Search NASA⌕ Search

SEARCH · Search NASA

Results for “spatial orientation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Outside the Continental United States International Travel and Contagion Impact Quick Look Tool

ABSTRACT This paper describes a tool that will allow public health analysts to estimate infectious disease risk at the country level as a function of different international transportation modes. The prototype focuses on a cholera epidemic originating within Latin America or the Caribbean, but it can be expanded to consider other pathogens as well. This effort leverages previous work in collaboration with the Centers for Disease Control and Prevention to develop the International Travel to Community Impact (IT-CI) model, which analyzes and assesses potential international disease outbreaks then estimates the associated impacts to U.S. communities and the nation as a whole and orient it for use Outside the Continental United States (OCONUS). For brevity, we refer to this refined model as OIT-CI. First, we developed an operationalized meta-population spatial cholera model for Latin America and the Caribbean at the secondary administrative-level boundary. Secondly, we developed a robust function of human airline critical to approximating mixing patterns in the meta- population model. In the prototype version currently presented here, OIT-CI models a cholera epidemic originating in a Latin American or Caribbean country and spreading via airline transportation routes. Disease spread is modeled at the country level using a patch model with a connectivity function based on demographic, geospatial, and human transportation data. We have also identified data to estimate the water and health-related infrastructure capabilities of each country to include this potential impact on disease transmission.

Biosurveillance↗

German telecommunications satellite (Deutscher fernmelde satellit) (DFS-1 and -2)

The German Telecommunications Satellite (DFS) Program is to provide telecommunications service for high data rate transmission of text and video data to the Federal Republic of Germany within the 11-14 GHz and 20-30 GHz bands. The space segment of this program is composed of three satellites, DFS-1, DFS-2, and DFS-3, which will be located at 23.5 degrees E longitude of the geostationary orbit. The DFS will be launched from the Center Spatial Guyanis in French Giana on an Ariane launch vehicle. The mission follows the typical injection sequence: parking orbit, transfer orbit, and earth orbit. Attitude maneuvers will be performed to orient the spacecraft prior to Apogee Kick Motor (AKM) firing. After AKM firing, drift phase orbital and attitude maneuvers will be performed to place the spacecraft in its final geostationary position. The Deep Space Network (DSN) will support the transfer and drift orbit mission phases. Information is presented in tabular form for the following areas: DSN support, compatibility testing, frequency assignments, telemetry, command, and tracking support responsibilities.

Hiendlmeier, G.↗

Photonic Interrogation and Control of Nano Processes

My research activities for the summer of 2003 consisted of two projects: One project was concerned with determining a method for predicting the static and dynamic assembly properties of nano-structures using laser tweezers. The other project was to investigate the generation of Laguerre-Gaussian modes using a spatial light modulator incorporated into an optical tweezers system. Concerning the first project, I initially pursued the approach suggested by my NASA colleague Dr. Art Decker. This approach involved mimicking the model of the structure of atomic nucleus for the assembly of 1 to 100 atoms using allowed quadruple transitions induced by orbital angular momentums of a Laguerre- Gaussian (Doughnut) laser mode. After realizing the inaptness of the nuclear model with the nanostructure model as far as the binding forces and transitions were concerned, I focused on using quantum dot modei. This model was not attuned also for the host lattice influences the electronic structure of the quantum dot. Thus one other option that I decided to pursue was the approach of molecular quantum mechanics. In this approach the nanostructure is treated as a large (10-100 nm) molecule constructed from single element or multi-elements. Subsequent to consultation with Dr. Fred Morales, a chemical engineer at NASA GRC, and Dr. David Ball, a computational chemist at Cleveland State University, I acquired a molecular-quantum computation software, Hyperchem 7.0. This software allows simulation of different molecular structures as far as their static and dynamic behaviors are concerned. The time that I spent on this project was about eight weeks. Once this suitable approach was identified, I realized the need to collaborate with a computational quantum chemist to pursue searching for stable nanostructures in the range of 10-100 nm that we can be assembled using laser tweezers. The second project was about generating laser tweezers that possess orbital angular momentum. As shown, we were able to generate laser tweezers modes of different orbital angular momentum using a spatial light modulator incorporated into a laser tweezers system. The motivation for investigating these types of modes stems from being able to spin particles at high speeds and also to orient two particles in separate traps and then join them together. Also, there has been recent intense interest on fundamental physics research on orbital angular momentum of light. The fact that circularly polarized light may have associated with it angular momentum that relates to the spin of individual photons (spin 0 for the plane polarized light, spin +1 for the right-circularly polarized light and spin -1 for the left-circularly polarized light) was first demonstrated by Beth in 1936. Orbital angular momentum is, however, distinct from spin in that the spin angular momentum of light is intrinsically linked to the behavior of the electric field in the light whereas orbital angular momentum is a consequence of inclined wavefronts. In 1992 L. Allen, et al showed that the Laguerre-Gaussian (LG) modes could possess well-defined orbital angular momentum that can exceed 1 planck's constant, i.e. l plancks constant per photon, where l is the azimuthal index of the mode.

Jassemnejad, Baha↗

Extracellular vesicles of calcifying turkey leg tendon characterized by immunocytochemistry and high voltage electron microscopic tomography and 3-D graphic image reconstruction

To gain insight into the structure and possible function of extracellular vesicles in certain calcifying vertebrate tissues, normally mineralizing leg tendons from the domestic turkey, Meleagris gallopavo, have been studied in two separate investigations, one concerning the electron microscopic immunolocalization of the 66 kDa phosphoprotein, osteopontin, and the other detailing the organization and distribution of mineral crystals associated with the vesicles as determined by high voltage microscopic tomography and 3-D graphic image reconstruction. Immunolabeling shows that osteopontin is related to extracellular vesicles of the tendon in the sense that its initial presence appears coincident with the development of mineral associated with the vesicle loci. By high voltage electron microscopy and 3-D imaging techniques, mineral crystals are found to consist of small irregularly shaped particles somewhat randomly oriented throughout individual vesicles sites. Their appearance is different from that found for the mineral observed within calcifying tendon collagen, and their 3-D disposition is not regularly ordered. Possible spatial and temporal relationships of vesicles, osteopontin, mineral, and collagen are being examined further by these approaches.

NASA Discipline Musculoskeletal↗

Diagenetic Crystal Growth in the Murray Formation, Gale Crater, Mars

The Pahrump region (Gale Crater, Mars) marks a critical transition between sedimentary environments dominated by alluvial-to-fluvial materials associated with the Gale crater rim, and depositional environments fundamentally linked to the crater's central mound, Mount Sharp. At Pahrump, the Murray formation consists of an approximately 14-meter thick succession dominated by massive to finely laminated mudstone with occasional interbeds of cross-bedded sandstone, and is best interpreted as a dominantly lacustrine environment containing tongues of prograding fluvial material. Murray formation mudstones contain abundant evidence for early diagenetic mineral precipitation and its subsequent removal by later diagenetic processes. Lenticular mineral growth is particularly common within lacustrine mudstone deposits at the Pahrump locality. High-resolution MAHLI images taken by the Curiosity rover permit detailed morphological and spatial analysis of these features. Millimeter-scale lenticular features occur in massive to well-laminated mudstone lithologies and are interpreted as pseudomorphs after calcium sulfate. The distribution and orientation of lenticular features suggests deposition at or near the sediment-water (or sediment-air) interface. Retention of chemical signals similar to host rock suggests that original precipitation was likely poikilotopic, incorporating substantial amounts of the primary matrix. Although poikilotopic crystal growth is common in burial environments, it also occurs during early diagenetic crystal growth within unlithified sediment where high rates of crystal growth are common. Loss of original calcium sulfate mineralogy suggests dissolution by mildly acidic, later-diagenetic fluids. As with lenticular voids observed at Meridiani by the Opportunity Rover, these features indicate that calcium sulfate deposition may have been widespread on early Mars; dissolution of depositional and early diagenetic minerals is a likely source for both calcium and sulfate ion-enrichment in burial fluids that precipitated in ubiquitous late-stage hydrofracture veins

Kah, L. C.↗

Patch-based image segmentation of satellite imagery using minimum spanning tree construction

We present a method for hierarchical image segmentation and feature extraction. This method builds upon the combination of the detection of image spectral discontinuities using Canny edge detection and the image Laplacian, followed by the construction of a hierarchy of segmented images of successively reduced levels of details. These images are represented as sets of polygonized pixel patches (polygons) attributed with spectral and structural characteristics. This hierarchy forms the basis for object-oriented image analysis. To build fine level-of-detail representation of the original image, seed partitions (polygons) are built upon a triangular mesh composed of irregular sized triangles, whose spatial arrangement is adapted to the image content. This is achieved by building the triangular mesh on the top of the detected spectral discontinuities that form a network of constraints for the Delaunay triangulation. A polygonized image is represented as a spatial network in the form of a graph with vertices which correspond to the polygonal partitions and graph edges reflecting pairwise partitions relations. Image graph partitioning is based on the iterative graph oontraction using Boruvka's Minimum Spanning Tree algorithm. An important characteristic of the approach is that the agglomeration of partitions is constrained by the detected spectral discontinuities; thus the shapes of agglomerated partitions are more likely to correspond to the outlines of real-world objects.

97 MATHEMATICS AND COMPUTING↗

The Spatial Relationship of Graben and Pit Craters at Rimae Daniell and the Implications of Scarp Formation

A geomorphologically complex and understudied region on the Moon is Rimæ Daniell, situated in Lacus Somniorum. This region is characterized by a set of NNW-SSE-oriented grabens, which have been implied to be underlain by dikes through topographic measurements of ground displacements and faulting processes. The coverage of topographic measurements with the Lunar Orbiter Laser Altimeter (LOLA) aboard the Lunar Reconnaissance Orbiter (LRO) now allows for an indepth morphologic analysis of lunar grabens. Lunar grabens, in general, occur peripheral to some near-side mare units, within floor-fractured craters, and inside larger impact structures. From, LOLA data across Rimæ Daniell indicate that these grabens are located atop broad rises that stand 100–150 m above their surroundings. Although has mapped out the northwestern most grabens at Rimæ Daniell, this area has a complex geologic history, including pit chain craters and the transition of the graben system to a steep scarp, which is disrupted by knobby terrain.

C. J. Ahrens↗

An efficient protocol for radiochromic film dosimetry combining calibration and measurement in a single scan

Purpose: Radiochromic film provides dose measurement at high spatial resolution, but often is not preferred for routine evaluation of patient-specific intensity modulated radiation therapy (IMRT) plans owing to ease-of-use factors. The authors have established an efficient protocol that combines calibration and measurement in a single scan and enables measurement results to be obtained in less than 30 min. This avoids complications due to postexposure changes in radiochromic film that delay the completion of a measurement, often for up to 24 h, in commonly used methods. In addition, the protocol addresses the accuracy and integrity of the measurement by eliminating environmental and interscan variability issues. Methods: The authors collected dose-response data from six production lots of Gafchromic EBT3 film and three production lots of EBT2 film at doses up to 480 cGy. In this work, the authors used seven different scanners of two different models-Epson 10000XL and V700; postexposure times before scanning from 30 min to 9 days; ambient temperatures for scanning spanning 11 Degree-Sign C; and two film orientations. Scanning was in 48-bit RGB format at 72 dpi resolution. Dose evaluation was conducted using a triple-channel dosimetry method. To evaluate the measurement protocol, patient specific IMRT and volumetric modulated arc therapy (VMAT) plans were exposed onto EBT3 films on a Varian Trilogy Linac. Film scanning was done following the protocol under a number of different conditions and the dose maps were analyzed to demonstrate the equivalence of results. Results: The results indicated that the dose-response data could be fit by a set of related rational functions leading to the description of a generic calibration curve. A simplified dosimetry protocol was established where dose-response data for a specific film lot, scanner, and scanning conditions could be derived from two films exposed to known doses. In most cases only one calibrated exposure was required since the dose for one of the films could be zero. Using the Gamma test criterion of 2%/2 mm to evaluate the measurements, similar passing rates ranging between about 95% and 99% for the fields studied were obtained from application films digitized under a variety of conditions all of them different than the conditions under which the calibration films were scanned. Conclusions: The authors have developed a simplified and efficient protocol to measure doses delivered by an IMRT or VMAT plan using only the patient film, one calibration film, one unexposed film, and applying a single scan to acquire a digital image for calculation and analysis. The simplification and timesaving offer a potential practical solution for using radiochromic film for routine treatment plan quality assurance without sacrificing spatial resolution for convenience.

07 ISOTOPE AND RADIATION SOURCES↗

Measurements of DIII-D poloidal field by fiber-optic pulsed polarimetry

A new technique for measuring the spatial and temporal structure of the poloidal field is presented, whereby the magnetic field causes the polarization of light traveling through an optical fiber to rotate via the Faraday effect by an amount proportional to the strength of the field oriented along the fiber. In fiber optic pulsed polarimetry, changes in the polarization of the backscatter light from the fiber are detected, thereby permitting measurement of the field as a function of position along the fiber. In this proof-of-principle experiment, specially prepared single-mode fibers with weak fiber Bragg gratings were installed in the poloidal direction on the outside of the thermal blanket on DIII-D. Light at 532 nm from a mode-locked Nd:YAG laser was injected into the optical fibers. The laser repetition rate was 895 kHz with a pulse length of <10 ps, resulting in ~1 μs temporal resolution. A photodetector system measured the Stokes polarization components necessary to determine the amount of polarization rotation. For this experiment, bandwidth limitations of the detectors resulted in a spatial resolution of ≈2 cm. The measured temporal and spatial distributions of the poloidal field are consistent with inductive probe measurements and Elastodynamic Finite Integration Technique reconstructions of the spatial distribution. Furthermore, this demonstrates the ability of this technique to provide real-time detection of the temporal and spatial variations of the poloidal field. Besides revealing more detailed information about the plasma, this new diagnostic capability can also help in detecting instabilities in real time, thereby enabling enhanced machine protection.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Probing Phase Transformations and Microstructural Evolutions at the Small Scales: Synchrotron X-ray Microdiffraction for Advanced Applications in [Phase 3 Memory,] 3D IC (Integrated Circuits) and Solar PV (Photovoltaic) Devices

Synchrotron x-ray microdiffraction (μXRD) allows characterization of a crystalline material in small, localized volumes. Phase composition, crystal orientation and strain can all be probed in few-second time scales. Crystalline changes over a large areas can be also probed in a reasonable amount of time with submicron spatial resolution. However, despite all the listed capabilities, μXRD is mostly used to study pure materials but its application in actual device characterization is rather limited. This article will explore the recent developments of the μXRD technique illustrated with its advanced applications in microelectronic devices and solar photovoltaic systems. Application of μXRD in microelectronics will be illustrated by studying stress and microstructure evolution in Cu TSV (through silicon via) during and after annealing. Here, the approach allowing study of the microstructural evolution in the solder joint of crystalline Si solar cells due to thermal cycling will be also demonstrated.

36 MATERIALS SCIENCE↗

Load partitioning between single bulk grains in a two-phase duplex stainless steel during tensile loading.

The lattice strain tensor evolution for single bulk grains of austenite and ferrite in a duplex stainless steel during tensile loading to 0.02 applied strain has been investigated using in situ high-energy X-ray measurements and finite-element modeling. Single-grain X-ray diffraction lattice strain data for the eight austenite and seven ferrite grains measured show a large variation of residual lattice strains, which evolves upon deformation to the point where some grains with comparable crystallographic orientations have lattice strains different by 1.5 x 10{sup -3}, corresponding to a stress of -300MPa. The finite-element simulations of the 15 measured grains in three different spatial arrangements confirmed the complex deformation constraint and importance of local grain environment.

36 MATERIALS SCIENCE↗

Two-dimensional patterning of mesoscale fibers using acoustophoresis

The performance of functional composites can rely critically on the arrangement of secondary phases; for example, patterned networks of conductive particles can impart anisotropic thermal, electric or ionic conductivity while preserving flexibility in the matrix. We demonstrate the use of standing acoustic waves to generate periodic patterns of short fibers. We extend the range of possible patterns with the first demonstration of both rectangular grids and arrays of octagons interspersed with rectangles. These newly demonstrated patterns are rationalized using theoretical models of acoustic forces and torques on fibers that account for two-dimensional spatial variations arising from applied acoustic fields. The models enable simulations of fiber motion, which are used to (i) map out final fiber positions as a function of initial position and orientation, and (ii) corroborate experiments visualizing fiber motion and final patterns. This approach provides a fast and accurate way to predict emergent fiber patterns as a function of excitation modality and fiber length. The theory and experiments clearly indicate strong coupling between the length of the fibers and the spacing of the acoustic nodes. Furthermore, this coupling is used to estimate reductions in percolation thresholds associated with the ratio of fiber length and acoustic wavelength.

25 ENERGY STORAGE↗

MULTIPLE FAST MOLECULAR OUTFLOWS IN THE PRE-PLANETARY NEBULA CRL 618

CRL 618 is a well-studied pre-planetary nebula. It has multiple highly collimated optical lobes, fast molecular outflows along the optical lobes, and an extended molecular envelope that consists of a dense torus in the equator and a tenuous round halo. Here we present our observations of this source in CO J = 3-2 and HCN J = 4-3 obtained with the Submillimeter Array at up to ∼0.''3 resolutions. We spatially resolve the fast molecular outflow region previously detected in CO near the central star and find it to be composed of multiple outflows that have similar dynamical ages and are oriented along the different optical lobes. We also detect fast molecular outflows further away from the central star near the tips of the extended optical lobes and a pair of equatorial outflows inside the dense torus. We find that two episodes of bullet ejections in different directions are needed, one producing the fast molecular outflows near the central star and one producing the fast molecular outflows near the tips of the extended optical lobes. One possibility to launch these bullets is a magneto-rotational explosion of the stellar envelope.

79 ASTRONOMY AND ASTROPHYSICS↗

Hopf Solitons in Helical and Conical Backgrounds of Chiral Magnetic Solids

Three-dimensional topological solitons attract a great deal of interest in fields ranging from particle physics to cosmology, but remain experimentally elusive in solid-state magnets. Here we numerically predict magnetic heliknotons, an embodiment of such nonzero-Hopf-index solitons localized in all spatial dimensions while embedded in a helical or conical background of chiral magnets. In this work we describe conditions under which heliknotons emerge as metastable or ground-state localized nonsingular structures with fascinating knots of magnetization field in widely studied materials. We demonstrate magnetic control of three-dimensional spatial positions of such solitons, as well as show how they interact to form moleculelike clusters and possibly even crystalline phases comprising three-dimensional lattices of such solitons with both orientational and positional order. Finally, we discuss both fundamental importance and potential technological utility of magnetic heliknotons.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

First Sagittarius A* Event Horizon Telescope Results. VII. Polarization of the Ring

Abstract The Event Horizon Telescope observed the horizon-scale synchrotron emission region around the Galactic center supermassive black hole, Sagittarius A* (Sgr A*), in 2017. These observations revealed a bright, thick ring morphology with a diameter of 51.8 ± 2.3 μas and modest azimuthal brightness asymmetry, consistent with the expected appearance of a black hole with mass M ≈ 4 × 106 M ⊙. From these observations, we present the first resolved linear and circular polarimetric images of Sgr A*. The linear polarization images demonstrate that the emission ring is highly polarized, exhibiting a prominent spiral electric vector polarization angle pattern with a peak fractional polarization of ∼40% in the western portion of the ring. The circular polarization images feature a modestly (∼5%–10%) polarized dipole structure along the emission ring, with negative circular polarization in the western region and positive circular polarization in the eastern region, although our methods exhibit stronger disagreement than for linear polarization. We analyze the data using multiple independent imaging and modeling methods, each of which is validated using a standardized suite of synthetic data sets. While the detailed spatial distribution of the linear polarization along the ring remains uncertain owing to the intrinsic variability of the source, the spiraling polarization structure is robust to methodological choices. The degree and orientation of the linear polarization provide stringent constraints for the black hole and its surrounding magnetic fields, which we discuss in an accompanying publication.

79 ASTRONOMY AND ASTROPHYSICS↗

The brightness distribution of IRC +10216 at 11 microns

The brightness distribution of IRC +10216 at a wavelength of 11 microns was measured in detail using a spatial interferometer. This brightness distribution appears to have azimuthal symmetry; an upper limit of 1.1 may be set to the ellipticity at 11 microns if the object has a major axis oriented either along or perpendicular to the major axis of the optical image. The radial distribution shows both compact and extended emission. The extended component, which is due to thermal emission from circumstellar dust, contributes 91% of the total flux and has a 1/e diameter of 0.90 minutes. The tapered shape of this component is consistent with a l/r squared dust density dependence. The compact component is unresolved (less than 0.2 minutes in diameter) and represents emission from the central star seen through the circumstellar envelope.

Sutton, E. C.↗

The brightness distribution of IRC +10216 at 11 microns

The brightness distribution of IRC +10216 at a wavelength of 11 microns has been measured in detail by using spatial interferometer. This brightness distribution appears to have azimuthal symmetry; an upper limit of 1.1 may be set to the ellipticity at 11 microns if the object has a major axis oriented either along or perpendicular to the major axis of the optical image. The radial distribution shows both compact and extended emission. The extended component, which is due to thermal emission from circumstellar dust, contributes 91% of the total flux and has a 1/e diameter of 0.90 arcsec. The tapered shape of this component is consistent with a dust density dependence on the inverse square of radial distance. The compact component is unresolved (less than 0.2 arcsec in diameter) and represents emission from the central star seen through the circumstellar envelope.

Sutton, E. C.↗

Source structure errors in the synchronization of clocks by radio interferometry

Radio interferometry has the potential of synchronizing clocks across intercontinental distances with accuracies better than one nanosecond. One of the potential error sources in such determinations is the spatial structure of the natural radio sources that provide the reference signals. Due to their extent, the effective position of these sources can vary as a function of the length and orientation of the baseline vector joining the two antennas. If they are not corrected, such variations can lead to errors in clock synchronization. The theory of structure corrections is presented and specific examples are given to illustrate the nature and size of the effect.

Thomas, J. B.↗