C++ Polynomial Fit
C++PolyFit fits multi-dimensional data points with a least-squared polynomial of arbitrary degree, up to 3 dimensions.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
C++PolyFit fits multi-dimensional data points with a least-squared polynomial of arbitrary degree, up to 3 dimensions.
NOvA is a two detector, long baseline neutrino oscillation experiment designed to study $\nu_{e}$ ($\bar{\nu}_{e}$) appearance and $\nu_{\mu}$ ($\bar{\nu}_{\mu}$) disappearance in a $\nu_{\mu}$ ($\bar{\nu}_{\mu}$) beam produced at Fermilab. The near detector (ND) is located 100 meters underground at a distance of 1 km from the target whereas the far detector (FD) is located on the surface, 810 km away from the beam source in Ash River, MN. The ND is used to measure the beam before oscillations and the FD measures the oscillated spectrum. The ND and the FD are functionally identical detectors and the ND spectra are extrapolated to the FD to predict the signal and background spectra expected in the FD. The extrapolation and data fitting techniques developed for these analyses within NOvA are presented.
Motivated by the good Tsallis fits to the high-pT spectra in pp collisions at the LHC, we study the relativistic hard-scattering model and obtain an approximate analytical expression for the differential hard-scattering cross section at \eta~0. The power-law behavior of the transverse spectra, in the form of d\sigma/ dpT^2 ~ 1/pT^n, gives a power index n in the range of 4.5-5.5 for jet production as predicted by pQCD, after the dependencies of the structure functions and the running coupling constant are properly taken into account. The power indices for hadron production n are slightly greater than those for jet production.
University research reactors have been a cornerstone of nuclear engineering research and education since the first reactor was deployed at North Carolina State University in the 1950s. The population of university reactors grew to a high of almost 80 in 1970 but has dropped to 25 operating today, also shrinking the community, availability of vendors and the talent pipeline. The nation’s fleet of TRTRs serves as a vital resource for educating the next generation of nuclear engineers and as a flexible testbed for innovative reactor technologies. Typically, the reactors have a very small staff with responsibilities ranging through research and operations, isotope production, regulatory compliance, facility maintenance, and university teaching obligations. Knowledge transfer and staffing were identified as critical areas in a recent study of US university research reactor fitness. This panel discusses the unique challenges and potential solutions to these issues.
A composite torque pipe to metal fitting joint including concentric inner and outer shells formed with respective smooth conical surfaces projecting distally and respectively tapered radially inwardly and radially outwardly to form an annulus expanding in thickness for receipt of a tapered connector ring complementally shaped at one end of a composite pipe and bonded along the interface. The present invention includes selecting the sleeves with the corresponding shells and, forming the torque pipe with the tapered ring and bonding the tapered ring in the annulus.
This study explores the impact of wastes generated from potential future fuel cycles and the issues presented by classifying these under current classification criteria, and discusses the possibility of a comprehensive and consistent characteristics-based classification framework based on new waste streams created from advanced fuel cycles. A static mass flow model, Fuel-Cycle Integration and Tradeoffs (FIT), was used to calculate the composition of waste streams resulting from different nuclear fuel cycle choices. This analysis focuses on the impact of waste form heat load on waste classification practices, although classifying by metrics of radiotoxicity, mass, and volume is also possible. The value of separation of heat-generating fission products and actinides in different fuel cycles is discussed. It was shown that the benefits of reducing the short-term fission-product heat load of waste destined for geologic disposal are neglected under the current source-based radioactive waste classification system, and that it is useful to classify waste streams based on how favorable the impact of interim storage is in increasing repository capacity. (authors)
This study explores the impact of wastes generated from potential future fuel cycles and the issues presented by classifying these under current classification criteria, and discusses the possibility of a comprehensive and consistent characteristics-based classification framework based on new waste streams created from advanced fuel cycles. A static mass flow model, Fuel-Cycle Integration and Tradeoffs (FIT), was used to calculate the composition of waste streams resulting from different nuclear fuel cycle choices. Because heat generation is generally the most important factor limiting geological repository areal loading, this analysis focuses on the impact of waste form heat load on waste classification practices, although classifying by metrics of radiotoxicity, mass, and volume is also possible. Waste streams generated in different fuel cycles and their possible classification based on the current U.S. framework and international standards are discussed. It is shown that the effects of separating waste streams are neglected under a source-based radioactive waste classification system. (authors)
To investigate the possibility of using HOM signals induced in SC cavities as beam and cavity diagnostics, narrow band (20 MHz) data was recorded around the strong TE111-6(6{pi}/9-like) dipole modes (1.7 GHz) in the 40 L-band (1.3 GHz) cavities at the DESY TTF facility. The analyses of these data have so far focused on using a Singular Value Decomposition (SVD) technique to correlate the signals with each other and data from conventional BPMs to show the dipole signals provide an alternate means of measuring the beam trajectory. However, these analyses do not extract the modal information (i.e., frequencies and Q's of the nearly degenerate horizontal and vertical modes). In this paper, we described a method to fit the signal frequency spectrum to obtain this information, and then use the resulting mode amplitudes and phases together with conventional BPM data to determine the mode polarizations and relative centers and tilts. Compared with the SVD analysis, this method is more physical, and can also be used to obtain the beam position and trajectory angle.
Radioactive wastes are confined in 49 underground storage tanks at the Savannah River Site. The tanks are examined by ultrasonic (UT) methods for thinning, pitting, and stress corrosion cracking in order to assess fitness-for-service. During an inspection in 2002, ten cracks were identified on one of the tanks. Given the location of the cracks (i.e., adjacent to welds, weld attachments, and weld repairs), fabrication details (e.g., this tank was not stress-relieved), and the service history the degradation mechanism was stress corrosion cracking. Crack instability calculations utilizing API-579 guidance were performed to show that the combination of expected future service condition hydrostatic and weld residual stresses do not drive any of the identified cracks to instability. The cracks were re-inspected in 2007 to determine if crack growth had occurred. During this re-examination, one indication that was initially reported as a 'possible perpendicular crack <25% through wall' in 2002, was clearly shown not to be a crack. Additionally, examination of a new area immediately adjacent to other cracks along a vertical weld revealed three new cracks. It is not known when these new cracks formed as they could very well have been present in 2002 as well. Therefore, a total of twelve cracks were evaluated during the re-examination. Comparison of the crack lengths measured in 2002 and 2007 revealed that crack growth had occurred in four of the nine previously measured cracks. The crack length extension ranged from 0.25 to 1.8 inches. However, in all cases the cracks still remained within the residual stress zone (i.e., within two to three inches of the weld). The impact of the cracks that grew on the future service of Tank 15 was re-assessed. API-579 crack instability calculations were again performed, based on expected future service conditions and trended crack growth rates for the future tank service cycle. The analysis showed that the combined hydrostatic and weld residual stresses do not drive the identified cracks to instability. This tank expected to be decommissioned in the near future. However, if these plans are delayed, it was recommended that a third examination of selected cracks in the tank be performed in 2014.
The use of fast-response liquid scintillators for passive measurements with highly enriched uranium (HEU) castings provides information on the timescale of the fission chain multiplication process for HEU. Thus, these detectors produce time responses characteristic of the HEU and not the moderator around 3He counters. Up to five HEU castings were assembled, and the passive time coincidence measurements performed. The prompt neutron decay constants inferred from the Feynman variance data with the arrays of large liquid scintillators are compared with decay constants obtained from previously presented Feynman variance data collected in active interrogation measurements with these same HEU castings. The active measurements used plastic scintillation detectors adjacent to the castings to eliminate time-of-flight effects and showed that the prompt neutron decay constant is clearly not exponential. However, time-of-flight effects in the passive measurements result in exponential behavior and allow the Feynman variance data to be fit with the well-known point kinetics analytical formula. The characterization of the prompt neutron decay constant is investigated by comparing the results of the passive and active measurement data.
Reverse Monte Carlo (RMC) refinements of local structure using a simultaneous fit of X-ray/neutron total scattering and extended X-ray absorption fine structure (EXAFS) data were developed to incorporate an explicit treatment of both single- and multiple-scattering contributions to EXAFS. The refinement algorithm, implemented as an extension to the public domain computer software RMCProfile, enables accurate modeling of EXAFS over distances encompassing several coordination shells around the absorbing species. The approach was first tested on Ni, which exhibits extensive multiple scattering in EXAFS, and then applied to perovskite-like SrAl{sub 1/2}Nb{sub 1/2}O{sub 3}. This compound crystal1izes with a cubic double-perovskite structure but presents a challenge for local-structure determination using a total pair-distribution function (PDF) alone because of overlapping peaks of the constituent partial PDFs (e.g. Al-O and Nb-O or Sr-O and O-O). The results obtained here suggest that the combined use of the total scattering and EXAFS data provides sufficient constraints for RMC refinements to recover fine details of local structure in complex perovskites. Among other results, it was found that the probability density distribution for Sr in SrAl{sub 1/2}Nb{sub 1/2}O{sub 3} adopts T{sub d} point-group symmetry for the Sr sites, determined by the ordered arrangement of Al and Nb, as opposed to a spherical distribution commonly assumed in traditional Rietveld refinements.
Not Available
The choice of knot vector has immense influence on the resulting accuracy of a B-spline approximation of a curve. However, despite the significance of this problem and the various solutions that were proposed in the literature, optimizing the number and placement of knots remains a difficult task. This paper presents a novel method for the approximation of a curve by a B-spline of arbitrary order, which automatically determines a knot vector that achieves high approximation quality. Additionally, at the core of our approach is a feature function that characterizes the amount and spatial distribution of geometric details in the input curve by estimating its derivatives. Knots are then selected in such a way as to evenly distribute the feature contents across their intervals. A comparison to the state of the art for a wide variety of curves shows that our method is faster and achieves more accurate reconstruction results, while typically reducing the number of necessary knots.
We discuss the least-squares and linear-regression methods, which are relevant for a reliable determination of good nuclear-mass-model parameter sets and their errors. In this perspective, we define exact and inaccurate models and point out differences in using the standard error analyses for them. As an illustration, we use simple analytic models for nuclear binding energies and study the validity and errors of models' parameters and uncertainties of its mass predictions. In particular, we show explicitly the influence of mass-number-dependent weights on uncertainties of liquid-drop global parameters.
No abstract prepared.
Gas gun shock-to-detonation experiments provide data for calibrating HE burn models. At LANL the principal diagnostic is a magnetic gauge package that provides data on the lead shock trajectory, which is used to determine the run-distance to detonation, and the lead shock speed with run distance, which together with jump-off velocity of the velocity gauges determines Hugoniot locus points for the reactants.
No abstract available
Atmospheric turbulence models are necessary for the design of both inlet/engine and flight controls, as well as for studying coupling between the propulsion and the vehicle structural dynamics for supersonic vehicles. Models based on the Kolmogorov spectrum have been previously utilized to model atmospheric turbulence. In this paper, a more accurate model is developed in its representative fractional order form, typical of atmospheric disturbances. This is accomplished by first scaling the Kolmogorov spectral to convert them into finite energy von Karman forms and then by deriving an explicit fractional circuit-filter type analog for this model. This circuit model is utilized to develop a generalized formulation in frequency domain to approximate the fractional order with the products of first order transfer functions, which enables accurate time domain simulations. The objective of this work is as follows. Given the parameters describing the conditions of atmospheric disturbances, and utilizing the derived formulations, directly compute the transfer function poles and zeros describing these disturbances for acoustic velocity, temperature, pressure, and density. Time domain simulations of representative atmospheric turbulence can then be developed by utilizing these computed transfer functions together with the disturbance frequencies of interest.