Search NASA⌕ Search

SEARCH · Search NASA

Results for “Breeding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

2018 Site Environmental Report

The bald eagle (Haliaeetus leucocephalus) has been the proud national emblem of the United States of America since 1792. These majestic birds can have a wingspan from six to seven and a half feet and can live up to 20 years. They reach breeding age around four years of age and often mate for life, with nesting occurring in late winter. Eagles eat a variety of foods from fish to carrion. Eagle populations were historically impacted by shooting, the presence of heavy metals in waterways and, most significantly, by pesticides like DDT that caused thinning of egg shells. Here on Long Island, the bald eagle population has made a notable return, after being absent for nearly 100 years in New York State.

54 ENVIRONMENTAL SCIENCES↗

The Consortium for Advanced Sorghum Phenomics (CASP). Final report

The goal of CASP was to accelerate breeding of biomass sorghum [Sorghum bicolor (L.) Moench] by identifying genotypes exhibiting high yield under well-watered, pre- or post-drought and/or salinity-stress conditions. We did this by combining high-throughput, non-invasive drone phenotyping with genomics and molecular profiling. Field-based phenotyping utilized a multi-modal sensor suite of LiDAR, multispectral cameras, and thermal cameras mounted on a commercial drone to detect traits required for yield prediction and selection of drought and saline tolerant lines of sorghum. Traits of interest included plant height (PH), leaf area index (LAI), wet biomass (BMW), and biomass at 65% moisture (BM65) and were measured from emergence to harvest on a weekly basis over three growing seasons. The final output were measurements of traits on a plot-by-plot basis, identified by the plot ID used by the Proprietary data processing software enabled raw field data to be turned into plant traits and delivered to the PNNL and JGI within the same workday.

09 BIOMASS FUELS↗

Growth of New High-Quality and Large-Size Single Crystals via High Pressure Floating-Zone Technique

This award supports experimental materials physics research on a class of technologically relevant materials that cannot form under ambient conditions. With the complementary expertise at Louisiana State University (LSU) and infrastructure at Oak Ridge National Laboratory (ORNL), single crystals of these materials will be synthesized using the high-pressure floating-zone technique. Our ability to grow high-quality single crystals will facilitate advanced characterization of these materials and improve the scientific outcomes. In addition to in-house material characterization, the principle investigator will partner with scientists at ORNL and Brookhaven National Laboratory (BNL) to tackle materials problems using the state-of-the-art characterization techniques. This will allow us to explore the fundamental physics underlying the emergent phenomena only seen in materials prepared under extreme conditions. Our ultimate goal is to address one of the grand challenges of materials science: how do complex phenomena emerge from simple ingredients? The proposed project will also spearhead a unique opportunity to train “new breed” scientists, co-advised by experts at both LSU and U. S. Department of Energy National Laboratories. They will be essential for expanding materials physics research with ability to grow crystals, characterize their properties, and design new materials -- an imperative skill that is scarce in the U. S. scientific community.

36 MATERIALS SCIENCE↗

Mosquito Distribution and West Nile Virus Surveillance Results on the Nevada National Security Site in South Central Nevada

A 10-year study (2004-2013) was conducted to determine mosquito distribution and the prevalence of West Nile Virus (WNV) on the Nevada National Security Site (NNSS) in south central Nevada. Mosquito traps baited with dry ice were set overnight at sites where standing water provided potential breeding sites for mosquitoes. Captured mosquitoes were identified to species and tested for WNV. A total of 556 mosquitoes representing 6 species were captured and identified at 20 sites around the NNSS during 124 surveys. A vast majority (89%) of mosquitoes were Culex tarsalis. None of the mosquitoes tested were positive for WNV although 2 samples, both Culiseta inornata, were suspect for WNV in 2005 and 2006, both from Well 3 Pond. Additionally, 24 birds representing 5 species were opportunistically collected and tested for WNV with no positive results. Results from this study reveal patterns of mosquito distribution across the NNSS and suggest that NNSS workers have a very low risk of being exposed to WNV.

60 APPLIED LIFE SCIENCES↗

Development of Algal Biomass Yield Improvements in an Integrated Process (Final Report)

This project built on the success of Global Algae Innovations Algae Biomass Yield Phase 1 project to accelerate the commercialization of algal biofuels through development of an integrated, economical, photosynthetic, open raceway system to produce algal oil. Two parallel pathways to a biofuel were investigated. In the algal crude oil pathway, highlighted in blue, the dewatered algal biomass slurry is used as a feed to hydrothermal liquefaction to produce an algae crude oil and recycle aqueous stream. In the algal lipid oil pathway, highlighted in green, the algal biomass slurry is dried, and the oil is extracted to produce an algal lipid oil biofuel intermediate and a high protein algae meal co-product. Upgrading to drop-in fuels has been demonstrated for the biofuel intermediates in both pathways. Since the algal lipid oil pathway requires lipid accumulation, the productivity is generally lower than the algal crude oil pathway, but the required productivity for economical algal biofuel production is also lower because the coproduct value is greater. The outdoor cultivation was performed at the Kauai Algae Farm. The project team has expertise across the full breadth strain development, advanced algal cultivation, open raceway contamination control, CO 2 supply, harvesting, dewatering, extraction, hydrothermal liquefaction, technoeconomic analysis and life cycle analysis: Hildebrand laboratory at Scripps Institution of Oceanography – diatom strain development. Mayfield laboratory at UCSD - green algae strain development. TSD Management Associates- CO 2 supply, algal harvesting and dewatering, and algal drying and extraction. Qualitas - large-scale test site for algal harvesting technology. Texas A&M University - algal drying and extraction technology. Pacific Northwest National Laboratory - hydrothermal liquefaction technology. GE Water and Power - membrane technology. National Renewable Energy Laboratory - algal techno-economic analysis. Phase 1 of the project resulted in tremendous productivity and pre-processing improvements in an integrated, large-scale, low-cost cultivation and pre-processing process that moved algal technology closer to economic viability for biofuels than ever before. Phase 2 accomplishments further facilitate development of a commercial algal biofuel industry by adding: several top performing strains and strain development tools including breeding; open-pond cultivation innovations that achieved a 30% improvement in overall productivity, an 83% reduction in cost, and a 95% reduction in energy use relative to conventional technology; further improvements in harvesting that led to the Zobi harvester ® as a universal, economical, low energy, commercially available microalgae harvesting solution; breakthroughs in drying and extraction including a new low energy drying process and several new low energy extraction unit operations that together with the Zobi harvester ® achieve a 90% reduction in cost and 97% reduction in energy use relative to conventional technology. These improvements are sufficient to enable economical production of algae biofuel and protein meal co-product if the process were scaled up to a commercial-scale 5,000-acre algae farm.

09 BIOMASS FUELS↗

Genetics and Genomics of Pathogen Resistance in Switchgrass

This project investigates the genetic and genomic bases of resistance/tolerance to disease in switchgrass (Panicum virgatum) populations developed as bioenergy feedstock. The focus is placed populations adapted to the Central Great Plains derived from the hybridization of upland and lowland ecotypes, represented by cultivars Summer and Kanlow, respectively. Resistance was investigated against the rust disease caused by the fungus Puccinia novo-panici (syn. P emaculata) and mosaic disease caused by the virus complex of Panicum mosaic virus and its satellite. Objectives of the project were: 1) to elucidate the genetic and genomic bases of resistance/tolerance in locally adapted upland and lowland switchgrass breeding populations with contrasting disease symptoms under field conditions; 2) determine the molecular underpinnings of why cv Kanlow has broad resistance/tolerance to pathogens; and 3) discover the molecular differences that permit systemic viral infections in some switchgrass plants but not in other genetically-related plants.

09 BIOMASS FUELS↗

Nuclear Fuels and Reprocessing Technologies: A U.S. Perspective

Reprocessing and/or waste management issues are of concern to the “back end” of the nuclear fuel cycle. Of course, there are a great many “nuclear fuel cycle” scenarios to consider; if not in practice, then at least in theory. The simplest conceptually is the “once through” fuel cycle in which the spent fuel is discarded. The more complex fuel cycle scenarios involve reprocessing spent nuclear fuels and a family of nuclear reactor technologies to accommodate burning and breeding for various military and commercial needs. Therefore, the selection of a specific “fuel cycle” is what ultimately imposes the engineering requirements of the reprocessing and waste management technologies. No one part is independent of the other parts in a fuel cycle flowsheet; all parts are fully integrated. This paper presents a summary of radiochemical processes, nuclear reactor technologies, nuclear fuel types, and the reprocessing technologies that serve the different nuclear fuel types. Comprehending how this series of topics are related to each other is a prerequisite to understanding the requirements of any reprocessing strategy. The summary materials presented here are selective, as opposed to comprehensive. More detailed information on any one subject can be found in the reference materials.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

An Enhanced Safeguards Approach for Accelerator Driven Systems utilized to Close the Fuel Cycle

Further to our previous safeguards approach for Accelerator Driven Systems, which focused on estimates of fissile material production using relevant proton accelerator systems and corresponding safeguards needs for fuel storage, the subcritical reactor, and spent fuel storage material balances areas, this report is more expansive and considers utilization of ADS for either burning of transuranics or breeding of fissile materials. We find that the recycled fuels likely intended for ADS will be thermally and radioactively hot to such a degree that it is likely reprocessing and fuel fabrication will have to be co - located with the ADS reactor facility to avoid impractical hot fuel transportation issues. As such, we consider in detail the full ADS system to include material balance areas for spent fuel receiving, reprocessing, storage & cooling, fuel fabrication, subcritical reactor area, and waste storage & handling. Furthermore, aqueous - based separation methods like PUREX cannot tolerate the intense heat of the ADS fuels, so pyroprocessing will likely be required. With these considerations, we developed an Enhanced Safeguards Approach for ADS beyond the work done in our first report, and conclude that significant diagnostic development is needed , a nd provide safeguards recommendations. We have also included an appendix regarding some country programs, in particular the Chinese ADANES burner/breeder program a nd the Indian thorium - based breeder program.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Developing Advanced Genetic and Synthetic Biology Tools for Improved Algae Productivity

Under the UCSD-led Productivity Enhanced Algae and ToolKits (PEAK) project we sought to develop tools to enable the production of valuable co-products, as well as strategies to decrease the cost of cultivation, with an intended outcome of enabling the economic production of algae-based biofuel. We have developed new genetic tools and high throughput selection methods for eukaryotic green algae and used them to express a high value recombinant protein; a growth factor known as Osteopontin (OPN). Recombinant OPN protein expression levels were improved through a newly developed rapid breeding and mutagenesis strain improvement method to generate a robust strain capable of growing in outdoors raceway conditions in brackish water that tolerated high pH and large temperature swings. We further applied the new genetic tools to express recombinant protein in a recently bioprospected strain with even more robust growth characteristics. In response to the COVID-19 pandemic we used our improved workflow to rapidly express, purify, and characterize a recombinant SARS-CoV-2 spike protein Receptor Binding Domain (RBD) and demonstrate that it functionally interacts with its cognate human host receptor ACE2. The newly identified extremophile strain Chlamydomonas sp (402), both mating type (mt+) and mating type (mt-), have been deposited in the Chlamydomonas Resource Center (https://www.chlamycollection.org/), making them available world-wide with no restrictions. In addition, all of genetic tools are also deposited at this site and are also available world-wide with no restrictions.

09 BIOMASS FUELS↗

Identification of Adaptive Fungal Pathogen Resistance Loci in Switchgrass (Final Report)

Switchgrass (Panicum virgatum) has great potential as a sustainable bioenergy and bioproducts feedstock. However, there are a number of challenges that must be overcome to achieve this goal. One of the most significant challenges to switchgrass productivity are fungal pathogens, especially rusts and smuts. The primary goals of our project were to characterize the distribution of fungal pathogens on switchgrass across central North America and to identify genetic loci that control resistance to those pathogens. The research was primarily conducted with large common garden plantings of a switchgrass, distributed along a latitudinal gradient from South Texas to South Dakota. By conducting this research simultaneously at 10 field locations, we were able establish the relative contributions of genes and the environment to pathogen resistance. Through this research, we identified multiple genomic regions (loci) that contribute to rust resistance and found that the effects of these loci on resistance were highly influenced by field site location. Our research revealed that most of the rust damage to switchgrass from Texas to the northern United States is caused by a single fungal species, Puccinia novopanici. Therefore, genetic variation within this species and/or local environmental conditions are responsible for the inconsistent efficacy of pathogen resistance loci. We are currently investigating these two non-mutually exclusive hypotheses. In addition to our studies of rust pathogens, we were able to identify resistance loci for the head smut fungal pathogen Tilletia maclaganii. The funding from this grant facilitated a collaboration with the DOE Joint Genome Institute to develop a reference genome for T. maclaganii. A reference genome will make population genetic studies of this smut fungus possible, which in turn will facilitate the development of strategies to mitigate its impact. Overall, the funded research has greatly advanced our understanding of the genetic basis of fungal pathogen resistance switchgrass. This knowledge will help facilitate the breeding of more resistant cultivars and thus, increase the productivity of swichgrass generally.

09 BIOMASS FUELS↗

Small Mammal Prey Study for the Mexican Spotted Owl at Two Locations at Los Alamos National Laboratory

In New Mexico, Mexican spotted owls (Strix occidentalis lucida) are typically found in rocky canyons consisting of mixed-conifer forests that have experienced minimal human disturbance. At Los Alamos National Laboratory (LANL), Mexican spotted owls have been found breeding and foraging in habitats consistent with their known biology, but face the impact of human encroachment in the surrounding upland habitat. Little is known about the prey base present within the Laboratory’s vast forests. In anticipation of expanding human development in proximity to known occupied owl habitat, the goal of our study was to evaluate the small mammal prey base available to Mexican spotted owls at the Laboratory and to assess prey availability, diversity and composition. We sampled two study plots within the Laboratory’s forests for small mammals in 2021. Study plots were situated in conifer, deciduous, mixed conifer-deciduous and mixed oak. Our small mammal trapping efforts and SCR modeling revealed site-specific differences in prey base diversity, abundance and density between the unoccupied Pajarito Canyon and nearby occupied Mortandad Canyon site. These results highlight how managing tracts of land for small mammal prey base may overlap with goals set forth by researchers for Mexican spotted owl habitat needs. We recommend further trapping efforts to better understand prey availability in occupied and unoccupied sites at LANL as well as further investigation of prey selection through the dissection of pellets found in the areas surrounding known nesting locations.

54 ENVIRONMENTAL SCIENCES↗

Towards durable resistance to Septoria stem canker and leaf spot: A molecular understanding of resistance (Final Technical Report)

To identify, validate, and functionally characterize alleles that confer resistance to Septoria canker and leaf spot in Populus. The proposed research will elucidate a major mechanism of resistance to Sphaerulina musiva, the major limiting factor to plantations in eastern North America. Genome-wide association mapping, CRISPR/Cas9, and protein-protein assays will be used, enabling marker-aided breeding, reducing costs, and accelerating development of resistant varieties.

59 BASIC BIOLOGICAL SCIENCES↗

Report on Fuel Cycle Facility Requirements for Deployment of Demonstration Reactors and Potential Evolutionary Fuel Cycle Scenarios

A series of fuel cycle scenarios studies were performed to inform on fuel cycle capacities and facilities needed for large-scale deployment of the Advanced Reactor Demonstration Program (ARDP) reactors and potential future evolutionary fuel cycle scenarios. The reactor deployment and evolutionary fuel cycle scenarios from the present to 2100 were developed based on the following assumptions: 1) achievement of a net-zero emissions economy in the United States by 2050, which requires a nuclear energy generation capacity of ~250 GWe by 2050, 2) the U.S. economic growth of 1% per year from 2051 to 2100, which results in ~340 GWe of nuclear energy capacity in 2100, and 3) commercial-scale recycling and high burnup fuel technologies are available after 2050. Thus, evolutionary fuel cycles with those advanced nuclear technologies start after 2050. A single once-through fuel cycle scenario was assumed from the present to 2050 to achieve a net-zero emissions economy in the United States, and the following four evolutionary fuel cycle scenarios from 2051 to 2100 were considered, 1) Once through fuel cycle with ARDP reactors (Natrium and Xe-100), 2) Once-through fuel cycle with Breed-and-Burn (B&B) fast reactors, 3) Recycling fuel cycle of used metallic fuel in fast reactors, and 4) Recycle fuel cycle of both used uranium oxide and metallic fuels in fast reactors. The projected front-end and back-end fuel cycle capacity demands are compared with the current domestic and global (if needed) fuel cycle capacities.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Rays for Roots - Integrating Backscatter X-Ray Phenotyping, Modeling and Genetics to Increase Carbon Sequestration and Switchgrass Resource Use (Final Report)

To increase carbon (C) deposition in the soil and enhance crop resource use efficiency, characterizing root form and function is essential. Several root and soil traits have been linked to increased root-to-soil C transfer. Technology that could provide high-resolution characterization of many of these traits in field conditions would revolutionize our ability to study and understand how to increase C sequestration. In this effort, we developed an initial early prototype backscatter X-ray system for non-destructive imaging of root traits. We collected initial backscatter X-ray data in field and lab settings and carried out early analysis of these data. Along with this prototype, we also developed a suite of root phenotyping approaches including advanced minirhizotron image analysis, soil core imaging, and mesocosm imaging. Minirhizotron (MR) tubes are clear tubes inserted into the soil in the field and used to image roots and the surrounding soil. Our team has developed deep learning-based methods that can segment roots from soil that can learn from imprecise image-level labels. The ability to learn or fine-tune our deep learning algorithms from image-level labels allows easier and faster application of these approaches to new locations and new plant species. We have successfully implemented and applied our MR analysis approaches to thousands of switchgrass MR images collected across geographical regions. An advantage of MR imaging is the ability to collect root and soil images over time. Our soil core analysis included collecting hundreds of soil core samples from harvested switchgrass fields and imaging these cores with both X-ray CT and backscatter X-ray imaging. Initial segmentation approaches for the X-ray CT images of these cores have been developed and applied. An advantage of soil core analysis is that it preserves the three-dimensional structures of the roots and soil in the core collected. Our group also developed photogrammetry-based mesocosm root imaging and phenotyping approaches. In this approach, a plant was grown in a large mesocosm with a three-dimensional grid of thin supporting lines inserted throughout the mesocosm. After the plant (and, correspondingly, the root architecture is grown and established) the soil media was removed and the supporting lines approximately preserved the three-dimensional root architecture. Then, we applied photogrammetry techniques to create a three-dimensional digital representation of the root architecture for which we developed analysis algorithms including skeletonization. We carried out our phenotyping development with powerful switchgrass resources and physiological and agroecosystem modeling to deliver novel technology. This project contributes to multiple ARPA-E missions including reduction of foreign imports of energy, reduction of energy-related emissions including greenhouse gases, and ensuring that the United States maintains a technological lead in developing and deploying advanced energy technology. Furthermore, the developed tools could transform public and private plant breeding and could be broadly applicable to other crops and, potentially, other application areas. Our team of engineers, plant and soil scientists, and modelers i) developed an early prototype backscatter X-ray platform that can operate in field conditions; ii) developed a suite of root phenotyping and characterization approaches as described above; iii) developed and carried out plant biology and physiology roots studies and; iv) developed and implemented mechanistic physiological modeling.

42 ENGINEERING↗

Optimal Chloride Salt Mixture for a Fusion Blanket

Deuterium-tritium fusion reactors cannot operate for a significant period without a closed tritium fuel cycle, according to a recent National Academies of Sciences (NAS) report on bringing fusion reactors to the US electrical grid. This fact places breeder blankets as one of the foundational systems for self-sustained fusion reactor operation. The typical functional requirements for a breeder blanket system include producing tritium, absorbing kinetic energy, transporting thermal energy, and being environmentally attractive. State-of-the-art research on liquid blankets has converged to primarily focus on (LiF) 2 and BeF 2 (FLiBe) molten salts and a metallic eutectic of lead and lithium (PbLi), but “virtually all of the technologies related to the tritium fuel cycle are at a low technological readiness level”. This work sought to explore optimum blanket configurations as it aligned with the Oak Ridge National Laboratory (ORNL) FY 2023 Laboratory Directed Research and Development Program’s research priority of developing and expanding the current understanding of fusion blanket science and technology. This purpose of this work was to address ORNL research priorities and NAS recommendations by investigating novel liquid blanket materials that could provide self-sustaining operation and draw on experience from research on molten salts used for advanced fission reactors, concentrated solar, and thermal energy storage. The hypothesis when proposing this research was that there could be chloride-based blanket designs that can exceed the tritium breeding ratios of (FLiBe) molten salt blankets while reducing the use of Be (FLiBe), avoiding the generation of HF (FLiBe), and minimizing magnetohydrodynamic (MHD)-perturbed flow fields (PbLi). The fastest and most cost-effective path to deploying liquid fusion breeder blankets could be from maximizing the synergistic technological overlap between fusion, fission, concentrated solar, and thermal energy storage industries.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Complete Evaluation on Advanced Reactor Machine Learning Subversion Attacks (Final)

Navigating through the world of Artificial Intelligence (AI) in nuclear reactors and their Instrumentation and Control (I&C) systems demands a careful, deliberate journey. AI’s capability to manage massive datasets and streamline control systems has indeed carved out a significant role in various sectors, including nuclear energy. However, while AI, and particularly Large Language Models (LLMs), bring a lot to the table in terms of operational efficiency and anomaly detection, they also expose the sector to a new breed of cybersecurity threats, like Inference Attacks, Adversarial Attacks, and Trojan Attacks. This guide is designed to be a straightforward manual, diving deep into the intertwining worlds of AI and cybersecurity within nuclear reactors, and tailoring insights for three crucial audiences: I&C Vendors/Developers, Nuclear Regulators, and Nuclear Reactor Operators and Cyber Defense Teams. (1) Section 2, directed at I&C Vendors/Developers, will provide a clear and focused look at several cybersecurity attacks, offering practical recommendations and detailed scenarios related to AI cybersecurity. This section isn’t just about identifying problems but also about giving solid, usable solutions. (2) Section 3, meant for Nuclear Regulators, gets straight to the point about regulations, policy suggestions, and guidelines that are needed to lay down a robust, secure, and ethical foundation for the application of AI in nuclear operations. The focus is on making sure that everything adheres to international standards and laws while being practicable and clear-cut. (3) Section 4, aimed at Nuclear Reactor Operators and Cyber Defense Teams, offers an exhaustive exploration and technical reports, with clear recommendations and scenario analyses vital to protect operational environments and guarantee the secure application of AI in nuclear reactor operations. The goal is simple: as we step into an era where AI becomes a fundamental element of our technological and energy infrastructures, this guide is here to act as a clear, direct handbook, ensuring that AI is implemented within the nuclear sector in a manner that is secure, responsible, and practical. It’s about striking a balance – optimizing the undeniable benefits offered by AI while securing and shielding against potential cyber threats as we move through this new and complex landscape.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Savannah River National Laboratory – General Fusion 2023 INFUSE Report (Rev.1)

This report describes the results from an INFUSE research project, where Savannah River National Laboratory (SRNL) in collaboration with General Fusion (GF) used process modeling to understand and optimize commercial power plant (CPP) fuel cycle designs based on parameters provided by GF. The study primarily focused on two candidate fuel cycles with different blanket materials, one with a lead lithium eutectic (LLE) blanket and the other with a pure lithium (Li) blanket. LLE benefits from a low melting point, favorable neutronics, and lower reactivity, but liquid lithium has the potential for higher tritium breeding ratios (TBR) and does not poison the plasma as a high Z contaminant. It was found that the main differences between LLE and Li designs are the extraction technologies required to remove tritium from the blanket and the amount of tritium and its distribution within the facility. More than 80% of the in-process tritium inventory for the LLE design is contained in the isotope separation system, while for the Li design, over 60% of the in-process tritium inventory is contained within the blanket material. This is due to significant tritium retention by Li. For the Li blanket, the burden of tritium processing rests on the blanket extraction technology rather than the traditional exhaust processing route. Thus, the blanket extraction technology is a main driver of tritium inventory in the Li system and determines the subsequent interface with the tritium processing plant.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Introduction to Special Issue on the Early History of Nuclear Fusion

This introductory paper to the special issue of Fusion Science and Technology commemorates early research on fusion conducted at Los Alamos (the singular entity denoted Los Alamos Laboratory/Los Alamos Scientific Laboratory/Los Alamos National Laboratory at different times is designated “Los Alamos” in this paper) in support of the eventual H-bomb program. We survey the historical origins of the thermonuclear program, what was known of fusion reactions at the outbreak of the war, and the remarkable breakthroughs involving particularly the prospect of deuterium-tritium (DT) reactions conducted during the war, and we summarize the papers in this volume. Much of the nuclear fusion technical history presented herein has not been previously reported. Papers describe aspects of fusion science during these days, on shock hydrodynamics and on electron-radiation coupling, and on nuclear physics including the discoveries of resonances in both the DT cross section and in the lithium tritium-breeding cross section. Three papers follow our colleague Mark Paris’s finding Arthur Ruhlig’s 1938 paper on the first observation of DT fusion: one on how it influenced subsequent Manhattan Project research, another on a modern calculation of that historic experiment, and a third that has repeated the experiment using modern experimental capabilities. Other papers discuss how the first H-bomb test, Ivy Mike, led to the discovery of the new elements einsteinium and fermium and how the DT fusion processes played a key role in our universe’s development after the Big Bang. We also present a paper that analyzes the pioneering Cambridge University 1934 experiment by Marcus Oliphant, Paul Harteck, and Ernest Rutherford where deuterium-deuterium fusion was first observed and that describes how Ernest Lawrence missed identifying fusion in 1933. Finally, we present a summary of early concepts for controlled fusion energy that grew out of wartime discussions at Los Alamos. The papers show how J. Robert Oppenheimer played a leading technical role in the early developments of the H-bomb, before his later opposition—our first paper in this issue addresses the U.S. Department of Energy’s 2022 vacation of the earlier 1954 decision to revoke his security clearance.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗