Search NASA⌕ Search

SEARCH · Search NASA

Results for “variable free”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

MULTIWAVELENGTH OBSERVATIONS OF THE PREVIOUSLY UNIDENTIFIED BLAZAR RX J0648.7+1516

We report on the VERITAS discovery of very high energy (VHE) gamma-ray emission above 200 GeV from the high-frequency-peaked BL Lac (HBL) object RX J0648.7+1516 (GB J0648+1516), associated with 1FGL J0648.8+1516. The photon spectrum above 200 GeV is fitted by a power law dN/dE = F{sub 0}(E/E{sub 0}){sup -{Gamma}} with a photon index {Gamma} of 4.4 {+-} 0.8{sub stat} {+-} 0.3{sub syst} and a flux normalization F{sub 0} of (2.3 {+-} 0.5{sub stat} {+-} 1.2{sub sys}) Multiplication-Sign 10{sup -11} TeV{sup -1} cm{sup -2} s{sup -1} with E{sub 0} = 300 GeV. No VHE variability is detected during VERITAS observations of RX J0648.7+1516 between 2010 March 4 and April 15. Following the VHE discovery, the optical identification and spectroscopic redshift were obtained using the Shane 3 m Telescope at the Lick Observatory, showing the unidentified object to be a BL Lac type with a redshift of z = 0.179. Broadband multiwavelength observations contemporaneous with the VERITAS exposure period can be used to subclassify the blazar as an HBL object, including data from the MDM observatory, Swift-UVOT, and X-Ray Telescope, and continuous monitoring at photon energies above 1 GeV from the Fermi Large Area Telescope (LAT). We find that in the absence of undetected, high-energy rapid variability, the one-zone synchrotron self-Compton (SSC) model overproduces the high-energy gamma-ray emission measured by the Fermi-LAT over 2.3 years. The spectral energy distribution can be parameterized satisfactorily with an external-Compton or lepto-hadronic model, which have two and six additional free parameters, respectively, compared to the one-zone SSC model.

79 ASTRONOMY AND ASTROPHYSICS↗

Development of an ultraprecise glue-free bimorph deformable mirror with a length of 460 mm

Lead zirconate titanate (PZT) bimorph mirrors are essential for performing multiple functions, such as beam shaping, wavefront correction, and dynamic focusing with adjustable beam sizes. They typically consist of a mirror substrate with PZT electrodes bonded to the substrate using a thin epoxy film. However, glue-bonded PZT mirrors exhibit low reproducibility in measurement results. One source of this variability is water absorption by the substrate’s epoxy adhesive during wet fabrication processes, such as elastic emission machining (EEM), which leads to swelling and deformation. Additionally, longer deformable bimorph mirrors require larger PZT electrodes, further complicating their design and fabrication, particularly during bonding and ultraprecise metrology. To address these challenges, silver nanoparticles were employed to bond PZT elements to the silicon (Si) mirror, eliminating the need for epoxy glue. Here, in this study, we developed an inorganic-glue-free PZT bimorph mirror with a length of 460 mm and 28 channels. The glue-free bonding method successfully ensured the high reproducibility of measurements after water immersion. This approach resulted in a shape error of only 0.41 nm root mean square after the figure correction process using an ultraprecise EEM process. Scanning acoustic tomography and basic response function tests confirmed the success of the bonding process, showing no critical voids. Furthermore, the shape changes induced by applying voltages to the PZT electrodes closely matched predictions obtained from simulations. These results demonstrate the reliability and precision of the proposed glue-free bonding technique, paving the way for improved performance of new PZT bimorph mirrors.

Ichii, Yoshio [SLAC National Accelerator Laborator↗

ALESQP: An Augmented Lagrangian Equality-Constrained SQP Method for Optimization with General Constraints

Here we present a new algorithm for infinite-dimensional optimization with general constraints, called ALESQP. In short, ALESQP is an augmented Lagrangian method that penalizes inequality constraints and solves equality-constrained nonlinear optimization subproblems at every iteration. The subproblems are solved using a matrix-free trust-region sequential quadratic programming (SQP) method that takes advantage of iterative, i.e., inexact linear solvers, and is suitable for large-scale applications. A key feature of ALESQP is a constraint decomposition strategy that allows it to exploit problem-specific variable scalings and inner products. We analyze convergence of ALESQP under different assumptions. We show that strong accumulation points are stationary. Consequently, in finite dimensions ALESQP converges to a stationary point. In infinite dimensions we establish that weak accumulation points are feasible in many practical situations. Under additional assumptions we show that weak accumulation points are stationary. We present several infinite-dimensional examples where ALESQP shows remarkable discretization-independent performance in all of its iterative components, requiring a modest number of iterations to meet constraint tolerances at the level of machine precision. Also, we demonstrate a fully matrix-free solution of an infinite-dimensional problem with nonlinear inequality constraints.

97 MATHEMATICS AND COMPUTING↗

Catalytic N 2 Reduction to Silylamines and Thermodynamics of N 2 Binding at Square Planar Fe

The geometric constraints imposed by a tetradentate P4N2 ligand play an essential role in stabilizing square planar Fe complexes with changes in metal oxidation state. A combination of high-pressure electrochemistry and variable temperature UV-vis spectroscopy were used to obtain these thermodynamic measurements, while X-ray crystallography, 57Fe Mössbauer spectroscopy, and EPR spectroscopy were used to fully characterize these new compounds. Analysis of Fe0, FeI, and FeII complexes reveals that the free energy of N2 binding across three oxidation states spans more than 37 kcal mol-1. The square pyramidal Fe0(N2)(P4N2) complex catalyzes the conversion of N2 to N(SiR3)3 (R = Me, Et) at room temperature, representing the highest turnover number (TON) of any Fe-based N2 silylation catalyst to date (up to 65 equiv N(SiMe3)3 per Fe center). Elevated N2 pressures (> 1 atm) have a dramatic effect on catalysis, increasing N2 solubility and the thermodynamic N2 binding affinity at Fe0(N2)(P4N2). Acknowledgment. This research was supported as part of the Center for Molecular Electrocatalysis, an Energy Frontier Research Center funded by the U.S. Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences. EPR experiments were performed using EMSL, a national scientific user facility sponsored by the DOE’s Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory (PNNL). PNNL is operated by Battelle for the U.S. DOE. Computational resources were provided by the National Energy Research Scientific Computing Center (NERSC) at Lawrence Berkeley National Laboratory. The authors thank Prof. Yisong Alex Guo at Carnegie Mellon University for recording Mössbauer data for some complexes and Emma Wellington and Kaye Kuphal for their assistance with the collection of Mössbauer data at Colgate University, Dr. Katarzyna Grubel for X-ray assistance, and Dr. Rosalie Chu for mass spectrometry assistance. The authors also thank Dr. Aaron Appel and Dr. Alex Kendall for helpful discussions.

iron, thermodynamics, dinitrogen, square planer, M↗

Thermoelastic analysis of a silicon surface under x-ray free-electron-laser irradiation

We present an analysis of the time evolution of a highly excited silicon substrate after partial absorption of a femtosecond soft x-ray pulse. The detailed time-dependent thermoelastic behavior of the substrate in terms of the displacements u(r,t) is derived for time delays for which the usual local thermodynamic variables, temperature T(r,t) and density n(r,t), become well-defined, namely, a few hundred femtoseconds after x-ray pulse absorption. For practical optical components under present conditions of operation with trains of pulses, we find that in a worst case scenario, already the second pulse in the train could be adversely affected by dynamic thermal distortion induced by the preceding pulse.

36 MATERIALS SCIENCE↗

Field-effect transistor based on ZnO nanorods with a variable threshold cutoff voltage

This study is concerned with the fabrication and electrical characteristics of short-channel (2 {mu}m) field-effect transistors (FETs) based on ZnO nanorods. In FET fabrication, single-crystal ZnO nanorods are grown using the catalyst-free chemical vapor deposition (CVD) method. Although the short-channel ZnO-nanorod FETs exhibit good electrical characteristics (a transconductance of 100 nS, electron mobility of 6 cm{sup 2} V{sup -1} s{sup -1}, and a large turn-ON/OFF ratio of 10{sup 4}), their characteristics significantly depend on the length of the nanorods. The effect of the drain-source voltage on the threshold gate voltage is studied.

36 MATERIALS SCIENCE↗

Torque Teno Sus Virus 1: A Potential Surrogate Pathogen to Study Pig-Transmitted Transboundary Animal Diseases

Understanding the epidemiology and transmission dynamics of transboundary animal diseases (TADs) among wild pigs (Sus scrofa) will aid in preventing the introduction or containment of TADs among wild populations. Given the challenges associated with studying TADs in free-ranging populations, a surrogate pathogen system may predict how pathogens may circulate and be maintained within wild free-ranging swine populations, how they may spill over into domestic populations, and how management actions may impact transmission. We assessed the suitability of Torque teno sus virus 1 (TTSuV1) to serve as a surrogate pathogen for molecular epidemiological studies in wild pigs by investigating the prevalence, persistence, correlation with host health status and genetic variability at two study areas: Archbold’s Buck Island Ranch in Florida and Savannah River Site in South Carolina. We then conducted a molecular epidemiological case study within Archbold’s Buck Island Ranch site to determine how analysis of this pathogen could inform transmission dynamics of a directly transmitted virus. Prevalence was high in both study areas (40%, n = 190), and phylogenetic analyses revealed high levels of genetic variability within and between study areas. Our case study showed that pairwise host relatedness and geographic distance were highly correlated to pairwise viral genetic similarity. Molecular epidemiological analyses revealed a distinct pattern of direct transmission from pig to pig occurring within and between family groups. Our results suggest that TTSuV1 is highly suitable for molecular epidemiological analyses and will be useful for future studies of transmission dynamics in wild free-ranging pigs.

60 APPLIED LIFE SCIENCES↗

Over-Stoichiometric Metastabilization of Cation-Disordered Rock Salts

Cation-disordered rock salts (DRXs) are well known for their potential to realize the goal of achieving scalable Ni- and Co-free high-energy-density Li-ion batteries. Unlike in most cathode materials, the disordered cation distribution may lead to more factors that control the electrochemistry of DRXs. An important variable that is not emphasized by research community is regarding whether a DRX exists in a more thermodynamically stable form or a more metastable form. Moreover, within the scope of metastable DRXs, over-stoichiometric DRXs, which allow relaxation of the site balance constraint of a rock salt structure, are particularly underexplored. In this work, these findings are reported in locating a generally applicable approach to “metastabilize” thermodynamically stable Mn-based DRXs to metastable ones by introducing Li over-stoichiometry. Further, the over-stoichiometric metastabilization greatly stimulates more redox activities, enables better reversibility of Li deintercalation/intercalation, and changes the energy storage mechanism. The metastabilized DRXs can be transformed back to the thermodynamically stable form, which also reverts the electrochemical properties, further contrasting the two categories of DRXs. This work enriches the structural and compositional space of DRX families and adds new pathways for rationally tuning the properties of DRX cathodes.

25 ENERGY STORAGE↗

Fundamental investigations into the free‐radical copolymerization of N ‐phenylmaleimide and norbornene

ABSTRACT A fundamental investigation into the copolymerization of N ‐phenylmaleimide and norbornene via conventional free‐radical polymerization techniques was conducted. Reaction conditions were optimized for molecular weight and percent yield by tuning overall concentration and initiator loading. The copolymerization kinetics were monitored using in‐situ , variable temperature nuclear magnetic resonance and first‐order behavior was observed with respect to each monomer. Although the related copolymerization of norbornene and maleic anhydride was well‐known to proceed in a perfectly alternating manner, the copolymerization of norbornene and N ‐phenylmaleimide was found to deviate from strictly alternating copolymerization behavior, producing significant amounts of sequentially enchained N ‐phenylmaleimide units within the polymeric backbone. This deviation from perfectly alternating behavior was confirmed by analysis of individual monomer conversion rates and by measurement of monomer reactivity ratios using the Mayo–Lewis graphical analysis method. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54 , 985–991

Gmernicki, Kevin R.↗

A comparison of segmented abdominopelvic fluid volumes with conventional CT signs of abdominal compartment syndrome in a trauma population

Purpose: To compare the utility of abdominopelvic fluid volume measurements with established computed tomography signs for refractory post-traumatic abdominal compartment syndrome. Methods: This retrospective observational cohort study included 64 consecutive adult trauma patients with preoperative CT and diagnosis of refractory abdominal compartment syndrome requiring decompressive laparotomy at a level I trauma referral center between 2004 and 2014. We hypothesized that abdominal fluid volume measurements would be more predictive of the need for early laparotomy than previously described conventional CT signs of refractory ACS. Abdominopelvic fluid volumes were determined quantitatively using semi-automated segmentation software. The following conventional imaging parameters were recorded: abdominal anteroposterior:transverse ratio (round belly sign); infrahepatic vena cava diameter; distal abdominal aortic diameter; largest single small bowel wall diameter; hydronephrosis, inguinal herniation; and mesenteric and body wall edema. For outcome analysis, patients were stratified into two groups: those who underwent early (< 24 h) and late (≥ 24 h) decompressive laparotomy following CT. Correlation analysis, comparison of means, and multivariate logistic regression were performed. Results: Abdominal fluid volumes (p = 0.001) and anteroposterior:transverse ratio (p = 0.009) were increased and inferior vena cava diameter (p = 0.009) was decreased in the early decompressive laparotomy group. Multivariate analysis including conventional CT variables, fluid volumes, and laboratory values revealed abdominal fluid volumes (p = 0.012; Δ in log odds of 1.002/mL) as the only independent predictor of early decompressive laparotomy. Conclusions: Segmented abdominopelvic free fluid volumes had greater predictive utility for decision to perform early decompressive laparotomy than previously described ACS-related CT signs in trauma patients who developed refractory abdominal compartment syndrome.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Higher-order modification of Steffensen’s method for solving system of nonlinear equations

In this work, we propose a higher-order derivative free family for solving non-linear systems. The local order of convergence of the constructed family is first determined using first-order divided difference operators for functions of several variables and direct computation by Taylor’s series expansion. Computational efficiencies of the developed scheme is considered and compared with their closest competitors. Moreover, numerical experiments are performed on several large and complex non-linear systems. The results are found to be effective and comparable to other existing methods which also support the theoretical results.

97 MATHEMATICS AND COMPUTING↗

CP symmetry and thermal effects on Dirac bi-spinor spin–parity local correlations

Intrinsic quantum correlations supported by the SU(2)ⓍSU(2) structure of the Dirac equation used to describe particle/antiparticle states, optical ion traps and bilayer graphene are investigated and connected to the description of local properties of Dirac bi-spinors. For quantum states driven by Dirac-like Hamiltonians, quantum entanglement and geometric discord between spin and parity degrees of freedom – sometimes mapped into equivalent low energy internal degrees of freedom – are obtained. Such spin–parity quantum correlations and the corresponding nonlocal intrinsic structures of bi-spinor fermionic states can be classified in order to relate quantum observables to the (non)local behavior of these correlations. It is shown that free particle mixed states do not violate the Clauser–Horne–Shimony–Holt inequality: the correlations in such mixed bi-spinors, although quantum, can be reproduced by a suitable local hidden variable model. Additionally, the effects due to a non-minimal coupling to a homogeneous magnetic field, and to the inclusion of thermal effects are evaluated, and quantum correlations of associated quantum mixtures and of the thermal states are all quantified. The above-mentioned correlation quantifiers are then used to measure the influence of CP transformations on spin–parity quantum correlations, and our results show that quantum entanglement is invariant under CP transformations, although the geometric discord is highly sensitive to the CP symmetry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Predictive process mapping for laser powder bed fusion: A review of existing analytical solutions

One of the main challenges in the laser powder bed fusion (LPBF) process is making dense and defect-free components. These porosity defects are dependent upon the melt pool geometry and the processing conditions. Power-velocity (PV) processing maps can aid in visualizing the effects of LPBF processing variables and mapping different defect regimes such as lack-of-fusion, under-melting, balling, and keyholing. This work presents an assessment of existing analytical equations and models that provide an estimate of the melt pool geometry as a function of material properties. The melt pool equations are then combined with defect criteria to provide a quick approximation of the PV processing maps for a variety of materials. Finally, the predictions of these processing maps are compared with experimental data from the literature. Here, the predictive processing maps can be computed quickly and can be coupled with dimensionless numbers and high-throughput (HT) experiments for validation. The present work provides a boundary framework for designing the optimal processing parameters for new metals and alloys based on existing analytical solutions.

36 MATERIALS SCIENCE↗

A memory-distributed quasi-Newton solver for nonlinear programming problems with a small number of general constraints

We approach the problem of parallelizing state-of-the-art nonlinear programming optimization algorithms.Specifically, we focus on parallelizing quasi-Newton interior-point methods that use limited-memory secant Hessian approximations. Such interior-point methods are known to have better convergence properties and to be more effective on large-scale problems than gradient-based and derivative-free optimization algorithms. We target nonlinear and potentially nonconvex optimization problems with an arbitrary number of bound constraints and a small number of general equality and inequality constraints on the optimization variables. These problems occur for example in the form of optimal control, optimal design, and inverse problems governed by ordinary or partial differential equations, whenever they are expressed in a “reduced-space” optimization approach. We introduce and analyze the time and space complexity of a decomposition method for solving the quasi-Newton linear systems that leverages the fact that the quasi-Newton Hessian matrix has a small number of dense blocks that border a low-rank update of a diagonal matrix. This enables an efficient parallelization on memory-distributed computers of the iterations of the optimization algorithm, a state-of-the-art filter line-search interior-point algorithm by Wächter et. al. We illustrate the efficiency of the proposed method by solving structural topology optimization problems on up to 4608 cores on a parallel machine.

97 MATHEMATICS AND COMPUTING↗

Datasets of Faults in Variable Air Volume Terminal Units in a Multi-Zone Commercial Building

Faults in HVAC systems can decrease system efficiency and equipment lifespan, leading to 5%–30% of energy consumption being wasted in commercial buildings. We identified two common faults in HVAC variable air volume systems: a stuck damper fault in the variable air volume terminal unit and a discharge airflow sensor fault. We conducted three sets of damper stuck tests and two sets of airflow sensor tests, each including a fault-free scenario and scenarios with varying levels of faults, over one day. The faults were implemented in Oak Ridge National Laboratory’s two-story Flexible Research Platform building to generate a high-quality, well-controlled dataset covering fault-induced and fault-free scenarios. The test building, fault test scenarios, and data validation are described here. The open-source dataset includes 1 min intervals of weather and building data on the presence and absence of building faults. This dataset can be used to analyze the effects of HVAC system faults on system operation and indoor building conditions, and to develop or evaluate a fault detection and diagnosis algorithm.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Nonlinear vs. linear biasing in Trp-cage folding simulations

Biased simulations have great potential for the study of slow processes, including protein folding. Atomic motions in molecules are nonlinear, which suggests that simulations with enhanced sampling of collective motions traced by nonlinear dimensionality reduction methods may perform better than linear ones. In this study, we compare an unbiased folding simulation of the Trp-cage miniprotein with metadynamics simulations using both linear (principle component analysis) and nonlinear (Isomap) low dimensional embeddings as collective variables. Folding of the mini-protein was successfully simulated in 200 ns simulation with linear biasing and non-linear motion biasing. The folded state was correctly predicted as the free energy minimum in both simulations. We found that the advantage of linear motion biasing is that it can sample a larger conformational space, whereas the advantage of nonlinear motion biasing lies in slightly better resolution of the resulting free energy surface. In terms of sampling efficiency, both methods are comparable.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of thread interruptions on tool pins in friction stir welding of AA6061

In this paper, effects of pin thread and thread interruptions (flats) on weld quality and process response parameters during friction stir welding (FSW) of 6061 aluminium alloy were quantified. Otherwise, identical smooth and threaded pins with zero to four flats were adopted for FSW. Weldability and process response variables were examined. Results showed that threads with flats significantly improved weld quality and reduced in-plane forces. A three-flat threaded pin led to production of defect-free welds under all examined welding conditions. Spectral analyses of in-plane forces and weld cross-sectional analysis were performed to establish correlation among pin flats, force dynamics and defect formation. Finally, the lowest in-plane force spectra amplitudes were consistently observed for defect-free welds.

42 ENGINEERING↗

Dispersal limitation and thermodynamic constraints govern spatial structure of permafrost microbial communities

Understanding drivers of permafrost microbial community composition is critical for understanding permafrost microbiology and predicting ecosystem responses to thaw, however studies describing ecological controls on these communities are lacking. We hypothesize that permafrost communities are uniquely shaped by constraints imposed by prolonged freezing, and decoupled from factors that influence non-permafrost soil communities. To test this hypothesis, we characterized patterns of environmental variation and microbial community composition in permafrost across an Alaskan boreal forest landscape. We used null modeling to estimate the relative importance of selective and neutral assembly processes on community composition, and identified environmental factors influencing ecological selection through regression and structural equation modeling (SEM). Proportionally, the strongest process influencing community composition was dispersal limitation (0.36), exceeding the influence of homogenous selection (0.21), variable selection (0.16), and homogenizing dispersal (0.05). Fe(II) content was the most important factor explaining variable selection, and was significantly associated with total selection by univariate regression (R2=0.14, 41 p=0.003). SEM supported a model in which Fe(II) content mediated influences of the Gibbs free energy of the organic matter pool and organic acid concentration on total selection. These findings reveal that the processes shaping microbial communities in permafrost are distinct from those in non-permafrost soils, as the stability of the permafrost environment imposes dispersal and thermodynamic constraints on permafrost communities. Models of permafrost community composition will need to account for these unique drivers in order to predict community characteristics across permafrost landscapes, and in efforts to understand how pre-thaw conditions will influence post-thaw ecological and biogeochemical processes.

permafrost↗