Search NASA⌕ Search

SEARCH · Search NASA

Results for “initial state”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

A pilot study on the feasibility of European harmonized human biomonitoring: Strategies towards a common approach, challenges and opportunities

In 2004 the European Commission and Member States initiated activities towards a harmonized approach for Human Biomonitoring surveys throughout Europe. The main objective was to sustain environmental health policy by building a coherent and sustainable framework and by increasing the comparability of data across countries. A pilot study to test common guidelines for setting up surveys was considered a key step in this process. Through a bottom-up approach that included all stakeholders, a joint study protocol was elaborated. From September 2011 till February 2012, 17 European countries collected data from 1844 mother–child pairs in the frame of DEMOnstration of a study to COordinate and Perform Human Biomonitoring on a European Scale (DEMOCOPHES). Mercury in hair and urinary cadmium and cotinine were selected as biomarkers of exposure covered by sufficient analytical experience. Phthalate metabolites and Bisphenol A in urine were added to take into account increasing public and political awareness for emerging types of contaminants and to test less advanced markers/markers covered by less analytical experience. Extensive efforts towards chemo-analytical comparability were included. The pilot study showed that common approaches can be found in a context of considerable differences with respect to experience and expertize, socio-cultural background, economic situation and national priorities. It also evidenced that comparable Human Biomonitoring results can be obtained in such context. A European network was built, exchanging information, expertize and experiences, and providing training on all aspects of a survey. A key challenge was finding the right balance between a rigid structure allowing maximal comparability and a flexible approach increasing feasibility and capacity building. Next steps in European harmonization in Human Biomonitoring surveys include the establishment of a joint process for prioritization of substances to cover and biomarkers to develop, linking biomonitoring surveys with health examination surveys and with research, and coping with the diverse implementations of EU regulations and international guidelines with respect to ethics and privacy. - Highlights: • A common European Human Biomonitoring (HBM) survey protocol was developed through a bottom-up approach. • A joint process for prioritization was established to select a limited set of biomarkers, some covered by experience and others for emerging substances. • The protocol was tested in a pilot study, resulting in HBM results comparable on a European scale which sustained environmental health policy. • Ethics and privacy regulations were not an obstacle for transnational harmonization.

54 ENVIRONMENTAL SCIENCES↗

An anomalous structure disordering in Zr–Cu–Ag supercooled glass-forming liquids

An anomalous ordering-to-disordering transition in a Zr–Cu–Ag supercooled glass-forming liquid has been revealed by in situ high-energy x-ray diffraction. Upon heating, the supercooled liquid exhibits a structural crossover at T c = 716 K, evident by the change in statistical characteristics of the first sharp diffraction peak. When annealed in the vicinity of T c , the supercooled liquid first relaxes from its initial state to a denser and more ordered state. Subsequently, it becomes disordered at the medium-range scale with a slowing down of densification, as demonstrated by the broadening of the first sharp diffraction peak and a decrease in the peak intensities of the higher atomic shells in the reduced pair distribution function. Finally, a scenario for the evolution of less correlated locally favored clusters in the liquid–liquid phase transition is discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A retrodictive stochastic simulation algorithm

In this paper we describe a simple method for inferring the initial states of systems evolving stochastically according to master equations, given knowledge of the final states. This is achieved through the use of a retrodictive stochastic simulation algorithm which complements the usual predictive stochastic simulation approach. We demonstrate the utility of this new algorithm by applying it to example problems, including the derivation of likely ancestral states of a gene sequence given a Markovian model of genetic mutation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Galerkin method for unsplit 3-D Dirac equation using atomically/kinetically balanced B-spline basis

A Galerkin method is developed to solve the time-dependent Dirac equation in prolate spheroidal coordinates for an electron–molecular two-center system. The initial state is evaluated from a variational principle using a kinetic/atomic balanced basis, which allows for an efficient and accurate determination of the Dirac spectrum and eigenfunctions. B-spline basis functions are used to obtain high accuracy. This numerical method is used to compute the energy spectrum of the two-center problem and then the evolution of eigenstate wavefunctions in an external electromagnetic field.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Suhl instabilities in nanoscopic spheroids

We simulate the magnetization dynamics of a permalloy spheroid of nanoscopic size in zero external field, such that both dipolar and exchange interactions are important. Low excitation power is used to obtain the frequencies and mode patterns of many normal modes. At higher power, non-linear three and four mode couplings between magnons carrying orbital angular momentum are observed to give rise to Suhl instabilities. Suhl’s analysis of the selection rules governing the allowed processes is extended to initial states other than uniform precession. These rules are studied and confirmed by the simulations. Both down- and up-conversion are seen as well as three and four-mode processes. As a result, general trends are inferred for preferred instabilities among those that are allowed, although the thresholds for some instabilities appear to be very high.

3D nanomagnetism↗

Aligning lithium metal battery research and development across academia and industry

Successful integration of metallic lithium anodes into secondary batteries could enhance energy density and enable new forms of electrified transportation. However, the outlook for widespread lithium metal adoption in energy storage devices remains mixed. This comes in part from existing gaps in our understanding of the relationships connecting the initial state of lithium, its evolution with cycling, and end-of-life state. It remains important to develop standardized protocols for material and cell characterization, cycling performance, safety, and recycling procedures for lithium metal-based batteries. In February 2023 a cohort of scientists and engineers from academia, national laboratories, and industry gathered to converge on a list of critical challenges and action items to provide better understanding of lithium metal evolution and to enhance academic, governmental, and industrial partnerships to address these challenges. Here, we highlight the major discussion topics revolving around the manufacturing of lithium metal, its related metrology and integration into battery form factors, and best practices testing its electrochemical performance relevant to automotive applications. We introduce a power-controlled discharge testing protocol for research and development cells, in alignment between major automotive stakeholders, that may reveal lithium metal battery dynamics closer to practical driving behavior.

25 ENERGY STORAGE↗

Incubational domain characterization in lightly doped ceria

Microstructures of both Gd- and Y-doped ceria with different doping level (i.e., 10 at% and 25 at%) have been comprehensively characterized by means of high resolution transmission electron microscopy and selected area electron diffraction. Coherent nano-sized domains can be widely observed in heavily doped ceria. Nevertheless, it was found that a large amount of dislocations actually exist in lightly doped ceria instead of heavily doped ones. Furthermore, incubational domains can be detected in lightly doped ceria, with dislocations located at the interfaces. The interactions between such linear dislocations and dopant defects have been simulated accordingly. As a consequence, the formation mechanism of incubational domains is rationalized in terms of the interaction between intrinsic dislocations of doped ceria and dopant defects. This study offers the insights into the initial state and related mechanism of the formation of nano-sized domains, which have been widely observed in heavily rare-earth-doped ceria in recent years. - Graphical abstract: Interactions between dislocations and dopants lead to incubational domain formation in lightly doped ceria. Highlights: Black-Right-Pointing-Pointer Microstructures were characterized in both heavily and light Gd-/Y-doped ceria. Black-Right-Pointing-Pointer Dislocations are existed in lightly doped ceria rather than heavily doped one. Black-Right-Pointing-Pointer Interactions between dislocations and dopant defects were simulated. Black-Right-Pointing-Pointer Formation of dislocation associated incubational domain is rationalized.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pore habit of methane hydrate and its evolution in sediment matrix – Laboratory visualization with phase-contrast micro-CT

Describing the pore habit of methane hydrate in sediment matrices is essential for understanding natural distribution of methane hydrate, methane trace (transport and solidification) in the hydrate stability zone, physical properties of hydrate-bearing sediments, and the associated influence on potential gas production. Pore habit visualization in natural media at pore scale even with laboratory synthesized cores has been challenging due to the similar densities of methane hydrate from pore liquid. In this work, we used phase-contrast assisted micro-CT with potassium iodine-doped brine to visualize four phases: sand particles, pore fluid, methane hydrate and methane gas. This study visualizes the pore habit of methane hydrate at various stages including during hydrate formation in excess-gas systems, its evolution after brine injection to replace pore fluid, and hydrate formation in excess-water systems. Hydrate tends to adopt round and smooth surfaces when in contact with water while exhibits relatively angular interfaces when in contact with methane gas. Hydrate formation in excess-gas systems results in a partial cementing and partial mineral-coating pore habit, while hydrate in excess-water systems develops mainly as pore-filling, and locally cementing or mineral-coating where big gas pockets exist at the initial state. Pore liquid replacement from methane gas to brine triggers a shift of hydrate pore habit towards pore-filling. Methane hydrate evolution over time produces bigger hydrate particles but with less contact area with sand particles. The effects of hydrate pore habit become less important as hydrate particle size exceeds the pore size. Additionally, hydrate formation could trap residual methane gas and brine as inclusions.

58 GEOSCIENCES↗

Microstructure evolution and mechanical behavior of a high strength dual-phase steel under monotonic loading

Transmission electron microscopy (TEM) microstructures of a high-strength dual-phase steel DP800 have been examined after moderate plastic deformations in simple shear and uniaxial tension. Special attention has been paid to the effect of the intergranular hard phase (martensite) on the microstructure evolution in the near-grain boundary regions. Quantitative parameters of dislocation patterning have been determined and compared with the similar characteristics of previously examined single-phase steels. The dislocation patterning in the interiors of the ferrite grains in DP800 steel is found to be similar to that already observed in the single-phase IF (Interstitial Free) steel whereas the martensite-affected zones present a delay in patterning and display very high gradients of continuous (gradual) disorientations associated with local internal stresses. The above stresses are shown to control the work-hardening of dual-phase materials at moderate strains for monotonic loading and are assumed to influence their microstructure evolution and mechanical behavior under strain-path changes. - Highlights: • The microstructure evolution has been studied by TEM in a DP800 steel. • It is influenced by both martensite and dislocations in the initial state. • The DP800 steel presents a high work-hardening rate due to internal stresses.

36 MATERIALS SCIENCE↗

Influence of severe plastic deformation on intermetallic particles in Mg-12 wt.%Zn alloy investigated using transmission electron microscopy

The in-depth microstructural characterization of intermetallic particles in an Mg-12 wt.%Zn binary alloy subjected to a severe plastic deformation is presented. The alloy was processed by four passes via equal channel angular pressing with an applied back pressure at a gradually decreasing temperature and analyzed using transmission electron microscopy techniques to observe the influence of processing on intermetallic particles. The results are compared with the initial state of the material prior to severe plastic deformation. The microstructural evolution of the α-Mg matrix and the Mg{sub 21}Zn{sub 25}, Mg{sub 51}Zn{sub 20} and MgZn{sub 2} was analyzed using bright field imaging, selected area electron diffraction, high-resolution transmission electron microscopy and high-angle annular dark field imaging in scanning mode. The plastic deformation process influenced the α-Mg matrix and each type of intermetallic particle. The α-Mg matrix consisted of two types of areas. The first type of area had a highly deformed structure, and the second type of area had a partially recrystallized structure with an average grain size of approximately 250 nm. The Mg{sub 21}Zn{sub 25} microparticles exhibited distinct forms in the α-Mg matrix that were characterized as a single-crystalline form, a nano-crystalline form and a broken up form. No evidence of Mg{sub 51}Zn{sub 20} nanoparticles within the α-Mg matrix was found in the microstructure, which indicates their dissolution or phase transformation during the deformation process. MgZn{sub 2} nanoparticles exhibited different behavior in both types of α-Mg matrix. Two orientation relationships toward the highly deformed α-Mg matrix were observed; however, there was no relationship toward the partially recrystallized α-Mg matrix. Additionally, the growth of the MgZn{sub 2} nanoparticles was different in the two types of α-Mg matrix. The Mg{sub 51}Zn{sub 20} nanoparticles inside Mg{sub 21}Zn{sub 25} microparticles exhibited a distinct behavior within the single-crystalline or nano-crystalline form of the parent Mg{sub 21}Zn{sub 25} microparticles. The Mg{sub 21}Zn{sub 25} + Mg{sub 51}Zn{sub 20} eutectic compound was confirmed for both forms of the parent Mg{sub 21}Zn{sub 25} microparticles, and the growth of Mg{sub 51}Zn{sub 20} nanoparticles is discussed. - Highlights: •Comprehensive microstructure characterization of Mg-12 wt.%Zn alloy after ECAP-BP •TEM analysis of changes of intermetallic phases caused by SPD •Mg{sub 21}Zn{sub 25} particles exhibit nano-crystalline regions with grain size below 100 nm. •MgZn{sub 2} preserved its orientation relationship toward highly deformed α-Mg after SPD. •Existence of Mg{sub 21}Zn{sub 25} + Mg{sub 51}Zn{sub 20} eutectic remained for each Mg{sub 21}Zn{sub 25} particle form.

36 MATERIALS SCIENCE↗

Influence of surface pattern on the biological properties of Ti grade 2

Highlights: • Laser modification causes changes in chemical composition of the surface. • Laser treatment creates roughness in a range from nano- to micrometers. • The surface modification presented results in a multimodal topography. • A hierarchical topography promotes protein adsorption. - Abstract: This paper presents a detailed characterization of Ti surface geometries as produced by non-contact laser functionalization and its impact on the process of protein adsorption. The proposed surface modification is designed for the local treatment of implantable devices with original roughness. In this work, titanium plates were initially modified by the two most common mechano-chemical treatments, shot peening and acid etching. The material under study was next functionalized DLIL (Direct Laser Interference Lithography) in order to obtained two different surface patterns: grooves and islands. The modified surfaces were characterized in terms of their shape, roughness, wettability, surface energy and chemical composition. For this purpose, the following methods were used: scanning electron microscopy, optical profilometry, atomic force microscopy, contact angle measurements, and X-ray photoelectron spectroscopy. Protein adsorption tests were conducted to consider the potential of the proposed methodology in biomedical applications and to compare the influence of the two different surface patterns on the initial state of ossointegration. To this end, XPS and FTIR studies were conducted. The systematic analysis presented will be useful when selecting an appropriate surface geometry for the local surface functionalization of implantable devices.

36 MATERIALS SCIENCE↗

Alkene adsorption and cracking on acidic zeolites – A gradual process of understanding

Cracking of light alkenes on solid acids and, in particular on zeolites, is ubiquitous in refineries. Different zeolite framework topologies in the catalysts used provide spatial constraints for reactants and products, leading to discrete reaction routes and varying selectivities. The conversion of alkenes in cracking proceeds either via monomolecular or bimolecular reaction pathways. In both routes, the reacting alkene adsorbs first on Brønsted acid sites forming the initial state (e.g., π-complex, carbenium ion or alkoxide), followed by β-cleavage in the carbenium transition state, generating a smaller alkene and a carbenium ion (monomolecular route) or forming a dimer by alkene addition that cracks subsequently (bimolecular route). The current state of understanding alkene sorption and cracking is critically discussed in this paper and four questions are formulated that may be the central questions from our perspective in further developing new generations of catalysts and processes for alkene conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Three-dimensional Culture Conditions Lead to Decreased Radiation Induced Crytoxicity in Human Mammary Epithelial Cells

For both targeted and non-targeted exposures, the cellular responses to ionizing radiation have predominantly been measured in two dimensional monolayer cultures. Although convenient for biochemical analysis, the true interactions in vivo depend upon complex interactions between cells themselves and the surrounding extra cellular matrix. This study directly compares the influence of culture conditions on radiation induced cytotoxicity following exposure to low-LET ionizing radiation. Using a three dimensional (3D) human mammary epithelial tissue model, we have found a protective effect of 3D cell culture on cell survival after irradiation. The initial state of the cells (i.e., 2D vs. 3D culture) at the time of irradiation does not alter survival, nor does the presence of extracellular matrix during and after exposure to dose, but long term culture in 3D which offers significant reduction in cytotoxicity at a given dose (e.g. ~4 fold increased survival at 5 Gy). The cell cycle delay induced following exposure to 2 and 5 Gy was almost identical between 2D and 3D culture conditions and cannot account for the observed differences in radiation responses. However the amount of apoptosis following radiation exposure is significantly decreased in 3D culture relative to the 2D monolayer after the same dose. A likely mechanism of the cytoprotective effect afforded by 3D culture conditions is the down regulation of radiation induced apoptosis in 3D structures

59 BASIC BIOLOGICAL SCIENCES↗

Track finding efficiency in

We describe several studies to measure the charged track reconstruction efficiency and asymmetry of the BaBar detector. The first two studies measure the tracking efficiency of a charged particle using τ and initial state radiation decays. The third uses the τ decays to study the asymmetry in tracking, the fourth measures the tracking efficiency for low momentum tracks, and the last measures the reconstruction efficiency of K$0\atop{S}$ particles. The first section also examines the stability of the measurements vs. BaBar running periods.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Initial conditions for hydrodynamics from kinetic theory equilibration

Here we use effective kinetic theory to study the pre-equilibrium dynamics in heavy-ion collisions. We describe the evolution of linearized energy perturbations on top of out-of-equilibrium background to the energy-momentum tensor at a time when hydrodynamics becomes applicable. We apply this description to IP-Glasma initial conditions and find an overall smooth transition to hydrodynamics. In a phenomenologically favorable range of η/s values, early time dynamics can be accurately described in terms of a few functions of a scaled time variable τT/(η/s). Our framework can be readily applied to other initial state models to provide the pre-equilibrium dynamics of the energy momentum tensor.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The STAR BES-II and Forward Rapidity Physics and Upgrades

The second phase of the Beam Energy Scan at RHIC, BES-II, is scheduled to start in 2019 and will explore with precision measurements the high baryon density region of the QCD phase diagram. The detector upgrades will enhance some of the key measurements by extending STAR’s kinematical reach. Examples are the kurtosis of net-protons, which could pinpoint the position of a critical point. The upgrades currently under way comprise: the replacement of the inner TPC sectors, the Event Plane Detector and the end-cap TOF. Building on these upgrades STAR is planning to further enhance its detector capabilities by installing a Forward Calorimeter System integrating an electromagnetic and hadronic calorimeter and a Forward Tracking System combining 3 Silicon mini-strip disks and 4 Small-Strip Thin Gap Chamber (sTGC) wheels. The forward upgrade is motivated by studying the initial state of nucleons and nuclei and the exploration of cold QCD physics in the very high and low regions of x. This proceeding will highlight these upgrades and some of their selected physics opportunities.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗