Search NASA⌕ Search

SEARCH · Search NASA

Results for “ordered statistics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Measurement of $CP$ violation in $B^0$ → $J/ψK^S_0$ and $B^0$ → $ψ(2S)K^S_0$ decays

A measurement is presented of decay-time-dependent $CP$ violation in the decays $B^0$ → $J/ψ K^S_0$ and $B^0$ → $ψ(2S)K^S_0$, where the $J/ψ$ is reconstructed from two electrons and the $ψ(2S)$ from two muons. The analysis uses a sample of pp collision data recorded with the LHCb experiment at centre-of-mass energies of 7 and 8 TeV, corresponding to an integrated luminosity of 3 fb -1 . The $CP$-violation observables are measured to be $$ C(B^0 → J/ψ K_S^0) = 0.12± 0.07 ± 0.02, $$ $$ S(B^0 → J/ψ K_S^0) = 0.83 ± 0.08 ± 0.01, $$ $$ C(B^0 → ψ(2S) K_S^0) = -0.05 ± 0.10 ± 0.01, $$ $$ S(B^0 → ψ(2S) K_S^0) = 0.84 ± 0.10 ± 0.01, $$ where $C$ describes $CP$ violation in the direct decay, and $S$ describes $CP$ violation in the interference between the amplitudes for the direct decay and for the decay after $B^0$ - $\bar{B}^0$ oscillation. The first uncertainties are statistical and the second are systematic. The two sets of results are compatible with the previous LHCb measurement using $B^0$ → $J/ψ K^S_0$ decays, where the $J/ψ$ meson was reconstructed from two muons. The averages of all three sets of LHCb results are C ( B 0 &#x2192;<!-- → --> [ c c &#x00AF;<!-- ¯ --> ] K S 0 ) = &#x2212;<!-- - --> 0.017 &#x00B1;<!-- ± --> 0.029 , S ( B 0 &#x2192;<!-- → --> [ c c &#x00AF;<!-- ¯ --> ] K S 0 ) = 0.760 &#x00B1;<!-- ± --> 0.034 , under the assumption that higher-order contributions to the decay amplitudes are negligible. The uncertainties include statistical and systematic contributions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measuring B{sub s} width difference at the {Upsilon}(5s) using quantum entanglement

About 90% of B{sub s}B{sub s} pairs produced at the {Upsilon}(5s) resonance are initially B{sub s}{sup *}B{sub s}{sup *} pairs which decay radiatively to B{sub s}B{sub s}. This implies that the B{sub s}B{sub s} pair will then be in an eigenstate of charge conjugation (i.e. C=-1) and therefore in an entangled state. This allows for a determination of {Delta}{Gamma}{sub s}/{Gamma}{sub s} and the CP phase using a number of possible correlations between the decays of the two B{sub s} mesons. In particular, we consider the time integrated correlation, the time ordering asymmetry, and the time ordering-charge asymmetry, which in addition to time ordering distinguishes B{sub s} from B{sub s}, for various combinations of final states. With the statistics of about O(10{sup 7}-10{sup 8}) {Upsilon}(5s) events available at B factories, we find that the time ordering asymmetry between suitably defined hadronic and flavor specific (tagging) decays offers a promising method for determining the width difference. The corresponding time ordering-charge asymmetry can also bound the mixing phase. Similar observables involving exclusive decays are also considered. At the super B factories with O(50) times greater luminosity time ordering and time ordering-charge asymmetries between inclusive and exclusive modes may also provide additional bounds on the phases in those decays.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Fundamental limitations of high contrast imaging set by small sample statistics

In this paper, we review the impact of small sample statistics on detection thresholds and corresponding confidence levels (CLs) in high-contrast imaging at small angles. When looking close to the star, the number of resolution elements decreases rapidly toward small angles. This reduction of the number of degrees of freedom dramatically affects CLs and false alarm probabilities. Naively using the same ideal hypothesis and methods as for larger separations, which are well understood and commonly assume Gaussian noise, can yield up to one order of magnitude error in contrast estimations at fixed CL. The statistical penalty exponentially increases toward very small inner working angles. Even at 5-10 resolution elements from the star, false alarm probabilities can be significantly higher than expected. Here we present a rigorous statistical analysis that ensures robustness of the CL, but also imposes a substantial limitation on corresponding achievable detection limits (thus contrast) at small angles. This unavoidable fundamental statistical effect has a significant impact on current coronagraphic and future high-contrast imagers. Finally, the paper concludes with practical recommendations to account for small number statistics when computing the sensitivity to companions at small angles and when exploiting the results of direct imaging planet surveys.

79 ASTRONOMY AND ASTROPHYSICS↗

Canonical Statistical Model for Maximum Expected Immission of Wire Conductor in an Aperture Enclosure

Prediction of the maximum expected electromagnetic pick-up of conductors inside a realistic shielding enclosure is an important canonical problem for system-level EMC design of space craft, launch vehicles, aircraft and automobiles. This paper introduces a simple statistical power balance model for prediction of the maximum expected current in a wire conductor inside an aperture enclosure. It calculates both the statistical mean and variance of the immission from the physical design parameters of the problem. Familiar probability density functions can then be used to predict the maximum expected immission for deign purposes. The statistical power balance model requires minimal EMC design information and solves orders of magnitude faster than existing numerical models, making it ultimately viable for scaled-up, full system-level modeling. Both experimental test results and full wave simulation results are used to validate the foundational model.

Computational electromagnetics↗

The 1991 AVIRIS/POLDER experiment in Camargue, France

Airborne campaigns during the eighties provided high spectral resolution data, collected with imaging instruments such as AIS, AVIRIS, FLI, CAESI, and ISM, in order to investigate the relationship with canopy biophysical characteristics. The statistical approaches used to analyze these data do not allow investigation of the causality and the applicability of the observed correlations. Further, statistical studies demonstrated the high degree of redundancy of the spectral information amongst many others. And for retrieving vegetation biophysical characteristics, few results demonstrate the real information gain attributable to the high spectral resolution capability as compared to the use of a few wide wavelength bands. With several new imaging spectrophotometers scheduled for launch during the next 10 years (MERIS, MODIS, HIRIS), progress in the description and understanding of the mechanisms that drive the spectral variation of canopy reflectance is required. Most of these new sensor systems will also have the capability to observe the target under differing view directions. The problem of the combination and the use of the synergy between both the spectral and the directional sources of canopy reflectance variations has to be addressed. Apart from the atmospheric effects, the spectral variation of the light reflected by canopies originates from the leaves, the soil or the other vegetation elements such as branches and fruits. At leaf level, both diffuse reflectance and transmittance may be simulated by simple models, although no accurate information exists on the absorption features of the biochemicals (except water) in the 900-2500nm wavelength range. Many models mimic the directional variability of canopy reflectance at a given wavelength. Combining a leaf spectral model with a canopy directional model provides a powerful tool to analyze this problem. Some of us have initiated such a study, but our approach and theory remain to be tested using canopy data with their complexity, associated experimental error, and atmospheric effects. The main objective of the 1990 POLDER/AVIRIS experiment in Camargue was to provide a consistent data set over various canopies in order to test the applicability of the theory. The experiment, part of the 1991 MAC Europe experiment, involved simultaneous data collection using two sensors: AVIRIS and POLDER which measures the bidirectional and polarization properties of the targets at 670 and 880nm wavebands.

Baret, F.↗

Theory of topological defects and textures in two-dimensional quantum orders with spontaneous symmetry breaking

In this article, we consider two-dimensional (2d) quantum many-body systems with long-range orders, where the only gapless excitations in the spectrum are Goldstone modes of spontaneously broken continuous symmetries. To understand the interplay between classical long-range order of local order parameters and quantum order of long-range entanglement in the ground states, we study the topological point defects and textures of order parameters in such systems. We show that the universal properties of point defects and textures are determined by the remnant symmetry enriched topological order in the symmetry-breaking ground states with a nonfluctuating order parameter, and provide a classification for their properties based on the inflation-restriction exact sequence. We highlight a few phenomena revealed by our theory framework. First, in the absence of intrinsic topological orders, we show a connection between the symmetry properties of point defects and textures to deconfined quantum criticality. Second, when the symmetry-breaking ground state has intrinsic topological orders, we show that the point defects can permute different anyons when braided around. They can also obey projective fusion rules in the sense that multiple vortices can fuse into an Abelian anyon, a phenomenon for which we coin “defect fractionalization.” Finally, we provide a formula to compute the fractional statistics and fractional quantum numbers carried by textures (skyrmions) in Abelian topological orders.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Total ozone trends deduced from Nimbus 7 TOMS data

The Total Ozone Mapping Spectrometer (TOMS) on the Nimbus 7 satellite has been measuring the total column amount of ozone over the globe for more than 11 years. Recent improvements in the data analysis have led to a technique for determining and removing drift in the calibration such that the data at the end of the record are precise to + or - 1.3 percent (2-sigma) relative to the data at the beginning of the record. A statistical model, including terms for seasonal variation, linear trend, quasi-biennial oscillation, solar cycle and second-order autoregressive noise has been fit to the TOMS time series of total ozone data. The linear trend obtained when this statistical model is fit to the TOMS data averaged between 65 N and 65 S latitudes is -0.26 + or - 0.14 percent/year or -3 percent over the 11.6 year time period from November 1978 to May 1990. The trend is near zero (0.0002 + or - 0.2 percent/year) at the equator and increases toward both poles.

Stolarski, Richard S.↗

Bose–Einstein condensation of a two-magnon bound state in a spin-1 triangular lattice

In ordered magnets, the elementary excitations are spin waves (magnons), which obey Bose–Einstein statistics. Similarly to Cooper pairs in superconductors, magnons can be paired into bound states under attractive interactions. The Zeeman coupling to a magnetic field is able to tune the particle density through a quantum critical point, beyond which a ‘hidden order’ is predicted to exist. Here, in this work, we report direct observation of the Bose–Einstein condensation of the two-magnon bound state in Na 2 BaNi(PO 4 ) 2 . Comprehensive thermodynamic measurements confirmed the two-dimensional Bose–Einstein condensation quantum critical point at the saturation field. Inelastic neutron scattering experiments were performed to establish the microscopic model. An exact solution revealed stable two-magnon bound states that were further confirmed by electron spin resonance and nuclear magnetic resonance experiments, demonstrating that the quantum critical point is due to the pair condensation, and the phase below the saturation field is likely the long-sought-after spin nematic phase.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Controlling Complex Coacervation via Random Polyelectrolyte Sequences

The utilization of chemical sequence control in polymeric materials is key to enabling material design on par with biomacromolecular systems. One important avenue for scalable sequence-controlled polymers leverages the random copolymerization of distinct monomers, with the statistical distribution of the monomeric sequence arising from reaction kinetics following a first-order Markov process. Here we utilize the framework of the random phase approximation (RPA) to develop a theory for the phase behavior of symmetric polyelectrolyte coacervates whose chemical sequences are dictated by simple statistical distributions. We find that a high charge "blockiness" within the random sequences favors the formation of denser and more salt-resistant coacervates while simultaneously increasing the width of the two-phase region. Here, we trace these physical effects to the increased cooperativity of Coulomb interactions that results from increased charge blockiness in oppositely charged polyelectrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Statistical uncertainty of fission matrix eigenvalues using perturbation theory

Eigenvalue search of high dominance ratio systems may be slow to converge. The fission matrix element is defined by its element (FM){sub ij}, which are the probability for a neutron born in cell i to create a fission in cell j for a spatial mesh of n{sub i}*n{sub j} elements. Fission matrices are used in Monte Carlo criticality simulations to enhance computing speed, but also to find higher order eigenvalues. However, few studies have been made on the link between statistical uncertainties of fission matrix elements and eigenvalues uncertainties. Thus, dominance ratio statistical uncertainties remain unknown. This paper uses a new generalized perturbation theory (GPT) method to estimate sensitivities of eigenvalues to fission matrix elements and then to calculate dominance ratio uncertainties.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Contactless Determination of Electrical Conductivity of One-Dimensional Nanomaterials by Solution-Based Electro-orientation Spectroscopy

For nanowires of the same composition, and even fabricated within the same batch, often exhibit electrical conductivities that can vary by orders of magnitude. Unfortunately, existing electrical characterization methods are time-consuming, making the statistical survey of highly variable samples essentially impractical. Here, we demonstrate a contactless, solution-based method to efficiently measure the electrical conductivity of 1D nanomaterials based on their transient alignment behavior in ac electric fields of different frequencies. In comparison with direct transport measurements by probe-based scanning tunneling microscopy shows that electro-orientation spectroscopy can quantitatively measure nanowire conductivity over a 5-order-of-magnitude range, 10–5–1 Ω–1 m–1 (corresponding to resistivities in the range 102–107 Ω·cm). With this method, we statistically characterize the conductivity of a variety of nanowires and find significant variability in silicon nanowires grown by metal-assisted chemical etching from the same wafer. We also find that the active carrier concentration of n-type silicon nanowires is greatly reduced by surface traps and that surface passivation increases the effective conductivity by an order of magnitude. Moreover, this simple method makes electrical characterization of insulating and semiconducting 1D nanomaterials far more efficient and accessible to more researchers than current approaches. Electro-orientation spectroscopy also has the potential to be integrated with other solution-based methods for the high-throughput sorting and manipulation of 1D nanomaterials for postgrowth device assembly.

36 MATERIALS SCIENCE↗

Accelerated Depth Computation for Surface Boxplots with Deep Learning

Functional depth is a well-known technique used to derive descriptive statistics (e.g., median, quartiles, and outliers) for 1D data. Surface boxplots extend this concept to ensembles of images, helping scientists and users identify representative and outlier images. However, the computational time for surface boxplots increases cubically with the number of ensemble members, making it impractical for integration into visualization tools. In this paper, we propose a deep-learning solution for efficient depth prediction and computation of surface boxplots for time-varying ensemble data. Our deep learning framework accurately predicts member depths in a surface boxplot, achieving average speedups of 6X on a CPU and 15X on a GPU for the 2D Red Sea dataset with 50 ensemble members compared to the traditional depth computation algorithm. Our approach achieves at least a 99% level of rank preservation, with order flipping occurring only at pairs with extremely similar depth values that pose no statistical differences. This local flipping does not significantly impact the overall depth order of the ensemble members.

Han, Mengjiao↗

A compute-bound formulation of Galerkin model reduction for linear time-invariant dynamical systems

This work aims to advance computational methods for projection-based reduced-order models (ROMs) of linear time-invariant (LTI) dynamical systems. For such systems, current practice relies on ROM formulations expressing the state as a rank-1 tensor (i.e., a vector), leading to computational kernels that are memory bandwidth bound and, therefore, ill-suited for scalable performance on modern architectures. This weakness can be particularly limiting when tackling many-query studies, where one needs to run a large number of simulations. This work introduces a reformulation, called rank-2 Galerkin, of the Galerkin ROM for LTI dynamical systems which converts the nature of the ROM problem from memory bandwidth to compute bound. We present the details of the formulation and its implementation, and demonstrate its utility through numerical experiments using, as a test case, the simulation of elastic seismic shear waves in an axisymmetric domain. We quantify and analyze performance and scaling results for varying numbers of threads and problem sizes. In conclusion, we present an end-to-end demonstration of using the rank-2 Galerkin ROM for a Monte Carlo sampling study. We show that the rank-2 Galerkin ROM is one order of magnitude more efficient than the rank-1 Galerkin ROM (the current practice) and about 970 times more efficient than the full-order model, while maintaining accuracy in both the mean and statistics of the field.

97 MATHEMATICS AND COMPUTING↗

Probing individual single atom electrocatalyst sites by advanced analytical scanning transmission electron microscopy

Single atom electrocatalysts (SAEs) are promising next-generation materials for promoting a variety of important reactions, such as the oxygen reduction, nitrogen reduction, and CO 2 reduction reactions. While bulk characterization techniques such as X-ray absorption spectroscopy and Mössbauer spectroscopy have significantly enhanced our understanding of these catalysts, direct probing of individual single metal atom sites at the atomic scale is necessary to understand local variations in the properties of these sites and accelerate design and synthesis of improved SAEs. Aberration-corrected scanning transmission electron microscopy (STEM) has become a powerful tool for providing this type of atomic-scale information about SAE metal sites. These sites are typically unstable under the electron beam, however, which, in combination with conventional acquisition methods and detectors, has limited the type and quantity of information obtainable by spectroscopic STEM techniques. Here, we map multiple individual SAE metal sites in a nitrogen-doped carbon containing atomically dispersed Fe and Re (FeReNC) at the atomic scale by direct electron detection electron energy-loss spectroscopy (EELS). Direct electron detection provides an improved signal-to-noise ratio over conventional scintillator-based detectors and enables detection and real space localization of weak signals. In addition, we demonstrate an automated method for identification of metal atom positions, placement of the probe on these sites, and simultaneous EELS and energy dispersive X-ray spectroscopic (EDS) signal acquisition. This simultaneous acquisition of EELS and EDS provides access to the composition and bonding of a wide range of SAE metal sites. In this study, focusing the probe directly on the metal sites also increases the relevant data acquisition rate by more than an order of magnitude over two-dimensional mapping, enabling improved statistical measurements of site properties. The versatility, sensitivity, and speed that these techniques provide enhances our ability to probe the local elemental and chemical environment of a large number of individual SAE metal site structures at the atomic scale, enabling an improved understanding of the variations in the local properties of these electrocatalysts to be gained. As a result, significantly increased information about individual metal sites will be available to future electrochemical studies through these techniques, accelerating the development of advanced SAEs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Size-Dependent Biexciton Quantum Yields and Carrier Dynamics of Quasi-Two-Dimensional Core/Shell Nanoplatelets

Quasi-two-dimensional nanoplatelets (NPLs) possess fundamentally different excitonic properties from zero-dimensional quantum dots. We study lateral size-dependent photon emission statistics and carrier dynamics of individual NPLs using second-order photon correlation (g( 2 )(τ)) spectroscopy and photoluminescence (PL) intensity-dependent lifetime analysis. Room-temperature radiative lifetimes of NPLs can be derived from maximum PL intensity periods in PL time traces. It first decreases with NPL lateral size and then stays constant, deviating from the electric dipole approximation. Analysis of the PL time traces further reveals that the single exciton quantum yield in NPLs decreases with NPL lateral size and increases with protecting shell thickness, indicating the importance of surface passivation on NPL emission quality. Second-order photon correlation (g( 2 )(τ)) studies of single NPLs show that the biexciton quantum yield is strongly dependent on the lateral size and single exciton quantum yield of the NPLs. In large NPLs with unity single exciton quantum yield, the corresponding biexciton quantum yield can reach unity. In conclusion, these findings reveal that by careful growth control and core–shell material engineering, NPLs can be of great potential for light amplification and integrated quantum photonic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hybrid Quantum Mechanics/Molecular Mechanics Solvation Scheme for Computing Free Energies of Reactions at Metal–Water Interfaces

We report the development of a quantum mechanics/molecular mechanics free energy perturbation (QM/MM-FEP) method for modeling chemical reactions at metal-water interfaces. This novel solvation scheme combines planewave density function theory (DFT), periodic electrostatic embedded cluster method (PEECM) calculations using Gaussian-type orbitals, and classical molecular dynamics (MD) simulations to obtain a free energy description of a complex metal-water system. We derive a potential of mean force (PMF) of the reaction system within the QM/MM framework. A fixed-size, finite ensemble of MM conformations is used to permit precise evaluation of the PMF of QM coordinates and its gradient defined within this ensemble. Local conformations of adsorbed reaction moieties are optimized using sequential MD-sampling and QM-optimization steps. An approximate reaction coordinate is constructed using a number of interpolated states and the free energy difference between adjacent states is calculated using the QM/MM-FEP method. By avoiding on-the-fly QM calculations and by circumventing the challenges associated with statistical averaging during MD sampling, a computational speedup of multiple orders of magnitude is realized. The method is systematically validated against the results of ab initio QM calculations and demonstrated for C–C cleavage in double-dehydrogenated ethylene glycol on a Pt (111) model surface.

Chemical calculations↗

Recent Advances and Future Advances in Time-of-Flight PET

Simple theory predicts that the statistical noise variance in PET can be reduced by an order of magnitude by using time-of-flight (TOF) information. This reduction can be obtained by improving the coincidence timing resolution, and so would be achievable in clinical, whole body studies using with PET systems that differ little from existing cameras. The potential impact of this development is large, especially for oncology studies in large patients, where it is sorely needed. TOF PET was extensively studied in the 1980's but died away in the 1990's, as it was impossible to reliably achieve sufficient timing resolution without sacrificing other important PET performance aspects, such as spatial resolution and efficiency. Recent advances in technology (scintillators, photodetectors, and high speed electronics) have renewed interest in TOF PET, which is experiencing a rebirth. However, there is still much to be done, both in instrumentation development and evaluating the true benefits of TOF in modern clinical PET. This paper looks at what has been accomplished and what needs to be done before time-of-flight PET can reach its full potential.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Molecular elimination of Br{sub 2} in photodissociation of CH{sub 2}BrC(O)Br at 248 nm using cavity ring-down absorption spectroscopy

The primary elimination channel of bromine molecule in one-photon dissociation of CH{sub 2}BrC(O)Br at 248 nm is investigated using cavity ring-down absorption spectroscopy. By means of spectral simulation, the ratio of nascent vibrational population in v = 0, 1, and 2 levels is evaluated to be 1:(0.5 {+-} 0.1):(0.2 {+-} 0.1), corresponding to a Boltzmann vibrational temperature of 581 {+-} 45 K. The quantum yield of the ground state Br{sub 2} elimination reaction is determined to be 0.24 {+-} 0.08. With the aid of ab initio potential energy calculations, the obtained Br{sub 2} fragments are anticipated to dissociate on the electronic ground state, yielding vibrationally hot Br{sub 2} products. The temperature-dependence measurements support the proposed pathway via internal conversion. For comparison, the Br{sub 2} yields are obtained analogously from CH{sub 3}CHBrC(O)Br and (CH{sub 3}){sub 2}CBrC(O)Br to be 0.03 and 0.06, respectively. The trend of Br{sub 2} yields among the three compounds is consistent with the branching ratio evaluation by Rice-Ramsperger-Kassel-Marcus method. However, the latter result for each molecule is smaller by an order of magnitude than the yield findings. A non-statistical pathway so-called roaming process might be an alternative to the Br{sub 2} production, and its contribution might account for the underestimate of the branching ratio calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗