Search NASA⌕ Search

SEARCH · Search NASA

Results for “interval analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Assessment of Tritium Activities in Bailed versus Pumped Samples from Wells at the Nevada National Security Site

The Underground Test Area (UGTA) Activity uses a variety of methods to collect groundwater samples to identify radionuclide migration from underground nuclear tests. These include depth-discrete bailing, pumping with low-volume rod pumps, and pumping with electrical submersible pumps. The Nevada National Security Site (NNSS) Integrated Groundwater Sampling Plan specifies that when sampling with a pump, a minimum of three effective well volumes are withdrawn and then samples are collected after water-quality parameters have stabilized. In locations where pumping is not feasible, depth-discrete bailing is used and purging prior to sampling is usually not required. A recent study evaluated three sampling technologies and recommended that historical tritium results be evaluated where both pumped and bailed samples are available to identify preferred sampling protocols for the collection of tritium samples. The tritium ( 3 H) activities were obtained from the UGTA chemistry data base. Wells were identified with known 3 H activities above method detection limits, and then evaluated if both bailed and pumped samples had been collected. Twenty two wells and piezometers with bailed samples, pumped samples, and 3 H activities above background were identified for further consideration. The conclusions from this analysis are: Bailed samples collected for 3 H analysis near the water surface in a well are lower in 3 H activity than bailed samples from within screened intervals and pumped samples. Depth-discrete bailed samples from within the screened intervals are generally in good agreement with pumped samples from developed wells and piezometers. Depth-discrete bailed samples from undeveloped wells and piezometers are in good agreement with the first pumped samples. However, the next pumped samples increased in 3 H activity, resulting in a greater percent difference between the undeveloped bailed samples and later pumped samples. Continuous pumping over extended periods removing large purge volumes from wells can perturbate the surrounding groundwater system for long periods of time. These perturbations can cause large changes in 3 H activities in the aquifer near the well because of the mixing of groundwater with variable 3 H activities. Recommendations include: Bailed samples for 3 H should not be collected near the water surface in the well. Bailed samples should be collected from within the well screen. Logs of temperature, chemistry, and thermal flow should be evaluated to identify optimal depths within the well screen to collect depth-discrete bailer samples. Purging of large volumes of water from the well over extended periods of time should be avoided when collecting 3 H samples. Sufficient time should be allowed after pumping large volumes of water from the well (e.g., after well development) for the surrounding aquifer and 3 H activities to return to ambient conditions

54 ENVIRONMENTAL SCIENCES↗

Fatigue failure of materials under broad band random vibrations

The fatigue life of material under multifactor influence of broad band random excitations has been investigated. Parameters which affect the fatigue life are postulated to be peak stress, variance of stress and the natural frequency of the system. Experimental data were processed by the hybrid computer. Based on the experimental results and regression analysis a best predicting model has been found. All values of the experimental fatigue lives are within the 95% confidence intervals of the predicting equation.

Huang, T. C.↗

Dependence of field-aligned electron precipitation occurrence on season and altitude

An examination of factors affecting the occurrence of field-aligned 2.3-keV electron precipitation has been performed by using data from more than 7500 orbits of the polar-orbiting satellite Ogo 4. Both season and altitude were found to be parameters that are directly related to the probability of occurrence. The highest probabilities occurred when the measurements were made at altitudes from 800 km to apogee (914 km), except during summer. In this altitude interval, the electron precipitation was more likely to be field-aligned during winter than during any other season. The analysis suggests the establishment by electrostatic charge layers of localized electric fields parallel to the magnetic field. The resulting potential distribution focuses the electron beam along the field lines in the region between the charge layers but destroys the focused beam below the lower layer, and thus an altitude dependence is created.

Berko, F. W.↗

Modulation of the Jovian emission below 8 MHz

RAE-1 data on Jovian decametric emission between 1 and 8 MHz are analyzed to investigate modulation of the emission with respect to the rotation phase of the planet and Io phase as well as a possible variation with flux density of the rotation-phase and Io-phase control below 8 MHz. Attention is given to the observing interval, identification of Jovian emission, orbital-phase constraint, and calculated emission occurrence probabilities. Five frequencies are selected for the analysis (6550, 4700, 3930, 2200, and 1310 kHz), and System III coordinates are used to illustrate the rotation-phase behavior. The spectral distribution of peak flux density is examined along with the overall occurrence probability, the individual modulations, theoretical implications of invariance of active Io phases, and possible modulation by Europa. The results show that Io exerts a suprisingly high degree of control at the low frequencies, that rotation-phase control is only marginal, and that the manner in which Io control is found to vary with flux density is consistent with previous findings at higher frequencies.

Desch, M. D.↗

Laser modulation of optical absorption in ZnSe

The possibility of producing and detecting laser induced modulation of absorption (LIMA) in ZnSe crystals using a moderate laser intensity of about 6 mw output was investigated. The modulation is smaller than that previously obtained with higher laser photon flux, but is not too difficult to detect. Modulation of the order of a few parts in 10 to the 5th power, up to one part in 10 to the 4th power appears typical at the present. LIMA pulse shapes were recorded with varying system resolutions at a half dozen wavelengths in the visible, from 4800 A to 6000 A. Detailed data were taken, particularly at 5000 A, for a range of time intervals following laser pulse turn-on. Quantitative study of the excitation and decay kinetics of these is underway, though analysis is not complete. Major features are discussed with attention centered upon the detailed measurements made most recently at 5000 A.

Major, R. W.↗

HEAO 1 high-energy X-ray observations of Centaurus X-3

Pulsations of 4.8 sec were detected up to energies above 38 keV by the present High Energy X-ray and Low Energy Gamma-Ray HEAO 1 satellite experiment observations of Cen X-3, and an analysis of the X-ray spectrum as a function of pulse phase indicates that the spectrum hardens during an interval of about 1.2 sec which lags the pulse peak by about 0.6 sec. The results of correlated observations of pulse period and X-ray intensity include (1) the detection of a high intensity state during which the pulse period is on the average increasing, (2) the measurement of comparable high intensities during episodes of both period increase and decrease, (3) the detection of X-ray pulsations at a much reduced level during a period of low intensity, and (4) the detection of a transition between spin-down, and spin-up episodes that coincides with a rapid decrease in X-ray intensity.

Howe, S. K.↗

Quasi-stagnant plasmoid in the middle tail - A new preexpansion phase phenomenon

From the analysis of ISEE 3 data it is found that a plasmoid is sometimes formed in the middle tail outside the intervals of the substorm expansion phase. This plasmoid is produced by reconnection at the X-type neutral line, which is located earthward of the distant neutral line but beyond the substorm-associated near-tail neutral line, and it is almost stagnant in that the associated flow speed is less than 300 km/s. The blocking effect of the distant neutral line is the most probable reason for the slow movement. The quasi-stagnant plasmoid is observed at x = -60 to - 100 earth radii for a duration of a few tens of minutes, and in about one half of the cases it is followed by the fast tailward streaming. The onset of this streaming tends to coincide with the onset of the substorm expansion phase, and this probably occurs when the reconnection at the middle-tail neutral line comes close to processing the last closed field line. Intensification of the dawn-to-dusk electric field that causes the mantle plasma to reach the plasma sheet boundary closer to the earth is suggested as the reason for the formation of the middle-tail neutral line earthward of the distant neutral line. The effects on the energetic particle flux and relation to the near-tail reconnection are also discussed.

Nishida, A.↗

Analysis of lightning field changes during active Florida thunderstorms

A computer algorithm for deriving accurate values of lightning-caused changes in cloud electric fields under active storm conditions was developed and applied to data obtained during two thunderstorms from a network of ground-based electric field mills at the NASA Kennedy Space Center and the Cape Canaveral Air Force Station. The resulting field changes were analyzed using a least-squares optimization procedure and point-charge (Q) and point-dipole (P) models. The values and the time variations of the Q-model parameters under active storm conditions were found to be similar to those reported by Maier and Krider (1986) for small storms, when the computations were carried out with the same analysis criteria and comparable biases. The parameters of the P solutions were found to vary with time within the storm interval and from storm to storm.

Koshak, William J.↗

Technical notes and correspondence: Stochastic robustness of linear time-invariant control systems

A simple numerical procedure for estimating the stochastic robustness of a linear time-invariant system is described. Monte Carlo evaluations of the system's eigenvalues allows the probability of instability and the related stochastic root locus to be estimated. This analysis approach treats not only Gaussian parameter uncertainties but non-Gaussian cases, including uncertain-but-bounded variation. Confidence intervals for the scalar probability of instability address computational issues inherent in Monte Carlo simulation. Trivial extensions of the procedure admit consideration of alternate discriminants; thus, the probabilities that stipulated degrees of instability will be exceeded or that closed-loop roots will leave desirable regions can also be estimated. Results are particularly amenable to graphical presentation.

Stengel, Robert F.↗

CSM solutions of rotating blade dynamics using integrating matrices

The dynamic behavior of flexible rotating beams continues to receive considerable research attention as it constitutes a fundamental problem in applied mechanics. Further, beams comprise parts of many rotating structures of engineering significance. A topic of particular interest at the present time involves the development of techniques for obtaining the behavior in both space and time of a rotor acted upon by a simple airload loading. Most current work on problems of this type use solution techniques based on normal modes. It is certainly true that normal modes cannot be disregarded, as knowledge of natural blade frequencies is always important. However, the present work has considered a computational structural mechanics (CSM) approach to rotor blade dynamics problems in which the physical properties of the rotor blade provide input for a direct numerical solution of the relevant boundary-and-initial-value problem. Analysis of the dynamics of a given rotor system may require solution of the governing equations over a long time interval corresponding to many revolutions of the loaded flexible blade. For this reason, most of the common techniques in computational mechanics, which treat the space-time behavior concurrently, cannot be applied to the rotor dynamics problem without a large expenditure of computational resources. By contrast, the integrating matrix technique of computational mechanics has the ability to consistently incorporate boundary conditions and 'remove' dependence on a space variable. For problems involving both space and time, this feature of the integrating matrix approach thus can generate a 'splitting' which forms the basis of an efficient CSM method for numerical solution of rotor dynamics problems.

Lakin, William D.↗

Preliminary Results from Coordinated UVCS-CDS-Ulysses Observations

The June 2000 quadrature between the Sun, Earth, and Ulysses took place with Ulysses at a distance of 3.35 AU from the Sun and at heliocentric latitude 58.2 deg south, in the southeast quadrant. This provided an opportunity to observe the corona close to the Sun with Coronal Diagnostic Spectrometer (CDS) and Ultraviolet Coronograph Spectrometer (UVCS) and, subsequently, to sample the same plasma when it reached Ulysses. Here we focus on simultaneous observations of UVCS and CDS made on June 12, 13, 16 and 17. The UVCS data were acquired at heliocentric altitudes ranging from 1.6 to 2.2 solar radii, using different grating positions, in order to get a wide wavelength range. CDS data consisted of Normal Incidence Spectrometer (NIS) full wavelength rasters of 120" x 150" centered at altitudes up to 1.18 solar radii, together with Grazing Incidence Spectrometer (GIS) 4" x 4" rasters within the same field of view, out to 1.2 solar radii. The radial direction to Ulysses passed through a high latitude streamer, throughout the 4 days of observations, Analysis of the spectra taken by UVCS shows a variation of the element abundances in the streamer over our observing interval: however, because the observations were in slightly different parts of the streamer on different days, the variation could be ascribed either to a temporal or spatial effect. The oxygen abundance, however, seems to increase at the edge of the streamer, as indicated by previous analyses. This suggests the variation may be a function of position within the streamer, rather than a temporal effect. Oxygen abundances measured by SWICS on Ulysses are compared with the CDS and UVCS results to see whether changes measured in situ follow the same pattern.

Parenti, S.↗

Funtools: Fits Users Need Tools for Quick, Quantitative Analysis

The Funtools project arose out of conversations with astronomers about the decline in their software development efforts over the past decade. A stated reason for this decline is that it takes too much effort to master one of the existing FITS libraries simply in order to write a few analysis programs. This problem is exacerbated by the fact that astronomers typically develop new programs only occasionally, and the long interval between coding efforts often necessitates re-learning the FITS interfaces. We therefore set ourselves the goal of developing a minimal buy-in FITS library for researchers who are occasional (but serious) coders. In this case, "minimal buy-in" meant "easy to learn, easy to use, and easy to re-learn next month". Based on conversations with astronomers interested in writing code, we concluded that this goal could be achieved by emphasizing two essential capabilities. The first was the ability to write FITS programs without knowing much about FITS, i.e., without having to deal with the arcane rules for generating a properly formatted FITS file. The second was to support the use of already-familiar C/Unix facilities, especially C structs and Unix stdio. Taken together, these two capabilities would allow researchers to leverage their existing programming expertise while minimizing the need to learn new and complex coding rules.

Mandel, Eric↗

The Unusual Wolf-Rayet Star EZ CMa

The XMM-Newton observations were obtained on 29 - 30 October 2001 during the AO-1 Guest Observer program. Our X-ray analysis focused on data from the European Photon Imaging Camera (EPIC). The VLA observations were obtained during a 3.5 hour interval on 1999 Oct. 19 with the array in hybrid BnA configuration. Radio continuum data were acquired at five different frequencies 1.42 GHz (21 cm), 4.86 GHz (6 cm), 8.44 GHz (3.6 cm), 14.94 GHz (2 cm), and 22.46 GHz (1.3 cm). These radio data are unique since they provide an excellent snapshot picture of the dependence of the radio flux on frequency obtained over a short time interval and are thus immune to the variability effects which can distort results obtained from non-contemporaneous observations at different frequencies.

Skinner, Stephen L.↗

High-resolution mapping and genetic characterization of the Lazy-2 gravitropic mutant of tomato

Mutation of the Lazy-2 (Lz-2) gene in tomato (Lycopersicon esculentum mill.) produces a phytochrome-dependent reversal of shoot gravitropism, providing a unique genetic resource for investigating how signals from light modulate gravitropism. We mapped the Lz-2 gene using RFLPs and a PCR-based technique to assess the feasibility of positional cloning. Analysis of a 1338 plant backcross population between L. esculentum and L. pennellii placed Lz-2 within a 1.2 cM interval on chromosome 5, 0.4 cM from TG504-CT201A interval. The inabililty to resolve these markers indicates that Lz-2 resides in a centromeric region in which recombination is highly suppressed. Lazy-2 is tightly linked to but does not encode the gene for ACC4, an enzyme involved in ethylene biosynthesis. We also observed that Lz-2 is partially dominant under certain conditions and stages of development.

Non-NASA Center↗

In-flight adaptive performance optimization (APO) control using redundant control effectors of an aircraft

Practical application of real-time (or near real-time) Adaptive Performance Optimization (APO) is provided for a transport aircraft in steady climb, cruise, turn descent or other flight conditions based on measurements and calculations of incremental drag from a forced response maneuver of one or more redundant control effectors defined as those in excess of the minimum set of control effectors required to maintain the steady flight condition in progress. The method comprises the steps of applying excitation in a raised-cosine form over an interval of from 100 to 500 sec. at the rate of 1 to 10 sets/sec of excitation, and data for analysis is gathered in sets of measurements made during the excitation to calculate lift and drag coefficients C.sub.L and C.sub.D from two equations, one for each coefficient. A third equation is an expansion of C.sub.D as a function of parasitic drag, induced drag, Mach and altitude drag effects, and control effector drag, and assumes a quadratic variation of drag with positions .delta..sub.i of redundant control effectors i=1 to n. The third equation is then solved for .delta..sub.iopt the optimal position of redundant control effector i, which is then used to set the control effector i for optimum performance during the remainder of said steady flight or until monitored flight conditions change by some predetermined amount as determined automatically or a predetermined minimum flight time has elapsed.

Gilyard, Glenn B.↗

Cardiac Mortality in Patients With Stage I and II Diffuse Large B-Cell Lymphoma Treated With and Without Radiation: A Surveillance, Epidemiology, and End-Results Analysis

Purpose: Standard therapy for stage I and II diffuse large B-cell lymphoma consists of combined modality therapy with anthracycline-based chemotherapy, anti-CD20 antibody, and radiation therapy (RT). Curative approaches without RT typically utilize more intensive and/or protracted chemotherapy schedules. Anthracycline-based chemotherapy regimens are associated with a dose-dependent risk of left ventricular systolic dysfunction. We hypothesize that patients treated without RT, i.e., those who are treated with greater total chemotherapy cycles and hence cumulative anthracycline exposure, are at increased risk of cardiac mortality. Methods and Materials: The rate of cardiac-specific mortality (CSM) was analyzed in patients with stage I and II diffuse large B-cell lymphoma diagnosed between 1988 and 2004 by querying the National Cancer Institute Surveillance, Epidemiology, and End-Results database. Analyzable data included gender, age, race, stage, presence of extranodal disease, and RT administration. Results: A total of 15,454 patients met selection criteria; 6,021 (39%) patients received RT. The median follow-up was 36 months (range, 6-180 months). The median age was 64 years. The actuarial incidence rates of CSM at 5, 10, and 15 years were 4.3%, 9.0%, and 13.8%, respectively, in patients treated with RT vs. 5.9%, 10.8% and 16.1%, respectively, in patients treated without RT (p < 0.0001; hazard ratio, 1.35; 95% confidence interval [CI]: 1.16-1.56). The increase in cardiac deaths for patients treated without RT persisted throughout the follow-up period. On multivariate analysis, treatment without RT remained independently associated with an increased risk of CSM (Cox hazard ratio, 1.32; 95% CI: 1.13-1.54; p = 0.0005). Conclusions: Increased anthracycline exposure in patients treated only with chemotherapy regimens may result in an increase in cardiac deaths, detectable only through analysis of large sample sizes. Confirmatory evaluation through meta-analysis of randomized data and design of large prospective trials is warranted.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Analysis of the Long-Term Performance Degradation of Crystalline Silicon Photovoltaic Modules in Tropical Climates

For this study, the long-term performance degradation of five different types of commercial crystalline silicon (c-Si) photovoltaic (PV) modules (one sample for each type) in the tropics, or more specifically the tropical rainforest climate 'Af' by the Koppen climate classification (Singapore), is investigated over a period of seven years, based on outdoor I-V measurements at 10-s intervals. The degradation rates of these c-Si PV modules, based on the temperature-corrected performance ratio, range from -0.03 to -0.47%/year, which satisfy the products' performance warranty. Further analysis of the short-circuit current (I sc), open-circuit voltage, and fill factor for these modules shows that the performance degradation is mainly attributed to the l sc loss. Lastly, the possible causes of the module performance deterioration are also discussed.

14 SOLAR ENERGY↗

Determining Surface Exposure Ages of Regolith Grains in Lunar Core Sample 73002 By Investigating Solar Particle Irradiation Damage

Space weathering causes the surface soils of airless bodies like the Moon to be micro-structurally and chemically altered by exposure to micrometeoroid bombardment and solar wind irradiation. These alterations accumulate in surface grains with continued residence in the uppermost millimeters of regolith. Low energy solar wind ions (largely H+ and He+) produce a layer of radiation damage as they become implanted in grain surfaces. Also present are solar energetic particle (SEP) tracks, which are nanoscale lineations within grain interiors formed by heavy, high-energy ions (mainly Fe group nuclei) penetrating up to millimeters below the surface. Recent work has determined that the width of solar wind-damaged rims on anorthite and olivine, and their respective SEP track densities are correlated with each other and with grain surface exposure age. Core sample 73002, recently released under the Apollo Next Generation Sample Analysis (ANGSA) Program, has provided an opportunity to study material collected from the light mantle formation in the Taurus-Littrow Valley during Apollo 17. The light mantle is thought to have been deposited vial and slide originating from the neighboring South Massif. Spectral analysis of bulk core soils found a plagioclase rich composition, confirming a highlands origin of the formation. Spectral profiles and ferromagnetic resonance (FMR) measurements of bulk soils sampled at cm-intervals from 73002 indicate that regolith up to~9.5 cm in depth have maturity indices consistent with longer durations of surface processing than samples deeper in the core. Thus, this upper ~9 cm layer likely represents the maximum extent of an in-situ reworking zone which may have persisted over 5 to 17million years. Here we present an analysis of grain exposure ages within the in-situ reworking zone of 73002derived from SEP track density measurements via transmission electron microscopy.

J A McFadden↗