Search NASA⌕ Search

SEARCH · Search NASA

Results for “AFM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Technique for measurement of magnetostriction in an individual nanowire using atomic force microscopy

We have investigated a method for measuring the dimensions of an individual multilayered Fe-Ga/Cu nanowire (NW) as it changes with induced magnetization. In this study, we demonstrate the proposed approach and establish this as a viable method for measuring the magnetostrictive behavior of an individual Fe-Ga/Cu NW using atomic force microscopy (AFM). When an external magnetic field (∼300 Oe) was applied perpendicular to the NW axis, the NW length appeared minimized. When a field (∼1000 Oe) was applied parallel to the NW axis, the height profile of the NW was found to be higher than in the case with no parallel external field. Since both ends of the NW were welded to the substrate, the magnetic field induced dimensional change of the NW caused deflection of the NW in the upward direction, which was significant enough to be detected by AFM. An average height difference of 15 nm was measured with and without an applied field which was then used to calculate the magnetostriction of the multilayered NW.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Direct imaging of enhanced current collection on grain boundaries of Cu(In,Ga)Se{sub 2} solar cells

We report on direct imaging of current collection by performing conductive atomic force microscopy (C-AFM) measurement on a complete Cu(In,Ga)Se{sub 2} solar cell. The localized current was imaged by milling away the top conductive layer of the device by repeated C-AFM scans. The result exhibits enhanced photocurrent collection on grain boundaries (GBs) of CIGS films, consistent with the argument for electric-field-assisted carrier collection on the GBs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of Cr doping on the magnetic properties of multiferroic YMnO{sub 3}

We have synthesized a series of YMn{sub 1−x}Cr{sub x}O{sub 3} (0 ≤ x ≤ 0.1) samples and study the effect of Cr-doping on their magnetic properties. The magnetic characterization indicates that with increasing Cr-content up to 0.1, the antiferromagnetic (AFM) transition temperature increases from 73 to 89 K. Our experiment results also indicate that the Cr-doped samples exhibit the characteristics of spin-glass state at low temperature. Moreover, the magnetic hysteresis curves of the doped samples show a weak ferromagnetic (FM) behavior. It is found that the spin-glass state of the Cr-doped samples is due to the competition between AFM superexchange and FM double-exchange interaction, induced by the Cr doping.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic structure, magnetic properties, and magnetostructural transformations in rare earth dialuminides

We report electronic structure, magnetic properties, and magnetostructural transformations of selected rare earth dialuminides calculated by using local spin density approximation (LSDA), including the Hubbard U parameter (LSDA + U) approach. Total energy calculations show that CeAl{sub 2} and EuAl{sub 2} adopt antiferromagnetic (AFM) ground states, while dialuminides formed by other magnetic lanthanides have ferromagnetic (FM) ground states. The comparison of theoretical and experimental magnetic moments of CeAl{sub 2} indicates that the 4f orbital moment of Ce in CeAl{sub 2} is quenched. Theoretical calculations confirm that Eu in EuAl{sub 2} and Yb in YbAl{sub 2} are divalent. PrAl{sub 2} exhibits a tetragonal distortion near FM transition. HoAl{sub 2} shows a first order magnetostructural transition while DyAl{sub 2} shows a second order transformation below magnetic transition. The dialuminides formed by Nd, Tb, and Er are simple ferromagnets without additional anomalies in the FM state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nanopipette combined with quartz tuning fork-atomic force microscope for force spectroscopy/microscopy and liquid delivery-based nanofabrication

This paper introduces a nanopipette combined with a quartz tuning fork-atomic force microscope system (nanopipette/QTF-AFM), and describes experimental and theoretical investigations of the nanoscale materials used. The system offers several advantages over conventional cantilever-based AFM and QTF-AFM systems, including simple control of the quality factor based on the contact position of the QTF, easy variation of the effective tip diameter, electrical detection, on-demand delivery and patterning of various solutions, and in situ surface characterization after patterning. This tool enables nanoscale liquid delivery and nanofabrication processes without damaging the apex of the tip in various environments, and also offers force spectroscopy and microscopy capabilities.

36 MATERIALS SCIENCE↗

A site-selective antiferromagnetic ground state in layered pnictide-oxide BaTi{sub 2}As{sub 2}O

The electronic and magnetic properties of BaTi{sub 2}As{sub 2}O have been investigated using both the first-principles and analytical methods. The full-potential linearized augmented plane-wave calculations show that the most stable state is a site-selective antiferromagnetic (AFM) metal with a 2×1×1 magnetic unit cell containing two nonmagnetic Ti atoms and two other Ti atoms with antiparallel moments. Further analysis to Fermi surface and spin susceptibility shows that the site-selective AFM ground state is driven by the Fermi surface nesting and the Coulomb correlation. Meanwhile, the charge density distribution remains uniform, suggesting that the phase transition at 200 K in experiment is a spin-density-wave transition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Solvent polarity and nanoscale morphology in bulk heterojunction organic solar cells: A case study

Organic bulk heterojunction solar cells were fabricated under identical experimental conditions, except by varying the solvent polarity used for spin coating the active layer components and their performance was evaluated systematically. Results showed that presence of nitrobenzene-chlorobenzene composition governs the morphology of active layer formed, which is due to the tuning of solvent polarity as well as the resulting solubility of the P3HT:PCBM blend. Trace amount of nitrobenzene favoured the formation of better organised P3HT domains, as evident from conductive AFM, tapping mode AFM and surface, and cross-sectional SEM analysis. The higher interfacial surface area thus generated produced cells with high efficiency. But, an increase in the nitrobenzene composition leads to a decrease in cell performance, which is due to the formation of an active layer with larger size polymer domain networks with poor charge separation possibility.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Alpha and recoil track detection in poly(methyl methacrylate) (PMMA)—Towards a method for in vitro assessment of radiopharmaceuticals internalized in cancer cells

A method for detection and characterization of single MeV α-particle and recoil tracks in PMMA photoresist by atomic force microscopy (AFM) analysis has been demonstrated. The energy deposition along the track is shown to lead to a latent pattern in the resist due to contrast reversal. It has been shown that the pattern, consisting of conical spikes, can be developed by conventional processing as a result of the dissolution rate of poly(methyl methacrylate) (PMMA) being greater than that for the modified material in the cylindrical volume of the track core. The spikes can be imaged and counted by routine AFM analysis. Investigations by angular-resolved near-grazing incidence reveal additional tracks that correspond to recoil tracks. The observations have been correlated with modelling, and shown to be in qualitative agreement with prevailing descriptions of collision cascades. The results may be relevant to technologies that are based on detection and characterization of single energetic ions. In particular, the direct visualization of the collision cascade may allow more accurate estimates of the actual interaction volume, which in turn will permit more precise assessment of dose distribution of α-emitting radionuclides used for targeted radiotherapy. The results could also be relevant to other diagnostic or process technologies based on interaction of energetic ions with matter.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Measurement of local internal friction in metallic glasses

Atomic force acoustic microscopy (AFAM), an advanced scanning probe microscopy technique, has been used to measure local elastic properties with a spatial resolution given by the tip-sample contact radius. AFAM is based on inducing out-of-plane vibrations in the specimen. The vibrations are sensed by the AFM cantilever from by the photodiode signal when its tip is in contact with the material under test. To measure local damping, the inverse quality factor Q{sup −1} of the resonance curve is usually evaluated. Here, from the contact-resonance spectra obtained, we determine the real and imaginary part of the contact stiffness k* and from these two quantities the local damping factor Q{sub loc}{sup −1} is obtained which is proportional to the imaginary part γ of the contact stiffness. The evaluation of the data is based on the cantilever's mass distribution with damped flexural modes and not on an effective point-mass approximation for the cantilever’s motion. The given equation is simple to use and has been employed to study the local Q{sub loc}{sup −1} of amorphous PdCuSi metallic glass and its crystalline counterpart as a function of position of the AFM tip on the surface. The width of the distribution changes dramatically from the amorphous to the crystalline state as expected from the consequences of the potential-energy landscape picture. The center value of the distribution curve for Q{sub loc}{sup −1} coincides very well with published data, based on global ultrasonic or internal friction measurements. This is compared to Q{sub loc}{sup −1} measured in crystalline SrTiO{sub 3}, which exhibits a narrow distribution, as expected.

36 MATERIALS SCIENCE↗

Effect of antiferromagnetic layer thickness on exchange bias, training effect, and magnetotransport properties in ferromagnetic/antiferromagnetic antidot arrays

The effect of antiferromagnetic (AFM) layer on exchange bias (EB), training effect, and magnetotransport properties in ferromagnetic (FM) /AFM nanoscale antidot arrays and sheet films Ag(10 nm)/Co(8 nm)/NiO(t{sub NiO})/Ag(5 nm) at 10 K is studied. The AFM layer thickness dependence of the EB field shows a peak at t{sub NiO} = 2 nm that is explained by using the random field model. The misalignment of magnetic moments in the three-dimensional antidot arrays causes smaller decrease of EB field compared with that in the sheet films for training effect. The anomalous magnetotransport properties, in particular positive magnetoresistance (MR) for antidot arrays but negative MR for sheet films are found. The training effect and magnetotransport properties are strongly affected by the three-dimensional spin-alignment effects in the antidot arrays.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Bi-harmonic cantilever design for improved measurement sensitivity in tapping-mode atomic force microscopy

This paper presents a method and cantilever design for improving the mechanical measurement sensitivity in the atomic force microscopy (AFM) tapping mode. The method uses two harmonics in the drive signal to generate a bi-harmonic tapping trajectory. Mathematical analysis demonstrates that the wide-valley bi-harmonic tapping trajectory is as much as 70% more sensitive to changes in the sample topography than the standard single-harmonic trajectory typically used. Although standard AFM cantilevers can be driven in the bi-harmonic tapping trajectory, they require large forcing at the second harmonic. A design is presented for a bi-harmonic cantilever that has a second resonant mode at twice its first resonant mode, thereby capable of generating bi-harmonic trajectories with small forcing signals. Bi-harmonic cantilevers are fabricated by milling a small cantilever on the interior of a standard cantilever probe using a focused ion beam. Bi-harmonic drive signals are derived for standard cantilevers and bi-harmonic cantilevers. Experimental results demonstrate better than 30% improvement in measurement sensitivity using the bi-harmonic cantilever. Images obtained through bi-harmonic tapping exhibit improved sharpness and surface tracking, especially at high scan speeds and low force fields.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Selective nano-patterning of graphene using a heated atomic force microscope tip

In this study, we introduce a selective thermochemical nano-patterning method of graphene on insulating substrates. A tiny heater formed at the end of an atomic force microscope (AFM) cantilever is optimized by a finite element method. The cantilever device is fabricated using conventional micromachining processes. After preliminary tests of the cantilever device, nano-patterning experiments are conducted with various conducting and insulating samples. The results indicate that faster scanning speed and higher contact force are desirable to reduce the sizes of nano-patterns. With the experimental condition of 1 μm/s and 24 mW, the heated AFM tip generates a graphene oxide layer of 3.6 nm height and 363 nm width, on a 300 nm thick SiO{sub 2} layer, with a tip contact force of 100 nN.

36 MATERIALS SCIENCE↗

Structure and composition of zirconium carbide thin-film grown by ion beam sputtering for optical applications

Thin film of compound material ZrC was deposited on Si (100) wafer using ion beam sputtering method. The deposition was carried out at room temperature and at base pressure of 3×10{sup −5} Pa. X-ray photoelectron spectroscopy (XPS) measurements were performed for determining the surface chemical compositions. Grazing incidence x-ray reflectivity (GIXRR) measurements were performed to study the film thickness, roughness and density. From GIXRR curve roughness value of the film was found less than 1 nm indicating smooth surface morphology. Films density was found 6.51 g/cm{sup 3}, which is close to bulk density. Atomic force microscopy (AFM) measurements were performed to check the surface morphology. AFM investigation showed that the film surface is smooth, which corroborate the GIXRR data. Figure 2 of the original article PDF file, as supplied to AIP Publishing, contained a PDF processing error. This article was updated on 12 May 2014 to correct that error.

36 MATERIALS SCIENCE↗

Study of photoconductivity in Ni doped CdS thin films prepared by spray pyrolysis technique

Ni-doped cadmium sulphide [Cd{sub 1−x}Ni{sub x}S, (x=0, 0.03, 0.05 and 0.20)] thin films were investigated for photoconductive properties. The films were prepared by spray Pyrolysis technique (SPT). AFM and two probe resistivity measurements were carried out to analyze the morphological and electrical properties of the films. AFM shows the note worthy changes in the morphology where the nanorod structures in CdS is changed into nano particles with the Ni doping. The presence of persistence photo current is demonstrated and extensive photoconductivity analysis has been studied on these films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phonons and magnetic excitation correlations in weak ferromagnetic YCrO{sub 3}

Here, we report the temperature dependent Raman spectroscopic studies on orthorhombically distorted perovskite YCrO{sub 3} over a temperature range of 20–300 K. Temperature dependence of DC-magnetization measurements under field cooled and zero field cooled protocols confirmed a Néel transition at T{sub N} ∼ 142 K. Magnetization isotherms recorded at 125 K show a clear loop opening without any magnetization saturation up to 20 kOe, indicating a coexistence of antiferromagnetic (AFM) and weak ferromagnetic (WFM) phases. Estimation of exchange constants using mean-field approximation further confirm the presence of a complex magnetic phase below T{sub N}. Temperature evolution of Raman line-shape parameters of the selected modes (associated with the octahedral rotation and A(Y)-shift in the unit-cell) reveal an anomalous phonon shift near T{sub N}. An additional phonon anomaly was identified at T{sup *} ∼ 60 K, which could possibly be attributed to the change in the spin dynamics. Moreover, the positive and negative shifts in Raman frequencies between T{sub N} and T{sup *} suggest competing WFM and AFM interactions. A close match between the phonon frequency of B{sub 3g} (3)-octahedral rotation mode with the square of sublattice magnetization between T{sub N} and T{sup *} is indicative of the presence of spin-phonon coupling in multiferroic YCrO{sub 3}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dielectric spectroscopy at the nanoscale by atomic force microscopy: A simple model linking materials properties and experimental response

The use of an atomic force microscope for studying molecular dynamics through dielectric spectroscopy with spatial resolution in the nanometer scale is a recently developed approach. However, difficulties in the quantitative connection of the obtained data and the material dielectric properties, namely, frequency dependent dielectric permittivity, have limited its application. In this work, we develop a simple electrical model based on physically meaningful parameters to connect the atomic force microscopy (AFM) based dielectric spectroscopy experimental results with the material dielectric properties. We have tested the accuracy of the model and analyzed the relevance of the forces arising from the electrical interaction with the AFM probe cantilever. In this way, by using this model, it is now possible to obtain quantitative information of the local dielectric material properties in a broad frequency range. Furthermore, it is also possible to determine the experimental setup providing the best sensitivity in the detected signal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strain-modulated antiferromagnetic spin orientation and exchange coupling in Fe/CoO(001)

The effect of CoO spin orientation on exchange coupling was investigated in single-crystalline Fe/CoO/MnO/MgO(001) systems. An antiferromagnetic CoO spin reorientation transition from the in-plane direction to the out-of-plane direction was found to be associated with the in-plane strain transition in CoO film from compression to expansion. The induced uniaxial anisotropies by exchange coupling at the Fe/CoO interface are significantly stronger for the in-plane CoO spin orientation than for the out-of-plane CoO spin orientation. Our study provides a way to modify the exchange coupling in the ferromagnetic (FM)/antiferromagnetic (AFM) bilayer by modulating the strain in the AFM film.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Time evolution of off-state degradation of AlGaN/GaN high electron mobility transistors

The evolution of AlGaN/GaN high electron mobility transistors under off-state stress conditions is studied by gate leakage current (I{sub g}) monitoring, electroluminescence (EL), and atomic force microscope (AFM) imaging at room temperature. It is found that the number of off-state failure sites as identified by EL increases over time during stress until it reaches a saturation value. I{sub g} increases accordingly during stress until this saturation number of failure sites is reached. AFM scanning of the device surface stripped of metal contacts and passivation reveals surface pits corresponding to the location of the EL spots. These pits have an elongated shape oriented towards the drain contact whose length is correlated with the distance to the adjacent pits and with the time since their appearance during the stress experiment. A model for the generation and evolution of the off-state stress-related failure sites is proposed consistent with the experimental results, bringing together surface migration of electrochemical species with trap-based leakage mechanisms and resulting in the formation of an exclusion zone around each failure site.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗