Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface steps”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Surface Functionalized Barium Titanate Nanoparticles: A Combined Experimental and Computational Study

Barium titanate (BTO) nanoparticles show great potential for use in electrostatic capacitors with high energy density. This includes both polymer composite and sintered capacitors. However, questions about the nanoparticles' size distribution, amount of agglomeration, and surface ligand effect on performance properties remain. Reducing particle agglomeration is a crucial step to understanding the properties of nanoscale particles, as agglomeration has significant effects on the composite dielectric constant. BTO surface functionalization using phosphonic acids is known reduce BTO nanoparticle agglomeration. We explore solution synthesized 10 nm BTO particles with tert-butylphosphonic acid ligands. Recent methods to quantifying agglomeration using an epoxy matrix before imaging shows that tert-butylphosphonic acid ligands reduce BTO agglomeration by 33%. Thermometric, spectroscopic, and computational methods provide confirmation of ligand binding and provide evidence of multiple ligand binding modes on the BTO particle surface.

36 MATERIALS SCIENCE↗

Twins and their boundaries during homoepitaxy on Ir(111)

The growth and annealing behavior of strongly twinned homoepitaxial films on Ir(111) have been investigated by scanning tunneling microscopy, low-energy electron diffraction, and surface x-ray diffraction. In situ surface x-ray diffraction during and after film growth turned out to be an efficient tool for the determination of twin fractions in multilayer films and to unravel the nature of lateral twin crystallite boundaries. The annealing of the twin structures is shown to take place in a two-step process; first, the length of the lateral twin crystallite boundaries is reduced, without affecting the amount of twinned material, and then, at much higher temperatures, the twins themselves anneal. Within moderately annealed films lateral twin crystallite boundaries are visible at the film surface as fractional steps from which strain fields extend. The nature of these boundaries is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An MPI + $X$ implementation of contact global search using Kokkos

This paper describes an approach that seeks to parallelize the spatial search associated with computational contact mechanics. In contact mechanics, the purpose of the spatial search is to find “nearest neighbors,” which is the prelude to an imprinting search that resolves the interactions between the external surfaces of contacting bodies. In particular, we are interested in the contact global search portion of the spatial search associated with this operation on domain-decomposition-based meshes. Specifically, we describe an implementation that combines standard domain-decomposition-based MPI-parallel spatial search with thread-level parallelism (MPI-X) available on advanced computer architectures (those with GPU coprocessors). Our goal is to demonstrate the efficacy of the MPI-X paradigm in the overall contact search. Standard MPI-parallel implementations typically use a domain decomposition of the external surfaces of bodies within the domain in an attempt to efficiently distribute computational work. This decomposition may or may not be the same as the volume decomposition associated with the host physics. The parallel contact global search phase is then employed to find and distribute surface entities (nodes and faces) that are needed to compute contact constraints between entities owned by different MPI ranks without further inter-rank communication. Key steps of the contact global search include computing bounding boxes, building surface entity (node and face) search trees and finding and distributing entities required to complete on-rank (local) spatial searches. To enable source-code portability and performance across a variety of different computer architectures, we implemented the algorithm using the Kokkos hardware abstraction library. While we targeted development towards machines with a GPU accelerator per MPI rank, we also report performance results for OpenMP with a conventional multi-core compute node per rank. Results here demonstrate a 47 % decrease in the time spent within the global search algorithm, comparing the reference ACME algorithm with the GPU implementation, on an 18M face problem using four MPI ranks. As a result, while further work remains to maximize performance on the GPU, this result illustrates the potential of the proposed implementation.

97 MATHEMATICS AND COMPUTING↗

Local step-flow dynamics in thin film growth with desorption

Desorption of deposited species plays a role in determining the evolution of surface morphology during crystal growth when the desorption time constant is short compared with the time to diffuse to a defect site, step edge, or kink. However, experiments to directly test the predictions of these effects are lacking. Novel techniques such as in situ coherent x-ray scattering can provide significant new information. Herein we present x-ray photon correlation spectroscopy (XPCS) measurements during diindenoperylene (DIP) vapor deposition on thermally oxidized silicon surfaces. DIP forms a nearly complete two-dimensional first layer over the range of temperatures studied (40–120 ⁢°C), followed by mounded growth during subsequent deposition. Local step flow within mounds was observed, and we find that there was a terrace-length-dependent behavior of the step edge dynamics. This led to unstable growth with rapid roughening (β>0.5) and deviation from a symmetric error-function-like height profile. At high temperatures, the grooves between the mounds tend to close up leading to nearly flat polycrystalline films. In conclusion, numerical analysis based on a (1+1)-dimensional model suggests that terrace-length dependent desorption of deposited ad-molecules is an essential cause of the step dynamics, and it influences the morphology evolution.

36 MATERIALS SCIENCE↗

Deoxidation of Ti Melt by Newly Developed Two-Step Plasma Arc Melting Process Using Hydrogen

A two-step plasma arc melting process, comprising a first step under Ar-30 pct H{sub 2} gas flow and the second step under Ar gas flow, has been newly developed for the deoxidation of Ti melts. The oxygen content after this process depended on the depth probed in the Ti melt. Decrease in the oxygen content from 1.5 to 0.7 mass pct in the surface region of the Ti melt occurred in the second step.

36 MATERIALS SCIENCE↗

Single-Atom Doping at the Molecule–Metal Interface: How Rh Affects Surface Explosion Kinetics

Controlling chemical reactions at interfaces is central to many fields, including atmospheric, environmental, and biological chemistry as well as catalysis and corrosion. We performed a fundamental study of how catalytically active Rh atoms placed at and above a molecule-metal interface influence the surface reaction kinetics of tartaric acid (TA) decomposition. Specifically, TA decomposition on Cu(100) exhibits autocatalytic decomposition kinetics involving a slow initiation step followed by fast decomposition of the molecular layer. These so-called “surface explosions” are extremely sensitive to initial conditions, making it fundamentally interesting to study how the placement of reactive atoms affects the reaction rate. Temperature-programmed reaction (TPR) experiments reveal that Rh atoms embedded in the Cu(100) surface beneath TA (TA/Rh/Cu) or atop the TA layer (Rh/TA/Cu) reduce the decomposition temperature and modify the reaction rate constants. Isothermal TPR analysis reveals that Rh enhances both the initiation rate constant, k i , and the explosion rate constant, k e , facilitating explosive decomposition at lower temperatures. This result provides evidence that both the initiation and explosion steps occur at the metal-molecule interface and are accelerated by the presence of Rh at this interface. This study illustrates how small amounts of reactive elements may be used to control nonlinear kinetic processes at interfaces.

desorption↗

Plasma treatment of bulk niobium surface for superconducting rf cavities: Optimization of the experimental conditions on flat samples

Accelerator performance, in particular the average accelerating field and the cavity quality factor, depends on the physical and chemical characteristics of the superconducting radio-frequency (SRF) cavity surface. Plasma based surface modification provides an excellent opportunity to eliminate nonsuperconductive pollutants in the penetration depth region and to remove the mechanically damaged surface layer, which improves the surface roughness. Here we show that the plasma treatment of bulk niobium (Nb) presents an alternative surface preparation method to the commonly used buffered chemical polishing and electropolishing methods. We have optimized the experimental conditions in the microwave glow discharge system and their influence on the Nb removal rate on flat samples. We have achieved an etching rate of 1.7 μm/min⁡ using only 3% chlorine in the reactive mixture. Combining a fast etching step with a moderate one, we have improved the surface roughness without exposing the sample surface to the environment. We intend to apply the optimized experimental conditions to the preparation of single cell cavities, pursuing the improvement of their rf performance.

43 PARTICLE ACCELERATORS↗

Plasma Treatment of Bulk Niobium Surface for SRF Cavities - Optimization of the Experimental Conditions on Flat Samples

Accelerator performance, in particular the average accelerating field and the cavity quality factor, depends on the physical and chemical characteristics of the superconducting radio-frequency (SRF) cavity surface. Plasma based surface modification provides an excellent opportunity to eliminate non-superconductive pollutants in the penetration depth region and to remove mechanically damaged surface layer improving surface roughness. Here we show that plasma treatment of bulk Nb presents surface preparation method alternative to the commonly used BCP and EP methods. We have optimized the experimental conditions in the microwave glow discharge system and their influence on the Nb removal rate on the flat samples. We have achieved etching rates of 1.5 micro-m/min using only 3% Cl2 in the reactive mixture. Combining fast etching step with the moderate one, we have improved a surface roughness without exposing fresh sample surface to the environment. We will apply optimized experimental conditions to single cell cavities, in pursuing improvement of their RF performance.

Raskovic, Marija↗

Effects of surface species and homogeneous reactions on rates and selectivity in ethane oxidation on oxide catalysts

Selective alkane oxidations on metal oxide catalysts involve complex mechanisms with multiple reactions in series and parallel, different types of reduced and oxidized surface species, and potential contributions from gas-phase reactions. We report kinetics and thermodynamics of elementary steps involved in C 2 H 6 -O 2 reactions on SiO 2 -supported small vanadium oxide domains are determined using density functional theory. These surface reactions together with gas-phase mechanisms are incorporated in kinetic simulations to determine how surface and gaseous reactions interact and contribute to rates and selectivity. The results show that gas-phase reactions within pore volumes in contact with the catalyst contribute significantly to C 2 H 6 activation rates, even at conditions where gas-phase reactions in empty volumes without catalyst are negligible. The majority of C 2 H 6 activations occur on the surface, via H abstraction by vanadium oxo species present at terminal lattice oxygens. The gas-phase activations via H-abstraction by OH radicals also exhibit significant contributions. The reduced centers formed by reactions at vanadium oxo species are re-oxidized rapidly and, therefore, are present in very small concentrations at reaction conditions. The re-oxidation steps lead to the formation of HO 2 radicals and surface peroxo species that are also rapidly consumed and are present in small concentrations. The peroxo species preferentially convert C 2 H 4 to its epoxide product and influence selectivity even at low concentrations. The gas-phase reactions decrease the concentrations of peroxo species and improve selectivity slightly. The effects of reaction conditions and catalyst site density provide further insights into how factors beyond conversions at lattice oxygens influence rates and selectivity in alkane oxidation reactions of significant industrial importance.

42 ENGINEERING↗

Interactions of Aqueous Surface Treatments with Magnesium Alloy

Magnesium, the lightest structural metal, has recently been identified as an important substrate for weight reduction in automotive, aerospace, personal electronics, and many other industries. Magnesium’s unique chemistry, however, makes it challenging to protect from corrosion and incorporate with other materials. Cleaners are the first step in any pretreatment process, and understanding their role in surface preparation for corrosion prevention is crucial to making magnesium substrate a viable solution for lightweighting. In this work, we explore the relationship between cleaner composition, pH, etch rate, and panel morphology post-cleaning to understand how various cleaners interact with magnesium alloy. Our findings broaden the pool of possible bath chemistries that provide safe and effective surface cleaning of magnesium substrate.

Harris, Rachel↗

Two-step growth of two-dimensional WSe 2 /MoSe 2 heterostructures

Two dimensional (2D) materials have attracted great attention due to their unique properties and atomic thickness. Although various 2D materials have been successfully synthesized with different optical and electrical properties, a strategy for fabricating 2D heterostructures must be developed in order to construct more complicated devices for practical applications. Here we demonstrate for the first time a two-step chemical vapor deposition (CVD) method for growing transition-metal dichalcogenide (TMD) heterostructures, where MoSe 2 was synthesized first and followed by an epitaxial growth of WSe 2 on the edge and on the top surface of MoSe 2 . Compared to previously reported one-step growth methods, this two-step growth has the capability of spatial and size control of each 2D component, leading to much larger (up to 169 μm) heterostructure size, and cross-contamination can be effectively minimized. Furthermore, this two-step growth produces well-defined 2H and 3R stacking in the WSe 2 /MoSe 2 bilayer regions and much sharper in-plane interfaces than the previously reported MoSe 2 /WSe 2 heterojunctions obtained from one-step growth methods. The resultant heterostructures with WSe 2 /MoSe 2 bilayer and the exposed MoSe 2 monolayer display rectification characteristics of a p-n junction, as revealed by optoelectronic tests, and an internal quantum efficiency of 91% when functioning as a photodetector. As a result, a photovoltaic effect without any external gates was observed, showing incident photon to converted electron (IPCE) efficiencies of approximately 0.12%, providing application potential in electronics and energy harvesting.

2D heterostructures↗

Characterization of hydrogen-plasma interactions with photoresist, silicon, and silicon nitride surfaces

For the 45 nm technology node and beyond, a major challenge is to achieve reasonably high photoresist ash rates while minimizing the loss of the silicon (Si) substrate and its nitride (Si{sub 3}N{sub 4}). Accordingly, an objective of this work is to characterize the photoresist strip rate under varying conditions of H{sub 2} plasma and the effects of these conditions on Si and Si{sub 3}N{sub 4} etch rates. In addition, we discuss in detail the fundamental mechanisms of the reactions between H atoms and the above substrates and successfully reconcile the process trends obtained with the reaction mechanisms. In this work, photoresist, Si, and Si{sub 3}N{sub 4} films were exposed to downstream pure-H{sub 2} discharges and their removal rates were characterized by ellipsometry as a function of the following parameters: substrate temperature, reactor pressure, H{sub 2} flow rate, and source power. The authors found that the H{sub 2}-based dry ash and Si{sub 3}N{sub 4} etch are both thermally activated reactions, evidenced by the steady increase in etch rate as a function of temperature, with activation energies of {approx}5.0 and {approx}2.7 kcal/mol, respectively. The Si substrate exhibits a rather unique behavior where the etch rate increases initially to a maximum, which occurs at {approx}40 deg. C, and then decreases upon a further increase in temperature. The decrease in the Si etch rate at higher temperatures is attributed to the activation of competing side reactions that consume the chemisorbed H atoms on the Si surface, which then suppresses the Si-etch step. The photoresist and Si{sub 3}N{sub 4} removal rates increase initially with increasing pressure, reaching maxima at {approx}800 and 2000 mTorr, respectively, beyond which the removal rates drop with increasing pressure. The initial increase in removal rate at the low-pressure regime is attributed to the increased atomic-hydrogen density, whereas the decrease in ash rate at the high-pressure regime could be attributed to the recombination of H atoms that could occur by various mechanisms. At temperatures where the reaction rates are relatively fast, the photoresist and Si removal rates both increase continuously with the H{sub 2} flow rate, indicating that both reactions are in the supply-limited regime. For the range of process conditions explored here, we find that the etch rates of Si are generally much higher than those for Si{sub 3}N{sub 4} with Si:Si{sub 3}N{sub 4} etch-rate ratios that vary from 25 to >>520. Based on the process trends obtained here, we have identified a process window--high temperature and intermediate pressure--that attains relatively high photoresist ash rates and low Si and Si{sub 3}N{sub 4} etch rates.

36 MATERIALS SCIENCE↗

Trace explosives sampling for security applications (TESSA) study: Evaluation of procedures and methodology for contact sampling efficiency

We report the detection of trace amounts of explosive materials is critical to the security at mass transit centers (e.g., airports and railway stations). In a typical screening process, a trap is used to probe a surface of interest to collect and transfer particulate residue to a detector for analysis. The collection of residues from the surface being probed is widely viewed as the limiting step in this process. A multi-institutional study was performed to establish a methodology for the evaluation of sampling media collection efficiencies. Dry deposited residues of 1,3,5-trinitroperhydro-1,3,5-triazine (RDX), C-4 (an RDX-based explosive), and pentaerythritol tetranitrate (PETN) were harvested from acrylonitrile butadiene styrene (ABS) plastic, ballistic nylon (NYL), and uncoated aluminum surfaces using muslin, Texwipe cotton, and stainless-steel mesh traps. Transfer and collection efficiencies of the sample media were calculated based on liquid chromatography-mass spectrometry analysis. Dry transfer efficiencies (DTE%) to all tested surfaces were greater than 75%, with transfer to ABS plastic being the lowest. Collection efficiency (CE%) varied significantly across the traps and the surfaces, yet some conclusions can be drawn; nylon had the lowest CE% for all cases (~10%), and the stainless steel mesh had the lowest CE% for the evaluated traps (~20%). Though the testing parameters have been standardized among the participants to establish a framework for an independent comparison of contact sampling media and surfaces, substantial variations in the DTE% and the CE% were observed, suggesting that other variables can affect contact sampling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Flow cytometry-based methods for assessing soluble scFv activities and detecting pathogen antigens in solution

Novel methods are reported for evaluating and utilizing single chain fragment variable (scFv) antibodies derived from yeast-display libraries. Yeast-display was used to select scFv specific to invariant surface glycoproteins (ISG) of Trypanosoma brucei. A limiting step in the isolation of scFv from nonimmune libraries is the conversion of highly active yeast-displayed scFv into soluble antibodies that can be used in standard immunoassays. Challenges include limited solubility or activity following secretion and purification of scFv. For this reason, few scFv derived from yeast-display platforms have moved into development and implementation as diagnostic reagents. To address this problem, assays were developed that employ both yeastdisplayed and secreted scFv as analytical reagents. The first is a competitive inhibition flow cytometry (CIFC) assay that detects secreted scFv by virtue of its ability to competitively inhibit the binding of biotinylated antigen to yeast-displayed scFv. The second is an epitope binning assay that uses secreted scFv toidentify additional yeast-displayed scFv that bind nonoverlapping or noncompeting epitopes on an antigen. The epitope binning assay was used not only to identify sandwich assay pairs with yeast-displayed scFv, but also to identify active soluble scFv present in low concentration in a crude expression extract. Finally, a CIFC assay was developed that bypasses entirely the need for soluble scFv expression, by using yeast displayed scFv to detect unlabeled antigen in samples. These methods will facilitate the continued development and practical implementation of scFv derived from yeast-display libraries.

59 BASIC BIOLOGICAL SCIENCES↗

Visualization of Plasmonic Couplings Using Ultrafast Electron Microscopy

Hybrids of graphene and metal plasmonic nanostructures are promising building blocks for applications in optoelectronics, surface-enhanced scattering, biosensing, and quantum information. An understanding of the coupling mechanism in these hybrid systems is of vital importance to its applications. Previous efforts in this field mainly focused on spectroscopic studies of strong coupling within the hybrids with no spatial resolution. In this study, we report direct imaging of the local plasmonic coupling between single Au nanocapsules and graphene step edges at the nanometer scale by photon-induced near-field electron microscopy in an ultrafast electron microscope for the first time. The proximity of a step in the graphene to the nanocapsule causes asymmetric surface charge density at the ends of the nanocapsules. Computational electromagnetic simulations confirm the experimental observations. The results reported here indicate that this hybrid system could be used to manipulate the localized electromagnetic field on the nanoscale, enabling promising future plasmonic devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Density Functional Theory Study of Methanol Decomposition on the CeO 2 (110) Surface

Methanol decomposition on the stoichiometric CeO 2 (110) surface has been investigated using density functional theory slab calculations. Three possible initial steps to decompose methanol by breaking one of three bonds (O-H, C-O and C-H) of methanol were examined. The relative order of thermodynamic stability for the three possible bond scission steps is: C-H > O-H > C-O. We further isolated transition state and determined activation energy for each bond-breaking mode using the nudged elastic method. The activation barrier for the most favorable dissociation mode, the O-H bond scission, is 0.3 eV on the (110) surface. An even lower activation barrier (< 0.1 eV) has been obtained on the CeO 2 (111) surface for the same bond-breaking mode. We aslo calculated the pre-exponential factors based on the harmonic approximation and obtained the overall rate constants at 300 and 500 K for all three initial decomposition steps. In contrast to the order of thermodynamic stability, the calculated bond breaking barriers indicated a different bond breaking order kinetically: O-H > C-O > C-H. Our results are consistent with the previous experimental observation that methoxy is the dominant surface species after a stoichiometric CeO 2 surface was exposed to methanol. The experimentally observed methanol chemistry was determined by the kinetics of initial dissociation steps rather than the thermodynamic stability of product states. Surface coverage of methanol was found to affect the relative stability between molecular and dissociative adsorption modes. Dissociative adsorption modes are preferred thermodynamically for methanol coverage up to 0.5 ML but only molecular adsorption was stable at full monolayer coverage. This work was supported by a Laboratory Directed Research and Development (LDRD) project of the Pacific Northwest National Laboratory (PNNL). The computations were performed using the Molecular Science Computing Facility in the William R. Wiley Environmental Molecular Sciences Laboratory (EMSL), which is a U.S. Department of Energy national scientific user facility located at PNNL in Richland, Washington. Computing time was made under a Computational Grand Challenge “Computational Catalysis”. Part of the computing time was also granted by the National Energy Research Scientific Computing Center (NERSC).

10 SYNTHETIC FUELS↗

Spatial modulation of in-plane magnetic anisotropy in epitaxial Co(111) films grown on macrostep-bunched Si(111)

We compared magnetic properties of epitaxial Co(111) films grown on microstep- and macrostep-bunched vicinal Si(111) substrates. A surface of the microstep-bunched Si(111) substrate represents regular array of step-bunches with height of 1.7 nm divided from each other by flat microterraces with a width of 34 nm. A surface of the macrostep-bunched Si(111) substrate is constituted by macrostep bunches with a height of 75–85 nm divided by atomically flat macroterraces. The average sum width of a macrostep bunch and a macroterrace is 2.3 μm. While in-plane magnetic anisotropy was spatially uniform in Co(111) films grown on the microstep-bunched Si(111), periodic macromodulation of the topography of the Si(111) substrate induced spatial modulation of in-plane magnetic anisotropy in Co(111) film grown on the macrostep-bunched Si(111) surface. The energy of uniaxial magnetic anisotropy in the areas of the Co(111) film deposited on the Si(111) macrosteps was higher more than by the order of magnitude than the energy of the magnetic anisotropy in the areas grown on macroterraces. Magnetization reversal in the areas with different energy of the magnetic anisotropy occurred in different magnetic fields. We showed the possibility of obtaining high density of domain walls in Co(111) film grown on the macrostep-bunched Si(111) by tuning the spatial step density of the Si(111) substrate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Methanol Oxidation to Formaldehyde Promoted at the Step Sites of Ultrathin ZnO

Adsorption and oxidation of methanol on ultrathin ZnO layers supported on Au(111) have been investigated using temperature programmed reaction spectroscopy (TPRS) and density functional theory (DFT) calculations. In the TPRS experiments, following adsorption of methanol- 18 O at T = 100 K, only molecular methanol- 18 O desorbed from the planar ZnO bilayer surface at T = 220 and 260 K, whereas a partial oxidation product, formaldehyde- 18 O (~95% selectivity), and a small amount of carbon dioxide (C 16 O 18 O) were produced at T = 580 K at the bilayer–trilayer step sites. The DFT calculations were used to identify the adsorption configurations of methanol on the planar ZnO surface and at the step sites, as well as the reaction pathways to gaseous formaldehyde. The most stable adsorption configuration corresponds to methanol molecule adsorbed at the bilayer–trilayer step sites with its C–O axis parallel to the upper terrace edge, forming a bond between its O atom and a Zn site on the lower terrace, and also a hydrogen bond between its H atom in the OH group and a lattice O anion at the upper terrace edge. Starting from the most stable adsorption configuration at the step sites, formation of gaseous formaldehyde was found to take place preferentially via a methoxy (CH 3 O(ad)) intermediate. This process follows the pathways CH 3 OH(ad) → CH 3 O(ad) + H(ad) → CH 2 O(g) + 2H(ad) and has an overall barrier of 19.0 kcal/mol. The reaction pathway to produce a lattice O-bonded formaldehyde (H 2 COOlattice(ad)), the proposed precursor leading to CO 2 , was found to be energetically less favorable with a barrier of ~38 kcal/mol. As a result, the preference to produce gaseous formaldehyde from the DFT calculations agrees well with the high selectivity toward formaldehyde observed in the TPRS experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗