Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface steps”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Exotic Long-Range Surface Reconstruction on La 0.7 Sr 0.3 MnO 3 Thin Films

Due to an extremely diverse phase space, La 1–x Sr x MnO 3 , as with other manganites, offers a wide range of tunability and applications including colossal magnetoresistance and use as spin-polarized electrodes. Here, we study an unprecedented, exotic surface reconstruction (6 × 6) in La 1–x Sr x MnO 3 (x = 0.3) observed via low-energy electron diffraction (LEED). Scanning tunneling microscopy (STM) shows the surface is relatively flat, with unit-cell step heights, and X-ray photoelectron spectroscopy (XPS) reveals a strong degree of Sr segregation at the surface. By combining electron diffraction and first-principles computations, we propose that the long-range surface reconstruction consists of a Sr-segregated surface with La (6 × 6) ordering. This study expands our understanding of manganite systems and underscores their ability to form interesting surface reconstructions, driven largely by cation segregation that can potentially be controlled for tuning surface ordering.

36 MATERIALS SCIENCE↗

Note: A single-chamber tool for plasma activation and surface functionalization in microfabrication

We present a simple apparatus for improved surface modification of polydimethylsiloxane (PDMS) microfluidic devices. A single treatment chamber for plasma activation and chemical/physical vapor deposition steps minimizes the time-dependent degradation of surface activation that is inherent in multi-chamber techniques. Contamination and deposition irregularities are also minimized by conducting plasma activation and treatment phases in the same vacuum environment. An inductively coupled plasma driver allows for interchangeable treatment chambers. Atomic force microscopy confirms that silane deposition on PDMS gives much better surface quality than standard deposition methods, which yield a higher local roughness and pronounced irregularities in the surface.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Automated Array Assembly, Phase 2

The solar cell module process development activities in the areas of surface preparation are presented. The process step development was carried out on texture etching including the evolution of a conceptual process model for the texturing process; plasma etching; and diffusion studies that focused on doped polymer diffusion sources. Cell processing was carried out to test process steps and a simplified diode solar cell process was developed. Cell processing was also run to fabricate square cells to populate sample minimodules. Module fabrication featured the demonstration of a porcelainized steel glass structure that should exceed the 20 year life goal of the low cost silicon array program. High efficiency cell development was carried out in the development of the tandem junction cell and a modification of the TJC called the front surface field cell. Cell efficiencies in excess of 16 percent at AM1 have been attained with only modest fill factors. The transistor-like model was proposed that fits the cell performance and provides a guideline for future improvements in cell performance.

Carbajal, B. G.↗

Vertically oriented ZrO 2 –TiO 2 –Nb 2 O 5 –Al 2 O 3 mixed nanopatterned bioceramics on Ti6Al7Nb implant assessed by laser spallation technique

Recently, reports on the fabrication of nonstructural configuration have generated scientific interest due to increased awareness of the oxide nanotubes in the biomedical implant field and other industrial approaches. In this paper, highly ordered ZrO 2 –TiO 2 –Nb 2 O 5 –Al 2 O 3 nanotube arrays were grown by physical vapor deposition (PVD) of a zirconium layer on titanium-niobium alloy implant (IMPTi67) and succeeding anodic oxidation at a constant voltage (60 V) with exposure times ranging from 30 to 300 min. To crystallize the resulting mixed oxide nanotubes, heat treatment was also applied. The nanotubes were placed in an atmospheric furnace at temperatures ranging from 450 to 800 °C for 2 h. This treatment provided a morphological evolution was strongly influenced by the anodization time, where highly aligned bamboo-shaped oxide nanotubes (161 ± 44 nm in inside diameter and ~1 μm in length) were formed after 300 min of anodization. After annealing at temperature below 500 °C, the nano-array configuration remained stable and the average inner diameter decreased to around 40 nm. The effects of anodically fabrication time on the adhesion strength of four-phase multilayered mixed oxide nanotubes on anodized Zr/IMPTi67 surfaces assed by microscratch analysis. From the results, increasing the annealing temperature further to 800 °C fully destroyed the nanotubes and consequently the tubular arrangement was converted to a coarse grain structure. It was revealed that annealing at 450 °C for 2 h was the optimum conditions for stable nanotubular array generation, where the highest adhesion strength (shifted from 2595.59 to 2640.12 mN), microhardness (372 HV) and hydrophilicity (15 ± 1°) were recorded. It is notify that the adhesion strength of highly ordered mixed nanotubes was remarkably decreased after thermal treatment at 800 °C (1817.51 mN). Through the laser spallation analysis, the intrinsic adhesion strength of the Zr/IMPTi67 interface was found to be at 63 MPa, while the first stages of failure occurred at a stress state of 35 MPa. The adhesion of the film with the tubular structure proved to have a significantly larger adhesion strength of 246 MPa for the complete failure and 203 MPa for incipient stages of spallation. Finally, the considered surface modification can be an effective step in determining the interface strength between biomedical implants and the nanostructured coatings.

36 MATERIALS SCIENCE↗

Pathways Following Electron Injection: Medium Effects and Cross-Surface Electron Transfer in a Ruthenium-Based, Chromophore–Catalyst Assembly on TiO 2

Interfacial dynamics following photoexcitation of the water oxidation assembly [((PO 3 H 2 ) 2 bpy) 2 Ru II (bpy-bimpy)Ru II (tpy)(OH 2 )] 4+ , -[Ru a II –Ru b II –OH 2 ] 4+ , on nanocrystalline TiO 2 electrodes, starting from either -[Ru a II –Ru b II –OH 2 ] 4+ or -[Ru a II –Ru b III –OH 2 ] 5+ , have been investigated. Transient absorption measurements for TiO 2 –[Ru a II –Ru b II –OH 2 ] 4+ in 0.1 M HPF 6 or neat trifluoroethanol reveal that electron injection occurs with high efficiency but that hole transfer to the catalyst, which occurs on the electrochemical time scale, is inhibited by local environmental effects. Back electron transfer occurs to the oxidized chromophore on the microsecond time scale. Photoexcitation of the once-oxidized assembly, TiO 2 –[Ru a II –Ru b III –OH 2 ] 5+ , in a variety of media, generates -[Ru a III –Ru b III –OH 2 ] 6+ . The injected electron randomly migrates through the surface oxide structure reducing an unreacted -[Ru a II –Ru b III –OH 2 ] 5+ assembly to -[Ru a II –Ru b II –OH 2 ] 4+ . In a parallel reaction, -[Ru a III –Ru b III –OH 2 ] 6+ formed by electron injection undergoes proton loss giving -[Ru a II –Ru b IV $=$O] 4+ with possible conversion to -[Ru a II –Ru b II –OH 2 ] 4+ by an electrolyte-mediated reaction. In the following slow step, re-equilibration on the surface occurs either by reaction with added Fe III/II or by cross-surface electron transfer between spatially separated -[Ru a II –Ru b IV $=$O] 4+ and -[Ru a II –Ru b II –OH 2 ] 4+ assemblies to give -[Ru a II –Ru b III –OH 2 ] 5+ with a half-time of t 1/2 ~ 68 μs. Finally, these results and analyses show that the transient surface behavior of the assembly and cross-surface reactions play important roles in producing and storing redox equivalents on the surface that are used for water oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comment on ''Light-induced atomic desorption and diffusion of Rb from porous alumina''

In a recent article [Phys. Rev. A 81, 037801 (2010)] a theory of light-induced atomic desorption for Rb in porous alumina is proposed. We point out that both the main assumption of this theory (the diffusion inside the pores treated as a random walk with the adsorption to the inner surface of the pores at any step) and several further hypotheses supporting the theoretical model require a revision.

36 MATERIALS SCIENCE↗

A cohesive zone treatment for the material point method involving problems of large deformation and damage

A new algorithm is described that permits the use of cohesive zones in the material point method for problems involving large deformation and fracture. In contrast to previous cohesive zone implementations, this method does not utilize massless surface-element particles. Instead, cohesive tractions are computed using the shape function mappings from a reference grid configuration in combination with explicitly defined particle surface normals and surface positions. These normals and relative surface positions are updated each time step according to particle deformation. The tractions are converted to cohesive forces using the nodal areas and mapped back to particles using the same reference shape function mappings. These forces are then remapped by conventional particle-to-grid interpolation as external forces using the current-configuration shape-function mappings. This allows highly compliant cohesive zones to function over jump displacements larger than a grid cell. Upon damage, these interfaces can revert to conventional multi-field contact surfaces. This approach is general and readily applies to two and three dimensions as well as being compatible with damage-field gradient partitioning offering exceptional computational flexibility. The framework for this method enables other capabilities, such as improved contact precision using explicitly defined surface normals and positions, and a method to mitigate spurious material damage at weak discontinuities between stiff brittle materials and soft or compliant materials.

Cohesive zone↗

Correlating furfural reaction pathways with interactions between furfural and monometallic surfaces

Controlling the selectivity of furfural reaction is an important step towards valorizing this important platform chemical in biomass conversion. Previous studies speculate that the selectivity of furfural reaction depends on the interactions of furan ring with metal surfaces. In this work, high resolution electron energy loss spectroscopy (HREELS) and temperature programmed desorption (TPD) are employed to directly study the correlations between furfural reaction pathways and interactions between furfural and different monometallic surfaces. Monometallic surfaces with strong ring interactions favor ring-opening products, while monometallic surfaces with weak ring interactions favor furan production. Oxophilic metal surface like Fe(110) promotes the hydrodeoxygenation pathway to produce 2-methylfuran due to strong interaction with the carbonyl group. Furthermore, these results should provide guidance in the future catalyst design for converting furfural to value-added products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formic Acid: A Hydrogen-Bonding Cocatalyst for Formate Decomposition

Hydrogen bonding accelerates many catalytic reactions by orienting intermediates, stabilizing transition states, and even opening reaction pathways. However, most mechanistic studies regarding the decomposition of formic acid (FA), a promising hydrogen storage material, neglect hydrogen-bonding interactions even though FA is a strong hydrogen-bond donor and acceptor. Here, we probe the formation of bimolecular hydrogen-bonded complexes between FA and formate (FA–HCOO complexes) adsorbed on metal surfaces and how these complexes affect HCOO* decomposition. Using first-principles density functional theory (DFT) calculations on 12 close-packed (111)/(0001) and 8 open (100) surfaces of 12 transition metals—Ag, Au, Co, Cu, Ir, Ni, Os, Re, Pd, Pt, Rh, and Ru, we—show that FA–HCOO complexes are generally thermodynamically stable, even at elevated temperatures and pressures. We then illustrate that these complexes produce infrared spectroscopic signatures consistent with as yet unassigned experimental peaks. We last demonstrate that by stabilizing the dangling bond of monodentate HCOO*, these complexes significantly lower the barriers for rotation of HCOO* from a bidentate to a monodentate configuration, the rate-limiting step for HCOO* decomposition on many surfaces. FA thus acts as a cocatalyst for HCOO* decomposition. Our results may guide the community toward improved catalysts for reactions involving HCOO* such as FA decomposition, methanol steam reforming, and the water gas shift reaction. More broadly, our work highlights the ability of hydrogen bonding to modify the adsorbed structures of intermediates and lower the barriers for their reaction on heterogeneous catalysts. Lastly, this phenomenon can be relevant for other reactions involving ammonia, alcohols, and carboxylic acids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reaction mechanism of dimethyl ether carbonylation to methyl acetate over mordenite – a combined DFT/experimental study

The reaction mechanism of dimethyl ether carbonylation to methyl acetate over mordenite was studied theoretically with periodic density functional theory calculations including dispersion forces and experimentally in a fixed bed flow reactor at pressures between 10 and 100 bar, dimethyl ether concentrations in CO between 0.2 and 2.0%, and at a temperature of 438 K. The theoretical study showed that the reaction of CO with surface methyl groups, the rate-limiting step, is faster in the eight-membered side pockets than in the twelve-membered main channel of the zeolite; the subsequent reaction of dimethyl ether with surface acetyl to form methyl acetate was demonstrated to occur with low energy barriers in both the side pockets and in the main channel. Here, the present analysis has thus identified a path, where the entire reaction occurs favourably on a single site within the side pocket, in good agreement with previous experimental studies. The experimental study of the reaction kinetics was consistent with the theoretically derived mechanism and in addition revealed that the methyl acetate product inhibits the reaction – possibly by sterically hindering the attack of CO on the methyl groups in the side pockets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Two-step Laser Time-of-Flight Mass Spectrometry to Elucidate Organic Diversity in Planetary Surface Materials.

Laser desorption/ionization time-of-flight mass spectrometry (LD-TOF-MS) holds promise to be a low-mass, compact in situ analytical capability for future landed missions to planetary surfaces. The ability to analyze a solid sample for both mineralogical and preserved organic content with laser ionization could be compelling as part of a scientific mission pay-load that must be prepared for unanticipated discoveries. Targeted missions for this instrument capability include Mars, Europa, Enceladus, and small icy bodies, such as asteroids and comets.

Europa↗

A hybrid topological quantum state in an elemental solid

Topology and interactions are foundational concepts in the modern understanding of quantum matter. Their nexus yields three important research directions: (1) the competition between distinct interactions, as in several intertwined phases, (2) the interplay between interactions and topology that drives the phenomena in twisted layered materials and topological magnets, and (3) the coalescence of several topological orders to generate distinct novel phases. The first two examples have grown into major areas of research, although the last example remains mostly unexplored, mainly because of the lack of a material platform for experimental studies. Here, using tunnelling microscopy, photoemission spectroscopy and a theoretical analysis, we unveil a ‘hybrid’ topological phase of matter in the simple elemental-solid arsenic. Through a unique bulk-surface-edge correspondence, we uncover that arsenic features a conjoined strong and higher-order topology that stabilizes a hybrid topological phase. Although momentum-space spectroscopy measurements show signs of topological surface states, real-space microscopy measurements unravel a unique geometry of topologically induced step-edge conduction channels revealed on various natural nanostructures on the surface. Using theoretical models, we show that the existence of gapless step-edge states in arsenic relies on the simultaneous presence of both a non-trivial strong Z 2 invariant and a non-trivial higher-order topological invariant, which provide experimental evidence for hybrid topology. Finally, our study highlights pathways for exploring the interplay of different band topologies and harnessing the associated topological conduction channels in engineered quantum or nano-devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Survey of Terrestrial Approaches to the Challenge of Lunar Dust Containment

Numerous technical challenges exist to successfully extend lunar surface exploration beyond the tantalizing first steps of Apollo. Among these is the challenge of lunar dust intrusion into the cabin environment. Addressing this challenge includes the design of barriers to intrusion as well as techniques for removing the dust from the cabin atmosphere. Opportunities exist for adapting approaches employed in dusty industrial operations and pristine manufacturing environments to cabin environmental quality maintenance applications. A survey of process technologies employed by the semiconductor, pharmaceutical, food processing, and mining industries offers insight into basic approaches that may be suitable for adaptation to lunar surface exploration applications.

Aguilera, Tatiana↗

Pulsed Lidar Measurements of Atmospheric CO2 Column Absorption and Range During the ASCENDS 2009-2011 Airborne Campaigns

We have developed a pulsed lidar technique for measuring the tropospheric CO2 concentrations as a candidate for NASA's ASCENDS mission and have demonstrated the CO2 and O2 measurements from aircraft. Our technique uses two pulsed lasers allowing simultaneous measurement of a single CO2 absorption line near 1572 nm, O2 extinction in the Oxygen A-band, surface height and backscatter profile. The lasers are stepped in wavelength across the CO2 line and an O2 line doublet during the measurement. The column densities for the CO2 and O2 are estimated from the differential optical depths (DOD) of the scanned absorption lines via the IPDA technique. For the 2009 ASCENDS campaign we flew the CO2 lidar only on a Lear-25 aircraft, and measured the absorption line shapes of the CO2 line using 20 wavelength samples per scan. Measurements were made at stepped altitudes from 3 to 12.6 km over the Lamont OK, central Illinois, North Carolina, and over the Virginia Eastern Shore. Although the received signal energies were weaker than expected for ASCENDS, clear C02 line shapes were observed at all altitudes. Most flights had 5-6 altitude steps with 200-300 seconds of recorded measurements per step. We averaged every 10 seconds of measurements and used a cross-correlation approach to estimate the range to the scattering surface and the echo pulse energy at each wavelength. We then solved for the best-fit CO2 absorption line shape, and calculated the DOD of the fitted CO2 line, and computed its statistics at the various altitude steps. We compared them to CO2 optical depths calculated from spectroscopy based on HITRAN 2008 and the column number densities calculated from the airborne in-situ readings. The 2009 measurements have been analyzed in detail and they were similar on all flights. The results show clear CO2 line shape and absorption signals, which follow the expected changes with aircraft altitude from 3 to 13 km. They showed the expected nearly the linear dependence of DOD vs altitude. The measurements showed -1 ppm random errors for 8-10 km altitudes and -30 sec averaging times. For the 2010 ASCENDS campaigns we flew the CO2 lidar on the NASA DC-8 and added an O2 lidar channel. During July 2010 we made measurements of CO2 and O2 column absorption during longer flights over Railroad Valley NV, the Pacific Ocean and over Lamont OK. CO2 measurements were made with 30 steps/scan, 300 scans/sec and improved line resolution and receiver sensitivity. Analysis of the 2010 CO2 measurements shows the expected -linear change of DOD with altitude. For measurements at altitudes> 6 km the random errors were 0.3 ppm for 80 sec averaging times. For the summer 2011 ASCENDS campaigns we made further improvements to the lidar's CO2 line scan and receiver sensitivity. The seven flights in the 2011 Ascends campaign were flown over a wide variety of surface and cloud conditions in the US, which produced a wide variety of lidar signal conditions. Details of the lidar measurements and their analysis will be described in the presentation.

Abshire, J. B.↗

Validation of Pin Span Superposition to Reconstruct Gridded Bundle Flows

This milestone shows a demonstration of the surface map model to map the surface temperature for single-phase computational fluid dynamics simulation data from STAR-CCM+ to the subchannel code CTF using a two-step process that captures global and local rod surface temperature behavior based on simulation boundary conditions and position. This model can be used to improve results from CTF by transforming surface temperatures obtained from CTF to model data that resembles data from STAR-CCM+. A summary of the current two-step model process and results of the initial investigations with a single subchannel and a 5 x 5 set of fuel rods are shown and discussed within, with suggestions for further improvements.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Satellite and Surface Data Synergy for Developing a 3D Cloud Structure and Properties Characterization Over the ARM SGP. Stage 1: Cloud Amounts, Optical Depths, and Cloud Heights Reconciliation

One of the primary Atmospheric Radiation Measurement (ARM) Program objectives is to obtain measurements applicable to the development of models for better understanding of radiative processes in the atmosphere. We address this goal by building a three-dimensional (3D) characterization of the cloud structure and properties over the ARM Southern Great Plains (SGP). We take the approach of juxtaposing the cloud properties as retrieved from independent satellite and ground-based retrievals, and looking at the statistics of the cloud field properties. Once these retrievals are well understood, they will be used to populate the 3D characterization database. As a first step we determine the relationship between surface fractional sky cover and satellite viewing angle dependent cloud fraction (CF). We elaborate on the agreement intercomparing optical depth (OD) datasets from satellite and ground using available retrieval algorithms with relation to the CF, cloud height, multi-layer cloud presence, and solar zenith angle (SZA). For the SGP Central Facility, where output from the active remote sensing cloud layer (ARSCL) valueadded product (VAP) is available, we study the uncertainty of satellite estimated cloud heights and evaluate the impact of this uncertainty for radiative studies.

Genkova, I.↗

Surface alloy model of p(2×2)Sb/Cu(001) from LEED I/V data

AWe report on the re-determination of the structure of p(2 2)Sb/Cu(001) from measured LEED I/V data. The structure solution is performed in two steps. First an approximate image of the surface structure model is found by an application to the measured data of the recently-proposed Phase and Amplitude Recovery and Diffraction Image Generation Method (PARADIGM). This reveals that the p(2 2) structure is formed by the protrusion of one atom out of four in the outermost surface layer. Since an Sb atom is larger than one of Cu, this suggests a possibility that the p(2 2) structure is formed by Sb substitution for one out of four Cu atoms in the outermost layer. Second, a tensor LEED refinement of the model suggested by the PARADIGM yields the same dominant top-layer substitutional model proposed in the earlier LEED study, but with a much lower reliability factor, making much less likely an admixture of other surface phases.

36 MATERIALS SCIENCE↗