Search NASA⌕ Search

SEARCH · Search NASA

Results for “AGE DEPENDENCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

SPATIALLY RESOLVING THE HK Tau B EDGE-ON DISK FROM 1.2 TO 4.7 {mu}m: A UNIQUE SCATTERED LIGHT DISK

We present spatially resolved scattered light images of the circumstellar disk around HK Tau B at 3.8 and 4.7 {mu}m taken with the Keck Telescope Laser Guide Star Adaptive Optics (AO) system, and 1.6-2.12 {mu}m images taken with the Very Large Telescope/NACO AO system. Combined with previously published optical Hubble Space Telescope data, we investigate the spatially resolved scattered light properties of this edge-on circumstellar disk and probe for the presence of large grains. The 0.6-3.8 {mu}m scattered light observations reveal strong, and in some cases, unusual, wavelength dependencies in the observed disk morphology. The separation between the two scattered light nebulae, which is directly proportional to the disk-mass-opacity product, decreases by 30% between 0.6 and 3.8 {mu}m. Over the same wavelength range, the FWHM of the disk nebulosity declines by a factor of two, while the flux ratio between the two nebulae increases by a factor of {approx}8. No other disk known to date shows a flux ratio that increases with wavelength. Both the FWHM and nebula flux ratio are affected by the scattering phase function and the observed behavior can most readily be explained by a phase function that becomes more forward throwing with wavelength. The multi-wavelength scattered light observations also confirm the asymmetric nature of the disk and show that the level of asymmetry is a function of wavelength. We use the MCFOST radiative transfer code to model the disk at four wavelengths, corresponding to the I, H, Ks, and L' bandpasses. A single power-law grain size distribution can recreate the observed disk properties simultaneously at all four wavelengths. Bayesian analysis of the dust parameters finds a 99% probability that the maximum grain size is 5.5 {mu}m or larger. We also find that the grain size distribution is steep, with a 99% probability of a power-law index of 4.2 or larger, suggesting that these large grains are a small fraction of the overall dust population. The best-fit dust asymmetry parameter for each individual wavelength shows an unusual behavior, increasing with wavelength from the optical through the near-infrared, peaking at {approx}0.8 between 2.2 and 3.8 {mu}m, then decreasing by a factor of two by {approx}12 {mu}m. Comparing the wavelength dependence of the asymmetry parameter for HK Tau B with those for the interstellar medium (ISM) and dark cloud dust models, we find considerable evolution from an ISM state and argue for the presence of grain growth within the disk. Further, comparing the wavelength dependence of the asymmetry parameter for GG Tau, HV Tau C, and HK Tau B, the three disks that have been spatially resolved in scattered light between 0.8 and 3.8 {mu}m, finds a diverse range of dust properties, indicating differing degrees of grain growth for disks at a similar age.

79 ASTRONOMY AND ASTROPHYSICS↗

Evolution of Chemical Conditions and Estimated Plutonium Solubility in the Residual Waste Layer During Post-Closure Aging of Tank 18

This document updates the Eh-pH transitions from grout aging simulations and the plutonium waste release model of Denham (2007, Rev. 1) based on new data. New thermodynamic data for cementitious minerals are used for the grout simulations. Newer thermodynamic data, recommended by plutonium experts (Plutonium Solubility Peer Review Report, LA-UR-12-00079), are used to estimate solubilities of plutonium at various pore water compositions expected during grout aging. In addition, a new grout formula is used in the grout aging simulations and apparent solubilities of coprecipitated plutonium are estimated using data from analysis of Tank 18 residual waste. The conceptual model of waste release and the grout aging simulations are done in a manner similar to that of Denham (2007, Rev. 1). It is assumed that the pore fluid composition passing from the tank grout into the residual waste layer controls the solubility, and hence the waste release concentration of plutonium. Pore volumes of infiltrating fluid of an assumed composition are reacted with a hypothetical grout block using The Geochemist's Workbench{reg_sign} and changes in pore fluid chemistry correspond to the number of pore fluid volumes reacted. As in the earlier document, this results in three states of grout pore fluid composition throughout the simulation period that are termed Reduced Region II, Oxidized Region II, and Oxidized Region III. The one major difference from the earlier document is that pyrite is used to account for reducing capacity of the tank grout rather than pyrrhotite. This poises Eh at -0.47 volts during Reduced Region II. The major transitions in pore fluid composition are shown. Plutonium solubilities are estimated for discrete PuO2(am,hyd) particles and for plutonium coprecipitated with iron phases in the residual waste. Thermodynamic data for plutonium from the Nuclear Energy Agency are used to estimate the solubilities of the discrete particles for the three stages of pore fluid evolution. In Denham (2007, Rev. 1), the solubilities in the oxidized regions were estimated at Eh values in equilibrium with dissolved oxygen. Here, these are considered to be maximum possible solubilities because Eh values are unlikely to be in equilibrium with dissolved oxygen. More realistic Eh values are estimated here and plutonium solubilities calculated at these are considered more realistic. Apparent solubilities of plutonium that coprecipitated with iron phases are estimated from Pu:Fe ratios in Tank 18 residual waste and the solubilities of the host iron phases. The estimated plutonium solubilities are shown. Uncertainties in the grout simulations and plutonium solubility estimates are discussed. The primary uncertainty in the grout simulations is that little is known about the physical state of the grout as it ages. The simulations done here are pertinent to a porous medium, which may or may not be applicable to fractured grout, depending on the degree and nature of the fractures. Other uncertainties that are considered are the assumptions about the reducing capacity imparted by blast furnace slag, the effects of varying dissolved carbon dioxide and oxygen concentrations, and the treatment of silica in the simulations. The primary uncertainty in the estimates of plutonium solubility is that little is known about the exact form of plutonium in the residual waste. Other uncertainties include those inherent in the thermodynamic data, pH variations from those estimated in the grout simulations, the effects of the treatment of silica in the grout simulations, and the effect of varying total dissolved carbonate concentrations. The objective of this document is to update the model for solubility controls on release of plutonium from residual waste in closed F-Area waste tanks. The update is based on new information including a new proposed grout formulation, chemical analysis of Tank 18 samples and more current thermodynamic data for plutonium and grout minerals. In addition, minor changes to the modeling of the grout chemical evolution have been made. It should be noted that the intent is to provide bounding solubilities for plutonium to be used in Performance Assessment modeling rather than trying to identify an exact concentration of plutonium in pore fluids released from a tank at any given time. This document also considers suggestions and opportunities for improvement regarding the plutonium modeling assumptions from the Plutonium Solubility Peer Review Report, LA-UR-12-00079.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Influence of Solidification Velocity on Partitioning and Precipitate Evolution in a Multicomponent, Soft Magnetic Alloy Processed by Laser Melting

Multicomponent alloys have recently been shown to overcome the structural-functional barrier associated with soft magnetic materials. Here, single laser tracks have been used to investigate the effects of solidification velocity on the Al 7 Fe 32.6 Co 27.7 Ni 27.7 Ta 5 (at pct) alloy. Ta-rich cell wall partitioning was shown to affect the final distribution and size of the precipitating L1 2 phase, after aging. These findings demonstrate that solidification rate control offers the potential to tailor localized performance in alloys with size-dependent precipitation properties.

Brookins, Jeffrey M. [Oak Ridge National Laborator↗

Particulate matter increases beta-amyloid and activated glial cells in hippocampal tissues of transgenic Alzheimer's mouse: Involvement of PARP-1

Highlights: • Particulate matter (PM) activates PARP-1 in neuronal cells. • PM increases beta-amyloid in ex vivo hippocampus of 3xTg-AD mouse. • PM activates glial cells in ex vivo hippocampus of 3xTg-AD mouse. • Pharmacological inhibition of PARP-1 reverses PM-induced AD pathologies. • PARP-1 inhibition would be a promising approach counteracting PM's neurotoxicity. Exposure to air pollutants, such as particulate matter (PM), has been implicated in neurodegenerative disorders including Alzheimer's disease (AD). However, direct effects of PM on production of β-amyloid (Aβ), a key pathogenic molecule in AD, and its underlying mechanism are still elusive. Given PM's potential to induce oxidative stress in other tissues, we hypothesized that poly(ADP-ribose) polymerase (PARP-1) might be involved in PM-induced neurotoxicity. To address this, we used an ex vivo model of AD, the organotypic hippocampal slice tissue culture from old (12-14 months-of-age) triple transgenic 3xTg-AD mice. First, we observed that fine PM (aerodynamic diameter < 4 μm) can dose-dependently activate PARP-1 and decrease NAD{sup +} levels in Neuro2A cells. PARP-1 activation did occur under concentrations of PM which did not affect cell viability. Next, we observed that direct treatment of PM increased Aβ levels and activated glial cells in the ex vivo hippocampal tissues of 3xTg-AD mice. PM-induced glial activation was most prominent in CA1 region of the hippocampal tissue. Notably, we found that pharmacological inhibition of PARP-1 reversed both PM-induced Aβ increase and glial activation, arguing the possible involvement of PARP-1 in PM-induced AD pathogenesis. Our findings suggest that PARP-1 might be a potential molecular target, responsible for mediating negative effects of PM on the brain. Modulating PARP-1 activity could be a promising approach to prevent or alleviate PM-related environmental neurotoxicity which could initiate AD pathogenesis.

60 APPLIED LIFE SCIENCES↗

Microstructure evolution, grain morphology variation and mechanical property change of Cu-Sn intermetallic joints subjected to high-temperature aging

Highlights: • The δ-Cu{sub 41}Sn{sub 11} could be formed by reaction of 11Cu{sub 3}Sn + 9Cu → Cu{sub 41}Sn{sub 11} during aging above 350 °C. • The temperature effects on the growth rate and grain morphology of Cu{sub 41}Sn{sub 11} phase were found. • The Cu{sub 41}Sn{sub 11} joints with refined grains exhibited higher hardness and shear strength. • The Cu{sub 41}Sn{sub 11} joints exhibited a combination of transgranular and intergranular fracture during shear test. - Abstract: In this work, the aging treatment was carried out on full Cu{sub 3}Sn joints at different temperatures for various durations, the microstructure evolution, grain morphology variation and mechanical property change of joints were investigated. The temperature effects on the growth rate and grain morphology of Cu{sub 41}Sn{sub 11} phase were found: The complete transformation from Cu{sub 3}Sn phase to Cu{sub 41}Sn{sub 11} phase in joints needed 300 h at 400 °C, but 4 h at 500 °C. The Cu{sub 41}Sn{sub 11} phase formed at 400 °C consisted of columnar grains with an average width of 23.5 μm, while the Cu{sub 41}Sn{sub 11} phase formed at 500 °C consisted columnar grains with an average width of 8.5 μm. The average hardness and shear strength values of the Cu{sub 41}Sn{sub 11} joints formed at 400 °C were 432.5 HV and 62 MPa, while the joints formed at 500 °C exhibited higher hardness and shear strength (451.5 HV and 65 MPa). Besides, the Cu{sub 41}Sn{sub 11} joint was found to exhibit a combination of transgranular and intergranular fracture during shear test.

36 MATERIALS SCIENCE↗

A KINEMATIC APPROACH TO ASSESSING ENVIRONMENTAL EFFECTS: STAR-FORMING GALAXIES IN A z {approx} 0.9 SpARCS CLUSTER USING SPITZER 24 {mu}m OBSERVATIONS

We present an infrared study of a z = 0.872 cluster, SpARCS J161314+564930, with the primary aim of distinguishing the dynamical histories of spectroscopically confirmed star-forming members to assess the role of cluster environment. We utilize deep MIPS imaging and a mass-limited sample of 85 spectroscopic members to identify 16 24 {mu}m bright sources within the cluster, and measure their 24 {mu}m star formation rates (SFRs) down to {approx}6 M{sub Sun} yr{sup -1}. Based on their line-of-sight velocities and stellar ages, MIPS cluster members appear to be an infalling population that was recently accreted from the field with minimal environmental dependency on their star formation. However, we identify a double-sequenced distribution of star-forming galaxies among the members, with one branch exhibiting declining specific SFRs with mass. The members along this sub-main sequence contain spectral features suggestive of passive galaxies. Using caustic diagrams, we kinematically identify these galaxies as a virialized and/or backsplash population. Moreover, we find a mix of dynamical histories at all projected radii, indicating that standard definitions of environment (i.e., radius and density) are contaminated with recently accreted interlopers, which could contribute to a lack of environmental trends for star-forming galaxies. A cleaner narrative of their dynamical past begins to unfold when using a proxy for accretion histories through profiles of constant (r/r{sub 200}) Multiplication-Sign ({Delta}v/{sigma}{sub v}); galaxies accreted at earlier times possess lower values of (r/r{sub 200}) Multiplication-Sign ({Delta}v/{sigma}{sub v}) with minimal contamination from the distinct infalling population. Therefore, adopting a time-averaged definition for density (as traced by accretion histories) rather than an instantaneous density yields a depressed specific SFR within the dynamical cluster core.

79 ASTRONOMY AND ASTROPHYSICS↗

Kinematic modeling of the Milky Way using the RAVE and GCS stellar surveys

We investigate the kinematic parameters of the Milky Way disk using the Radial Velocity Experiment (RAVE) and Geneva-Copenhagen Survey (GCS) stellar surveys. We do this by fitting a kinematic model to the data and taking the selection function of the data into account. For stars in the GCS we use all phase-space coordinates, but for RAVE stars we use only (ℓ, b, v {sub los}). Using the Markov Chain Monte Carlo technique, we investigate the full posterior distributions of the parameters given the data. We investigate the age-velocity dispersion relation for the three kinematic components (σ {sub R}, σ{sub φ}, σ {sub z}), the radial dependence of the velocity dispersions, the solar peculiar motion (U {sub ☉}, V {sub ☉}, W {sub ☉}), the circular speed Θ{sub 0} at the Sun, and the fall of mean azimuthal motion with height above the midplane. We confirm that the Besançon-style Gaussian model accurately fits the GCS data but fails to match the details of the more spatially extended RAVE survey. In particular, the Shu distribution function (DF) handles noncircular orbits more accurately and provides a better fit to the kinematic data. The Gaussian DF not only fits the data poorly but systematically underestimates the fall of velocity dispersion with radius. The radial scale length of the velocity dispersion profile of the thick disk was found to be smaller than that of the thin disk. We find that correlations exist between a number of parameters, which highlights the importance of doing joint fits. The large size of the RAVE survey allows us to get precise values for most parameters. However, large systematic uncertainties remain, especially in V {sub ☉} and Θ{sub 0}. We find that, for an extended sample of stars, Θ{sub 0} is underestimated by as much as 10% if the vertical dependence of the mean azimuthal motion is neglected. Using a simple model for vertical dependence of kinematics, we find that it is possible to match the Sgr A* proper motion without any need for V {sub ☉} being larger than that estimated locally by surveys like GCS.

79 ASTRONOMY AND ASTROPHYSICS↗

SPIRAL PATTERNS IN PLANETESIMAL CIRCUMBINARY DISKS

Planet formation scenarios and the observed planetary dynamics in binaries pose a number of theoretical challenges, especially concerning circumbinary planetary systems. We explore the dynamical stirring of a planetesimal circumbinary disk in the epoch when the gas component disappears. For this purpose, following theoretical approaches by Heppenheimer and Moriwaki and Nakagawa, we develop a secular theory of the dynamics of planetesimals in circumbinary disks. If a binary is eccentric and its components have unequal masses, a spiral density wave is generated, engulfing the disk on a secular timescale, which may exceed 10{sup 7} yr, depending on the problem parameters. The spiral pattern is transient; thus, its observed presence may betray a system’s young age. We explore the pattern both analytically and in numerical experiments. The derived analytical spiral is a modified lituus; it matches the numerical density wave in the gas-free case perfectly. Using the smoothed particle hydrodynamics scheme, we explore the effect of residual gas on the wave propagation.

79 ASTRONOMY AND ASTROPHYSICS↗

A Sensitivity Study on Modeling Black Carbon in Snow and its Radiative Forcing over the Arctic and Northern China

Black carbon in snow (BCS) simulated in the Community Atmosphere Model (CAM5) is evaluated against measurements over Northern China and the Arctic, and its sensitivity to atmospheric deposition and two parameters that affect post-depositional enrichment is explored. The BCS concentration is overestimated (underestimated) by a factor of two in Northern China (Arctic) in the default model, but agreement with observations is good over both regions in the simulation with improvements in BC transport and deposition. Sensitivity studies indicate that uncertainty in the melt-water scavenging efficiency (MSE) parameter substantially affects BCS and its radiative forcing (by a factor of 2-7) in the Arctic through post-depositional enrichment. The MSE parameter has a relatively small effect on the magnitude of BCS seasonal cycle but can alter its phase in Northern China. The impact of the snow aging scaling factor (SAF) on BCS, partly through the post-depositional enrichment effect, shows more complex latitudinal and seasonal dependence. Similar to MSE, SAF affects more significantly the magnitude (phase) of BCS season cycle over the Arctic (Northern China). While uncertainty associated with the representation of BC transport and deposition processes in CAM5 is more important than that associated with the two snow model parameters in Northern China, the two uncertainties have comparable effect in the Arctic.

Artic↗

Structural transition kinetics and activated behavior in the superconducting vortex lattice

Using small-angle neutron scattering, we investigated the behavior of a metastable vortex lattice state in MgB 2 as it is driven towards equilibrium by an ac magnetic field. This shows an activated behavior, where the ac field amplitude and cycle count are equivalent to, respectively, an effective “temperature” and “time.” The activation barrier increases as the metastable state is suppressed, corresponding to an aging of the vortex lattice. Furthermore, we find a crossover from a partial to a complete suppression of metastable domains depending on the ac field amplitude, which may empirically be described by a single free parameter. This represents an unconventional kind of collective vortex behavior, not governed by pinning, most likely due to the nucleation and growth of equilibrium vortex lattice domains.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of a high-energy proton-irradiation dose on the electron mobility in n-Si crystals

n-Si single crystals produced by the floating zone method are studied. The concentration of electrons in the crystals is 6 Multiplication-Sign 10{sup 13} cm{sup -3}. The samples are irradiated with 25-MeV protons at 300 K. The irradiation dose is varied in the range (1.8-8.1) Multiplication-Sign 10{sup 12} cm{sup -2}. The measurements are carried out by means of the Hall technique in the range of temperatures T = 77-300 K. In samples irradiated with different proton doses, a sharp increase in the experimental effective Hall mobility {mu}{sub eff} or a deep minimum in the dependence {mu}{sub eff}(T) in the region of phonon scattering of electrons is observed immediately after irradiation or after aging of the samples, respectively. The observed effect is attributed to the formation of high-conductivity (metal-like) inclusions in the irradiated samples and to changes in the degree of screening of the inclusions by impurity-defect shells in relation to the irradiation dose, the time of natural aging, and the temperature of measurements. The impurity-defect shells are formed around metal-like inclusions during isochronal annealing or natural aging of the irradiated samples. It is suggested that metal-like inclusions formed in the n-Si crystals on irradiation with protons with the energy 25 MeV are atomic nanoclusters with an 80-nm radius.

36 MATERIALS SCIENCE↗

Aging Studies on Nitro-Plasticizer

Plasticizers are utilized with many polymers to increase fluidity. By adding a plasticizer to a polymer, the polymer changes from rigid and brittle to soft and flexible. NP is a nitro-plasticizer that is currently used with a wide variety of polymers. NP is a 50-50 mixture of bis(2,2–dinitropropyl) acetal (BDNPA) and bis(2,2 – dinitropropyl)formal (BDNPF) (Figure 1). Sometimes this combination is referred to as A/F but throughout the extent of this paper it will be referred to as NP. BDNPA and BDNPF have been researched separately to determine the decomposition rate of both compounds and what products are generated (3). BDNPF decomposes at a slower rate than BDNPA. It has been hypothesized that this is because BDNPF has a lower vapor pressure and is less sterically hindered (3). It is important to determine how the decomposition of NP will differ as it is a combination of both BDNPF and BDNPA. This particular combination of plasticizers is commonly used with polymers in explosive and propellant composite systems as an energetic plasticizer (3). Because of its applications; it is vital to study to effects of aging on NP to determine its stability over time. This research focuses on 3 and 6 month aged NP and the structural variations that occur due to the aging process. Previous studies suggest that NP is stable during low temperature storage (4), but this research focuses on the stability of NP at various different conditions to achieve the most comprehensive scope of the effect of the aging process. This is an ongoing process and this research will continue to be monitored for at least one year. Depending on the results obtained; the research may carry on for two years.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Outgassing of casted and 3D printed silicones

Outgassing of 3D printed and casted silica-filled silicones was studied using a standard ASTM E-595 procedure and a modified Soreq’s method that allows very sensitive measurements of the outgassing kinetics even at low temperatures, 20 – 50 °C. We studied three different silica-filled silicones, non-porous cased M9787, and 3D printed LL50 and 40P materials. The present report shows that vacuum outgassing products of polysiloxane-based materials include multiple species. In addition to chemisorbed and physisorbed water outgassing, previously studied by TPD, polymer fragments of varying sizes evaporate as well. The chemical composition of the condensable volatile species collected on a Germanium substrate, was analyzed by FTIR. It was shown that all studied materials produce mostly PDMS-based outgassing products that form stable droplet-like structure on the Ge substrate. The highest amount of the condensable volatile species was measured for LL50. Isothermal TGA in nitrogen atmosphere of the LL50 material was compared to the standard vacuum outgassing. The results of TGA showed lower mass loss and higher water regain. The kinetics of the outgassing at relatively low temperatures of 20, 30 and 50 °C was studied using Thermoelectric Quartz Crystal Microbalance (TQCM). The TQCM surface was held at -10 °C to enhance condensation of the outgassed moisture. The analysis presented here, when combined with the extensive previous work on moisture outgassing, provides a better understanding of the aging mechanism of polysiloxane-based materials. In this work we show that outgassing techniques, usually applied for qualification of polymers for space-related applications, may be used as a complementary method to study thermal degradation and aging of silica-based silicones. Our results indicate that the long-term degradation mechanics and thermal degradation products depend primarily on the chemical composition of silicone-based material and only slightly affected by the manufacturing process. Surprisingly, the surface-to-volume ratio of the 3D printed vs. casted/molded materials showed only minor effect on the outgassing kinetic parameters.

36 MATERIALS SCIENCE↗

Impact of a Locally Measured H {sub 0} on the Interpretation of Cosmic-chronometer Data

Many measurements in cosmology depend on the use of integrated distances or time, but galaxies evolving passively on a timescale much longer than their age difference allow us to determine the expansion rate H ( z ) solely as a function of the redshift–time derivative dz / dt . These model-independent “cosmic chronometers” can therefore be powerful discriminators for testing different cosmologies. In previous applications, the available sources strongly disfavored models (such as ΛCDM) predicting a variable acceleration, preferring instead a steady expansion rate over the redshift range 0 ≲ z ≲ 2. A more recent catalog of 30 objects appears to suggest non-steady expansion. In this paper, we show that such a result is entirely due to the inclusion of a high, locally inferred value of the Hubble constant H{sub 0} as an additional datum in a set of otherwise pure cosmic-chronometer measurements. This H {sub 0}, however, is not the same as the background Hubble constant if the local expansion rate is influenced by a Hubble Bubble. Used on their own, the cosmic chronometers completely reverse this conclusion, favoring instead a constant expansion rate out to z∼2.

79 ASTRONOMY AND ASTROPHYSICS↗

Mass loss in O-type stars - Parameters which affect it

Newly determined mass loss rates are presented for sixteen O-type stars in three open clusters. Combining the data with that already in the literature, no evidence is found that the rates are different in clusters with differing galactocentric distances and compositions, at least near the sun. There is still appreciable dispersion in the relationship between the mass loss rate and the stellar luminosity. It may be that the mass loss depends additionally on the stellar mass and/or radius, but these data cannot unequivocally indicate which physical dependence is correct. Evidence is found that a stellar wind increases as a massive star evolves from the zero-age main sequence.

Garmany, C. D.↗

Operator Localization of Virtual Objects

Errors in the localization of nearby virtual objects presented via see-through, helmet mounted displays are examined as a function of viewing conditions and scene content. Monocular, biocular or stereoscopic presentation of the virtual objects, accommodation (required focus), subjects'age, and the position of physical surfaces are examined. Nearby physical surfaces are found to introduce localization errors that differ depending upon the other experimental factors. The apparent physical size and transparency of the virtual objects and physical surfaces respectively are also influenced by their relative position when superimposed. Design implications are discussed.

Ellis, Stephen R.↗

Localization of Virtual Objects in the Near Visual Field (Operator Interaction with Simple Virtual Objects)

Errors in the localization of nearby virtual objects presented via see-through, helmet mounted displays are examined as a function of viewing conditions and scene content in four experiments using a total of 38 subjects. Monocular, biocular or stereoscopic presentation of the virtual objects, accommodation (required focus), subjects' age, and the position of physical surfaces are examined. Nearby physical surfaces are found to introduce localization errors that differ depending upon the other experimental factors. These errors apparently arise from the occlusion of the physical background by the optically superimposed virtual objects. But they are modified by subjects' accommodative competence and specific viewing conditions. The apparent physical size and transparency of the virtual objects and physical surfaces respectively are influenced by their relative position when superimposed. The design implications of the findings are discussed in a concluding section.

Ellis, Stephen R.↗

Large Impact Features on Ganymede and Callisto as Revealed By Geological Mapping and Morphometry

The icy Galilean satellites are host to a broad range of impact feature morphologies. Hypotheses seeking to explain the diversity of these impact features consider the effects of impact melt, the physical state of the subsurface at the time of impact, and the impactor characteristics. As part of a larger effort to assess the role of these factors in the formation and evolution of these impact features, we have performed topographic and geological mapping of 19 large impact features on Ganymede and Callisto. These are divided into two main morphological groups: craters (subdivided into pit, dome, and anomalous dome craters), and penepalimpsests/palimpsests. The transitions from pit, dome, to anomalous dome craters appear to be size-dependent up to diameters of ∼170 km. The morphologies of pit and dome craters appear to be independent of their age or geologic context. The impacts that formed them only affected a cold, rigid ice layer, with the development of pits and raised annuli on their floors possibly stemming from the evolution of a pocket of impact melt. The subdued rims and floors of anomalous dome craters indicate the increasing effect of a weak, warm ice layer on impact feature morphology with increasing size, but their prominent annuli and pits indicate that mobilization of impact melt is also a factor. The very low topographic relief of older penepalimpsests and palimpsests indicates that their impacts penetrated the ice shell to mobilize very large volumes of pre-existing liquid from a subsurface layer, with little contribution to the final feature morphology from impact melt. Penepalimpsests are distinguished from palimpsests by the higher frequency of concentric ridges within their interiors, indicating a generally more robust state of the subsurface that could better support the rotation and uplift of solid material during impact, even if a crater-like depression could not be supported. A few impact features seem to be transitional between anomalous dome craters and penepalimpsests, and the overlap of anomalous dome craters, penepalimpsests, and palimpsests in terms of diameter as well as age indicates that impactor size and subsurface properties over time are major factors in determining which of these morphologies emerges.

Oliver L White↗