Search NASA⌕ Search

SEARCH · Search NASA

Results for “large system simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Supporting Co-Design of Extreme-Scale Systems with In Situ Visual Analysis of Event-Driven Simulations (Final Report)

Extreme-scale systems for compute- and data-centric science are pushing the boundaries of system architectures in order to achieve ambitious goals in terms of computing capability, resilience, and power efficiency. Future systems necessitate emerging designs that incorporate new technologies, system organizations, and computer science techniques, and these changes are not yet well understood. Discrete-event-driven simulation of computing system architectures and subsystems has emerged as a productive and cost-effective means to evaluating potential designs, along with capabilities for executing these simulations of extreme-scale systems. However, techniques for analyzing the behavior of these simulations have not kept pace with our ability to perform the simulations, preventing us from extracting the most value from this promising approach. The objective of this project is to support the codesign of extreme-scale system architectures for compute and data-centric science through research and development of novel methods for analysis and visualization of large-scale event-driven simulations.

97 MATHEMATICS AND COMPUTING↗

TRUST-EABM End-of-Year Report: Release FY20

The Delivery Environments (DE) program work package Testbeds to Reduce Uncertainties in Simulations and Tests (TRUST) is designed to quantify and reduce the uncertainty associated with experimental testing and numerical simulation of large engineering assemblies to support the efficient and responsive development of future systems. Because engineering assemblies contain a large number of uncertainty sources, well-characterized testbeds must be designed to isolate individual uncertainty sources. Once quantified, uncertainty sources can be compared to direct research and development funding towards the largest sources driving behavior of interest. Quantified uncertainty may also be propagated through engineering simulations to determine quantitative confidence in simulation predictions and for comparison against uncertainty in the experimental measurements.

97 MATHEMATICS AND COMPUTING↗

Stage-parallel fully implicit Runge–Kutta solvers for discontinuous Galerkin fluid simulations

In this paper, we develop new techniques for solving the large, coupled linear systems that arise from fully implicit Runge–Kutta methods. This method makes use of the iterative preconditioned GMRES algorithm for solving the linear systems, which has seen success for fluid flow problems and discontinuous Galerkin discretizations. By transforming the resulting linear system of equations, one can obtain a method which is much less computationally expensive than the untransformed formulation, and which compares competitively with other time-integration schemes, such as diagonally implicit Runge–Kutta (DIRK) methods. We develop and test several ILU-based preconditioners effective for these large systems. We additionally employ a parallel-in-time strategy to compute the Runge–Kutta stages simultaneously. Numerical experiments are performed on the Navier–Stokes equations using Euler vortex and 2D and 3D NACA airfoil test cases in serial and in parallel settings. In conclusion, the fully implicit Radau IIA Runge–Kutta methods compare favorably with equal-order DIRK methods in terms of accuracy, number of GMRES iterations, number of matrix–vector multiplications, and wall-clock time, for a wide range of time steps.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Application of the Denovo Discrete Ordinates Radiation Transport Code to Large-Scale Fusion Neutronics

Fusion energy systems pose unique challenges to the modeling and simulation community. These challenges must be met to ensure the success of the ITER experimental fusion reactor. ITER’s complex systems require detailed modeling that goes beyond the scale of comparable simulations to date. In this work, the Denovo radiation transport code was used to calculate neutron fluence and kerma for the JET streaming benchmark. This work was performed on the Titan supercomputer at the Oak Ridge Leadership Computing Facility. Denovo is a novel three-dimensional discrete ordinates transport code designed to be highly scalable. Sensitivity studies have been completed to examine the impact of several deterministic parameters. Furthermore, results were compared against experiment as well as the MCNP and Shift Monte Carlo codes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Performance Evaluation of Heterogeneous GPU Programming Frameworks for Hemodynamic Simulations

Preparing for the deployment of large scientific and engineering codes on upcoming exascale systems with GPU-dense nodes is made challenging by the unprecedented diversity of device architectures and heterogeneous programming models. In this work, we evaluate the process of porting a massively parallel, fluid dynamics code written in CUDA to SYCL, HIP, and Kokkos with a range of backends, using a combination of automated tools and manual tuning. We use a proxy application along with a custom performance model to inform the results and identify additional optimization strategies. At scale performance of the programming model implementations are evaluated on pre-production GPU node architectures for Frontier and Aurora, as well as on current NVIDIA device-based systems Summit and Polaris. Real-world workloads representing 3D blood flow calculations in complex vasculature are assessed. Our analysis highlights critical trade-offs between code performance, portability, and development time.

Martin, Aristotle↗

800 Hours of Operational Experience from a 2 kW(sub e) Solar Dynamic System

From December 1994 to September 1998, testing with a 2 kW(sub e) Solar Dynamic power system resulted in 33 individual tests, 886 hours of solar heating, and 783 hours of power generation. Power generation ranged from 400 watts to over 2 kW(sub e), and SD system efficiencies have been measured up to 17 per cent, during simulated low-Earth orbit operation. Further, the turbo-alternator-compressors successfully completed 100 start/stops on foil bearings. Operation was conducted in a large thermal/vacuum facility with a simulated Sun at the NASA Lewis Research Center. The Solar Dynamic system featured a closed Brayton conversion unit integrated with a solar heat receiver, which included thermal energy storage for continuous power output through a typical low-Earth orbit. Two power conversion units and three alternator configurations were used during testing. This paper will review the test program, provide operational and performance data, and review a number of technology issues.

Shaltens, Richard K.↗

A New Era for Central Processing and Production in CMS

The goal for CMS computing is to maximise the throughput of simulated event generation while also processing event data generated by the detector as quickly and reliably as possible. To maintain this achievement as the quantity of events increases CMS computing has migrated at the Tier 1 level from its old production framework, ProdAgent, to a new one, WMAgent. The WMAgent framework offers improved processing efficiency and increased resource usage as well as a reduction in operational manpower. In addition to the challenges encountered during the design of the WMAgent framework, several operational issues have arisen during its commissioning. The largest operational challenges were in the usage and monitoring of resources, mainly a result of a change in the way work is allocated. Instead of work being assigned to operators, all work is centrally injected and managed in the Request Manager system and the task of the operators has changed from running individual workflows to monitoring the global workload. In this report we present how we tackled some of the operational challenges, and how we benefitted from the lessons learned in the commissioning of the WMAgent framework at the Tier 2 level in late 2011. As case studies, we will show how the WMAgent system performed during some of the large data reprocessing and Monte Carlo simulation campaigns.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Quantifying the uncertainty of kinetic-theory predictions of clustering. Final Report covering 21 September 2011 - 20 September 2014

Previous work has indicated that inelastic grains undergoing homogeneous cooling may be unstable, giving rise to the formation of velocity vortices and particle clusters for sufficiently large systems. Such instabilities are observed in industrial coal and biomass gasifiers and are known to influence gas-solid contact area, mixing dynamics, and heat/mass transfer rates. However, the driving mechanisms that lead to vortices and clusters are not well understood. Discrete-particle simulations provide a well-established method for understanding such mechanisms but are not a feasible technique for predicting the behavior of large-scale systems. Kinetic-theory-based continuum models offer an effective means of describing such flows, and instabilities present a stringent test of such models due to the transient, three-dimensional nature of instabilities and the large range of time and length scales over which these mechanisms occur.This work begins with the study, via a combination of continuum models and discrete- particle simulations, of a relatively simple flow and includes additional complexities in a stepwise manner to assess various driving mechanisms. Comparisons with discrete-particle simulations, which offer detailed, well-established (but computationally limited) descriptions of particle flows, indicate the ability of continuum models to accurately incorporate each mechanism. Specifically, the critical length scale for velocity vortices and/or particle clusters are studied via direct numerical simulation, molecular dynamics simulations, linear stability analyses of the continuum model, and transient simulations of the continuum model in a range of flow complexities, including moderate dissipation and particle concentration, frictional particles collisions, high gradients, and gas-solid flows. Strong agreement between kinetic-theory-based continuum models and discrete-particle simulations is found for a range for conditions. Furthermore, discrete-particle simulations offer insight into the relative importance of various mechanisms for instability in both granular and gas-solid flows. Normal inelasticity and friction are both found to be important in granular flows. Particle collisions, thermal drag, and mean drag are found to be important in gas-solid flows.

42 ENGINEERING↗

BioXyce : an engineering platform for the study of cellular systems.

Researchers use constructs from the field of electrical engineering for the modeling and analysis of biological systems, but few exploit parallels between electrical and biological circuits for simulation purposes. The authors discuss the development of BioXyce, a circuit-based biological simulation platform that uses Xyce, a large-scale electrical circuit simulator, as its simulation engine. BioXyce is capable of simulating whole-cell and multicellular systems. Simulation results for the central metabolism in Escherichia coli K12 and cellular differentiation in Drosophila sp. are presented.

59 BASIC BIOLOGICAL SCIENCES↗

Dynamic analysis of a magnetic bearing system with flux control

Using measured values of two-dimensional forces in a magnetic actuator, equations of motion for an active magnetic bearing are presented. The presence of geometric coupling between coordinate directions causes the equations of motion to be nonlinear. Two methods are used to examine the unbalance response of the system: simulation by direct integration in time; and determination of approximate steady state solutions by harmonic balance. For relatively large values of the derivative control coefficient, the system behaves in an essentially linear manner, but for lower values of this parameter, or for higher values of the coupling coefficient, the response shows a split of amplitudes in the two principal directions. This bifurcation is sensitive to initial conditions. The harmonic balance solution shows that the separation of amplitudes actually corresponds to a change in stability of multiple coexisting solutions.

Knight, Josiah↗

Model reference adaptive attitude control of spacecraft using reaction wheels

A nonlinear model reference adaptive control law for large angle rotational maneuvers of spacecraft using reaction wheels in the presence of uncertainty is presented. The derivation of control law does not require any information on the values of the system parameters and the disturbance torques acting on the spacecraft. The controller includes a dynamic system in the feedback path. The control law is a nonlinear function of the attitude error, the rate of the attitude error, and the compensator state. Simulation results are prsented to show that large angle rotational maneuvers can be performed in spite of the uncertainty in the system.

Singh, Sahjendra N.↗

Surrogate Modeling of Landau Damping with Deep Operator Networks

Kinetic simulations excel at capturing microscale plasma physics phenomena with high accuracy, but their computational demands make them impractical for modeling large-scale space and astrophysical systems. In this context, we build a surrogate model, using Deep Operator Networks (DeepONets), based upon the Vlasov–Poisson simulation data to model the dynamical evolution of plasmas, focusing on the Landau damping process—a fundamental kinetic phenomenon in space and astrophysical plasmas. The trained DeepONets are able to capture the evolution of electric field energy in both linear and nonlinear regimes under various conditions. Extensive validation highlights DeepONets’ robust performance in reproducing complex plasma behaviors with high accuracy, paving the way for large-scale modeling of space and astrophysical plasmas.

plasma astrophysics↗

Nuclear Fuel Cycle System Simulation Tool Based on High-Fidelity Component Modeling

The DOE is currently directing extensive research into developing fuel cycle technologies that will enable the safe, secure, economic, and sustainable expansion of nuclear energy. The task is formidable considering the numerous fuel cycle options, the large dynamic systems that each represent, and the necessity to accurately predict their behavior. The path to successfully develop and implement an advanced fuel cycle is highly dependent on the modeling capabilities and simulation tools available for performing useful relevant analysis to assist stakeholders in decision making. Therefore a high-fidelity fuel cycle simulation tool that performs system analysis, including uncertainty quantification and optimization was developed. The resulting simulator also includes the capability to calculate environmental impact measures for individual components and the system. An integrated system method and analysis approach that provides consistent and comprehensive evaluations of advanced fuel cycles was developed. A general approach was utilized allowing for the system to be modified in order to provide analysis for other systems with similar attributes. By utilizing this approach, the framework for simulating many different fuel cycle options is provided. Two example fuel cycle configurations were developed to take advantage of used fuel recycling and transmutation capabilities in waste management scenarios leading to minimized waste inventories.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Dynamics of groups around interacting double ellipticals: Measuring dark matter haloes

Binary galaxies, as binary stars, are important to measure masses, as suggested by Page (1952). Because three orbit parameters are measurable for galaxies at one instant of time, severe uncertainties remain in the orbit and mass determinations. These uncertainties can partly be overcome by statistical studies of selected samples and/or n-body simulations. Close double galaxies (and isolated galaxies) could also be useful to estimate dynamical masses if we can find test particles around them. Interacting elliptical pairs or dumb-bell galaxies are found with a large range, between 0-1200 km s(exp -1), of relative radial velocities. Standard 2-body orbit calculations, highly uncertain due to projection factors, suggest for the largest velocity differences very large galaxy masses, if the systems are bound and stationary. However, recent n-body simulations model these binaries as galaxies captured from hyperbolic orbits, requiring masses of order a few times 10(exp 11) solar maximum (Borne et al. 1988), but producing systems that are short lived. A different picture appears when we study observationally the dynamical mass of interacting double ellipticals using faint satellite galaxies. These satellites contribute little luminosity and, presumably, little mass to the system. The authors present results of two such groups, basically forming systems of test particles, around the dumb-bells NGC 4782/3 and IC 5049. They also briefly discuss the satellite group around the central dumb-bell in the cluster Sersic 40/6. Apparently, they detect large quantities of dark matter in the vicinity of these dumb-bell galaxies, because the system masses of approx. 4.5 times 10(exp 13) solar mass and 8 times 10(exp 13) solar mass for NGC 4782/3 and IC 5049, respectively, are quite high. Likewise, the mass of the Sersic 40/6 inner core is 7 times 10(exp 13) solar mass. The possibility that a common massive dark matter halo increases the merging times of these types of galaxies is suggested. Here, the authors assume H sub o = 100 km s (exp -1) Mpc(exp -1).

Quintana, H.↗

SPS large array simulation

Three types of computer simulations were developed to study the SPS microwave power transmission system (MPTS). The radially symmetric array simulation is low cost and is utilized to investigate general overall characteristics of the spacetenna at the array level only. "Tiltmain", a subarray level simulation program, is used to study the effects of system errors which modify the far-field pattern. The most recently designed program, "Modmain," takes the detail of simulation down to the RF module level and so to date is the closest numerical model of the reference design.

Rathjen, S.↗

Integrated Data Modeling and Simulation on the Joint Polar Satellite System Program

The Joint Polar Satellite System is a modern, large-scale, complex, multi-mission aerospace program, and presents a variety of design, testing and operational challenges due to: (1) System Scope: multi-mission coordination, role, responsibility and accountability challenges stemming from porous/ill-defined system and organizational boundaries (including foreign policy interactions) (2) Degree of Concurrency: design, implementation, integration, verification and operation occurring simultaneously, at multiple scales in the system hierarchy (3) Multi-Decadal Lifecycle: technical obsolesce, reliability and sustainment concerns, including those related to organizational and industrial base. Additionally, these systems tend to become embedded in the broader societal infrastructure, resulting in new system stakeholders with perhaps different preferences (4) Barriers to Effective Communications: process and cultural issues that emerge due to geographic dispersion and as one spans boundaries including gov./contractor, NASA/Other USG, and international relationships.

Roberts, Christopher J.↗

Attitude control of a three rotor gyrostat in the presence of uncertainty

A nonlinear control law for large angle rotational maneuvers of spacecraft using reaction wheels in the presence of uncertainty is presented. The derivation of this suboptimal control law does not require any information on the values of the system parameters and the disturbance torques acting on the spacecraft. The controller includes a dynamic system in the feedback path. The control law is a nonlinear function of the attitude error, the rate of the attitude error and the compensator state. Simulation results are presented to show that large angle rotational maneuvers can be performed in spite of the uncertainty in the system.

Singh, Sahjendra N.↗

Learning reduced kinetic Monte Carlo models of complex chemistry from molecular dynamics

Here, we propose a novel statistical learning framework for automatically and efficiently building reduced kinetic Monte Carlo (KMC) models of large-scale elementary reaction networks from data generated by a single or few molecular dynamics simulations (MD). Existing approaches for identifying species and reactions from molecular dynamics typically use bond length and duration criteria, where bond duration is a fixed parameter motivated by an understanding of bond vibrational frequencies. Conversely, we show that for highly reactive systems, bond duration should be a model parameter that is chosen to maximize the predictive power of the resulting statistical model. We demonstrate our method on a high temperature, high pressure system of reacting liquid methane, and show that the learned KMC model is able to extrapolate more than an order of magnitude in time for key molecules. Additionally, our KMC model of elementary reactions enables us to isolate the most important set of reactions governing the behavior of key molecules found in the MD simulation. We develop a new data-driven algorithm to reduce the chemical reaction network which can be solved either as an integer program or efficiently using L1 regularization, and compare our results with simple count-based reduction. For our liquid methane system, we discover that rare reactions do not play a significant role in the system, and find that less than 7% of the approximately 2000 reactions observed from molecular dynamics are necessary to reproduce the molecular concentration over time of methane. Furthermore, we describe a framework in this work that paves the way towards a genomic approach to studying complex chemical systems, where expensive MD simulation data can be reused to contribute to an increasingly large and accurate genome of elementary reactions and rates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗