Search NASA⌕ Search

SEARCH · Search NASA

Results for “gap analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Reduced-order simulation of large accelerator structures

Simulating electromagnetic waves inside finite periodic or almost periodic three-dimensional structures is important to research in linear particle acceleration, high power microwave generation, and photonic band gap structures. While eigenmodes of periodic structures can be determined from analysis of a single unit cell, based on Floquet theory, the general case of aperiodic structures, with defects or nonuniform properties, typically requires 3D electromagnetic simulation of the entire structure. When the structure is large and high accuracy is necessary this can require high-performance computing techniques to obtain even a few eigenmodes [Z. Li et al., Nucl. Instrum. Methods Phys. Res., Sect. A 558, 168 (2006)]. To confront this problem, we describe an efficient, field-based algorithm that can accurately determine the complete eigenmode spectrum for extended aperiodic structures, up to some chosen frequency limit. The new method combines domain decomposition with a nontraditional, dual eigenmode representation of the fields local to each cell of the structure. Two related boundary value eigenproblems are solved numerically in each cell, with (a) electrically shielded, and (b) magnetically shielded interfaces, to determine a combined set of basis fields. By using the dual solutions in our field representation we accurately represent both the electric and magnetic surface currents that mediate coupling at the interfaces between adjacent cells. The solution is uniformly convergent, so that typically only a few modes are used in each cell. We present results from 2D and 3D simulations that demonstrate the speed and low computational needs of the algorithm.

43 PARTICLE ACCELERATORS↗

Rapidity Gap Events for Squark Pair Production at the LHC

The exchange of electroweak gauginos in the t- or u-channel allows squark pair production at hadron colliders without color exchange between the squarks. This can give rise to events where little or no energy is deposited in the detector between the squark decay products. We discuss the potential for detection of such rapidity gap events at the Large Hadron Collider (LHC). We present an analysis with full event simulation using PYTHIA as well as Herwig++, but without detector simulation. We analyze the transverse energy deposited between the jets from squark decay, as well as the probability of finding a third jet in between the two hardest jets. For the mSUGRA benchmark point SPS1a we find statistically significant evidence for a color singlet exchange contribution.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the valence band-offset in a PbSe/ZnO heterojunction by x-ray photoelectron spectroscopy

A heterojunction of PbSe/ZnO has been grown by molecular beam epitaxy. X-ray photoelectron spectroscopy was used to directly measure the valence-band offset (VBO) of the heterojunction. The VBO, {Delta}E{sub V}, was determined as 2.51 {+-} 0.05 eV using the Pb 4p{sup 3/2} and Zn 2p{sup 3/2} core levels as a reference. The conduction-band offset, {Delta}E{sub C}, was, therefore, determined to be 0.59 {+-} 0.05 eV based on the above {Delta}E{sub V} value. This analysis indicates that the PbSe/ZnO heterojunction forms a type I (Straddling Gap) heterostructure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The effect of stiffness and mass on coupled oscillations in a phononic crystal

Insight into phononic bandgap formation is presented using a first principles-type approach where phononic lattices are treated as coupled oscillators connected via massless tethers. The stiffness of the tethers and the mass of the oscillator are varied and their influences on the bandgap formation are deduced. This analysis is reinforced by conducting numerical simulations to examine the modes bounding the bandgap and highlighting the effect of the above parameters. The analysis presented here not only sheds light on the origins of gap formation, but also allows one to define design rules for wide phononic gaps and maximum gap-to-midgap ratios.

36 MATERIALS SCIENCE↗

First measurements of Hiro currents in vertical displacement event in tokamaks

Specially designed tiles were setup in the 2012 campaign of the Experimental Advanced Superconducting Tokamak (EAST), to directly measure the toroidal surface currents during the disruptions. Hiro currents with direction opposite to the plasma currents have been observed, confirming the sign prediction by the Wall Touching Vertical Mode (WTVM) theory and numerical simulations. During the initial phase of the disruption, when the plasma begins to touch the wall, the surface currents can be excited by WTVM along the plasma facing tile surface, varying with the mode magnitude. The currents are not observed in the cases when the plasma moves away from the tile surface. This discovery addresses the importance of the plasma motion into the wall in vertical disruptions. WTVM, acting as a current generator, forces the Hiro currents to flow through the gaps between tiles. This effect, being overlooked so far in disruption analysis, may damage the edges of the tiles and is important for the ITER device.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron reflection in thermionic energy converters

We investigate the impact of electron reflection on space charge in thermionic energy converters. Using the particle-in-cell code Warp3D, we simulate electron reflection and discover that specular and diffuse reflection produce fundamentally distinct behavior. Our simulations suggest that the effects of reflection may have been misidentified in experiments as anomalously large gap sizes. As a result, electron reflection may significantly alter the analysis and optimization of real-world converters.

Lim, Ian T.↗

Phase transformations in oxides above 2000°C: experimental technique development

Here, the oxidation of boride and carbide-based ultra-high-temperature ceramics is the primary limiting factor for their use as aerodynamic surfaces. Understanding the behaviour of the oxides that can result from oxidation of metal borides and carbides at very high temperatures is essential to optimise and tailor the performance of these materials; yet experimental thermodynamic and structural data for refractory oxides above 2000°C are mostly absent. The following techniques that can be applied to fill this gap are discussed: (i) commercial ultra-high-temperature differential thermal analysis for investigation of phase transformations and melting in inert environments to 2500°C, (ii) a combination of laser heating with a splittable nozzle aerodynamic levitator for splat quenching and drop calorimetry from temperatures limited only by sample evaporation, (iii) synchrotron X-ray and neutron diffraction on laser-heated aerodynamically levitated oxide samples for in situ observation of phase transformations in variable atmospheres, refinement of high-temperature structures and thermal expansion. Recent experimental findings include anomalous thermal expansion of the defect fluorite phase of YSZ, thermodynamics of pyrochlore–fluorite transformation from high-temperature structure refinements, and measurement of thermal expansion to the melting temperatures and fusion enthalpies of Zr, Hf, La, Yb and Lu oxides. These methods provide temperatures, enthalpies and volume change for phase transformations above 2000°C, which are required for thermodynamic assessments and calculation of phase diagrams of multicomponent systems.

36 MATERIALS SCIENCE↗

Speeding up software with VecCore

Portable and efficient vectorization is a significant challenge in large software projects such as GeantV, ROOT, and experiments’ frameworks. Nevertheless, fully exploiting SIMD parallelism will be a required step in order to bridge the widening gap between the needs and availability of computing resouces for data analysis and processing in particle physics. Although there are SIMD libraries that wrap compiler intrinsics into a convenient interface, they do not always support all available architectures, or they only perform well in some of them. The VecCore library was created to address some of these performance and portability issues by providing a unified abstraction layer on top of existing libraries, such as Vc or UME::SIMD. In this article, we discuss VecCore’s programming model for SIMD code and some use cases in HEP software packages such as VecGeom and GeantV.

Amadio, G.↗

Origins of electronic bands in the antiferromagnetic topological insulator MnBi 2 Te 4

Despite the rapid progress in understanding the first intrinsic magnetic topological insulator MnBi 2 Te 4 , its electronic structure remains a topic under debates. In this work, we perform a thorough spectroscopic investigation into the electronic structure of MnBi 2 Te 4 via laser-based angle-resolved photoemission spectroscopy. Through quantitative analysis, we estimate an upper bound of 3 meV for the gap size of the topological surface state. Furthermore, our circular dichroism measurements reveal band chiralities for both the topological surface state and quasi-2D bands, which can be well reproduced in a band hybridization model. A numerical simulation of energy-momentum dispersions based on a four-band model with an additional step potential near the surface provides a promising explanation for the origin of the quasi-2D bands. Our study represents a solid step forward in reconciling the existing controversies in the electronic structure of MnBi 2 Te 4 , and provides an important framework to understand the electronic structures of other relevant topological materials MnBi 2n Te 3n+1 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Theory of quasiparticle vortex bound states in iron-based superconductors: Application to scanning tunneling spectroscopy of LiFeAs

The spectroscopy of vortex bound states can provide valuable information on the structure of the superconducting order parameter. Quasiparticle wave functions are expected to leak out in the directions of gap minima or nodes, if they exist, and scanning tunneling spectroscopy (STS) on these low-energy states should probe the momentum dependence of the gap. Anisotropy can also arise from band-structure effects, however. We perform a quasiclassical calculation of the density of states of a single vortex in an anisotropic superconductor, and show that if the gap itself is not highly anisotropic, the Fermi-surface anisotropy can dominate, preventing direct observation of superconducting gap features. Furthermore, this serves as a cautionary message for the analysis of STS data on the vortex state on Fe-based superconductors, in particular, LiFeAs, which we treat explicitly.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Exotic silicon phases synthesized through ultrashort laser-induced microexplosion: Characterization with Raman microspectroscopy

Exotic metastable phases of silicon formed under high pressure are expected to have attractive semiconducting properties including narrow band gaps that open up novel technological applications. Confined microexplosions induced by powerful ultrashort laser pulses have been demonstrated as an advanced tool for the creation of new high-pressure phases that cannot be synthesized by other means. Tightly focused laser pulses are used to generate localized modifications inside the material structure, providing the possibility for precise controlled band-gap engineering. In this study, noninvasive Raman spectroscopy was used for analysis of laser-modified zones in silicon and to determine the metastable high-pressure phases contained. Low laser energies induced the formation of amorphous-only silicon, while higher energies led to crystalline silicon polymorphs within the modifications, albeit under considerable residual stress up to 4.5 GPa. The presence of the structurally similar r8-Si, bc8-Si, and bt8-Si phases is revealed, as well as other yet to be identified phases, and the stacking-related 9R Si polytype is evidenced, presumably stress-induced by the highly compressed laser-modified zone. The ab initio random structure searching approach is used to calculate the Raman signatures and to help identify different Si polymorphs. The findings of this study by Raman spectroscopy from ultrashort laser-induced microexplosion sites may yield insights into the local structure and properties of new silicon metastable phases and the prospect of utilizing exotic phases for extending current applications.

36 MATERIALS SCIENCE↗

A Conceptual Architecture for a Quantum-HPC Middleware

Abstract-Quantum computing promises potential for science and industry by solving certain computationally complex problems faster than classical computers. Quantum computing systems evolved from coupled to classical computing nodes (HPC). With the increasing monolithic systems towards modular architectures comprising multiple quantum processing units (QPUs) scale, middleware systems that facilitate the efficient coupling of quantum-classical computing are becoming critical. Through an in-depth analysis of quantum applications, integration patterns and systems, we identified a gap in understanding Quantum HPC middleware systems. We present a conceptual middleware to facilitate reasoning about quantum-classical integration and serve as the basis for a future middleware system. An essential contribution of this paper lies in leveraging well-established high performance computing abstractions for managing workloads, tasks, and resources to integrate quantum computing into HPC systems seamlessly

97 MATHEMATICS AND COMPUTING↗

Thermo-mechanical characterization of silicone foams

Cellular solids such as elastomeric foams are used in many structural applications to absorb and dissipate energy, due to their light weight (low density) and high energy absorption capability. In this paper we will discuss foams derived from S5370, a silicone foam formulation developed by Dow Corning. In the application presented, the foam is consolidated into a cushion component of constant thickness but variable density. A mechanical material model developed by Lewis (2013), predicts material response, in part, as a function of relative density. To determine the required parameters for this model we have obtained the mechanical response in compression for ambient, cold and hot temperatures. The variable density cushion provided samples sufficient samples so that the effect of sample initial density on the mechanical response could be studied. The mechanical response data showed extreme sensitivity to relative density. We also observed at strains corresponding to 1 MPa a linear relationship between strain and initial density for all temperatures. Samples taken from parts with a history of thermal cycling demonstrated a stiffening response that was a function of temperature, with the trend of more stiffness as temperature increased above ambient. This observation is in agreement with the entropic effects on the thermo-mechanical behavior of silicone polymers. In this study, we present the experimental methods necessary for the development of a material model, the testing protocol, analysis of test data, and a discussion of load (stress) and gap (strain) as a function of sample initial densities and temperatures

36 MATERIALS SCIENCE↗

Development of Seismic Isolation Systems Using Periodic Materials

Advanced fast nuclear power plants and small modular fast reactors are composed of thin-walled structures such as pipes; as a result, they do not have sufficient inherent strength to resist seismic loads. Seismic isolation, therefore, is an effective solution for mitigating earthquake hazards for these types of structures. Base isolation, on which numerous studies have been conducted, is a well-defined structure protection system against earthquakes. In conventional isolators, such as high-damping rubber bearings, lead-rubber bearings, and friction pendulum bearings, large relative displacements occur between upper structures and foundations. Only isolation in a horizontal direction is provided; these features are not desirable for the piping systems. The concept of periodic materials, based on the theory of solid-state physics, can be applied to earthquake engineering. The periodic material is a material that possesses distinct characteristics that prevent waves with certain frequencies from being transmitted through it; therefore, this material can be used in structural foundations to block unwanted seismic waves with certain frequencies. The frequency band of periodic material that can filter out waves is called the band gap, and the structural foundation made of periodic material is referred to as the periodic foundation. The design of a nuclear power plant, therefore, can be unified around the desirable feature of a periodic foundation, while the continuous maintenance of the structure is not needed. In this research project, three different types of periodic foundations were studied: one-dimensional, two-dimensional, and three-dimensional. The basic theories of periodic foundations are introduced first to find the band gaps; then the finite element methods are used, to perform parametric analysis, and obtain attenuation zones; finally, experimental programs are conducted, and the test data are analyzed to verify the theory. This procedure shows that the periodic foundation is a promising and effective way to mitigate structural damage caused by earthquake excitation.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Report on the 4th Marine Energy Instrumentation and Data Workshop

The 4th Marine Energy Instrumentation and Data workshop was held on March 16 - 17 2022. This gathering brought together marine energy (ME) developers, researchers, and stakeholders to discuss the current state of ME technologies and the industry's instrument and data needs. The overall objective of the workshop was to identify gaps facing the ME industry for needed data collection, processing, and analysis. This report contains findings and recommendations derived from the discussions and presentations during the workshop.

16 TIDAL AND WAVE POWER↗

Virtual Power Plant Architecture and Resilient Design

Virtual Power Plants (VPPs) represent a fundamental shift in electric grid operations, aggregating distributed energy resources (DERs) such as solar panels and battery storage to deliver utility-scale grid services traditionally provided by centralized power plants. This report examines the unique architectural, operational, and digital assurance considerations that distinguish VPPs from conventional utility infrastructure as they scale from pilot projects to mainstream deployment across the United States. While VPPs offer significant opportunities for grid modernization and enhanced flexibility, their distributed, multi-stakeholder architecture introduces distinct security challenges that differ fundamentally from traditional generation facilities. The analysis identifies risks in VPP operations, including device-level security gaps, platform vulnerabilities, and communication protocol weaknesses that create expanded attack surfaces compared to centralized power plants. Through examination of real-world incidents and emerging threat patterns, the report demonstrates how some VPPs' reliance on consumer-owned devices, public internet infrastructure, and complex vendor ecosystems require new approaches to digital assurance and operational security. The findings provide practical guidance for utilities, regulators, and aggregators to implement robust security frameworks and operational best practices essential for maintaining grid reliability as VPP deployment accelerates under the Federal Energy Regulatory Commission (FERC) Order 2222 and related regulatory initiatives.

24 - POWER TRANSMISSION AND DISTRIBUTION↗

Application of Mobile Energy Storage for Enhancing Power Grid Resilience: A Review

Natural disasters can lead to large-scale power outages, affecting critical infrastructure and causing social and economic damages. These events are exacerbated by climate change, which increases their frequency and magnitude. Improving power grid resilience can help mitigate the damages caused by these events. Mobile energy storage systems, classified as truck-mounted or towable battery storage systems, have recently been considered to enhance distribution grid resilience by providing localized support to critical loads during an outage. Compared to stationary batteries and other energy storage systems, their mobility provides operational flexibility to support geographically dispersed loads across an outage area. This paper provides a comprehensive and critical review of academic literature on mobile energy storage for power system resilience enhancement. As mobile energy storage is often coupled with mobile emergency generators or electric buses, those technologies are also considered in the review. Allocation of these resources for power grid resilience enhancement requires modeling of both the transportation system constraints and the power grid operational constraints. These aspects are discussed, along with a discussion on the cost–benefit analysis of mobile energy resources. The paper concludes by presenting research gaps, associated challenges, and potential future directions to address these challenges.

24 POWER TRANSMISSION AND DISTRIBUTION↗

EV Charging Through Wireless Power Transfer: Analysis of Efficiency Optimization and Technology Trends

This paper is aimed at reviewing the technology trends for wireless power transfer (WPT) for electric vehicles (EV). It also analyzes the factors affecting its efficiency and describes the techniques currently used for its optimization. The review of the technology trends encompasses both stationary and moving vehicle charging systems. The study of the stationary vehicle charging technology is based on current implementations and on-going developments at WiTricity and Oak Ridge National Lab (ORNL). The moving vehicle charging technology is primarily described through the results achieved by the Korean Advanced Institute of Technology (KAIST) along with on-going efforts at Stanford University. The factors affecting the efficiency are determined through the analysis of the equivalent circuit of magnetic resonant coupling. The air gap between both transmitting and receiving coils along with the magnetic field distribution and the relative impedance mismatch between the related circuits are the primary factors affecting the WPT efficiency. Currently the industry is looking at an air gap of 25 cm or below. To control the magnetic field distribution, Kaist has recently developed the Shaped Magnetic Field In Resonance (SMFIR) technology that uses conveniently shaped ferrite material to provide low reluctance path. The efficiency can be further increased by means of impedance matching. As a result, Delphi's implementation of the WiTricity's technology exhibits a WPT efficiency above 90% for stationary charging while KAIST has demonstrated a maximum efficiency of 83% for moving vehicle with its On Line Vehicle (OLEV) project. This study is restricted to near-field applications (short and mid-range) and does not address long-range technology such as microwave power transfer that has low efficiency as it is based on radiating electromagnetic waves. This paper exemplifies Delphi's work in powertrain electrification as part of its innovation for the real world program geared toward a safer, greener and more connected driving. Moreover, it draws from and adds to Dr. Andrew Brown Jr.'s SAE books 'Active Safety and the Mobility Industry', 'Connectivity and Mobility Industry', and 'Green Technologies and the Mobility Industry'. Magnetic resonant coupling is the foundation of modern wireless power transfer. Its efficiency can be controlled through impedance matching and magnetic field shaping. Current implementations use one or both of these control methods and enable both stationary and mobile charging with typical efficiency within the 80% and 90% range for an air gap up to 25 cm.

25 ENERGY STORAGE↗