Search NASA⌕ Search

SEARCH · Search NASA

Results for “CARRIER MODULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

High Electron Mobility in SiGe/Si n-MODFET Structures on Sapphire Substrates

For the first time, SiGe/Si n-Modulation Doped Field Effect Transistors (n-MODFET) structures have been grown on sapphire substrates. Room temperature electron mobility value of 1271 square centimeters N-sec at an electron carrier density (n(sub e) = 1.33x10(exp 12) per square centimeter)) of 1.6 x 10(exp 12) per square centimeter was obtained. At 250 mK, the mobility increases to 13,313 square centimeters/V-sec (n(sub e)=1.33x10(exp 12) per square centimeter)) and Shubnikov-de Haas oscillations appear, showing excellent confinement of the two-dimensional electron gas.

Mueller, Carl H.↗

A New OEO Design Using Optical Phase Modulation and Modulation Suppression

We present the design for a phase-modulated Opto-Electronic Oscillator (OEO) that incorporates asymmetric Mach- Zehnder (AMZ) interferometers as phase demodulators together with PM modulation suppression. The new design promises to obtain in the electro-optical domain the low-noise advantages previously achieved in RF and microwave oscillators by the use of carrier suppression but which have been achieved only to a limited extent in OEO's.

oscillator↗

Cold air quench control of local crystallization environment in fully air-processed carbon-based perovskite solar cells

Carbon-based perovskite solar cells (C-PSCs) present a low-cost route to efficient photovoltaic technology. Gas quenching is an essential process commonly used for solvent extraction in scalable module fabrication using solution processes, but film quality remains highly sensitive to the localized environmental processing temperature, especially during intermediate phase transitions before perovskite film high temperature annealing. In this study, we introduce a cold air quench strategy to precisely control the local crystallization temperature that simultaneously promotes uniform crystallization and facilitates strain relaxation in fully air-processed C-PSCs. It is found that implementing dry air at 10 °C as the quenching gas yields a champion power conversion efficiency (PCE) of 20.52 %, with preferential (110) orientation and reduced, homogenized in-plane strain. This newly developed technique of a cost-effective low temperature air quenching process also enhances carrier lifetime, reduces interface recombination, and improves charge extraction. Furthermore, this work presents cold air quenching as a scalable, economic method to control perovskite crystallization and strain in C-PSC fabrication, advancing the industrial viability of high-performance perovskite modules.

14 SOLAR ENERGY↗

Charge Transport in Twisted Organic Semiconductor Crystals of Modulated Pitch

Many molecular crystals (approximately one third) grow as twisted, helicoidal ribbons from the melt, and this preponderance is even higher in restricted classes of materials, for instance, charge-transfer complexes. Previously, twisted crystallites of such complexes present an increase in carrier mobilities. In this paper, the effect of twisting on charge mobility is better analyzed for a monocomponent organic semiconductor, 2,5-bis(3-dodecyl-2-thienyl)-thiazolo[5,4-d]thiazole (BDT), that forms twisted crystals with varied helicoidal pitches and makes possible a correlation of twist strength with carrier mobility. Films are analyzed by X-ray scattering and Mueller matrix polarimetry to characterize the microscale organization of the polycrystalline ensembles. Carrier mobilities of organic field-effect transistors are five times higher when the crystals are grown with the smallest pitches (most twisted), compared to those with the largest pitches, along the fiber elongation direction. A tenfold increase is observed along the perpendicular direction. Simulation of electrical potential based on scanning electron microscopy images and density functional theory suggests that the twisting-enhanced mobility is mainly controlled by the fiber organization in the film. A greater number of tightly packed twisted fibers separated by numerous smaller gaps permit better charge transport over the film surface compared to fewer big crystallites separated by larger gaps.

36 MATERIALS SCIENCE↗

Selective modulation of electronic transport in VO 2 induced by 10 keV helium ion irradiation

Vanadium dioxide (VO 2 ) manifests an abrupt metal–insulator transition (MIT) from monoclinic to rutile phases, with potential use for tunable electronic and optical properties and spiking neuromorphic devices. Understanding pathways to modulate electronic transport in VO 2 , as well as its response to irradiation (e.g., for space applications), is critical to better enable these applications. In this work, we investigate the selective modulation of electronic transport in VO 2 films subject to different 10 keV helium ion (He + ) fluences. Under these conditions, the resistivity in the individual monoclinic and rutile phases varied by 50%–200%, while the MIT transformation temperature remains constant within 4 °C independent of irradiation fluence. Importantly, different trends in the resistivity of the monoclinic and rutile phases were observed both as a function of total He fluence as well as in films grown on different substrates (amorphous SiO 2 /Si vs single crystal Al 2 O 3 ). Through a combination of measurements including majority carrier sign via Seebeck, low frequency noise, and TEM, our investigation supports the presence of different kinds of point defects (V in; O in), which may arise due to grain boundary defect interactions. Our work suggests the utility of He irradiation for the selective modulation of VO 2 transport properties for neuromorphic, in contrast to other established but non-selective methods, like doping.

36 MATERIALS SCIENCE↗

Electrochemically-Modulated Separation and Mass Spectrometric Analysis of Actinides in Difficult Matrices

Electrochemically-modulated separations (EMS) are a straightforward means of isolating and pre-concentrating elements for on-line mass spectrometric analysis. Elements are accumulated at electrochemical working electrodes and subsequently released into a clean carrier solution for spectroscopic analysis. EMS can employ solely aqueous chemistry and uses electrochemical redox adjustment of oxidation state to “trigger” reversible chelation / complexation. Less tractable elements (e.g., uranium and plutonium), based on redox potentials, can therefore be extracted from difficult matrices following redox adjustment and chelation with electrode chelation sites. Simply put, separation is achieved by a small voltage step that is applied to the target electrode to turn “on” or “off” the specific actinide affinity of an electrode. This separation technology employs both redox and chelation chemistry to effect highly selective accumulation of target actinides, and results in element separation, matrix elimination and analyte preconcentration. Prior studies have developed protocols and preliminary insight into EMS processes for U and Pu. U and Pu are released upon oxidation and reduction, respectively, allowing complete separation due to widely divergent redox potentials. T The coupling of EMS on-line with ICP-MS for elemental and isotopic analysis of uranium and plutonium is presented, with a focus on analytical performance metrics and applicability to safeguards and process monitoring via nondestructive analyses.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Ultrafast hot-hole injection modifies hot-electron dynamics in Au/p-GaN heterostructures

A fundamental understanding of hot-carrier dynamics in photo-excited metal nanostructures is needed to unlock their potential for photodetection and photocatalysis. Despite numerous studies on the ultrafast dynamics of hot electrons, so far, the temporal evolution of hot holes in metal-semiconductor heterostructures remains unknown. Here, we report ultrafast (t < 200 fs) hot-hole injection from Au nanoparticles into the valence band of p-type GaN. The removal of hot holes from below the Au Fermi level is observed to substantially alter the thermalization dynamics of hot electrons, reducing the peak electronic temperature and the electron-phonon coupling time of the Au nanoparticles. First-principles calculations reveal that hot-hole injection modifies the relaxation dynamics of hot electrons in Au nanoparticles by modulating the electronic structure of the metal on timescales commensurate with electron-electron scattering. Overall, these results advance our understanding of hot-hole dynamics in metal-semiconductor heterostructures and offer additional strategies for manipulating the dynamics of hot carriers on ultrafast timescales. Photo-excited gold nanoparticles are shown to provide ultrafast and efficient hot-hole injection to the valence band of p-type GaN, substantially altering hot-electron dynamics in the nanoparticles and forming a basis to design hot-hole-based optoelectronics.

36 MATERIALS SCIENCE↗

Limits to Electrical Mobility in Lead-Halide Perovskite Semiconductors

Semiconducting polycrystalline thin films are cheap to produce and can be deposited on flexible substrates, yet high-performance electronic devices usually utilize single crystal semiconductors, owing to their superior charge-carrier mobilities and longer diffusion lengths. Here we show that the electrical performance of polycrystalline films of metal-halide perovskites (MHPs) approaches that of single crystals at room temperature. Combining temperature-dependent terahertz conductivity measurements and ab initio calculations we uncover a complete picture of the origins of charge-carrier scattering in single crystals and polycrystalline films of CH 3 NH 3 PbI 3 . We show that Fröhlich scattering of charge carriers with multiple phonon modes is the dominant mechanism limiting mobility, with grain-boundary scattering further reducing mobility in polycrystalline films. We reconcile the large discrepancy in charge-carrier diffusion lengths between single crystals and films by considering photon reabsorption. Thus, polycrystalline films of MHPs offer great promise for devices beyond solar cells, including light-emitting diodes and modulators.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Protonic solid-state electrochemical synapse for physical neural networks

Physical neural networks made of analog resistive switching processors are promising platforms for analog computing. State-of-the-art resistive switches rely on either conductive filament formation or phase change. These processes suffer from poor reproducibility or high energy consumption, respectively. Herein, we demonstrate the behavior of an alternative synapse design that relies on a deterministic charge-controlled mechanism, modulated electrochemically in solid-state. The device operates by shuffling the smallest cation, the proton, in a three-terminal configuration. It has a channel of active material, WO 3 . A solid proton reservoir layer, PdH x , also serves as the gate terminal. A proton conducting solid electrolyte separates the channel and the reservoir. By protonation/deprotonation, we modulate the electronic conductivity of the channel over seven orders of magnitude, obtaining a continuum of resistance states. Proton intercalation increases the electronic conductivity of WO 3 by increasing both the carrier density and mobility. This switching mechanism offers low energy dissipation, good reversibility, and high symmetry in programming.

36 MATERIALS SCIENCE↗

High-repetition rate, CEP-stable shortwave infrared source with two-cycle pulses for field-resolved spectroscopy

We report on a passively carrier-envelope phase (CEP)-stable optical parametric amplifier generating two-cycle pulses at 2060 nm with energies of up to 2.25 µJ operating at a repetition rate of 400 kHz, specifically designed for applications in field-resolved spectroscopy. The measured pulse duration is 13.6 fs, resulting in two cycles of the carrier wave. Due to the robust CEP-stable front-end design, we achieve an open-loop CEP stability of 250 mrad (rms) and the capability for fast CEP modulation.

47 OTHER INSTRUMENTATION↗

Effect of detector dead time on the performance of optical direct-detection communication links

Avalanche photodiodes (APDs) operating in the Geiger mode can provide a significantly improved single-photon detection sensitivity over conventional photodiodes. However, the quenching circuit required to remove the excess charge carriers after each photon event can introduce an undesirable dead time into the detection process. The effect of this detector dead time on the performance of a binary pulse-position-modulated (PPM) channel is studied by analyzing the error probability. It is shown that, when background noise is negligible, the performance of the detector with dead time is similar to that of a quantum-limited receiver. For systems with increasing background intensities, the error rate of the receiver starts to degrade rapidly with increasing dead time. The power penalty due to detector dead time is also evaluated and shown to depend critically on badkground intensity as well as dead time. Given the expected background strength in an optical channel, therefore, a constraint must be placed on the bandwidth of the receiver to limit the amount of power penalty due to detector dead time.

Chen, C.-C.↗

Phase ambiguity resolution for offset QPSK modulation systems

A demodulator for Offset Quaternary Phase Shift Keyed (OQPSK) signals modulated with two words resolves eight possible combinations of phase ambiguity which may produce data error by first processing received I(sub R) and Q(sub R) data in an integrated carrier loop/symbol synchronizer using a digital Costas loop with matched filters for correcting four of eight possible phase lock errors, and then the remaining four using a phase ambiguity resolver which detects the words to not only reverse the received I(sub R) and Q(sub R) data channels, but to also invert (complement) the I(sub R) and/or Q(sub R) data, or to at least complement the I(sub R) and Q(sub R) data for systems using nontransparent codes that do not have rotation direction ambiguity.

Nguyen, Tien M.↗

High-contrast, large optical bandwidth field-induced guide/antiguide modulator

An electric field induced-guide/antiguide optical intensity modulator which has a very wide optical bandwidth from 1 to 1.55/micron which is the largest ever reported before for an intensity modulator. A TE mode ON/OFF ratio larger than 21 dB at 1.15 micron, and a propagation loss about 1 dB at 1.3 micron has been measured. The electrooptic effects, along with carrier effects have been exploited to increase the refractive index under the guide and adjacent antiguide electrodes by applying reverse biases to them.

Huang, T. C.↗

Quantum efficiency investigations of type-II InAs/GaSb midwave infrared superlattice photodetectors

We present in this paper a comparison between different type-II InAs/GaSb superlattice (T2SL) photodiodes and focal plane array (FPA) in the mid-wavelength infrared domain to understand which phenomenon drives the performances of the T2SL structure in terms of quantum efficiency (QE). Our measurements on test photodiodes suggest low minority carrier diffusion length in the “InAs-rich” design, which penalizes carriers' collection in this structure for low bias voltage and front side illumination. This analysis is completed by a comparison of the experimental data with a fully analytic model, which allows to infer a hole diffusion length shorter than 100 nm. In addition, measurements on a FPA with backside illumination are finally presented. Results show an average QE in the 3–4.7 μm window equal to 42% for U{sub bias} = −0.1 V, 77 K operating temperature and no anti-reflection coating. These measurements, completed by modulation transfer function and noise measurements, reveal that the InAs-rich design, despite a low hole diffusion length, is promising for high performance infrared imaging applications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Graphene-based modulation-doped superlattice structures

The electronic transport properties of graphene-based superlattice structures are investigated. A graphene-based modulation-doped superlattice structure geometry is proposed consisting of periodically arranged alternate layers: InAs/graphene/GaAs/graphene/GaSb. The undoped graphene/GaAs/graphene structure displays a relatively high conductance and enhanced mobilities at increased temperatures unlike the modulation-doped superlattice structure, which is more steady and less sensitive to temperature and the robust electrical tunable control on the screening length scale. The thermionic current density exhibits enhanced behavior due to the presence of metallic (graphene) monolayers in the superlattice structure. The proposed superlattice structure might be of great use for new types of wide-band energy gap quantum devices.

36 MATERIALS SCIENCE↗

Ferroelastic Domain-Induced Electronic Modulation in Halide Perovskites

Lead halide perovskites have emerged as promising materials for optoelectronic applications due to their exceptional properties. In the all-inorganic CsPbBr 3 perovskites, ferroelastic domains formed during phase transitions enhance bulk transport and emissive efficiency. However, the microscopic mechanisms governing carrier dynamics remain poorly understood. In this study, we employ cathodoluminescence (CL) and micro-Raman spectroscopy to image and investigate the electronic properties of the ferroelastic domain walls in CsPbBr 3 single crystals. CL measurements reveal a reduced emissive yield and a slight redshift in emission at the domain walls. Further, micro-Raman studies provide spatially resolved mapping of vibrational modes, exhibiting second-order phonon modes localized at the domain boundaries. In conclusion, our findings suggest that electron–phonon coupling at the twin domain walls plays a critical role in facilitating efficient charge separation, thereby improving the optoelectronic performance of the CsPbBr 3 perovskites.

Carrier dynamics↗

Rapid Stoichiometry Control in Cu 2 Se Thin Films for Room-Temperature Power Factor Improvement

Cu 2 Se thin films provide a promising route toward relatively safe, sustainable and solution processed thermoelectric (TE) modules in contrast to more expensive and toxic materials currently on the market such as Bi2Te3. Cu 2 Se is known in the TE community for its high performance at high temperature and has recently attracted attention from its large theoretically predicted figure of merit at room temperature. Unfortunately, one of the main limitations encountered so far in Cu 2 Se thin films is that the carrier concentrations are not optimized for TE operation after solution processing. In this work, we conduct a comprehensive study of the structural, optical, and TE properties of Cu 2 Se thin films and demonstrate that nonoptimized carrier concentrations in these films lead to observations of poor performance at room temperature. Through a simple soaking procedure in a Cu+ ion solution for only a few minutes, we demonstrate a 200-300% increase in power factor. This soaking process pushes the carrier concentration of the Cu 2 Se thin film toward its optimal value for TE operation and marks the highest TE performance for any solution processed Cu 2 Se thin film at room temperature thus far. If the performance can be further optimized at room temperature, Cu 2 Se thin films will be the material of choice to utilize in TE modules for powering miniature electronics and sensors, which has been an increasingly popular and rapidly expanding market.

36 MATERIALS SCIENCE↗