Search NASA⌕ Search

SEARCH · Search NASA

Results for “ACID”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Effect of surface acidity modulation on Pt/Al 2 O 3 single atom catalyst for carbon monoxide oxidation and methanol decomposition

With ideal metal utilization efficiency and homogeneous active sites, single atom catalysts (SACs) have attracted extensive attention in heterogeneous catalysis field. The performance of SACs is highly dependent on the local coordination environment of metal single atoms. However, few works reported the effect of surface acidity modification on the performance of SACs such as Pt SACs which have been widely studied nowadays. In this work, a Pt/Al 2 O 3 SAC has been successfully prepared using a bayerite Al(OH) 3 as support through simple IWI method for Pt loading. Through post-modification of Pt/Al 2 O 3 with acidic WO 3 and basic MgO, the surface acidity of Pt/Al 2 O 3 was tuned. Here, activity of CO oxidation and methanol decomposition on the modified catalysts has been evaluated. It was found that the catalytic performance was highly related to the surface acidity of Pt SACs. Basic MgO modified Pt/Al 2 O 3 performed better in CO oxidation under the reaction condition with H 2 O. Acidic WO 3 modified Pt/Al 2 O 3 showed superior activity in methanol decomposition. Detailed characterization and in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) study suggested that the positive H 2 O effect on CO oxidation was due to the mitigated formation of bicarbonate species on Pt/Al 2 O 3 and WO 3 /Pt/Al 2 O 3 catalysts and the promoted desorption of carbonate species from MgO/Pt/Al 2 O 3 . The superior methanol decomposition performance on WO 3 /Pt/Al 2 O 3 was owing to its abundant oxygen vacancies and high resistance to carbonate accumulation. This study highlights the importance of surface acidity modulation of Pt SACs in heterogeneous catalysis and suggests that fine-tuning the surface acidity can be an effective strategy in new SACs development.

36 MATERIALS SCIENCE↗

Partitioning of oxygen isotopes during the aqueous solvation of nitric acid

Mixtures of water and inorganic acids show differences in isotopic composition between the vapor and liquid phases, reportedly even at an azeotrope. A recent reactive azeotropy analysis rationalized this by allowing for differences in stable isotope composition between bound solvation complexes and the bulk liquid. In this study, a mixture of water and nitric acid was examined experimentally to determine whether or not significant differences in stable isotope composition exist between bound solvation complexes and the bulk solution. A Rayleigh distillation was conducted using a solution of nitric acid and water. During the distillation, it was expected that bulk water would be vaporized first while (bound) water involved with hydrating the acid would be vaporized at later times along with the acid. Samples of both distillate and residual liquid were collected over time intervals and analyzed to determine oxygen and nitrogen stable isotope composition using isotope ratio mass spectrometry. Comparative samples were collected from the distillation of water alone. The measured oxygen fractionation factors suggest that the acid is preferentially hydrated with 18 O-enriched water, compared to the unbound, or bulk, water. Preferential coordination of 18 O-enriched water with the dissolved acid is consistent with heavier water forming stronger bonds relative to light water. Here, the results imply that isotope-dependent partitioning between bulk solvent and dissolved complexes may prove necessary in developing accurate descriptions of isotope fractionation during vapor-liquid equilibrium.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Research progress on organic acid pretreatment of lignocellulose

Lignocellulosic biomass is a naturally occurring, renewable resource that is utilized to produce a variety of high–value-added products, such as fuels, acids, and building block chemicals. The pretreatment of lignocellulosic biomass is a crucial step in the deconstruction and fractionation of its components. Organic acids, such as formic, acetic, lactic, and maleic acids, have been widely studied for their effectiveness in lignocellulose pretreatment. Organic acid–based pretreatment techniques are gaining increased attention due to their ability to selectively separate hemicellulose and cellulose, promote oligomer formation, and minimize byproducts. This paper presents a comprehensive review of the various advancements in the science and application of organic acids for the pretreatment of lignocellulose. Furthermore, the significant challenges of organic acid recovery after pretreatment are highlighted, and different recovery methods are discussed. In conclusion, the future challenges related to utilizing organic acids for lignocellulose pretreatment are summarized, with a strong emphasis on adopting a sustainable approach to converting valuable bioresources into renewable products.

59 BASIC BIOLOGICAL SCIENCES↗

Topical Hyaluronic Acid vs. Standard of Care for the Prevention of Radiation Dermatitis After Adjuvant Radiotherapy for Breast Cancer: Single-Blind Randomized Phase III Clinical Trial

Purpose: To determine the efficacy of an emulsion containing hyaluronic acid to reduce the development of {>=}Grade 2 radiation dermatitis after adjuvant breast radiation compared with best supportive care. Methods and Materials: Women with breast cancer who had undergone lumpectomy and were to receive whole-breast radiotherapy to 50 Gy with a 10- to 16-Gy surgical bed boost were enrolled in a prospective randomized trial to compare the effectiveness of a hyaluronic acid-based gel (RadiaPlex) and a petrolatum-based gel (Aquaphor) for preventing the development of dermatitis. Each patient was randomly assigned to use hyaluronic acid gel on the medial half or the lateral half of the irradiated breast and to use the control gel on the other half. Dermatitis was graded weekly according to the Common Terminology Criteria v3.0 by the treating physician, who was blinded as to which gel was used on which area of the breast. The primary endpoint was development of {>=}Grade 2 dermatitis. Results: The study closed early on the basis of a recommendation from the Data and Safety Monitoring Board after 74 of the planned 92 patients were enrolled. Breast skin treated with the hyaluronic acid gel developed a significantly higher rate of {>=}Grade 2 dermatitis than did skin treated with petrolatum gel: 61.5% (40/65) vs. 47.7% (31/65) (p = 0.027). Only 1ne patient developed Grade 3 dermatitis using either gel. A higher proportion of patients had worse dermatitis in the breast segment treated with hyaluronic acid gel than in that treated with petrolatum gel at the end of radiotherapy (42% vs. 14%, p = 0.003). Conclusion: We found no benefit from the use of a topical hyaluronic acid-based gel for reducing the development of {>=}Grade 2 dermatitis after adjuvant radiotherapy for breast cancer. Additional studies are needed to determine the efficacy of hyaluronic acid-based gel in controlling radiation dermatitis symptoms after they develop.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Metal arsonate polymers of Cd, Zn, Ag and Pb supported by 4-aminophenylarsonic acid

The coordination preferences of 4-aminophenylarsonic acid, 4-NH{sub 2}C{sub 6}H{sub 4}AsO{sub 3}H{sub 2}, (p-arsanilic acid) with CdCl{sub 2}{center_dot}2.5H{sub 2}O, ZnCl{sub 2}, Ag(SO{sub 3}CF{sub 3}) and Pb(NO{sub 3}){sub 2} have been investigated affording five new metal arsonate polymers. The reaction between 4-aminophenylarsonic acid and CdCl{sub 2}{center_dot}2.5H{sub 2}O resulted in a one-dimensional polymer, [{l_brace}Cd(4-NH{sub 3}C{sub 6}H{sub 4}AsO{sub 3}H)(Cl){sub 2}{r_brace}(H{sub 2}O){sub 2}]{sub n}, 1, in which the polymeric chain is propagated by bridging chlorides. Exchange of CdCl{sub 2} for ZnCl{sub 2} afforded [{l_brace}Zn{sub 2}(4-NH{sub 3}C{sub 6}H{sub 4}AsO{sub 3})(Cl){sub 2}{r_brace}(H{sub 2}O){sub 2}(Cl)]{sub n}, 2, featuring interlinked 6- and 8-membered [Zn-O-As] ring systems. The reaction of Ag(SO{sub 3}CF{sub 3}) with 4-aminophenylarsonic acid, afforded polymeric 3, [Ag(4-NH{sub 2}C{sub 6}H{sub 4}AsO{sub 3}H)(4-NH{sub 2}C{sub 6}H{sub 4}AsO{sub 3}H{sub 2})]{sub n} where coordination of the amino group to the silver center is observed and [{l_brace}Ag{sub 2}(4-NH{sub 3}C{sub 6}H{sub 4}AsO{sub 3}H)(4-NH{sub 3}C{sub 6}H{sub 4}AsO{sub 3})({mu}2-SO{sub 3}CF{sub 3}){sub 2}{r_brace}(SO{sub 3}CF{sub 3}){sub 2}]{sub n}, 4. By comparison, the reaction of p-arsanilic acid with Pb(NO{sub 3}){sub 2} yielded a polymeric chain [Pb(4-NH{sub 3}C{sub 6}H{sub 4}AsO{sub 3}H)(NO{sub 3}){sub 2}]{sub n}, 5 of similar topology to 1. The structures of 1-5 have been indiscriminately characterized by single crystal X-ray diffraction and their composition supported by relevant spectroscopic techniques. A comparison of the structural features of these polymers is used to determine the coordination preference of the ligand and factors influencing structural motifs, for example, the role of the anion. - Graphical abstract: The reaction of 4-aminophenylarsonic acid, 4-NH{sub 2}C{sub 6}H{sub 4}AsO{sub 3}H{sub 2}, with cadmium, zinc, silver, and lead have resulted in five new metal arsonate polymers that have been characterized by single crystal X-ray diffraction and spectroscopic means. Highlights: Black-Right-Pointing-Pointer The synthesis of five novel metal arsonates with 4-aminophenyl arsonic acid. Black-Right-Pointing-Pointer Single crystal X-ray diffraction studies revealed polymeric structures. Black-Right-Pointing-Pointer The luminescent properties of the metal arsonates were investigated.

36 MATERIALS SCIENCE↗

Surface and interlayer base-characters in lepidocrocite titanate: The adsorption and intercalation of fatty acid

While layered double hydroxides (LDHs) with positively-charged sheets are well known as basic materials, layered metal oxides having negatively-charged sheets are not generally recognized so. In this article, the surface and interlayer base-characters of O{sup 2−} sites in layered metal oxides have been demonstrated, taking lepidocrocite titanate K{sub 0.8}Zn{sub 0.4}Ti{sub 1.6}O{sub 4} as an example. The low basicity (0.04 mmol CO{sub 2}/g) and low desorption temperature (50–300 °C) shown by CO{sub 2}− TPD suggests that O{sup 2−} sites at the external surfaces is weakly basic, while those at the interlayer space are mostly inaccessible to CO{sub 2}. The liquid-phase adsorption study, however, revealed the uptake as much as 37% by mass of the bulky palmitic acid (C{sub 16} acid). The accompanying expansion of the interlayer space by ~0.1 nm was detected by PXRD and TEM. In an opposite manner to the external surfaces, the interlayer O{sup 2−} sites can deprotonate palmitic acid, forming the salt (i.e., potassium palmitate) occluded between the sheets. Two types of basic sites are proposed based on ultrafast {sup 1}H MAS NMR and FTIR results. The interlayer basic sites in lepidocrocite titanate leads to an application of this material as a selective and stable two-dimensional (2D) basic catalyst, as demonstrated by the ketonization of palmitic acid into palmitone (C{sub 31} ketone). Tuning of the catalytic activity by varying the type of metal (Zn, Mg, and Li) substituting at Ti{sup IV} sites was also illustrated. - Graphical abstract: Interlayer basic sites in lepidocrocite titanate, K{sub 0.8}Zn{sub 0.4}Ti{sub 1.6}O{sub 4}, lead to an intercalation of palmitic acid with a layer expansion. Display Omitted - Highlights: • K{sub 0.8}Zn{sub 0.4}Ti{sub 1.6}O{sub 4} intercalates palmitic acid, forming the occluded potassium salt. • The interlayer expansion is evidenced by PXRD patterns and TEM image. • Two types of basic sites are deduced from ultrafast {sup 1}H MAS NMR. • Lepidocrocite titanate catalyses ketonization of palmitic acid to palmitone and corresponding cracked products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Morphology and phase transformations of tin oxide nanostructures synthesized by the hydrothermal method in the presence of dicarboxylic acids

A new approach to the synthesis of non-stoichiometric tin oxide structures with different morphologies and the phase compositions has been evaluated. The nanostructures were synthesized by hydrothermal treatment of the mixtures of dicarboxylic acids ― aminoterephthalic or oxalic ― with nanocrystalline SnO{sub 2} powder, which was obtained via the sol-gel technology. The products were characterized by Raman and IR spectroscopy, SEM, HRTEM, and XRD analysis. It was shown that the controlled addition of a dicarboxylic acid leads not only to a change in the morphology of the nanostructures, but also to SnO{sub 2}–SnO{sub 2}/Sn{sub 3}O{sub 4}–Sn{sub 3}O{sub 4}–SnO phase transformations. A single-phase Sn{sub 3}O{sub 4} in the form of the well-separated hexagonal nanoplates and mixed SnO{sub 2}/Sn{sub 3}O{sub 4} phases in the form of hierarchical flower-like structures were obtained in the presence of organic additives. The effects of concentration, redox activity of the acids and heat treatment on the basic characteristics of the synthesized tin oxide nanostructures and phase transformations in the synthesized materials are discussed. - Graphical abstract: The controlled addition of aminoterephthalic or oxalic acid leads not only to a change in the morphology of the nanostructures, but also to SnO{sub 2}–SnO{sub 2}/Sn{sub 3}O{sub 4}–Sn{sub 3}O{sub 4}–SnO phase transformations. - Highlights: • A new approach to the synthesis of non-stoichiometric tin oxide structures is studied. • Tin oxide structures are synthesized via hydrothermal method with dicarboxylic acids. • Morphology and phase composition are changed with redox activity and dosage of acid. • The redox activity of acid has an effect on ratio of SnO and SnO{sub 2} in crystal structure. • A pure phase Sn{sub 3}O{sub 4} nanoplates and SnO{sub 2}/Sn{sub 3}O{sub 4} hierarchical structures are formed.

36 MATERIALS SCIENCE↗

Microstructural and physicochemical origins of electroless copper deposition on graphite enhanced by acid pretreatment

We report Acid treatment is the most widely used surface modification method for enhancing the electroless metal deposition (EMD) on carbon reinforcement materials (CRMs) for metal matrix nanocomposites. However, specific microstructural and physicochemical origins of the enhanced EMD on carbon surfaces by acid treatments have been rarely studied. Here, we investigated the effects of the nitric acid treatment on graphite, a prototypical combination of acid treatment and CRM, on the fidelity of Cu EMD and their structural and chemical origins. Complementary materials characterizations and density functional theory calculations revealed the acid-induced formation of broken C–C/C=C graphitic bonds and resulting surface micropores on graphite; this enabled a uniform dispersion of catalytic Sn/Pd nanoparticles during pre-EMD sensitization/activation processes via spontaneous binding of Sn and Pd ions and, consequently, a much more uniform Cu layer EMD compared to the untreated graphite. We proposed a general mechanism illustrating how the acid-induced microstructural and chemical modifications of carbon surface affected the spatial uniformity of catalytic metal reduction during EMD and, finally, the quality of deposited metal layer. The results clearly reveal the origins of the enhanced EMD on carbon materials by acid treatments, providing guidelines for optimizing EMD on general CRMs for high-performance metal matrix nanocomposites.

36 MATERIALS SCIENCE↗

Facile synthesis of high surface area nanostructured ceria-zirconia-yttria-lanthana solid solutions with the assistance of lauric acid and dodecylamine

Highlights: • High surface area nanostructured ceria-zirconia-yttria-lanthana solid solutions are synthesized by a facile method. • Hydrophobic surfaces are obtained with the addition of lauric acid and dodecylamine in the synthesis. • The introduced lauric acid and dodecylamine are chemically adsorbed onto the surface of materials through a coordination effect. • Excellent thermal stability are obtained in lauric acid and dodecylamine assisted materials. - Abstract: Co-precipitation combined with the assistance of lauric acid and dodecylamine was used to synthesize high surface area nanostructured ceria-zirconia-yttria-lanthana solid solutions (CZ-L and CZ-D). The promotion effects of lauric acid and dodecylamine were studied systematically by N{sub 2} adsorption-desorption, scanning electron microscopy (SEM), transmission electron microscopy (TEM), FT-IR and Raman analysis. After being thermal aged at 1100 °C for 4 h in air, CZ-L and CZ-D present high surface areas of 26 m{sup 2}/g and 16 m{sup 2}/g, respectively. The results indicate that the added lauric acid and dodecylamine are chemically adsorbed onto the surface of materials through coordination effect. The obtained hydrophobic surface could greatly decrease the amount of superficial adsorbed water on the material and significantly reduce the surface tension. The addition of lauric acid and dodecylamine could also effectively support the network structures of the material and resist the collapse of pores upon drying and calcination.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Endogenous bile acid disposition in rat and human sandwich-cultured hepatocytes

Sandwich-cultured hepatocytes (SCH) are used commonly to investigate hepatic transport protein-mediated uptake and biliary excretion of substrates. However, little is known about the disposition of endogenous bile acids (BAs) in SCH. In this study, four endogenous conjugated BAs common to rats and humans [taurocholic acid (TCA), glycocholic acid (GCA), taurochenodeoxycholic acid (TCDCA), and glycochenodeoxycholic acid (GCDCA)], as well as two BA species specific to rodents (α- and β-tauromuricholic acid; α/β TMCA), were profiled in primary rat and human SCH. Using B-CLEAR{sup ®} technology, BAs were measured in cells + bile canaliculi, cells, and medium of SCH by LC-MS/MS. Results indicated that, just as in vivo, taurine-conjugated BA species were predominant in rat SCH, while glycine-conjugated BAs were predominant in human SCH. Total intracellular BAs remained relatively constant over days in culture in rat SCH. Total BAs in control (CTL) cells + bile, cells, and medium were approximately 3.4, 2.9, and 8.3-fold greater in human than in rat. The estimated intracellular concentrations of the measured total BAs were 64.3 ± 5.9 μM in CTL rat and 183 ± 56 μM in CTL human SCH, while medium concentrations of the total BAs measured were 1.16 ± 0.21 μM in CTL rat SCH and 9.61 ± 6.36 μM in CTL human SCH. Treatment of cells for 24 h with 10 μM troglitazone (TRO), an inhibitor of the bile salt export pump (BSEP) and the Na{sup +}-taurocholate cotransporting polypeptide (NTCP), had no significant effect on endogenous BAs measured at the end of the 24-h culture period, potentially due to compensatory mechanisms that maintain BA homeostasis. These data demonstrate that BAs in SCH are similar to in vivo, and that SCH may be a useful in vitro model to study alterations in BA disposition if species differences are taken into account. -- Highlights: ► Bile acids (BAs) were measured in rat and human sandwich-cultured hepatocytes (SCH). ► Cell and medium BA concentrations were estimated using B-CLEAR{sup ®} technology. ► Endogenous BA profiles in SCH were similar to those reported in vivo for each species. ► Species differences were evident in endogenous BA profiles of rat vs human SCH. ► 10 µM troglitazone had no effect on endogenous BA profiles in rat or human SCH at 24 h.

60 APPLIED LIFE SCIENCES↗

Alisol B 23-acetate protects against ANIT-induced hepatotoxity and cholestasis, due to FXR-mediated regulation of transporters and enzymes involved in bile acid homeostasis

Intrahepatic cholestasis is a clinical syndrome with systemic and intrahepatic accumulation of excessive toxic bile acids that ultimately cause hepatobiliary injury. Appropriate regulation of bile acids in hepatocytes is critically important for protection against liver injury. In the present study, we characterized the protective effect of alisol B 23-acetate (AB23A), a natural triterpenoid, on alpha-naphthylisothiocyanate (ANIT)-induced liver injury and intrahepatic cholestasis in mice and further elucidated the mechanisms in vivo and in vitro. AB23A treatment dose-dependently protected against liver injury induced by ANIT through reducing hepatic uptake and increasing efflux of bile acid via down-regulation of hepatic uptake transporters (Ntcp) and up-regulation of efflux transporter (Bsep, Mrp2 and Mdr2) expression. Furthermore, AB23A reduced bile acid synthesis through repressing Cyp7a1 and Cyp8b1, increased bile acid conjugation through inducing Bal, Baat and bile acid metabolism through an induction in gene expression of Sult2a1. We further demonstrate the involvement of farnesoid X receptor (FXR) in the hepatoprotective effect of AB23A. The changes in transporters and enzymes, as well as ameliorative liver histology in AB23A-treated mice were abrogated by FXR antagonist guggulsterone in vivo. In vitro evidences also directly demonstrated the effect of AB23A on FXR activation in a dose-dependent manner using luciferase reporter assay in HepG2 cells. In conclusion, AB23A produces protective effect against ANIT-induced hepatotoxity and cholestasis, due to FXR-mediated regulation of transporters and enzymes. - Highlights: • AB23A has at least three roles in protection against ANIT-induced liver injury. • AB23A decreases Ntcp, and increases Bsep, Mrp2 and Mdr2 expression. • AB23A represses Cyp7a1 and Cyp8b1 through inducing Shp and Fgf15 expression. • AB23A increases bile acid metabolism through inducing Sult2a1 expression. • FXR activation is involved in the hepatoprotective effect of AB23A.

60 APPLIED LIFE SCIENCES↗

Valproate induced hepatic steatosis by enhanced fatty acid uptake and triglyceride synthesis

Steatosis is the characteristic type of VPA-induced hepatotoxicity and may result in life-threatening hepatic lesion. Approximately 61% of patients treated with VPA have been diagnosed with hepatic steatosis through ultrasound examination. However, the mechanisms underlying VPA-induced intracellular fat accumulation are not yet fully understood. Here we demonstrated the involvement of fatty acid uptake and lipogenesis in VPA-induced hepatic steatosis in vitro and in vivo by using quantitative real-time PCR (qRT-PCR) analysis, western blotting analysis, fatty acid uptake assays, Nile Red staining assays, and Oil Red O staining assays. Specifically, we found that the expression of cluster of differentiation 36 (CD36), an important fatty acid transport, and diacylglycerol acyltransferase 2 (DGAT2) were significantly up-regulated in HepG2 cells and livers of C57B/6J mice after treatment with VPA. Furthermore, VPA treatment remarkably enhanced the efficiency of fatty acid uptake mediated by CD36, while this effect was abolished by the interference with CD36-specific siRNA. Also, VPA treatment significantly increased DGAT2 expression as a result of the inhibition of mitogen-activated protein kinase kinase (MEK) – extracellular regulated kinase (ERK) pathway; however, DGAT2 knockdown significantly alleviated VPA-induced intracellular lipid accumulation. Additionally, we also found that sterol regulatory element binding protein-1c (SREBP-1c)-mediated fatty acid synthesis may be not involved in VPA-induced hepatic steatosis. Overall, VPA-triggered over-regulation of CD36 and DGAT2 could be helpful for a better understanding of the mechanisms underlying VPA-induced hepatic steatosis and may offer novel therapeutic strategies to combat VPA-induced hepatotoxicity. - Highlights: • VPA induced hepatic steatosis and modulated genes associated with lipid metabolism. • CD36-mediated fatty acid uptake contributed to VPA-induced lipid accumulation. • PA increased the hepatic level of DGAT2 through inhibiting MEK-ERK pathway and enhanced triglyceride synthesis. • SREBP-1c-mediated fatty acid synthesis was not involved in VPA-induced hepatic steatosis.

60 APPLIED LIFE SCIENCES↗

Energetics of Base–Acid Pairs for the Design of High-Temperature Fuel Cell Polymer Electrolytes

The interaction energy of base–acid plays a key role in acid retention of phosphoric acid (PA)-doped polymer electrolytes under fuel cell operating conditions. Here, we investigate the energetics of proton-accepting and hydroxide-donating organic bases using density functional theory calculations. Because of their weak basicity, proton-accepting organic bases such as benzimidazole have relatively low interaction energy with the acid in the absence of water (15.3–28.0 kcal mol –1 ). Energetics of the proton-accepting base–PA complex increases by adding water, indicating that the interactions in the base–acid complex strengthen in the presence of water. On the other hand, hydroxide-donating organic bases, such as tetramethylammonium hydroxide, have high interaction energy with PA (~110 kcal mol –1 ), which remains high in the presence of water. The chemical shifts of 31P NMR support the energetics of the base–acid complexes. Overall, this study further discusses the benefit of incorporating hydroxide-donating organic bases into the polymeric structure over proton-accepting bases as a way to increase acid retention.

25 ENERGY STORAGE↗

Adsorption, Orientation, and Speciation of Amino Acids at Air–Aqueous Interfaces for the Direct Air Capture of CO 2

Amino acids make up a promising family of molecules capable of direct air capture (DAC) of CO 2 from the atmosphere. Under alkaline conditions, CO 2 reacts with the anionic form of an amino acid to produce carbamates and deactivated zwitterionic amino acids. The presence of the various species of amino acids and reactive intermediates can have a significant effect on DAC chemistry, the role of which is poorly understood. In this study, all-atom molecular dynamics (MD) based computational simulations and vibrational sum frequency generation (vSFG) spectroscopy studies were conducted to understand the role of competitive interactions at the air–aqueous interface in the context of DAC. We find that the presence of potassium bicarbonate ions, in combination with the anionic and zwitterionic forms of amino acids, induces concentration and charge gradients at the interface, generating a layered molecular arrangement that changes under pre- and post-DAC conditions. In parallel, an enhancement in the surface activity of both anionic and zwitterionic forms of amino acids is observed, which is attributed to enhanced interfacial stability and favorable intermolecular interactions between the adsorbed amino acids in their anionic and zwitterionic forms. The collective influence of these competitive interactions, along with the resulting interfacial heterogeneity, may in turn affect subsequent capture reactions and associated rates. Finally, these effects underscore the need to consider dynamic changes in interfacial chemical makeup to enhance DAC efficiency and to develop successful negative emission and storage technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Co-Catalyst Enabled Biotransformation of Polyunsaturated Fatty Acids for Biobased Monomers

Enzymatic lipid epoxidation offers a promising approach to obtain renewable intermediates for biomaterials, but regiochemical control of these reactions has remained elusive. Here we report the discovery and application of artificial cocatalysts to direct the regioselectivity of catalytic epoxidation with the lipase CpLIP2. The methyl esters of alkyl dicarboxylic acids show the unique ability to direct regioselective epoxidation of polyunsaturated fatty acids, major components of plant and algae-based oils. We apply this transformation to the conversion of linoleic acid into sebacic acid, a dicarboxylic acid precursor valuable for biobased polyester polyurethanes, through a six-step pathway involving a regioselective Meinwald rearrangement. To highlight the route’s significance, sebacic acid was used to prepare a 100% biobased thermoplastic polyurethane, illustrating the relevance of this pathway to industrial applications. Furthermore, this regioselective chemoenzymatic oxidation and rearrangement process can be used to access multiple dicarboxylic acids that have remained previously unexplored as biobased monomers.

09 BIOMASS FUELS↗

Aqueous-Phase Acetic Acid Ketonization over Monoclinic Zirconia

The effect of aqueous phase on the acetic acid ketonization over monoclinic zirconia has been investigated using first-principles based density functional theory (DFT) calculations. To capture the aqueous phase chemistry over the solid zirconia catalyst surface, the aqueous phase is represented by 111 explicit water molecules with a liquid water density of 0.93 g/cm3 and the monoclinic zirconia is modeled by the most stable surface structure . The dynamic nature of aqueous phase/ interface was studied using ab initio molecular dynamics simulation, indicating that nearly half of the surface Zr sites are occupied by either adsorbed water molecules or hydroxyl groups at 550 K. DFT calculations show that the adsorption process of acetic acid from the liquid water phase to the surface is nearly thermodynamically neutral with a Gibbs free energy of -2.3 kJ/mol although the adsorption strength of acetic acid on the surface in aqueous phase is much stronger than in vapor phase. Therefore it is expected that the adsorption of acetic acid will dramatically affects aqueous phase ketonization reactivity over the monoclinic zirconia catalyst. Using the same ketonization mechanism via the β-keto acid intermediate, we have compared acetic acid ketonization to acetone in both vapor and aqueous phases. Our DFT calculation results show although the rate-determining step of the β-keto acid formation via the C-C coupling is not pronouncedly affected, the presence of liquid water molecules will dramatically affect dehydrogenation and hydrogenation steps via proton transfer mechanism. This work was financially supported by the United States Department of Energy (DOE)’s Bioenergy Technologies Office (BETO) and performed at the Pacific Northwest National Laboratory (PNNL). PNNL is a multi-program national laboratory operated for DOE by Battelle Memorial Institute. Computing time and advanced catalyst characterization use was granted by a user proposal at the William R. Wiley Environmental Molecular Sciences Laboratory (EMSL). EMSL is a national scientific user facility sponsored by the Department of Energy’s Office of Biological and Environmental Research and located at PNNL.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chemoselective Hydrodeoxygenation of Carboxylic Acids to Hydrocarbons over Nitrogen-doped Carbon-Alumina Hybrid-Supported Iron Catalysts

Here, the establishment of catalyst systems for chemoselective hydrodeoxygenation (HDO) of carboxylic acids to hydrocarbons, such as the HDO of long-chain fatty acids to alkanes, is important for biomass-to-biofuel conversion. As the most abundant and probably the cheapest transition-metal on the earth, iron is a promising non-noble alternative to precious metals for large-scale conversion of biomass. However, it usually suffers from unsatisfactory activity. In this work, nitrogen-doped carbon-alumina hybrid-supported iron (Fe-N-C@Al 2 O 3 ) catalyst is established for chemoselective HDO of carboxylic acids to hydrocarbons. By using stearic acid HDO as the model reaction, n-octadecane and n-hepadecane are produced with yields of 91.9% and 6.0%, respectively. Triglycerides can also be converted into liquid alkanes with total molar yield of >92%. In addition, the iron catalyst can chemoselectively catalyze the HDO of carboxylic acid group in the presence of other functional groups such as an aromatic ring. This chemoselectivity is rarely seen before because the aromatic ring is usually easier to be hydrogenated than carrying out HDO of carboxylic acid group. The characterization results showed that both the formation of nitrogen-doped carbon-alumina hybrid and the iron-loading are important for the Lewis basicity of these catalysts, in order to adsorb the acid substrates. The addition of melamine as nitrogen precursor during pyrolysis eliminates undesired reactions between iron precursor and alumina support to form inactive hercynite phase, leading to the formation of Fe 3 C active phase for the hydrogenation of –COOH to –CH 2 OH and the hybrid of N-C and alumina for the HDO of -CH 2 OH to –CH 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Determination of Arrhenius and Thermodynamic Parameters for the Aqueous Reaction of the Hydroxyl Radical with Lactic Acid

Lactic acid is a major component of the TALSPEAK process planned for use in the separation of trivalent lanthanide and actinide elements. This acid acts both as a buffer, and also to protect the actinide complexant from radiolytic damage. However, there is little kinetic information on the reaction of water radiolysis species with lactic acid, particularly under the anticipated process conditions of aerated aqueous solution at pH~3, where oxidizing reactions are expected to dominate. Here we have determined temperature-dependent reaction rate constants for the reactions of the hydroxyl radical with lactic acid and the lactate ion. For lactic acid this rate constant is given by the equation: ln k1 = (23.85 ± 0.19) – (1120 ± 54) / T, corresponding to an activation energy of 9.31 ± 0.45 kJ mol-1 and a room temperature reaction rate constant of (5.24 ± 0.09) x 108 M-1 s-1 (24.0oC). For the lactate ion, the temperature-dependent rate constant is given by: ln k2 = (24.83 ± 0.14) – (1295 ± 42) / T, for an activation energy of 10.76 ± 0.35 kJ mol-1 and a room temperature value of (7.77 ± 0.11) x 108 M-1 s-1 (22.2oC). These kinetic data have been combined with autotitration measurements to determine the temperature-dependent behavior of the lactic acid pKa value, allowing thermodynamic parameters for the acid dissociation to be calculated as ?Hº = -10.75 ± 1.77 kJ mol-1, ?Sº = -103.9 ± 6.0 J K-1 mol-1 and ?Gº = 20.24 ± 2.52 kJ mol-1 at low ionic strength.

99 GENERAL AND MISCELLANEOUS↗