Search NASA⌕ Search

SEARCH · Search NASA

Results for “information visualization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

A method for automatically abstracting visual documents

Visual documents--motion sequences on film, videotape, and digital recording--constitute a major source of information for the Space Agency, as well as all other government and private sector entities. This article describes a method for automatically selecting key frames from visual documents. These frames may in turn be used to represent the total image sequence of visual documents in visual libraries, hypermedia systems, and training algorithm reduces 51 minutes of video sequences to 134 frames; a reduction of information in the range of 700:1.

Rorvig, Mark E.↗

Localization Using Visual Odometry and a Single Downward-Pointing Camera

Stereo imaging is a technique commonly employed for vision-based navigation. For such applications, two images are acquired from different vantage points and then compared using transformations to extract depth information. The technique is commonly used in robotics for obstacle avoidance or for Simultaneous Localization And Mapping, (SLAM). Yet, the process requires a number of image processing steps and therefore tends to be CPU-intensive, which limits the real-time data rate and use in power-limited applications. Evaluated here is a technique where a monocular camera is used for vision-based odometry. In this work, an optical flow technique with feature recognition is performed to generate odometry measurements. The visual odometry sensor measurements are intended to be used as control inputs or measurements in a sensor fusion algorithm using low-cost MEMS based inertial sensors to provide improved localization information. Presented here are visual odometry results which demonstrate the challenges associated with using ground-pointing cameras for visual odometry. The focus is for rover-based robotic applications for localization within GPS-denied environments.

Swank, Aaron J.↗

Interactive visual comparison of multimedia data through type-specific views

Analysts who work with collections of multimedia to perform information foraging understand how difficult it is to connect information across diverse sets of mixed media. The wealth of information from blogs, social media, and news sites often can provide actionable intelligence; however, many of the tools used on these sources of content are not capable of multimedia analysis because they only analyze a single media type. As such, analysts are taxed to keep a mental model of the relationships among each of the media types when generating the broader content picture. To address this need, we have developed Canopy, a novel visual analytic tool for analyzing multimedia. Canopy provides insight into the multimedia data relationships by exploiting the linkages found in text, images, and video co-occurring in the same document and across the collection. Canopy connects derived and explicit linkages and relationships through multiple connected visualizations to aid analysts in quickly summarizing, searching, and browsing collected information to explore relationships and align content. In this paper, we will discuss the features and capabilities of the Canopy system and walk through a scenario illustrating how this system might be used in an operational environment. Keywords: Multimedia (Image/Video/Music) Visualization.

Burtner, Edwin R.↗

Research review for information management

The goal of RICIS research in information management is to apply currently available technology to existing problems in information management. Research projects include the following: the Space Business Research Center (SBRC), the Management Information and Decision Support Environment (MIDSE), and the investigation of visual interface technology. Several additional projects issued reports. New projects include the following: (1) the AdaNET project to develop a technology transfer network for software engineering and the Ada programming language; and (2) work on designing a communication system for the Space Station Project Office at JSC. The central aim of all projects is to use information technology to help people work more productively.

Bishop, Peter C.↗

Experience in Visualizing Satellite Data With AR/VR Technologies at NASA's GES-DISC

The Goddard Earth Sciences Data and Information Services Center (GES-DISC) at NASA plays a crucial role in archiving and disseminating vital Earth science data. In this project, we leverage immersive visualization technologies to reshape engagement with and comprehension of the intricate datasets of our planet. Through the adoption of immersive technologies, we are enhancing established methods, offering novel, intuitive experiences in visualizing and interacting with Earth science data. Our goal is to contribute to the ongoing evolution of data interaction, pushing the boundaries of what's possible in data interpretation and education.

Visualization↗

Introductory guide to backgrounds in XPS spectra and their impact on determining peak intensities

Photoelectron and Auger peaks are central to most of the important uses of x-ray photoelectron spectroscopy (XPS), and thus, they receive the most attention in many types of analysis. Quantitative chemical analysis using XPS requires the assessment of the intensities of the photoemission peaks of the elements detected. Determination of peak intensities requires separation of the photoelectron peak signals from the background on which the peaks rest. For the determination of peak area intensities, the background is subtracted from overall signal intensity. The spectral background is also critical when peak fitting is used to determine intensities of overlapping peaks, and the model of background used in this process can impact the results. In addition to the impact on quantitative analysis, information about the depth distribution of elements in the near surface region can often be obtained by visual inspection of the background and quantified using appropriate modeling. Here, this introductory guide provides some basic information about backgrounds in the XPS analysis, describes the types of background models that are commonly used, suggests some of their strengths and weaknesses, and provides examples of their use and misuse. Although the fundamental nature of some components of the background signals in XPS is not understood, indicating that none of the models in use are fully correct and the area is subject to active research, appropriate good practices have been established for most routine analysis. The guide describes good practices, identifies errors that frequently appear in the literature, and uses examples to demonstrate the impacts of background selections on determinations of peak intensities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Path perception during rotation: influence of instructions, depth range, and dot density

How do observers perceive their direction of self-motion when traveling on a straight path while their eyes are rotating? Our previous findings suggest that information from retinal flow and extra-retinal information about eye movements are each sufficient to solve this problem for both perception and active control of self-motion [Vision Res. 40 (2000) 3873; Psych. Sci. 13 (2002) 485]. In this paper, using displays depicting translation with simulated eye rotation, we investigated how task variables such as instructions, depth range, and dot density influenced the visual system's reliance on retinal vs. extra-retinal information for path perception during rotation. We found that path errors were small when observers expected to travel on a straight path or with neutral instructions, but errors increased markedly when observers expected to travel on a curved path. Increasing depth range or dot density did not improve path judgments. We conclude that the expectation of the shape of an upcoming path can influence the interpretation of the ambiguous retinal flow. A large depth range and dense motion parallax are not essential for accurate path perception during rotation, but reference objects and a large field of view appear to improve path judgments.

Space Perception/physiology↗

Visual interface for space and terrestrial analysis

The management of large geophysical and celestial data bases is now, more than ever, the most critical path to timely data analysis. With today's large volume data sets from multiple satellite missions, analysts face the task of defining useful data bases from which data and metadata (information about data) can be extracted readily in a meaningful way. Visualization, following an object-oriented design, is a fundamental method of organizing and handling data. Humans, by nature, easily accept pictorial representations of data. Therefore graphically oriented user interfaces are appealing, as long as they remain simple to produce and use. The Visual Interface for Space and Terrestrial Analysis (VISTA) system, currently under development at the Naval Research Laboratory's Backgrounds Data Center (BDC), has been designed with these goals in mind. Its graphical user interface (GUI) allows the user to perform queries, visualization, and analysis of atmospheric and celestial backgrounds data.

Dombrowski, Edmund G.↗

Immersive Scientific Visualization of Molten-Salt Reactor Waste Characteristics Using Virtual Reality

Immersive visualization is changing how we explore, communicate, and understand complex scientific systems. In nuclear energy, an area in which data are often multidimensional, time-dependent, and difficult to interpret, virtual reality (VR) represents a powerful and intuitive informational medium. This work introduces a VR-based platform that visualizes the post-shutdown behavior and waste management lifecycle of molten-salt reactors (MSRs), a next-generation reactor type with unique operational and safety characteristics. The platform, built in Unity, is streamed on the Meta Quest 3 headset. It transforms high-fidelity simulation data into an interactive, immersive experience. Users can explore time-dependent reactor characteristics such as nuclide decay, which is a key factor for evaluating reactor waste strategies. The datasets were generated using the MOOSE (Multiphysics Object-Oriented Simulation Environment) framework and then processed through ParaView scripting for smooth integration into Unity. From a visualization standpoint, the platform emphasizes spatial storytelling, temporal exploration, and user-centered interaction. Users can navigate 3D reactor geometries, slice through volumetric data, and manipulate time to observe how physical phenomena evolve. Real-scale rendering and embodied interaction make the experience feel tangible. The interface is designed to be accessible, even to those without nuclear or simulation expertise. This lowers the barrier for stakeholders, policymakers, and the general public, while still supporting expert analysis and collaborative decision-making. This work shows how immersive visualization can function as both a scientific tool and a communication interface. By integrating simulation, processing, and visualization into a cohesive workflow, we offer a scalable framework for immersive scientific storytelling. The modular design supports future extensions to other reactor types and lifecycle stages, from shutdown to long-term storage, making the platform adaptable for both research and outreach.

99 - GENERAL AND MISCELLANEOUS↗

Proto-Examples of Data Access and Visualization Components of a Potential Cloud-Based GEOSS-AI System

Once a research or application problem has been identified, one logical next step is to search for available relevant data products. Thus, an early component of a potential GEOSS-AI system, in the continuum between observations and end point research, applications, and decision making, would be one that enables transparent data discovery and access by users. Such a component might be effected via the systems data agents. Presumably, some kind of data cataloging has already been implemented, e.g., in the GEOSS Common Infrastructure (GCI). Both the agents and cataloging could also leverage existing resources external to the system. The system would have some means to accept and integrate user-contributed agents. The need or desirability for some data format internal to the system should be evaluated. Another early component would be one that facilitates browsing visualization of the data, as well as some basic analyses.Three ongoing projects at the NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) provide possible proto-examples of potential data access and visualization components of a cloud-based GEOSS-AI system. 1. Reorganizing data archived as time-step arrays to point-time series (data rods), as well as leveraging the NASA Simple Subset Wizard (SSW), to significantly increase the number of data products available, at multiple NASA data centers, for production as on-the-fly (virtual) data rods. SSWs data discovery is based on OpenSearch. Both pre-generated and virtual data rods are accessible via Web services. 2. Developing Web Feature Services to publish the metadata, and expose the locations, of pre-generated and virtual data rods in the GEOSS Portal and enable direct access of the data via Web services. SSW is also leveraged to increase the availability of both NASA and non-NASA data.3.Federating NASA Giovanni (Geospatial Interactive Online Visualization and Analysis Interface), for multi-sensor data exploration, that would allow each cooperating data center, currently the NASA Distributed Active Archive Centers (DAACs), to configure its own Giovanni deployment, while also allowing all the deployments to incorporate each others data. A federated Giovanni comprises Giovanni Virtual Machines, which can be run on local servers or in the cloud.

access↗

Data Integrity Challenges in NASA Giovanni

The Geospatial Interactive Online Visualization ANd aNalysis Infrastructure (Giovanni) is an online tool developed by the NASA Goddard Earth Sciences (GES) Data and Information Services Center (DISC), one of 12 NASA Science Mission Directorate Data Centers (DAACs) to analyze and visualize NASA remote sensing and model data without downloading data and software. As of this writing, over 2000 Earth satellite and model variables are available in Giovanni, including several well-known NASA satellite missions (e.g., TRMM, GPM) and projects (e.g., MERRA-2, GPCP). There are twenty-two plots provided by Giovanni that can be used to analyze, compare, and explore Earth data across disciplines. Results can be shared with colleagues and downloaded for further analysis. Giovanni has helped publish over 3000 referral papers over the years. As open science policies roll in, data integrity has become a major challenge for Giovanni and other tools. For integrity, both data and workflows must be transparent. FAIR-compliant data, including input, intermediate, and result products, as well as their associated statistics, metadata, and information, are needed. The NASA Data Product Development Guide for Data Producers provides a key resource on how to develop FAIR-compliant data products. Data quality information is also needed from data producers and analysis services like Giovanni. The workflow part is quite challenging and requires workflow management improvements, such as recording workflows and making them available to users. In this presentation, we will discuss the data integrity challenges in Giovanni.

data analysis, visualization↗

Visualizing turbulent mixing of gases and particles

A physical model and interactive computer graphics techniques have been developed for the visualization of the basic physical process of stochastic dispersion and mixing from steady-state CFD calculations. The mixing of massless particles and inertial particles is visualized by transforming the vector field from a traditionally Eulerian reference frame into a Lagrangian reference frame. Groups of particles are traced through the vector field for the mean path as well as their statistical dispersion about the mean position by using added scalar information about the root mean square value of the vector field and its Lagrangian time scale. In this way, clouds of particles in a turbulent environment are traced, not just mean paths. In combustion simulations of many industrial processes, good mixing is required to achieve a sufficient degree of combustion efficiency. The ability to visualize this multiphase mixing can not only help identify poor mixing but also explain the mechanism for poor mixing. The information gained from the visualization can be used to improve the overall combustion efficiency in utility boilers or propulsion devices. We have used this technique to visualize steady-state simulations of the combustion performance in several furnace designs.

Ma, Kwan-Liu↗

Envision: An interactive system for the management and visualization of large geophysical data sets

Envision is a software project at the University of Illinois and Texas A&M, funded by NASA's Applied Information Systems Research Project. It provides researchers in the geophysical sciences convenient ways to manage, browse, and visualize large observed or model data sets. Envision integrates data management, analysis, and visualization of geophysical data in an interactive environment. It employs commonly used standards in data formats, operating systems, networking, and graphics. It also attempts, wherever possible, to integrate with existing scientific visualization and analysis software. Envision has an easy-to-use graphical interface, distributed process components, and an extensible design. It is a public domain package, freely available to the scientific community.

Searight, K. R.↗

"Giovanni at 20: Consistency and Persistency in Making Earth Remote Sensing Data Available (and Useful) to the Earth Science Community"

Since its creation in the year 2000, the NASA Geospatial Interactive Online Visualization ANd aNalysis Infrastructure (Giovanni) has been an exemplar of how to provide remotely-sensed satellite data and related Earth science datasets to a broad and globally diverse researcher community. One of the hallmarks of Giovanni system usage is that it is common to see practitioners of many branches of science – particularly those in fields not traditionally associated with remote-sensing data, such as animal behavior and paleooceanography – both accessing and employing datasets which the system provides. This usage pattern is attested to by the diversity of published science citing Giovanni. Giovanni has evolved through several versions, each of which increased analytical and visualization options while also enhancing ease-of-use. Information resources supporting Giovanni from the Goddard Earth Sciences Data and Information Services Center (GES DISC), which hosts the system, start with basic mapping and plotting functions and extend to “How-to” recipes demonstrating interusability with other data analysis systems and software. Giovanni is now being developed for use in a cloud environment, potentially expanding datasets the system can be applied to, and also improving performance for data having high spatial and temporal resolution. This presentation covers the system’s historical success with interesting examples of Giovanni-citing research, and will apply its current capabilities to a multi-dataset examination of derecho events associated with mesoscale convective phenomena in the summer of 2020, indicating how Giovanni is prepared for ongoing support of Earth science in a changing world.

Giovanni Derecho visualization↗

Deactivation and decommissioning web log analysis using big data technology - 15710

The D and D Knowledge Management Information Tool (D and D KM- IT) is a web-based knowledge management information tool built for the D and D user community. Big data is a massive volume of structured and unstructured datasets which is so large that it's difficult to process using traditional database techniques. Web logs are the repository of files which are generated automatically for any operation on the web site. Web log files generated from the D and D KM-IT will be processed using the Apache Hadoop Framework to extract meaningful data. Hadoop is an open-source software framework for storing and processing big data in a distributed environment on large clusters of commodity hardware. Hadoop framework consists of two main layers: Hadoop distributed file system (HDFS) and the Execution engine (MapReduce). Automatic parallelization and distribution; clean and simple programming abstraction. Implementation: Web log files from the D and D KM-IT server are fetched using Apache Flume and loaded into the Hadoop distributed file system. Using the Apache Hcatalog tool, the web log data is parsed and converted into a structured table format. A Pig program is developed to query the tables to retrieve and store the significant information onto the HDFS. The extracted data is fed to business visualization tools such as Microsoft Excel for analysis and reporting. Results The reports generated through the web log data processing will be analyzed to improve the usability and performance of the D and D KM-IT. Conclusion/Future Work: User keyword information can be explored to add new trending topics to the D and D KM-IT application. Statistics generated can be compared to analysis reports from existing analytical tools.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Remote Visualization and Remote Collaboration On Computational Fluid Dynamics

A new technology has been developed for remote visualization that provides remote, 3D, high resolution, dynamic, interactive viewing of scientific data (such as fluid dynamics simulations or measurements). Based on this technology, some World Wide Web sites on the Internet are providing fluid dynamics data for educational or testing purposes. This technology is also being used for remote collaboration in joint university, industry, and NASA projects in computational fluid dynamics and wind tunnel testing. Previously, remote visualization of dynamic data was done using video format (transmitting pixel information) such as video conferencing or MPEG movies on the Internet. The concept for this new technology is to send the raw data (e.g., grids, vectors, and scalars) along with viewing scripts over the Internet and have the pixels generated by a visualization tool running on the viewer's local workstation. The visualization tool that is currently used is FAST (Flow Analysis Software Toolkit).

Watson, Val↗

Bringing "Scientific Expeditions" Into the Schools

Two new technologies, the FASTexpedition and Remote FAST, have been developed that provide remote, 3D, high resolution, dynamic, interactive viewing of scientific data (such as simulations or measurements of fluid dynamics). The FASTexpedition permits one to access scientific data from the World Wide Web, take guided expeditions through the data, and continue with self controlled expeditions through the data. Remote FAST permits collaborators at remote sites to simultaneously view an analysis of scientific data being controlled by one of the collaborators. Control can be transferred between sites. These technologies are now being used for remote collaboration in joint university, industry, and NASA projects in computational fluid dynamics (CFD) and wind tunnel testing. Also, NASA Ames Research Center has initiated a project to make scientific data and guided expeditions through the data available as FASTexpeditions on the World Wide Web for educational purposes. Previously, remote visualiZation of dynamic data was done using video format (transmitting pixel information) such as video conferencing or MPEG movies on the Internet. The concept for this new technology is to send the raw data (e.g., grids, vectors, and scalars) along with viewing scripts over the Internet and have the pixels generated by a visualization tool running on the viewer's local workstation. The visualization tool that is currently used is FAST (Flow Analysis Software Toolkit). The advantages of this new technology over using video format are: 1. The visual is much higher in resolution (1280xl024 pixels with 24 bits of color) than typical video format transmitted over the network. 2. The form of the visualization can be controlled interactively (because the viewer is interactively controlling the visualization tool running on his workstation). 3. A rich variety of guided expeditions through the data can be included easily. 4. A capability is provided for other sites to see a visual analysis of one site as the analysis is interactively performed. Control of the analysis can be passed from site to site. 5. The scenes can be viewed in 3D using stereo vision. 6. The network bandwidth used for the visualization using this new technology is much smaller than when using video format. (The measured peak bandwidth used was 1 Kbit/sec whereas the measured bandwidth for a small video picture was 500 Kbits/sec.)

Watson, Val↗

Exploratory Visual Analysis of Anomalous Runtime Behavior in Streaming High Performance Computing Applications

Online analysis of runtime behavior is essential for performance tuning in streaming scientific workflows. Integration of anomaly detection and visualization is necessary to support human-centered analysis, such as verification of candidate anomalies utilizing domain knowledge. In this work, we propose an efficient and scalable visual analytics system for online performance analysis of scientific workflows toward the exascale scenario. Here, our approach uses a call stack tree representation to encode the structural and temporal information of the function executions. Based on the call stack tree features (e.g., execution time of the root function or vector representation of the tree structure), we employ online anomaly detection approaches to identify candidate anomalous function executions. We also present a set of visualization tools for verification and exploration in a level-of-detailed manner. General information, such as distribution of execution times, are provided in an overview visualization. The detailed structure (e.g., function invocation relations) and the temporal information (e.g., message communication) of the execution call stack of interest are also visualized. The usability and efficiency of our methods are verified in a real-world HPC application.

97 MATHEMATICS AND COMPUTING↗