reservoir. We find both a decoherence error and the error caused by the amplitude change of the superradiant state. We show that frequent {pi}-phase pulses can eliminate both types of errors and therefore protect a two-qubit odd-parity state more effectively than the frequent measurement method. This shows that the methods using dynamical decoupling and the quantum Zeno effects actually can give rather different results when the operation frequency is finite.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Computational modeling of continuum scale constitutive equations to improve biomass feedstock material handling and conveying systems

Existing design practices for common feedstock handling equipment such as hoppers and screw feeders have not been successful in many situations. The lack of an appropriate toolset to characterize and model biomass flow behavior is deemed the root cause of plugging, stalls, and flow-related issues in biomass handling systems design and operations. New standardized characterization protocols in conjunction with appropriate constitutive models will lead to successful biomass handling system design and operations. This study investigates constitutive models for bulk solid flow based on the first principles to overcome issues in biomass handling. The focus is on two major issues in biomass handling, i.e., initiating and sustaining of flow in the hopper that is widely used in biomass conveying operation. Accordingly, this article focuses on analytical models of biomass hopper flow. Mohr-Coulomb, Drucker-Prager, and modified Cam-clay models are investigated as constitutive bulk solid flow models. Parameters of those models are determined using a set of triaxial tests. Triaxial tests are conducted using the cubical triaxial tester (CTT) in the Food and Biomaterials Lab of the Pennsylvania State University. Milled 1mm corn stover and 2mm wood chip biomass materials having different flow characteristics are examined, and their respective flow behavior out of a hopper are simulated using the Finite Element method implementing identified constitutive models and determined fundamental mechanical properties. It is found that, with the same hopper geometry, ground corn stover 1mm tends to exhibit funnel flow whereas ground Douglas fir 2 mm tends to exhibit mass flow. These simulation results are validated with hopper flow experiments. This study demonstrates how biomass flow problems can be predicted and mitigated by numerically modeled fundamental constitutive equations.

09 BIOMASS FUELS↗

Thermal behavior characterization of a kilowatt-power-level cryogenically cooled Yb:YAG active mirror laser amplifier

We present an analysis of the thermal behavior of a high-energy kilowatt-average-power diode-pumped cryogenically cooled Yb:YAG active mirror laser amplifier based on measurements and simulations. Maps of the temperature distribution of the laser material at pump powers up to 1 kW were obtained for the first time by spatially and spectrally resolving the fluorescence induced by a scanning probe beam. The wavefront distortion resulting from the front surface deformation and the overall deformation of the gain medium assembly were measured using a Mach–Zehnder interferometer. The measured deformations agree well with the results of thermomechanical modeling using finite element method simulations, and with the results of focal length shift measurements. The relative contributions to the optical path difference (OPD) of the mechanical deformations, refractive index changes, and electronic contribution are discussed. We propose that the Cr 4+ :YAG cladding plays a significant role in both the temperature distribution and the overall OPD changes. Moreover, the pump-induced mechanical deformations of the assembly dominate the OPD changes in this kilowatt-average-pump-power cryogenically cooled Yb:YAG active mirror laser.

36 MATERIALS SCIENCE↗

Brownian dynamics of confined suspensions of active microrollers

In this study, we develop efficient numerical methods for performing many-body Brownian dynamics simulations of a recently observed fingering instability in an active suspension of colloidal rollers sedimented above a wall [M. Driscoll, B. Delmotte, M. Youssef, S. Sacanna, A. Donev, and P. Chaikin, Nat. Phys. (2016), preprint arXiv:1609.08673. We present a stochastic Adams-Bashforth integrator for the equations of Brownian dynamics, which has the same cost but is more accurate than the widely used Euler-Maruyama scheme, and use a random finite difference to capture the stochastic drift proportional to the divergence of the configuration-dependent mobility matrix. We generate the Brownian increments using a Krylov method and show that for particles confined to remain in the vicinity of a no-slip wall by gravity or active flows, the number of iterations is independent of the number of particles. Our numerical experiments with active rollers show that the thermal fluctuations set the characteristic height of the colloids above the wall, both in the initial condition and the subsequent evolution dominated by active flows. Finally, the characteristic height in turn controls the time scale and wavelength for the development of the fingering instability

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Demonstration of Full Core Reactor Depletion with MPACT

MPACT is a three-dimensional (3-D) whole core transport code capable of generating sub-pin level power distributions. This feature is accomplished by obtaining the integral transport solutions to the heterogeneous reactor problem in which the actual detailed geometrical configuration of fuel components such as the pellet and cladding is modelled explicitly.. The cross section data needed for the neutron transport calculation are obtained directly from a multigroup microscopic cross section library similar to those used in lattice physics codes. Hence MPACT involves neither a priori homogenization nor group condensation for the core spatial solution. The integral transport solution is obtained by means of the method of characteristics (MOC) that employs discrete ray tracing. Since the direct application of the 3-D MOC capability in MPACT to 3-D core configuration requires considerable amounts of memory and computing time for practical reactor applications, an alternative approximate 3-D solution method was implemented in MPACT based on a 2D-1D approach which employs planar MOC solutions in the framework of the 3-D coarse mesh finite difference (CMFD) formulation. The axial coupling is resolved by one-dimensional (1-D) diffusion solutions and the planar and axial problems are coupled through the transverse leakage. The use of a lower order 1-D solution in the axial direction is justified by the fact that most heterogeneity in the core occurs in the radial direction rather than the axial. However, it is possible to use one of the higher order methods in MPACT such as the 1-D SN kernel if improved solution accuracy is desired. The CMFD formulation which originally served as an efficient nodal formulation is used in MPACT to accelerate the whole core transport calculation. The basic mesh in the CMFD formulation is a pin cell which is much coarser than the flat source regions defined for MOC calculations. The concept of dynamic homogenization of group constants for the pin cells provides the basis of the CMFD formulation in whole core transport calculation. The intra-cell flux distribution determined from the MOC calculation is used to generate the homogenized cell constants while the MOC cell surface averaged currents are used to determine the radial nodal coupling coefficients. This dynamic implementation of the equivalence theory formulation ensures the same transport solution is obtained with CMFD as the one obtained using unaccelerated MOC calculations alone. The ability of MPACT to predict the Hot, Zero Power (HZP) condition of a reactor was reported in CASL-U-2014-0045-000. The purpose of this report is to demonstrate the capability of MPACT to simulate the operation of a reactor at Hot, Full Power (HFP) conditions during normal operation throughout a full operating cycle. The time scale for a reactor burnup cycle is typically one to two years and therefore short time phenomena such as the effect of delayed neutrons can be neglected. Instead the time dependence can be treated quasi-statically using the depletion algorithm presented in CASL-U-2013-0276-001. The full power operation requires thermal hydraulic feedback to be present during the entire simulation which will utilize the work in CASL-U-2014-0051-000. However, due to the significant computational burden of the coupled physics simulation, a simplified thermal hydraulic model is used for the analysis reported here which is principally intended to demonstrate the full core neutronics depletion. In addition to the thermal hydraulic feedback, the effect of Boron 10 depletion should be modeled in cases where major boron additions are not performed for extended periods of time. Each of these capabilities will be described in the following sections.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Improving Tumor Treating Fields Treatment Efficacy in Patients With Glioblastoma Using Personalized Array Layouts

Purpose: To investigate tumors of different size, shape, and location and the effect of varying transducer layouts on Tumor Treating Fields (TTFields) distribution in an anisotropic model. Methods and Materials: A realistic human head model was generated from MR images of 1 healthy subject. Four different virtual tumors were placed at separate locations. The transducer arrays were modeled to mimic the TTFields-delivering commercial device. For each tumor location, varying array layouts were tested. The finite element method was used to calculate the electric field distribution, taking into account tissue heterogeneity and anisotropy. Results: In all tumors, the average electric field induced by either of the 2 perpendicular array layouts exceeded the 1-V/cm therapeutic threshold value for TTFields effectiveness. Field strength within a tumor did not correlate with its size and shape but was higher in more superficial tumors. Additionally, it always increased when the array was adapted to the tumor's location. Compared with a default layout, the largest increase in field strength was 184%, and the highest average field strength induced in a tumor was 2.21 V/cm. Conclusions: These results suggest that adapting array layouts to specific tumor locations can significantly increase field strength within the tumor. Our findings support the idea of personalized treatment planning to increase TTFields efficacy for patients with GBM.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Novel methods for the time-dependent Maxwell's equations and their applications

This dissertation investigates three different mathematical models based on the time-domain Maxwell's equations using three different numerical methods: a Yee scheme using a non-uniform grid, a nodal discontinuous Galerkin (nDG) method, and a newly developed discontinuous Galerkin method named the weak Galerkin (WG) method. The non-uniform Yee scheme is first applied to an electromagnetic metamaterial model. Stability and superconvergence error results are proved for the method, which are then confirmed through numerical results. Additionally, a numerical simulation of backwards wave propagation through a negative-index metamaterial is given using the presented method. Next, the nDG method is used to simulate signal propagation through a corrugated coaxial cable through the use of axisymmetric Maxwell's equations. Stability and error analysis are performed for the semi-discrete method, and are verified through numerical results. The nDG method is then used to simulate signal propagation through coaxial cables with a number of different corrugations. Finally, the WG method is developed for the standard time-domain Maxwell's equations. Similar to the other methods, stability and error analysis are performed on the method and are verified through a number of numerical experiments.

97 MATHEMATICS AND COMPUTING↗

Accurate modeling of plasma acceleration with arbitrary order pseudo-spectral particle-in-cell methods

Particle in Cell (PIC) simulations are a widely used tool for the investigation of both laser- and beam-driven plasma acceleration. It is a known issue that the beam quality can be artificially degraded by numerical Cherenkov radiation (NCR) resulting primarily from an incorrectly modeled dispersion relation. Pseudo-spectral solvers featuring infinite order stencils can strongly reduce NCR - or even suppress it - and are therefore well suited to correctly model the beam properties. For efficient parallelization of the PIC algorithm, however, localized solvers are inevitable. Arbitrary order pseudo-spectral methods provide this needed locality. Yet, these methods can again be prone to NCR. Here in this paper, we show that acceptably low solver orders are sufficient to correctly model the physics of interest, while allowing for parallel computation by domain decomposition.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Radial distribution of charged particles in a magnetic field

The radial spread of charged particles emitted from a point source in a magnetic field is a potential source of systematic error for any experiment where magnetic fields guide charged particles to detectors with finite size. Assuming uniform probability as a function of the phase along the particle’s helical trajectory, an analytic solution for the radial probability distribution function follows which applies to experiments in which particles are generated throughout a volume that spans a sufficient length along the axis of a homogeneous magnetic field. This approach leads to the same result as a different derivation given by Dubbers et al., Nucl. Instrum. Methods Phys. Res., Sect. A 763, 112–119 (2014). But the constant phase approximation does not strictly apply to finite source volumes or fixed positions, which lead to local maxima in the radial distribution of emitted particles at the plane of the detector. A simple method is given to calculate such distributions, then the effect is demonstrated with data from a {sup 207}Bi electron-conversion source in the superconducting solenoid magnet spectrometer of the Ultracold Neutron facility at the Los Alamos Neutron Science Center. Implications for neutron beta decay spectroscopy are discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Application of NEM-based Pin-by-Pin HCMFD Algorithm to 3-D Core Analysis

A pin-wise reactor analysis is expected to provide a more accurate solution than the conventional nodal methods. However, a pin-wise approach is still computationally very costly though the computational performances have been enormously improved for decades. To overcome such limitation of a pin-by-pin core analysis, the HCMFD (Hybrid Course-Mesh Finite Difference) algorithm has been recently introduced. By adopting the HCMFD algorithm, a parallel computing can be applied very effectively. In the HCMFD algorithm, an iterative local-global strategy is adopted with a combination of two CMFD acceleration methods for the pin-wise core analysis. The global eigenvalue problem is solved by one-node CMFD, while the local fixed-source problems are solved by two-node CMFD based on the NEM (nodal expansion method). In the HCMFD computational scheme, a parallel computing can effectively be applied since most of the computational efforts are consumed to solve the local problems, and they can be solved in parallel. Previously, only a 2-D HCMFD algorithm was developed and its numerical efficiency was evaluated. In this paper, a 3D HCMFD scheme is introduced and some 3-D problems were analyzed to verify its applicability to 3D pin-wise core analysis. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Optimal Polynomial Smoothers and One‐Sided V‐Cycles for Poisson Problems

The solution to the Poisson equation arising from the spectral element discretization of the incompressible Navier‐Stokes equations needs robust preconditioning strategies. One such strategy is multigrid. To realize the potential of multigrid methods, effective smoothing strategies are needed. Chebyshev polynomial smoothers, in conjunction with pointwise Jacobi or additive Schwarz methods (ASMs), prove to be an effective smoother. Other polynomial smoothers, however, may provide superior convergence to the multigrid preconditioner. The authors compare the standard Chebyshev polynomial smoothers to both the novel fourth‐kind Chebyshev polynomial smoothers proposed by Lottes as well as smoothers based on the polynomial of best uniform approximation to as proposed by Kraus, Vassilevski, and Zikatanov. At the cost of symmetry, further improvements may be made. For example, a order polynomial smoother on both sides of the V‐cycle may be substituted with an order polynomial smoother on one side at no additional cost. The choice of omitting the postsmoother in favor of higher‐order polynomial presmoothing is advantageous in cases where the multigrid approximation property constant is large. The authors consider a 2D model problem based on finite differences to motivate the choice of polynomial smoother, order, and whether to apply postsmoothing for the target application of high‐order ‐geometric multigrid methods for GPU architectures. Results from both domains demonstrate the substantial improvement of these approaches over the standard Chebyshev polynomial smoother with a symmetric V‐cycle.

97 MATHEMATICS AND COMPUTING↗

Erratum: “A finite difference Davidson procedure to sidestep full ab initio hessian calculation: Application to characterization of stationary points and transition state searches”

Certain key contributions to the field were not presented in the Introduction section of our recent paper. In addition to the variational method described in Ref. 14 and iterative diagonalization methods in Refs. 15–17, we wish to direct the attention of the reader to other significant efforts that have utilized similar principles for various applications. Reiher and Neugebauer developed a mode-tracking algorithm using the Davidson method for calculating only the modes relevant for vibrational analysis. Similarly, a block-Davidson approach via finite differentiation of the gradient was implemented for calculating hessian-vector products for normal mode analysis. Deglmann and Furche developed a method for stationary point characterization with density functional theory where full solution of all coupled-perturbed Kohn-Sham equations, the bottleneck in hessian calculation, could be avoided through iterative calculation of hessian-vector products to determine only the lowest eigenvalues.

99 GENERAL AND MISCELLANEOUS↗

Customizable two-species kinetic equilibria for nonuniform low-beta plasmas

Here, two methods are developed for constructing self-consistent two-species kinetic equilibria for low-beta electrostatic plasmas, in which the magnetic field is uniform and fixed in time. The first method uses Taylor series approximations to construct distribution functions that can be specified analytically. The second method relies on numerically solving a nonlinear ordinary differential equation and produces exact—to numerical precision—equilibria. In both methods, the equilibrium distribution functions for ions and electrons are expressed in terms of constants of motion and satisfy the steady-state Vlasov-Poisson equation system. Provided that the ion drift speed does not exceed the ion thermal speed, the equilibria can be specified with customizable density and electrostatic potential profiles. The methods can thereby be tailored to different applications and are successfully applied to construct kinetic equilibria for cross-field plasmas with sheared flows, large density variations, and different levels of magnetization. The equilibria are used to initialize fourth-order finite-volume Vlasov-Poisson simulations in (x, v x , v y ) coordinates and the associated temporal evolution is used to assess the accuracy of each method. Lastly, the low-amplitude deviations observed in these simulations demonstrate that the kinetic equilibria are robust and that they provide a valuable means of studying the dynamics of nonuniform magnetized plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗